You spit a wad of paper horizontally
from a height of 1.8 m. The wad
leaves your mouth with a velocity of
6 m/s. How long does it take the
wad to hit the ground?

Explanation:

Since the neutron is only moving at 1000 m/s, we are going to ignore the relativistic effects on its mass and energy. The mass of a neutron in [tex]m_n = 1.67×10^{-27}\:\text{kg}[/tex] so its kinetic energy KE is

[tex]KE = \frac{1}{2}m_nv^2[/tex]

[tex]\:\:\:\:\:\:\:\:= \frac{1}{2}(1.67×10^{-27}\:\text{kg})(10^3\:\text{m/s})^2[/tex]

[tex]\:\:\:\:\:\:\:\:= 8.35×10^{-22}\:\text{J}[/tex]

A photon's energy E is defined as

[tex]E = h\nu[/tex]

where [tex]\nu[/tex] is the photon's frequency and h is the Planck's constant. Solving for the frequency, we get

[tex]\nu = \dfrac{E}{h} = \dfrac{8.35×10^{-22}\:\text{J}}{6.63×10^{-34}\:\text{J-s}}[/tex]

[tex]\:\:\:\:\: = 1.26×10^{12}\:\text{Hz}[/tex]

which is right around the infrared radiation range.

-cant travel through space since there's no molecules to travel through

-sound travels 4.3 times faster in water than air

-sounds are waves that pass through our ears via vibrations and travel by vibrations of molecules

-different types of sound like audible, inaudible, infrasonic, ultrasonic,

-sounds waves are either longitudinal, mechanical and pressure waves

-sound travels at 767 miles per hour

Answer:

a vacuum tube is NOT a solid state component

I think force can accelerate

Explanation:

i think force of an object

Answer:

batteries in parallel connection and bulbs in serial connection

To get the dimmest bulb with two batteries and two bulbs you would connect the batteries in parallel and the bulbs in series.

When two-terminal components and electrical networks that can be connected in series or parallel. This will result in two terminals in the electrical network, and may themselves participate in a series or parallel topology. When a two-terminal "object" is an electrical component or electrical network is a matter of perspective.

A circuit is said to be in series when the same current flows through all the components in the circuit where the current has only one path. A circuit is said to be parallel when there are multiple paths for the electric current to flow through it where the components which are part of the parallel circuit will have a constant voltage across all their ends.

Thus, to get the dimmest bulb with two batteries and two bulbs you would connect the batteries in parallel and the bulbs in series.

Learn more about Parallel and series circuits, here:

https://brainly.com/question/3386214

#SPJ5

The work done by the man against friction is 4,192.86 J.

The given parameters;

The work done by the man against friction is calculated as follows;

[tex]W = F \times d \times cos(75)\\\\W = 540 \times 30 \times cos(75)\\\\W = 4,192.86 \ J[/tex]

Thus, the work done by the man against friction is 4,192.86 J.

Learn more here:https://brainly.com/question/19498865

Answer:

In this problem basically we will use directions to find displacement and distance .

(Keep in mind that displacement is vector while distance is scalar quantity)  

And then we will use displacement and distance to find average velocity and average speed.

Explanation:

Km values are standardized because half the Vmax (Vmax/2) is more informative than Vmax. This value (Km) can be used to calculate the affinity of the enzyme by a given substrate.

The Km (Michaelis constant) of the enzyme refers to the value in which the concentration of substrate is equal to half of its maximum velocity (Vmax/2).

This value (Km) is inversely proportional to the affinity of an enzyme by a given substrate.

An enzyme showing a high Km also exhibits a low affinity for its specific substrate, and thereby this enzyme requires a high concentration of the substrate to reach its maximum velocity (Vmax).

In consequence, the Km value is a more informative value than the maximum velocity (Vmax), which only indicates the concentration of an enzyme catalyzing a reaction under ideal conditions.

Learn more in:

https://brainly.com/question/5182881

Answer/Explanation:

It False, because if You Round Both of them..

1.25= 1.30

1.04= 1.00

it's like, 1 dollar and 4 cents; compared to 1 dollar and 25 cents. Obviously 25 cents is a lot more than 4 cents.

