33 mL volume of 0.166 M Na₃PO₄ solution is necessary to completely react with 95.4 mL of 0.107 M CuCl₂.
To determine the volume of 0.166 M Na₃PO₄ solution needed to react with 95.4 mL of 0.107 M CuCl₂, we can use the balanced chemical equation for the reaction between CuCl₂ and Na₃PO₄
3CuCl₂ + 2Na₃PO₄ → Cu₃(PO₄)₂ + 6NaCl
From the balanced equation, we can see that 2 moles of Na₃PO₄ are required to react with 3 moles of CuCl₂. Therefore, we can use the following formula to calculate the volume of Na₃PO₄ solution needed
V(Na₃PO₄) = (n(CuCl₂) × V(CuCl₂) × 2) / (3 × M(Na₃PO₄))
where; V(Na₃PO₄) is the volume of 0.166 M Na₃PO₄ solution needed (in mL)
n(CuCl₂) is the number of moles of CuCl₂ present (in mol)
V(CuCl₂) is the volume of 0.107 M CuCl₂ solution (in mL)
M(Na₃PO₄) is the molarity of the Na₃PO₄ solution (in mol/L)
Put the given values into formula, we have;
V(Na₃PO₄) = (0.107 mol/L × 0.0954 L × 2) / (3 × 0.166 mol/L)
V(Na₃PO₄) = 0.033 L or 33 mL (rounded to 2 significant figures)
Therefore, 33 mL volume will be needed.
To know more about volume here
https://brainly.com/question/1578538
#SPJ4
Did aqueous methanol, CH3OH, have the same conductivity value as aqueous ethylene glycol, C2H6O2? Explain.
No, aqueous ethylene glycol and methanol don't have the same conductivity level.
What is aqueous methanol?When methanol (CH3OH) is dissolved in water, the term "aqueous methanol" is used (H2O). Due to the polarity of the molecules, methanol and water combine to form a homogeneous solution.
The concentration and mobility of the ions present in a solution determine its electrical conductivity. Although methanol (CH3OH) is a polar molecule, when it dissolves in water, it does not separate into ions. As a result of the lack of charged particles that can conduct an electric current, aqueous methanol has a low electrical conductivity.
The bigger molecule ethylene glycol (C2H6O2), in contrast, does dissociate into ions when it is dissolved in water, resulting in two charged particles for each molecule. As a result, aqueous ethylene glycol conducts electricity better than aqueous methanol.
As a result of the different numbers of ions created when methanol and ethylene glycol are dissolved in water, their conductivity values are different.
To know more about aqueous methanol, visit
brainly.com/question/30137922
#SPJ1
how do particles of a liquid become particles of a gas? what is this called? how does it differ from evaporation?
The process of particles of a liquid becoming particles of a gas is called vaporization or boiling, which occurs when the kinetic energy of the particles overcomes the intermolecular forces holding the liquid together.
This differs from evaporation, which only occurs at the surface of a liquid and can occur at any temperature.
Evaporation is a physical process in which a liquid substance is transformed into its gaseous state, by the absorption of energy in the form of heat. In this process, the molecules at the surface of the liquid gain sufficient energy to overcome the intermolecular forces that hold them together, and escape into the surrounding space as a gas.
Evaporation plays an important role in many fields of chemistry, such as in the separation and purification of substances. It is commonly used in the process of distillation, where a mixture of two or more liquids is heated and the components with different boiling points evaporate and are condensed separately. The rate of evaporation is affected by several factors, including temperature, surface area, humidity, and the nature of the liquid.
To learn more about Evaporation visit here:
brainly.com/question/5019199
#SPJ4
a mixture of helium and hydrogen gases contains helium at a partial pressure of 428 mm hg and hydrogen at a partial pressure of 193 mm hg. what is the mole fraction of each gas in the mixture?
6.88 moles of helium and 3.12 moles of hydrogen are present in every 10 moles of gas in the combination.
The total pressure of the gas mixture can be found by adding the partial pressures of each gas:
Total pressure = partial pressure of helium + partial pressure of hydrogen
Total pressure = 428 mmHg + 193 mmHg
Total pressure = 621 mmHg
To find the mole fraction of each gas, we need to use the following formula:
Mole fraction = moles of gas / total moles of gas
We can find the moles of each gas using the ideal gas law:
PV = nRT
where P is pressure, V is volume, n is the number of moles, R is the gas constant, and T is temperature.
We can assume that the volume, temperature, and gas constant are constant, so we can simplify the equation to:
n = PV / RT
For helium:
n(He) = (428 mmHg)(V) / (R)(T)
For hydrogen:
n(H₂) = (193 mmHg)(V) / (R)(T)
The total number of moles of gas in the mixture is the sum of the moles of helium and hydrogen:
n(total) = n(He) + n(H₂)
To find the mole fraction of each gas, we can substitute the expressions for n(He), n(H₂), and n(total) into the formula:
Mole fraction of helium = n(He) / n(total)
Mole fraction of hydrogen = n(H₂) / n(total)
After simplifying and substituting the expressions, we get:
Mole fraction of helium = 0.688
Mole fraction of hydrogen = 0.312
Therefore, the mole fraction of helium in the mixture is 0.688 and the mole fraction of hydrogen is 0.312. This indicates that for every 10 moles of gas in the combination, 6.88 moles are helium and 3.12 moles are hydrogen.
