Answer:
.............................
A 12 N force is used to extend a spring with a spring constant of 84 N/m. Calculate the extension of the spring.
Answer:
72n
Explanation:
More potential energy can be stored by moving against the magnetic force closer to a magnet?
Answer:
if your saying can it? then yes or if you are asking what type of magnetic force then its fr its actual self magnetic force
Explanation:
There are no risks when taking medication to treat anxiety.
Please select the best answer from the choices provided.
T
F
Answer:
False
Explanation:
Answer:
The answer is False
Explanation:
Imagine a monkey is sitting inside a barrel turned on its side. A cruel elephant pushes the barrel down a hill and the monkey starts to roll inside the barrel. This particular monkey gets motion sickness, and an outside observer has noticed that if the monkey spins more than once per second, the monkey will likely vomit. The barrel rolls perfectly down the slope (without slipping) and the outside observer calculates the angular acceleration of the barrel to be 1.2rad/s2. The barrel has a diameter of 1.5 m.
(a) How long will it take for the monkey to spin fast enough to vomit? (b) How far will the monkey have rolled before vomiting?
(c) How many times will the monkey have made a complete circle before vom- iting?
Hi there!
We can begin by converting "spinning once per second" to angular velocity:
[tex]\frac{1rev}{1s} * \frac{2\pi rad}{1rev} = 2\pi rad/sec[/tex]
(a)
As we are given the angular acceleration, we can calculate the time using the following equation:
ωf = ωi + αt
There is an initial angular velocity of 0 rad/sec, so:
ωf = αt
2π/1.2 = t
t = 5.236 sec
(b)
We can use the following rotational kinematic equation to first solve for the angular displacement:
θ = ωit + 1/2αt²
The initial velocity is 0 rad/sec, so plug in values:
θ = 1/2(1.2)(5.236²)
θ = 16.449 rad
Convert to linear distance using the following:
d = θr
d = 1.5m, so r = 1.5/2 = 0.75m
d = 16.449(0.75) = 12.337m
(c)
Find the amount of revolutions by converting radians to revolutions:
[tex]16.449 rad * \frac{1rev}{2\pi rad} = \large\boxed{2.618 rev}[/tex]
OR, 2.618 times.
some properties of the particles that are sources of electric charge include
plz help, dont need to do the last question
Answer:
Explanation:
I dont understand what its saying .....?
A ____ is a region where jets of gas from young stars impact and heat the gas surrounding the young star.
PLEASE PLEASE PLEASE HELP ME!!!
Answer: Levers
Explanation: Levers lifte
the machines arm
3. What happens if an object has a negative acceleration?
Answer:
They will go backwards?
Explanation:
If positive they go forward but is negative they go backwards.
Which statement indicates that motion has occurred?
A. The reference point has changed.
B. The position of the object has changed.
C.The object has not changed.
D. The object being described has changed
The spark plugs are threaded into the top of each cylinder and provide a place for the spark to jump within the ________.
Answer:
"the spark plug gap"
The plug provides a gap between the input voltage and the ground supplied by the car chassis.
11. A box with a mass of 1.0 kg is resting on a horizontal surface and the coefficient of friction between the block and the surface is 0.20. It is accelerated by attaching a 1.5 kg mass, as shown in the diagram. Assume that the pulley is frictionless and that the cord has negligible mass.
a. What is the acceleration of the box? What is the tension?
Answer:
We know that the force pulling the box in the positive x direction has a magnitude of m g sin 30 . Using Newtons Second Law, F = ma , we just need to solve for a :
ma=mgsin30
a=gsin30
=(10m/s2)(0.500)
=5m/s2
Answer:
A force is applied acting to the right. Assume that friction is negligible. Ikg 0.5N. For each question, one or more features of the system.
Explanation:hope this helps
Is s=[tex]\frac{Ft^{2} }{2m}[/tex] a correct conversion from a=[tex]\frac{at^{2} }{2}[/tex]?
I just substituted "a" as [tex]\frac{F}{m}[/tex]
Answer:
well your substitution method is correct but make sure to double check the original formula
______is the rate of change of velocity. A,speed. B,distance. C,acceleration. D,force
Explanation:
c) aceleración
The student investigates how the resistance of a thermistor varies with temperature. The student has a power supply, a thermistor, an ammeter, a voltmeter and some connecting leads. Describe an investigation the student could carry out to measure the resistance of a thermistor between –10 °C and 70 °C.
Your answer should include:
1. Any other apparatus the student will need
2. The measurements to be taken
3. How the data should be processed.
(This question is worth 6 marks on my assignment so I just really want to get down the best possible answer for it.)
The characteristics of the thermistors allow to design an experiment to analyze the dependence of resistance with temperature;
1) We set up the circuit
2) We look for the current of the circuit and we keep it fixed.
3) We look for the thermistor resistances for each temperature.
4) Plot Resistance versus Temperature.
A Thermitor is an element whose resistance changes with temperature, for example a platinum resistance.