Since energy is lost in the roller coaster due to friction, the hill should little lower than the starting height since some of the kinetic energy at the bottom of the first hill is lost  due to friction so it will not have as much potential energy at the top of the next hill.

A roller coaster is a good way to demonstrate the principle of conservation  of energy. Recall that energy is neither created nor destroyed but can be converted from one form to another.

In a roller coaster, all the heights are not the same because energy is lost along the line. Therefore, the students must bear in mind that  the hill should be at least a little lower than the starting height because some of the kinetic energy at the bottom of the first hill will be converted to other types of energy due to friction so it will not have as much potential energy at the top of the next hill.

Learn more: https://brainly.com/question/14281129

From Young's single slit experiment, the distance away from the wall will be 1.068 m

Given that 587.9 nm of wavelength of light passes through a single slit 0.73 mm wide, it creates a diffraction pattern.

From the question, the following parameters are given:

The wavelength of the light λ  =  587.9 nm

The width of the slit a = 0.73 mm

Fringe width X = 0.86 mm

The distance away from the wall D = ?

The fringe width is related to the wavelength  of the light source by the equation:

X = Dλ ÷ a

Substitute all the parameters into the formula

0.83 × [tex]10^{-3}[/tex] = 587.9 × [tex]10^{-9}[/tex] D ÷ 0.73 ×

Cross multiply

587.9 × [tex]10^{-9}[/tex] D = 6.278 × [tex]10^{-7}[/tex]

make D the subject of the formula

D = 6.278 × [tex]10^{-7}[/tex] ÷  587.9 × [tex]10^{-9}[/tex]

D = 1.068 m

Therefore, the distance away from the wall is 1.068 m

Learn more here: https://brainly.com/question/23801391

If the first minimum is [tex]0.86 mm[/tex] from the central maximum, the distance away is 1.07 meters.

Given the data in the question;

From Thomas Young's single slit experiment:

[tex]\frac{a*y}{L} = m * \lambda[/tex]    

Where a is the width of the slit, y is first minimum, L is the distance, m is the order number and λ is the wavelength.

We substitute our values into the equation

[tex]\frac{0.00073m\ *\ 0.00086m}{L} = 1\ *\ ( 5.879*10^{-7}m)\\\\\frac{0.0000006278m^2}{L} = 5.879*10^{-7}m\\\\L = \frac{0.0000006278m^2}{5.879*10^{-7}m} \\\\L = 1.07m[/tex]

Therefore, if the first minimum is [tex]0.86 mm[/tex] from the central maximum, the distance away is 1.07 meters.

Learn more: https://brainly.com/question/16051099

[tex]▪▪▪▪▪▪▪▪▪▪▪▪▪  {\huge\mathfrak{Answer}}▪▪▪▪▪▪▪▪▪▪▪▪▪▪[/tex]

Acceleration due to gravity on that planet is half than that of om earth ~

that is ~

And it's weight is equal to ~

now, As we know ~

here ,

let find the mass of stone ~

Mass of the stone is 100 kg ~

I hope it helped

Explanation:

Fgravity = G*(mass1*mass2)/D²

so, if you double one of the masses, what does that do to our equation ?

Fgravitynew = G*(2*mass1*mass2)/D²

due to the commutative property of multiplication

Fgravitynew = 2* G*(mass1*mass2)/D² = 2* Fgravity

so, the correct answer will be 2×45 = 90 units.

Answer:

velocity is a vector quantity

Explanation:

velocity is a vector quantity because it has a mass and a direction

Answer:

Speed is the time rate at which an object is moving along a path, while velocity is the rate and direction of an object's movement.

Explanation:

Explanation:

here the file has everything

Answer:

physics that deals with the mechanical action or relations of heat.

Answer:

Explanation:

d = ½(2.0)4² - ½(2.0)3² = 7 m

22.5 J

Explanation:

Given:

x = 3 m

[tex]k = 5\:\text{N/m}[/tex]

The spring potential energy [tex]PE_s[/tex] is

[tex]PE_s = \frac{1}{2}kx^2 = \frac{1}{2}(5\:\text{N/m})(3\:\text{m})^2[/tex]

[tex]\:\:\:\:\:\:\:=22.5\:\text{J}[/tex]

Answer:

A IS THE ANSWER

Explanation:

HOPE IT HELPS AND PLEASE MARK AS BRAINLIST

Answer:

1.  1, 2, 4 all show some form of refraction as the bending of a light ray when passing from one media to another.