To know more about the Mole fraction, here
https://brainly.com/question/29808190
#SPJ4
what is the concentration of hcl after diluting 10 ml of concentrated hcl solution (25% with a density of 1.07 g/ml) into a 250 ml volumetric flask? e) what is the concentration of nh3 after diluting 15 ml of concentrated nh3 (15% with a density of 0.75 g/ml) into a 100 ml volumetric flask?
HCl after dilution: Final concentration = 0.107 g/ml, NH₃ after dilution: Final concentration = 0.016875 g/ml
To calculate the concentration of HCl after dilution:
Step 1: Find the mass of HCl in the 10 ml concentrated solution.
Mass = Volume × Density × Concentration
Mass = 10 ml × 1.07 g/ml × 0.25
Mass = 26.75 g
Step 2: Calculate the final volume after dilution, which is the volume of the volumetric flask.
Final volume = 250 ml
Step 3: Calculate the final concentration of HCl.
Final concentration = Mass / Final volume
Final concentration = 26.75 g / 250 ml
Final concentration = 0.107 g/ml (or 10.7% by mass)
To calculate the concentration of NH₃ after dilution:
Step 1: Find the mass of NH3 in the 15 ml concentrated solution.
Mass = Volume × Density × Concentration
Mass = 15 ml × 0.75 g/ml × 0.15
Mass = 1.6875 g
Step 2: Calculate the final volume after dilution, which is the volume of the volumetric flask.
Final volume = 100 ml
Step 3: Calculate the final concentration of NH₃.
Final concentration = Mass / Final volume
Final concentration = 1.6875 g / 100 ml
Final concentration = 0.016875 g/ml (or 1.6875% by mass)
For more such questions on HCl
brainly.com/question/24613812
#SPJ11
To determine the temperature water becomes ice, Passaic DPW employees
made a salt water solution. If you made a solution containing 0.50 mole of
rock salt in 300 g of water. What is the new freezing point of the solution?
the new freezing point of the solution is 0°C - 6.19°C = -6.19°C.
Assuming complete dissociation of the rock salt in water, the number of particles in the solution is 0.50 moles of rock salt x 2 particles per formula unit (NaCl) = 1.0 mole of particles.
The molal concentration of the solution can be calculated as follows:
molality (m) = moles of solute / mass of solvent in kg
mass of solvent = 300 g = 0.3 kg
m = 1.0 moles / 0.3 kg = 3.33 m
The freezing point depression (ΔTf) of the solution can be calculated using the formula:
ΔTf = Kf x m
where Kf is the freezing point depression constant of water, which is 1.86 °C/m.
ΔTf = 1.86 °C/m x 3.33 m = 6.19 °C
Therefore, the new freezing point of the solution is 0°C - 6.19°C = -6.19°C.
learn more about temperature related question here:
https://brainly.com/question/28648062
#SPJ9
dye stock solution concentration, m blue 0.3523 yellow 0.1542 red 0.1017 a mixture is prepared by mixing 15.27 ml of the blue dye solution with 35.00 ml of the red dye solution and 14.73 ml of the yellow dye solution. what is the molar concentration of the blue dye in the mixture? [blue]mixture
Plug in the values and calculate the molar concentration of the blue dye in the mixture.
To find the molar concentration of the blue dye in the mixture, we need to use the formula:
[blue]mixture = (moles of blue dye) / (total volume of the mixture)
First, let's find the moles of blue dye
moles of blue dye = volume of blue dye × concentration of blue dye
moles of blue dye = 15.27 mL × 0.3523 M
Next, let's find the total volume of the mixture:
total volume = volume of blue + volume of red + volume of yellow
total volume = 15.27 mL + 35.00 mL + 14.73 mL
Now, we can find the molar concentration of the blue dye in the mixture:
[blue]mixture = (moles of blue dye) / (total volume of the mixture)
For more such questions on molar concentration
brainly.com/question/26255204
#SPJ11
what is the ph of a solution which is 0.1426 m in nh3 and 0.1291 m in nh4br common ion effect
The pH of a solution which is 0.1426 M in NH3 and 0.1291 M in NH4Br (common ion effect) is 9.42.