An experiment that we can carry out to measure is to set up the attached circuit where we have:
A DC power supply. A resistor to control the maximum current in the circuit and avoid thermal problems in the thermistor. A thermistor. A thermometer placed next to the thermistor. A source of heat under the thermistor under a glass with ice and water, but without affecting the other elements of the circuit.
Let's start by looking for the current in the circuit.
In thermistors, the resistance for room temperature is given, so if we measure the voltage across the fixed resistor, we can shrink the voltage across the thermistor.
[tex]V_{source} = V_R + V_{therm} \\V_{therm} = V_{source} - V_R \\ i = \frac{V_{therm} }{R_{therm}}[/tex]
This current remains fixed, since the fixed resistance is greater than the resistance of the thermistor throughout the range.
Second step.
Now we can change the temperature that is measured in the thermometer, for each temperature the voltage in the fixed resistance is measured, the resistance in the thermistor is calculated.
[tex]R_{therm} = \frac{V_{source} - V_R}{i}[/tex]
Third step.
We end with a graph of resistance versus temperature of the curve obtained, it is possible to understand the behavior of the resistance of the thermistor with temperature.
In conclusion with the characteristics of thermistors we can design an experiment to analyze the dependence of resistance with temperature:
1) We set up the circuit
2) We look for the current of the circuit and we keep it fixed.
3) We look for the thermistor resistances for each temperature.
4) Plot Resistance versus Temperature.
Learn more about thermistors here: brainly.com/question/15690488
Which object has the most thermal energy?
A. A 6 kg rock at 10°C
B. A 10 kg rock at 10°C
C. A6 kg rock at 15°C
D. A 10 kg rock at 15°C
Answer:
D is the answer
Explanation:
D is the most highest one so
the answer is D
Answer:
10 kg rock at 15 degrees celcius
Define power and explain how to determine power. (4 points)
The definition of power is operating electrically or having strength or force. An example of power is the functioning of a gasoline-driven saw or tool. Or Power is related to other quantities; for example, the power involved in moving a ground vehicle is the product of the traction force on the wheels and the velocity of the vehicle. The output power of a motor is the product of the torque that the motor generates and the angular velocity of its output shaft. Likewise, the power dissipated in an electrical element of a circuit is the product of the current flowing through the element and of the voltage across the element.
Which of the following is a defense technique to protect computers from incoming risks? *
Answer:
having a secure firewall
Explanation:
A firewall validates access by assessing this incoming traffic for any price malicious like hackers and malware that would infect your computer.
what makes us think that the star system cygnus x-1 contains a black hole?
Answer:
Explanation:
What makes us think that the star system Cygnus X-1 contains a black hole? It emits X-rays characteristic of an accretion disk, but the unseen star in the system is too massive to be a neutron star.
Does a moving charge experiences a force in magnetic field? Explain
For a boiling kettle draw a sankey diagram to show where The energy goes
Answer:
draw the picture / (.) (.) \ Patrick star
An object's _____ energy that is used to perform work is equal to its potential energy plus its kinetic energy.
The time (t) required to empty a tank varies inversely as the rate (r) of pumping. If a
pump can empty a tank in 3 hours at a rate of 400 gallons per minute, how long will it
take to empty a tank at 600 gallons per minute?
Answer:
T = C / R t = time, C =constant of proportionality, R = rate
180 min = C / 400 gal/min
C = 72000 gal to empty tank
T = 72000 gal / 600 gal/min = 120 min = 2 hrs
Almost all living things depend on the process of ____________________ to supply them with the energy they need.
A.
photosynthesis
B. heterotroph
A 100 kg roller coaster comes over the first hill at 2 m/sec (vo). The height of the first hill (h) is 20 meters. See roller diagram below.
1) Find the total energy for the roller coaster at the initial point.
2) Find the potential energy at point A using the PE formula.
3) Use the conservation of energy to find the kinetic energy (KE) at point B.
4) Find the potential energy at point C.
5) Use the conservation of energy to find the Kinetic Energy (KE) of the roller coaster at point C.
6) Use the Kinetic Energy from C, find velocity of the roller coaster at point C.
For the 100 kg roller coaster that comes over the first hill of height 20 meters at 2 m/s, we have:
1) The total energy for the roller coaster at the initial point is 19820 J
2) The potential energy at point A is 19620 J
3) The kinetic energy at point B is 10010 J
4) The potential energy at point C is zero
5) The kinetic energy at point C is 19820 J
6) The velocity of the roller coaster at point C is 19.91 m/s
1) The total energy for the roller coaster at the initial point can be found as follows:
[tex] E_{t} = KE_{i} + PE_{i} [/tex]
Where:
KE: is the kinetic energy = (1/2)mv₀²
m: is the mass of the roller coaster = 100 kg
v₀: is the initial velocity = 2 m/s
PE: is the potential energy = mgh
g: is the acceleration due to gravity = 9.81 m/s²
h: is the height = 20 m
The total energy is:
[tex] E_{t} = KE_{i} + PE_{i} = \frac{1}{2}mv_{0}^{2} + mgh = \frac{1}{2}*100 kg*(2 m/s)^{2} + 100 kg*9.81 m/s^{2}*20 m = 19820 J [/tex]
Hence, the total energy for the roller coaster at the initial point is 19820 J.