Explanation:

Number 4 is the most accurate as it also shows some light being reflected and the bending of the refracted light ray in the correct direction for going from a medium of low refractive index (air) into a higher refractive index material (crown glass)

Total liquid: 73 + 25 = 98 ml

Percent juice = (25/98) x 100 = 25.5 %

The expression for the speed of waves in materials allows us to find the result for the speed of sound in aluminum is:

The speed of a wave in a material is determined by the relationship between its volumetric modulus and its density, it is given by the expression.

               v = [tex]\sqrt{ \frac{B}{\rho} }[/tex]  

where v is the speed of the wave in the material (sound), B is the volume modulus and ρ the density.

They indicate that the volumetric or elastic modulus of aluminum is;

            B = 6.89 10⁴ Mpa ( [tex]\frac{10^6 \ Pa}{1 \ MPa}[/tex] ) = 6.89 10¹⁰ Pa

The density of aluminum is tabulated  ρ = 2.7 10³ kg / m³

We calculate.

              v = [tex]\sqrt{ \frac{6.89 \ 10^{10} }{2.7 \ 10^3 }}[/tex]  

              v = 5.05 10³ m / s

In conclusion using the expression for the speed of waves in materials we can find the result for the speed of sound in aluminum is:

     v = 5050 m / s

Learn more about the speed of sound here:  brainly.com/question/6840608

Answer:

Heat Loss = 5 kg * 700 deg K * 220 J / (kg*deg K) = 7.70E5 J

Since there are 4.186 J/cal

Heat Loss = 7.70E5J / 4.186 J/cal = 1.84E5 cal

Heat Gain = 2000 g * 85 deg K / cal / (deg K g) + M * 540 cal/g

Heat Gain = 1.70E5 cal + M * 540 cal/g

M = (1.84 - 1.70) E5 g / 540

25.9 g

25.9 g or 25.9 cm^3 or .0259 L   of water will boil away

Answer:

Explanation:

Summing moments about the CG to zero will show that the two normal forces are equal and have a value of FL = FR = 684/2 = 342 N

Pressure on the left

PL = 342 / 6.20e-4 = 551,612.9032... = 5.5e5 Pa

Pressure on the right

PR = 342 / 9.20e-4 = 371,739.1304... = 3.7e5 Pa

A) The force from the left tire is; FL = 342 N

B) The pressure from the left tire is; PL = 551613 N/m²

C) The force from the right tire is; FR = 342 N

D) The pressure from the right tire is; PR = 371739 N/m²

We see that;

FL and FR are upward forces

W is the downward force.

We know that in equilibrium;

Sum of upward forces = sum of downward forces

Thus;

FL + FR = W

We are given W = 684 N

Since W is at the center, it means that FL = FR. Thus;

FL = FR = 684/2

FL = FR = 342 N

We are given;

Contact area of left tire; AL = 6.2 × 10⁻⁴ m²

Contact area of right tire; AR = 9.2 × 10⁻⁴ m²

Formula for pressure is;

Pressure = Force/Area

Pressure on the left tire;

PL = FL/AL

PL = 342/(6.2 × 10⁻⁴)

PL = 551613 N/m²

Pressure on the t right tire;

PR = FR/AR

PR = 342/(9.2 × 10⁻⁴)

PR = 371739 N/m²

Read more at; https://brainly.com/question/21584729

The modern atomic model is called the nuclear atomic model.

Therefore the correct answer is option C.

There are many types of atomic models proposed in past based on their individual assumptions and the experimentations

John Dalton's atomic model.

The Plum Pudding Model, developed by J.J. Thomson,

Rutherford's model provided an explanation for the presence of a nucleus inside the atom.

In accordance with the current atomic model, atoms have a nucleus made up of protons and neutrons and an ethereal gradient or cloud surrounding them that houses electrons;

The modern atomic model is called the nuclear atomic model.

Thus, the correct answer is option C.

To learn more about the atomic models here, refer to the link;

brainly.com/question/9145431

#SPJ2