The pH of a solution with a given molarity can be determined by using the Henderson-Hasselbalch equation, which relates the pH of a buffer solution to its components' pKa and concentrations. The pH of a 0.1426 M solution of NH3 (weak base) and 0.1291 M NH4Br (salt of a weak base and a strong acid) can be calculated using this equation:
NH3(aq) + H2O(l) ⇌ NH4+(aq) + OH-(aq)NH4Br → NH4+ + Br-pH = pKa + log [base]/[acid]where pKa is the negative logarithm of the acid dissociation constant of NH4OH (or ammonium hydroxide), which is equal to 9.25. Because the equation refers to NH3, we need to find Kb (base dissociation constant) from the given pKa value.Kb = Kw/Ka= 1.0×10^-14/1.8×10^-5= 5.56×10^-10
At equilibrium, [NH3] = [NH4+] and [OH-] = xSo, Kb = [NH4+][OH-]/[NH3]Therefore, 5.56×10^-10= x^2/(0.1426-x)Because the concentration of NH4+ ions in NH4Br is negligible compared to the concentration of NH3, we can assume that x = [OH-]. Thus, 5.56×10^-10= x^2/0.1426, which yields [OH-] = 1.89×10^-6 M. As a result, pH = 14 - pOH = 14 + log [H+]= 14 + log (1.0×10^-14/1.89×10^-6)≈ 9.42Therefore, the pH of the solution is 9.42.
To know more about pH refer to-
brainly.com/question/15289714#
#SPJ11
shown below is a dipeptide. a. over which ph range will the dipeptide predominantly exist as a neutrally charged molecule? b. what is the isoelectric point of this peptide? show your calculations to support your answer.
a. The two functional groups in an amino acid are the amino group (-NH2) and the carboxylic acid group (-COOH). When two amino acids join together via a peptide bond, the resulting dipeptide has two functional groups, one amino group and one carboxylic acid group, that can be ionized depending on the pH of the solution.
The pH at which a dipeptide predominantly exists as a neutrally charged molecule is the average of the two pKa values of its constituent amino acids. In this case, one amino acid has a pKa of 2.34 for the carboxylic acid group and a pKa of 9.60 for the amino group, while the other amino acid has a pKa of 2.20 for the carboxylic acid group and a pKa of 9.13 for the amino group.
To determine the pH range over which the dipeptide predominantly exists as a neutrally charged molecule, we need to find the average of the two pKa values for each functional group.
For the carboxylic acid group:
(pKa1 + pKa2) / 2 = (2.34 + 2.20) / 2 = 2.27
For the amino group:
(pKa1 + pKa2) / 2 = (9.60 + 9.13) / 2 = 9.37
Therefore, the pH range over which the dipeptide predominantly exists as a neutrally charged molecule is around pH 2.27 to pH 9.37.
b. The isoelectric point (pI) of a peptide is the pH at which it has a net charge of zero. To calculate the pI of this dipeptide, we need to find the pH at which the positive and negative charges on the dipeptide are equal.
At a pH below the pKa of the carboxylic acid group, the carboxylic acid group is protonated and carries a positive charge, while the amino group is protonated and carries a positive charge. At a pH above the pKa of the amino group, the amino group is deprotonated and carries a negative charge, while the carboxylic acid group is deprotonated and carries a negative charge.
Therefore, the pI can be calculated by averaging the two pKa values of the amino acids, as well as their corresponding charges.
pI = (pKa1 + pKa2) / 2 = (2.34 + 2.20 + 9.60 + 9.13) / 4 = 5.32
The isoelectric point of this dipeptide is 5.32.
To know more about dipeptide reactions, visit the link given below:
https://brainly.com/question/6194023
#SPJ4
ammonia nh3 is generally considered a basic compound, but under very basic conditions it can act as an acid. what is the chemical formula for the conjugate base of nh3?
The conjugate acid of ammonia under the basic conditions is given as NH⁴⁺ (Ammonium).
Acid-base pairs that differ by one proton are called conjugated pairs. A conjugate acid-base pair is a pair of substances that can both absorb hydrogen ions and donate hydrogen ions to each other. A proton is added to a compound to create a conjugate acid, and a proton is removed to create a conjugate base. The conjugate acid of ammonia
NH3 is NH₃ + H⁺ → NH₄⁺, where NH3 is the conjugate base and NH4+ is the conjugate acid. NH3 is generally considered a basic chemical, but it can act as an acid under extremely alkaline conditions.
To know more about conjugate acid, visit,
https://brainly.com/question/12584785
#SPJ4
how does electronic polarizability or scaled-charge affect the interfacial properties of room temperature ionic liquids?
Electronic polarizability and scaled-charge are important parameters that can have a significant impact on the interfacial properties of RTILs, as well as their behavior in the presence of external electric fields.
Electronic polarizability is a measure of how easily the electron cloud in an atom or molecule can be distorted by an external electric field. In RTILs, electronic polarizability affects the strength of the electrostatic interactions between ions at the interface. This, in turn, affects the interfacial tension, which is a measure of the energy required to create new interfacial area between two immiscible phases.
Scaled-charge is a parameter that describes the effective charge of an ion in a RTIL. It takes into account the polarization of the ion's electron cloud in the presence of other ions in the RTIL. Scaled-charge affects the distribution of ions at the interface, as well as the surface charge density. This, in turn, affects the interfacial tension and the capacitance of the interface.
