what is the pressure in a 22.0- l cylinder filled with 41.1 g of oxygen gas at a temperature of 331 k ?

The balanced chemical equation is,

[tex]2 C_{2} H_{6}[/tex]  + [tex]7 O_{2}[/tex]  ---> 4[tex]CO_{2}[/tex] + 6[tex]H_{2} O[/tex]

Chemical equations are defined as the symbolic representations of chemical reactions in which the reactants and the products are expressed in terms of their respective chemical formulae. Through chemical reaction reactants are converted to products. Balanced chemical equation is the symbolic representation of a chemical reaction having the symbols and chemical formulas. A chemical equation involves  the reactant entities which are given on the left-hand side and have the product entities are given on the right-hand side with a plus sign between the entities in both the reactants and the products. There is an arrow that points towards the products to show the direction of the chemical reaction.

The Balanced chemical equations are defined as the chemical equation which have the same number and type of each atom on both sides of the equation. The coefficients in this equation must be the simplest whole number ratio. The mass as well as the changes are equal in the balanced chemical equation.

To learn more about Balanced chemical equation

https://brainly.com/question/11904811

#SPJ4

The correct question is,

Balance the following chemical equation.

[tex]C_{2} H_{6}[/tex] + [tex]O_{2}[/tex] ------> [tex]CO_{2}[/tex] + [tex]H_{2} O[/tex]

Answer:  The half-life of this radioactive substance is 52.38 minutes.

This is calculated by dividing the time period (210 minutes) by the natural log of the ratio of the initial amount of the substance (200 grams) to the remaining amount (31 grams).

Half-life is the amount of time it takes for a substance to decrease by half. In this case, it took 210 minutes for the sample to decrease from 200 grams to 31 grams, which is a decrease of 169 grams. This means that the half-life is 52.38 minutes, or 3,143.8 seconds.

Half-life is an important concept in physics, particularly in the study of radioactive substances. It is used to predict the decay of a substance over time, as well as the rate of decay of a substance. Knowing the half-life of a substance can help researchers determine how quickly a substance will reach a particular amount, as well as how quickly a substance will decay.

In this example, the scientist was able to determine that it took 52.38 minutes for the sample to decay by half. This allowed the scientist to determine the rate of decay and predict how much of the substance will remain after a given amount of time.

Overall, the half-life of this radioactive substance is 52.38 minutes. This is determined by dividing the time period (210 minutes) by the natural log of the ratio of the initial amount of the substance (200 grams) to the remaining amount (31 grams). Half-life is an important concept in physics that can be used to predict the rate of decay of a substance over time.

Learn more about radioactive substances here:

https://brainly.com/question/1160651#

#SPJ11

2.69 M of NH4Cl must be added to the solution to create a buffer with a final pH of 9.

A buffer solution is a solution that resists changes in pH when small quantities of an acid or base are added to it. A buffer solution is a solution that can resist changes in pH when acid or base is added to it.

The Henderson-Hasselbalch equation, which relates the pH of a buffer solution to the dissociation equilibrium constant of the weak acid, may be used to determine the pH of a buffer solution. Pka and pH can be used to derive the Henderson-Hasselbalch equation, which is as follows: pH = pKa + log([A-]/[HA]). Here, [A-] is the concentration of conjugate base, and [HA] is the concentration of weak acid. A buffer solution is created by combining a weak acid with its corresponding conjugate base, or a weak base with its corresponding conjugate acid.

When a buffer solution is formed from a weak acid and its conjugate base, it is referred to as an acidic buffer. A buffer solution made up of a weak base and its corresponding conjugate acid is known as a basic buffer. The final pH of a buffer solution is determined by the ratio of the weak acid or base to the conjugate base or acid, as determined by the Henderson-Hasselbalch equation.