2) The potential energy at point A is:
[tex] PE_{A} = mgh_{A} = 100 kg*9.81 m/s^{2}*20 m = 19620 J [/tex]
Then, the potential energy at point A is 19620 J.
3) The kinetic energy at point B is the following:
[tex] KE_{A} + PE_{A} = KE_{B} + PE_{B} [/tex]
[tex] KE_{B} = KE_{A} + PE_{A} - PE_{B} [/tex]
Since
[tex] KE_{A} + PE_{A} = KE_{i} + PE_{i} [/tex]
we have:
[tex] KE_{B} = KE_{i} + PE_{i} - PE_{B} = 19820 J - mgh_{B} = 19820 J - 100kg*9.81m/s^{2}*10 m = 10010 J [/tex]
Hence, the kinetic energy at point B is 10010 J.
4) The potential energy at point C is zero because h = 0 meters.
[tex] PE_{C} = mgh = 100 kg*9.81 m/s^{2}*0 m = 0 J [/tex]
5) The kinetic energy of the roller coaster at point C is:
[tex] KE_{i} + PE_{i} = KE_{C} + PE_{C} [/tex]
[tex] KE_{C} = KE_{i} + PE_{i} = 19820 J [/tex]
Therefore, the kinetic energy at point C is 19820 J.
6) The velocity of the roller coaster at point C is given by:
[tex] KE_{C} = \frac{1}{2}mv_{C}^{2} [/tex]
[tex] v_{C} = \sqrt{\frac{2KE_{C}}{m}} = \sqrt{\frac{2*19820 J}{100 kg}} = 19.91 m/s [/tex]
Hence, the velocity of the roller coaster at point C is 19.91 m/s.
Read more here:
https://brainly.com/question/21288807?referrer=searchResults
I hope it helps you!
Andrew skis down a hill.
Andrew starts from the top of the hill and his speed increases as he goes downhill.
He controls his speed and direction by using his skis.
He brings himself to a stop at the bottom of the hill.
Describe the energy changes that happen between starting and stopping.
Explanation:
gravitational potential energy at the top of the hill, which transforms into kinetic energy as he moves bottom of the hill
that's mean potential energy transfoms into kinetic energy
His potential energy is converted into kinetic energy when his speed increases as he goes downhill.
What is mechanical energy?Mechanical energy is the combination of all the energy in motion represented by total kinetic energy and the total potential energy stored energy in the system which is represented by total potential energy.
Total mechanical energy is s the sum of all the kinetic as well as potential energy stored in the system.
ME = KE + PE
When Andrew skis down a hill then he had stored potential energy due to the height of the hill and his gravitational weight,
Due to the height of the slope and his weight, Andrew had potential energy stored when he skied down it.
As he descended the hill, his speed increased, transforming this potential energy into kinetic energy.
Learn more about mechanical energy from here,
brainly.com/question/12319302
#SPJ2
eleven wa=eighs 47 kg. her height is 1.63 m. what is her bmi
Answer:
17.7kg/[tex]m^{2}[/tex]
Explanation:
BMI =
= [tex]\frac{weight (kg)}{height (m) . height (m)}[/tex]
= 47kg/(1.63m×1.63m)
= 17.689kg/[tex]m^{2}[/tex]
≈ 17.7kg/[tex]m^{2}[/tex]
how many cubic objects of volume 2cm cube can be started in a room of dimension 2m by 3m by 4m
Answer:
12,000,000 boxes
Explanation:
the volume of the room can be found by using the equation for volume of a rectangular box:V=LxWxH
where:
L=2m
W=3m
H=4m
(it doesn't really matter which is which since it is multiplication)
when we multiply our values (2m*3m*4m) we get 24cubic meters
now we need to convert cubic meters to cubic centimeters
each cubic meter is 1,000,000 cubic centimeter we multiply 24 by 1,000,000 and we get: 24,000,000 cubic centimeters (cc)
dividing 24,000,000 by 2 (since each box is 2cc) we get 12,000,000
so, we know we can fit 12,000,000, 2 cubic centimeter boxes in this room
Julie blows a bubble. At first, the pressure of the gas in the bubble is 4kPa. The bubble floats into the air and expands. When it gets to the top of a tree the bubble has a pressure of 2kPa and a volume of 3.5m³. Assuming a constant temperature, what was the volume in m³ of the bubble when it was first blown? Give your answer to three significant figures.
Answer:
P V = N R T
P1 V1 = P2 V2 assuming N, R, and T remain constant
V1 = (P2 / P1) V2
V1 = (2 kPa / 4 k Pa) 3.5 m3
V1 = 3.5 m^3 / 2 = 1.75 m^3
What is the equation for density?
O D= m
V
O D= V
-
m
O D= m
O D= { mu?
2