To know more about polarizability here
https://brainly.com/question/29765380
#SPJ4
consider the following balanced equation. if the concentration of sbcl3 is 0.825 m in 200.0 ml of solution after the reaction is complete, how many ml of 4.00 m hcl were added?v
To solve this problem, we can use the balanced equation and the concept of moles and molarity.
First, we need to find the moles of SbCl3. We can use the formula: moles = molarity * volume (in liters) moles of SbCl3 = 0.825 M * 0.2 L = 0.165 moles Next, let's write down the balanced equation: SbCl3 + 3HCl → SbCl5 + 3H2
According to the balanced equation, 1 mole of SbCl3 reacts with 3 moles of HCl. So, moles of HCl required = 0.165 moles of SbCl3 * 3 = 0.495 moles Now, we need to find the volume of 4.00 M HCl required.
Using the formula for moles: moles = molarity * volume (in liters) We can rearrange the formula to solve for the volume: volume (in liters) = moles / molarity volume of HCl (in liters) = 0.495 moles / 4.00 M = 0.12375 L Now, convert the volume to milliliters: volume of HCl (in mL) = 0.12375 L * 1000 mL/L = 123.75 mL So, 123.75 mL of 4.00 M HCl were added.
Therefore the answer is 123.75 mL of 4.00 M HCl were added.
For more questions on: moles
https://brainly.com/question/28037816
#SPJ11
the name given to an aqueous solution of hbr is . group of answer choices bromic acid hypobromous acid hydrogen bromide bromous acid hydrobromic acid
The name given to an aqueous solution of HBr is "hydrobromic acid." Option E is correct.
Hydrobromic acid (HBr) is a strong acid that forms when hydrogen bromide gas dissolves in water. It is a clear, colorless liquid having a pungent odor as well as it is highly corrosive. Hydrobromic acid is commonly used in the laboratory and in various industrial applications, including the production of pharmaceuticals, dyes, and other chemicals. It is also used as a reagent in organic chemistry for various types of reactions.
An aqueous solution is the solution in which water will be the solvent. In other words, it is a solution where water is the substance that dissolves other substances, which are called solutes. Many substances can dissolve in water to form aqueous solutions, including salts, acids, and bases.
Hence, E. is the correct option.
To know more about Hydrobromic acid here
https://brainly.com/question/15231576
#SPJ4
--The given question is incomplete, the complete question is
"The name given to an aqueous solution of HBr is . group of answer choices A) bromic acid B) hypobromous acid C) hydrogen bromide D) bromous acid E) hydrobromic acid."--
if the amount of radioactive carbon 14 in a wooden artifact is only one- eighth of a new piece of the same wood, how old is the artifact?
The artifact is approximately 17,190 years old. The half-life of carbon-14 is approximately 5730 years. This means that the amount of carbon-14 in a sample will decrease by half every 5730 years.
If the amount of radioactive carbon-14 in a wooden artifact is one-eighth of a new piece of the same wood, then the fraction of carbon-14 remaining after some number of half-lives (n) can be calculated as:
(1/2)^n = 1/8
Simplifying this equation:
2^n = 8
2^n = 2^3
n = 3
This means that the wooden artifact has gone through 3 half-lives of carbon-14. The age of the artifact can be calculated by multiplying the half-life by the number of half-lives:
Age = Half-life × Number of half-lives
Age = 5730 years × 3
Age = 17,190 years
Find out more about the radioactive carbon 14
brainly.com/question/14812944
#SPJ4
a solution of pyridinium bromide has a ph of 3.10. what is the concentration of the pyridinium cation at equilibrium, in units of molarity?
The concentration of the pyridinium cation at equilibrium is 3.96 x 10^-9 M.Assuming that pyridinium bromide is a weak acid, we can use the acid dissociation constant (Ka) to calculate the concentration of the pyridinium cation at equilibrium. The Ka for pyridinium bromide is 5.6 x 10^-6.
Using the expression for Ka, we have:
Ka = [H+][C5H5NH+] / [C5H5NHBr]
At equilibrium, [H+] = 10^-pH = 10^-3.10 = 7.94 x 10^-4 M
Substituting the values into the equation and solving for [C5H5NH+], we get:
[C5H5NH+] = Ka * [C5H5NHBr] / [H+] = 5.6 x 10^-6 * [C5H5NHBr] / 7.94 x 10^-4 = 3.96 x 10^-9 M
Find out more about pyridinium bromat ide
brainly.com/question/14727217
#SPJ4
why do you discard solutions containing hexane in the separatory funnel instead of the organic waste container?
Always discard solutions containing hexane in a designated organic waste container to ensure safety, environmental responsibility, and compliance with regulations.
When using a separatory funnel to separate an organic solvent like hexane from an aqueous solution, it's important to discard the hexane properly to ensure safety and environmental responsibility. You should discard solutions containing hexane in a designated organic waste container instead of the general waste container because:
1. Safety: Hexane is a volatile and flammable solvent. Disposing of it in a general waste container could create a fire hazard or cause harmful fumes to accumulate.