pH can be calculated using the following equation: pH = pKa + log([A-]/[HA]). The NH3-NH4+ buffer is commonly used in laboratories. It is made up of ammonia (NH3) and ammonium (NH4+) in a specific ratio. NH3 is a weak base with a Kb value of 1.8 × 10−5, while NH4+ is its conjugate acid, and its Ka value is 5.6 × 10−10.In this problem, we must determine the concentration of NH4Cl required to create a buffer solution with a final pH of 9. Using the Henderson-Hasselbalch equation: pH = pKa + log([A-]/[HA]). Since the solution is 0.30 M in NH3, we know that the [A-] is 0.30 M. We must now figure out what the [HA] is to calculate the concentration of NH4Cl necessary. pH can be rearranged in the following manner: pH = pKa + log([A-]/[HA])pH - pKa = log([A-]/[HA])10^(pH - pKa) = [A-]/[HA]. We can find pKa using the Kb value of NH3: Kw = Ka × Kb = 1 × 10^-14 = 5.6 × 10^-10 × 1.8 × 10^-5Ka = 5.6 × 10^-10 / 1.8 × 10^-5 = 3.11 × 10^-6pKa = -log(Ka) = 5.51. Now, we can calculate [HA] using the following equation: [A-]/[HA] = 10^(pH - pKa) = 10^(9 - 5.51) = 0.0301. Thus, the ratio of [A-]/[HA] is 0.30/0.0301 = 9.97.

This implies that we must add NH4Cl to the solution in order to create an ammonium/ammonia buffer with a ratio of 9.97:1. To achieve this ratio, we must add NH4Cl in such a way that the [NH4+] is 9.97 times higher than the [NH3]. Assuming that the volume of the solution is 1 L, the [NH3] is 0.30 M, and the desired ratio is 9.97:1, we can compute the [NH4+] that will be necessary:[NH4+] = [NH3] × ratio = 0.30 M × 9.97 = 2.99 M. We can now calculate the amount of NH4Cl that must be added to the solution using the following equation:2.99 M - 0.30 M = 2.69 M. Therefore, 2.69 M of NH4Cl must be added to the solution to create a buffer with a final pH of 9.

To know more about buffer click here:

https://brainly.com/question/19093015

#SPJ11

The rate of formation of O2 in the decomposition of H2O2 is significantly higher than both the rate of formation of H2O and the rate of disappearance of H2O2.

This is because O2 is the end product of the decomposition, meaning that it is the most energetically favorable state for the reaction to reach.

This means that the reaction will occur faster and more readily in order to reach the end product.

In the reaction, H2O2 breaks down into H2O and O2 according to the equation:
H2O2 --> H2O + O2

The rate of formation of H2O is significantly slower than the rate of formation of O2 because it is the intermediate product in the reaction.

The reaction does not have to expend as much energy in order to reach H2O, so the reaction rate is much slower.

The rate of disappearance of H2O2 is even slower than the rate of formation of H2O.

This is because H2O2 is the starting material in the reaction and the reaction must expend energy in order to break the bonds in the molecule. As a result, the rate of disappearance of H2O2 is the slowest.

Overall, the rate of formation of O2 in the decomposition of H2O2 is significantly higher than the rate of formation of H2O and the rate of disappearance of H2O2.

This is due to the reaction expending the least amount of energy in order to reach the end product of O2.

to know more about rate of formation refer here:

https://brainly.com/question/27549044#

#SPJ11

Answer: The percentage of the (R)-limonene in the sample is 67.24%.

The percentage of the (R)-limonene in a sample of limonene with a specific rotation of -38 can be calculated using the following equation:

Percentage (R)-limonene = (Specific rotation of sample - Specific rotation of (S)-limonene) ÷ (Specific rotation of (S)-limonene) x 100%

In this case, the equation is:

Percentage (R)-limonene = (-38 - (-116)) ÷ (-116) x 100% = 67.24%

Therefore, the percentage of the (R)-limonene in the sample is 67.24%.

Learn more about enantiomer here:

https://brainly.com/question/30845514#

#SPJ11

Answer: Tetracycline is an antibiotic containing multiple functional groups, including an amine group, an alcohol group, a carboxylic acid group, and a ketone group.

Tetracycline is an antibiotic containing multiple functional groups. The functional groups present in this molecule are an amine group, an alcohol group, a carboxylic acid group, and a ketone group.

The amine group is composed of nitrogen and hydrogen atoms, and is often found in organic compounds. It is also known as an amino group.

The alcohol group is composed of an oxygen and hydrogen atom bonded to a hydrocarbon group, usually a single bond. It is also known as a hydroxyl group.

The carboxylic acid group is composed of a carbonyl and hydroxyl groups, and is often found in organic compounds. It is also known as an carboxyl group.

The ketone group is composed of two oxygen atoms and two carbon atoms, and is often found in organic compounds. It is also known as a keto group.

In conclusion, tetracycline is an antibiotic containing multiple functional groups, including an amine group, an alcohol group, a carboxylic acid group, and a ketone group.