2. Environmental responsibility: Hexane is harmful to the environment if not disposed of correctly. Designated organic waste containers are meant for solvents like hexane, so they are properly treated and managed to minimize environmental impact.
3. Compliance with regulations: Laboratory regulations often require that different types of waste be disposed of separately to ensure proper handling and treatment. Discarding hexane in the appropriate organic the waste container ensures compliance with these regulations.
For more such questions on hexane
brainly.com/question/9630611
#SPJ11
What is the volume, measured in liters at STP, of 285 grams of the gas acetylene, C3H8?
Answer:
a
Explanation:
What is the volume, measured in liters at STP, of 285 grams of the gas acetylene, C3H8? which equals 67-4o92- witch then gives u a
which of the following reaction types best represent the following reaction?fe subscript 2 straight o subscript 3 space (s )plus 3 space co space (g )rightwards arrow 2 space fe space (s )plus 3 space co subscript 2 space (g )
The oxidation number of iron(Fe) decreases from +3 to 0. The oxidation number of C increases from +2 to +4. Hence Fe2O3 is reduced and CO is oxidized. Hence, it is a redox reaction.
One of the reactants in a redox reaction involving two reactants will be an oxidising agent, and the other reactant will be a reducing agent. By taking electrons, the oxidising agent reduces while aiding in the oxidation of other species. By contributing electrons and undergoing oxidation, the reducing agent aids in the reduction of other species.
The species that experience a rise in oxidation state is the reducing agent in a redox reaction, while the species that experience a reduction in oxidation state is the oxidising agent. In this reaction Carbon monoxide(CO) is the reducing agent and it has reduced ferric oxide Fe2O3 which acts as an oxidizing agent.
Learn more about Redox reaction, here:
https://brainly.com/question/21851295
#SPJ4
what is the solubility in moles/liter for copper(ii) oxalate at 25 oc given a ksp value of 2.9 x 10-8. write using scientific notation and use 1 or 2 decimal places (even though this is strictly incorrect!)
The solubility of copper(II) oxalate at 25°C is approximately 5.39 x 10^-5 moles/liter.
To determine the solubility of copper(II) oxalate (CuC2O4) in moles/liter, we can use the Ksp value.
The balanced dissociation equation for CuC2O4 is:
[tex]CuC2O4 (s) ⇌ Cu²⁺ (aq) + C2O4²⁻ (aq)[/tex]
Let 's' represent the solubility of CuC2O4 in moles/liter. At equilibrium, the concentrations of Cu²⁺ and C2O4²⁻ ions are both 's' moles/liter.
The Ksp expression for CuC2O4 is:
[tex]Ksp = [Cu²⁺] * [C2O4²⁻][/tex]
Given that Ksp is[tex]2.9 x 10^-8:[/tex]
[tex]2.9 x 10^-8 = (s) * (s)[/tex]
To find 's', we can solve the equation:
[tex]s² = 2.9 x 10^-8[/tex]
[tex]s = √(2.9 x 10^-8)[/tex]
[tex]s ≈ 5.39 x 10^-5 moles/liter[/tex]
to know more about solubility refer here:
https://brainly.com/question/28170449#
#SPJ11
which state of matter has the weakest intermolecular forces? select the correct answer below: gas liquid solid all states of matter have the same strength of intermolecular forces.
The state of matter that has the weakest intermolecular forces is the gas state. Option A is correct.
In the gas state, the molecules are relatively far apart from each other and are in constant motion. The intermolecular forces between gas molecules are weak because the molecules have a large separation distance, resulting in a low density and high compressibility. The kinetic energy of gas molecules is much greater than the strength of their intermolecular forces, and they tend to move independently of each other.
In contrast, in the liquid and solid states, the intermolecular forces are stronger due to the closer proximity of the molecules. In liquids, the molecules are in close contact with each other, allowing for the formation of temporary dipole-dipole forces and hydrogen bonding. In solids, the molecules are held together by even stronger forces, such as ionic, covalent, or metallic bonds. Option A is correct.
Which state of matter has the weakest intermolecular forces?
Select the correct answer below:
A. Gas
B. Liquid
C. Solid
D. All states of matter have the same strength of intermolecular forces.
To know more about the Forces, here
https://brainly.com/question/30644583
#SPJ4
1) How many moles of gas occupy 58 L at a pressure of 1.55 atmospheres and a temperature of 222 K?
To find the moles of the gas , we can use the ideal gas law. Which states -
[tex] \:\:\:\:\:\:\:\:\:\star\longrightarrow \sf \underline{PV=nRT} \\[/tex]
Where:-
P is the pressure measured in atmospheres V is the volume measured in litersn is the number of moles.R is the ideal gas constant (0.0821 L atm mol⁻¹ K⁻¹).T is the temperature measured in kelvin.As per question, we are given that-
P=1.55 atmV= 58 LT = 222 KR = 0.08206 L atm mol⁻¹ K⁻¹Now that we have all the required values, so we can put them all in the Ideal gas law formula and solve for moles -
[tex] \:\:\:\:\:\:\:\:\:\star\longrightarrow \sf \underline{PV=nRT} \\[/tex]
[tex] \:\:\:\:\:\:\:\:\:\longrightarrow \sf 1.55 \times 58 = n \times 0.0821 \times 222\\[/tex]
[tex] \:\:\:\:\:\:\:\:\:\longrightarrow \sf 89.9 = n \times 18.2262\\[/tex]
[tex] \:\:\:\:\:\:\:\:\:\longrightarrow \sf n \times 18.2262 =89.9\\[/tex]
[tex] \:\:\:\:\:\:\:\:\:\:\:\:\longrightarrow \sf n = \dfrac{89.9}{18.2262}\\[/tex]
[tex] \:\:\:\:\:\:\:\:\:\:\:\:\longrightarrow \sf n =4.9324......\\[/tex]
[tex]\:\:\:\:\:\: \:\:\:\:\:\:\longrightarrow \sf \underline{n =4.93 \:moles }\\[/tex]
Therefore, 4.93 moles of gas will be occupied 58 L at a pressure of 1.55 atmospheres and a temperature of 222K.
Answer:
4.93 moles
Explanation:
To find how many moles of gas pressure occupy 58 L at a pressure of 1.55 atmospheres and a temperature of 222 K, use the ideal gas law.
Ideal Gas Law[tex]\boxed{\sf PV=nRT}[/tex]
where:
P is the pressure measured in atmospheres (atm).V is the volume measured in liters (L).n is the number of moles.R is the ideal gas constant (0.08206 L atm mol⁻¹ K⁻¹).T is the temperature measured in kelvin (K).As we are solving for the number of moles, rearrange the equation to isolate n:
[tex]\implies \sf n=\dfrac{PV}{RT}[/tex]
Given values:
P = 1.55 atmV = 58 LR = 0.08206 L atm mol⁻¹ K⁻¹T = 222 KSubstitute the values into the formula and solve for n:
[tex]\implies \sf n=\dfrac{1.55 \cdot 58}{0.08206 \cdot 222}[/tex]
[tex]\implies \sf n=\dfrac{89.9}{18.21732}[/tex]
[tex]\implies \sf n=4.93\;mol\; (3\;s.f.)[/tex]
Therefore, 4.93 moles of gas occupy a volume of 58 L at a pressure of 1.55 atm and a temperature of 222 K.
pel is the permissible exposure limit (pel) of a vapor expressed in parts of vapor per million parts of contaminated air. group of answer choices true false
The given statement "PEL will be the permissible exposure limit of the vapor which is expressed in the parts of vapor per million parts of the contaminated air" will be true. Because, PEL is expressed as parts of the hazardous substance per million parts of air (ppm).
The Permissible Exposure Limit (PEL) is a term used in occupational health and safety to describe the maximum allowable concentration of a hazardous substance in the air that a worker may be exposed to over a specified time period, typically an eight-hour workday.
For example, if the PEL of a substance is 10 ppm, it means that a worker may be exposed to a maximum concentration of 10 parts of the substance per million parts of air during an eight-hour workday without experiencing adverse health effects.
To know more about Permissible Exposure Limit here
https://brainly.com/question/3807093
#SPJ4
Write your own paragraph to reflect over the current situation of coral reefs and how these events can affect ocean health.
(If you intend to use any information from a source which you consider is of importance or can enrich or support your ideas you can use references or use citations- remember plagiarism is not acceptable)
The "rainforests of the sea," or coral reefs, are under serious threat from human activity and climate change. Overfishing, pollution, acidification of the water, and rising sea temperatures are all factors in the decline of coral reefs.
Coral reefs are important for the health of our oceans because they provide vital habitats for numerous fish species and other marine life. By absorbing wave energy, they also offer coastal security, reducing erosion and storm damage.
In addition to endangering the survival of numerous marine species, the destruction of coral reefs has serious economic repercussions for the local populations that depend on them for tourism and fishing.
Coral reef degradation is also a result of overfishing and pollution, such as nutrient runoff from farmland and sewage. Coral reef destruction threatens not only the biodiversity of our oceans but also the economies of the local communities that depend on them for tourists and fishing.
As a result, we must take action to lower our carbon emissions, enhance marine conservation efforts, and deal with the underlying reasons for the decline of coral reefs.
learn more about coral reefs here
https://brainly.com/question/10970167
#SPJ1
7. a sample of 0.10 m c6 h5 cooh(aq) (benzoic acid) solution is titrated with 0.10 m naoh(aq) solution. what is the ph of the solution at the equivalence point? ka (c6 h5 cooh)
The pH of the solution at the equivalence point is 4.19.
To calculate the pH at the equivalence point of the titration, we need to use the Henderson-Hasselbalch equation:
[tex]pH=pKa+log(\frac{A^{-} }{HA} )[/tex]
At the equivalence point, the moles of C6H5COOH and NaOH will be equal, so the concentration of C6H5COOH will be halved, and the concentration of its conjugate base, C6H5COO-, will be equal to the concentration of NaOH added. Therefore, we can substitute [A-] with the concentration of NaOH.
0.10 M NaOH will be added to 0.05 M of C₆H₅COOH to reach the equivalence point. We can then use the Ka value to calculate the pKa:
pKa = -㏒(Ka) = -㏒(6.5 x 10⁻⁵)
= 4.19
Substituting the values into the Henderson-Hasselbalch equation:
pH = 4.19 + ㏒([NaOH]/[C₆H₅COOH])
At the equivalence point,
[NaOH] = 0.05 M and [C₆H₅COOH] = 0.05 M.
Substituting these values:
pH = 4.19 + log(1)
= 4.19
As a result, the solution's pH at the equivalence point is 4.19.
To know more about the Equivalence point, here
https://brainly.com/question/11004927
#SPJ4
which two statements below are true of the reaction above? choose the 2 correct statements. a in the forward reaction, nitrogen and hydrogen combine to form ammonia. b in the forward reaction, ammonia decomposes into nitrogen and hydrogen. c in the reverse reaction, nitrogen and hydrogen combine to form ammonia. d in the reverse reaction, ammonia decomposes into nitrogen and hydrogen.
The two correct statements are:
A) In the forward reaction, nitrogen and hydrogen combine to form ammonia.
C) In the reverse reaction, nitrogen and hydrogen combine to form ammonia.
The given reaction is the synthesis of ammonia, which is represented as:
N2 + 3H2 → 2NH3
In the forward reaction, nitrogen and hydrogen combine to form ammonia, as stated in option A.
In the reverse reaction, ammonia decomposes back into nitrogen and hydrogen, which is the opposite of the forward reaction. The reverse reaction is represented as:
2NH3 → N2 + 3H2
Option B is incorrect because it describes the reverse reaction instead of the forward reaction. Option D is incorrect because it describes the decomposition of ammonia instead of the synthesis of ammonia.
Find out more about ammonia
brainly.com/question/13927596
#SPJ4
Suppose this system is analyzed at a particular temperature, and the equilibrium concentrations are found to be [SiH4] = 0.018 M, [Cl2] = 0.0043 M, [SiCl4] = 2.2×10-4 M, and [H2] = 3.9×10-4 M. Calculate the value of K for this reaction. Also, what is the value of K for the reverse reaction at this temperature?
The value of K for the reverse reaction at the given temperature is 9.35.
The given reaction is:
SiH4(g) + 2Cl2(g) ⇌ SiCl4(g) + 2H2(g)
The equilibrium concentrations are given as follows:
[SiH4] = 0.018 M
[Cl2] = 0.0043 M
[SiCl4] = 2.2×[tex]10^{-4}[/tex]M
[H2] = 3.9×[tex]10^{-4}[/tex]M
The expression for the equilibrium constant (K) for the given reaction is:
K = ([SiCl4] x [H2]) / ([SiH4] x [Cl2])
Substituting the given values in the above equation, we get:
K = (2.2×[tex]10^{-4}[/tex]Mx (3.9×[tex]10^{-4}[/tex]M)^2) / (0.018 x (0.0043))
K = 0.107
Therefore, the value of K for this reaction at the given temperature is 0.107.
For the reverse reaction, we need to take the reciprocal of K to obtain the equilibrium constant for the reverse reaction. The reverse reaction can be obtained by reversing the direction of the given reaction, which gives:
SiCl4(g) + 2H2(g) ⇌ SiH4(g) + 2Cl2(g)
The equilibrium constant for the reverse reaction is given by:
K' = 1/K
Substituting the value of K in the above equation, we get:
K' = 1/0.107
K' = 9.35
Learn more about equilibrium constant here:
https://brainly.com/question/31321186
#SPJ1
What cellular process occurs in the uterus before differentiation?
In the uterus, the fertilised egg or zygote passes through a number of cellular processes. Cell division, in which the zygote divides multiple times to create a mass of cells known as a blastocyst, is one of the most crucial processes.
What is the embryo's first step of cellular differentiation?Identity of cells, tissues, organs, and organisms are determined by the division of cells during embryogenesis. A embryo is created after a sperm fertilises an egg. The embryonic differentiation process begins when the zygote undergoes cleavage, a division into numerous cells.
Cellular division starts at what point?When separate tissue layers first form during a process known as gastrulation in vertebrates, differentiation starts. The regulation of differentiation by genes is similar to that of most other developmental processes.
To know more about cellular processes visit:-
https://brainly.com/question/17772081
#SPJ9
How do I solve this?
As a result, the theoretical yield of Fe3O4 in moles is 1.426 x 105 molewhile the actual yield is 2.41 mole and the percent yield is 0.107%.
The reaction's chemically balanced equation is as follows:
4H₂ + Fe₃O₄ = 3Fe + 4H₂O
Fe₃O₄has a molar mass of 231.5326 g/mol7.
We need to know the mass of Fe₃O₄ created in order to calculate the real amount of Fe₃O₄ in moles. 559 g1 of Fe₃O₄ were produced.
We must first determine the quantity of Fe utilized in the reaction in order to compute the theoretical yield of magnitude Fe₃O₄ moles. 7.97 million g, or 7.97 x 106 g, of Fe are used1. Fe has a molar mass of 55.845 g/mol7. Hence, the amount of Fe utilized in the reaction was:
1.426 x 105 mole = (7.97 x 106 g) / (55.845 g/mole)
One mole of Fe creates one mole of Fe3O4 according to the chemical equation. As a result, 1.426 x 105 mole is the theoretical yield of magnitude Fe3O4 in moles.
In order to determine percent yield, we apply the formula:
(Actual yield / Theoretical yield) times 100% equals the percent yield.
Replacement of values
Yield is calculated as follows:
(559 g/(1.426 x 105 mole/231.5326 g/mol)) x 100% = **0.107%**6.
What common chemical formulas are there?
Listed below are some typical chemical formulas:
- H₂O, or water
- NaCl: Salt
Baking soda is NaHCO₃.
- NaClO for bleach
- Table sugar (sucrose): C12H22O11
- CO₂: Carbon dioxide
- NH₃ for ammonia
- H₂O₂, or hydrogen peroxide
To know more about chemical formulas visit:
brainly.com/question/29031056
#SPJ1
which of the following claims about a binary compound in which the bonding is ionic is most likely to be scientifically valid? responses both elements in the compound are metals. both elements in the compound are metals. the atomic masses of the elements in the compound are relatively small. the atomic masses of the elements in the compound are relatively small. there is equal sharing of electrons between the atoms of the elements in the compound. there is equal sharing of electrons between the atoms of the elements in the compound. the electronegativity difference between the elements in the compound is relatively large.
A binary compound in which the bonding is ionic is most likely to be scientifically valid when there the electronegativity difference between the elements in the compound is relatively large.
A binary compound is a type of chemical compound which consists of two distinct elements. An ionic binary compound is formed when there is a relatively difference in electronegativities of the two elements, so that they have the tendency to form respective cations and anions. More specifically binary compounds refer to expanded solids. examples of ionic binary compounds: KBr, NaCl, NaBr.
There are three types of Binary Compounds. They are: Binary acid compounds, Binary ionic compounds, Binary covalent/molecular compounds.
Thus, for a binary compound to form ionic bond, there must be an electronegativity difference between the elements.
To know more about binary compounds here
https://brainly.com/question/15162286
#SPJ4
what is the buffer component ratio, (ch3coo-)/(ch3cooh) of an acetate buffer that has a ph of 4.47. ka of ch3cooh is 1.8 x 10-5.
The buffer component ratio, (CH3COO-)/(CH3COOH), of an acetate buffer with a pH of 4.47 and a Ka of CH3COOH of 1.8 x 10^- is: 0.54
The buffer component ratio, (CH3COO-)/(CH3COOH), of an acetate buffer with a pH of 4.47 and a Ka of CH3COOH of 1.8 x 10^-5 can be calculated using the Henderson-Hasselbalch equation:
pH = pKa + log([CH3COO-]/[CH3COOH])
So, the buffer component ratio (CH3COO-)/(CH3COOH) of the acetate buffer is approximately 0.54.
To know more about "Henderson-Hasselbalch equation" refer here:
https://brainly.com/question/13423434#
#SPJ11
which interactions can contribute to the intrinsic binding energy during enzymatic catalysis?electrostatic interactionspermanent covalent bondingvan der waals interactionsnucleophilic attack by serinehydrogen bonding
Intrinsic binding energy during enzymatic catalysis is caused by a variety of interactions.
Here are the interactions that can contribute to the intrinsic binding energy during enzymatic catalysis:
Electrostatic interactions are caused by the attraction of opposite charges or the repulsion of like charges. Enzymatic catalysis can be influenced by these interactions.
Permanent covalent bonding is a type of bonding that involves the sharing of electrons between two atoms. The formation of a covalent bond can help in the catalytic process.
Van der Waals interactions are a type of intermolecular force that arises due to fluctuations in the electron density around an atom. These interactions can also contribute to the intrinsic binding energy during enzymatic catalysis.
Nucleophilic attack by serine is a reaction that is commonly used in enzymatic catalysis. The serine acts as a nucleophile and attacks the substrate molecule, which results in the formation of a covalent bond between the enzyme and the substrate molecule.
Hydrogen bonding is another type of interaction that can contribute to the intrinsic binding energy during enzymatic catalysis. Hydrogen bonds are formed between the enzyme and the substrate molecule, which can help to stabilize the transition state during the catalytic reaction.These are the interactions that can contribute to the intrinsic binding energy during enzymatic catalysis.
for more such question on Intrinsic binding
https://brainly.com/question/14773820
#SPJ11