Learn more about antibiotic here:

https://brainly.com/question/30012458#



#SPJ11

The pH of the solution, as the silver nitrate is added will decrease.

When a solution of 0.10 m silver nitrate, AgNO₃, is added to a solution of 0.10 m lithium hydroxide, LiOH, the pH of the solution will decrease as the silver nitrate is added. This is because the silver nitrate reacts with the lithium hydroxide to form the silver hydroxide, AgOH, according to the following equation:

AgNO₃ + LiOH → AgOH + LiNO₃.

Since the Ksp for silver hydroxide is 2.0 x 10⁻⁸, the silver hydroxide will precipitate out of the solution, consuming H⁺ ions and thus lowering the pH of the solution.

The silver hydroxide will start to precipitate out when the concentrations of the ions present in the solution exceed the Ksp value. At this point, the solution will become saturated and further addition of silver nitrate will not increase the amount of precipitation.

The pH of the solution can be calculated using the Henderson-Hasselbalch equation and is given by the following equation:

pH = pKa + log [base]/[acid], where pKa is the acid dissociation constant for the reaction.

Therefore, as the silver nitrate is added to the lithium hydroxide solution, the pH of the solution will decrease.

To know more about  pH, refer here:

https://brainly.com/question/2288405#

#SPJ11

The decay rate is -364.2 grams per minute, which means that Zn-71 is decaying at a rate of 364.2 grams per minute.

Half-life is a term used to describe the amount of time it takes for half of a radioactive material to decay.

The half-life of Zn-71 is 2.4 minutes, which means that after 2.4 minutes, half of the Zn-71 atoms will have decayed, and after another 2.4 minutes, half of the remaining atoms will have decayed, and so on.

The problem wants to know how quickly the Zn-71 is decaying after 6.8 minutes have passed. We need to figure out how much Zn-71 is left after 6.8 minutes have passed.

We can use the formula N(t) = N0(1/2)t/T

where N(t) is the amount of the radioactive material at time t, N0 is the initial amount of the radioactive material, t is the time elapsed, and T is the half-life of the radioactive material.

We can find out how much Zn-71 is left after 6.8 minutes. N(6.8) = 200(1/2)6.8/2.4N(6.8) = 200(1/2)2.83N(6.8) = 36.42 grams. This means that after 6.8 minutes, only 36.42 grams of Zn-71 is left.

Use the formula for radioactive decay rate: R = -dN/dt, where R is the decay rate, dN is the change in the amount of radioactive material, and dt is the change in time.

We can approximate this using a small time interval, such as 0.1 minute, and use the formula: R ≈ ΔN/Δt.R ≈ (N(6.9) - N(6.8))/0.1R ≈ (0 - 36.42)/0.1R ≈ -364.2

Zn-71 is decaying at a rate of 364.2 grams per minute.

to know more about decay rate refer here:

https://brainly.com/question/30068164#

#SPJ11

The statement "Cross interactions between components of a mixture are represented by the ideal mixture model." is False.

The ideal mixture model represents interactions between components of a mixture as zero. According to the ideal mixture model, the energy of a mixture of gases is determined entirely by the kinetic energy of the individual molecules in the mixture.

A binary solution is a mixture of two pure components. An ideal solution is one in which the behavior of each component is ideal, implying that the intermolecular forces between the different molecules are identical, as are the intermolecular forces between the like molecules. In this case, the interactions between the molecules in the solution would be identical to the interactions between the molecules in the pure liquids.

The model that represents cross interactions between components of a mixture is the non-ideal mixture model. Non-ideal mixtures are mixtures in which the intermolecular forces between the components vary from one component to the next.

Learn more about ideal mixture model at https://brainly.com/question/31005241

#SPJ11

The number of alkenes formed depends on the position of the bromine and the methyl group on the carbon chain.

An alkene is described as a hydrocarbon containing a carbon–carbon double bond and often used as synonym of olefin, that is, any hydrocarbon containing one or more double bonds.

When 3-bromo-3-methylheptane is treated with a strong base, an elimination reaction occurs, resulting in the formation of alkenes.

The elimination reaction happens by removing a proton from a beta-carbon (i.e., a carbon adjacent to the carbon bearing the bromine atom) and the bromine atom to form an alkene.

Learn more about alkenes at: https://brainly.com/question/24270289

#SPJ1

Answer:This chemical reaction is a double replacement reaction.

Explanation:

Answer:

A-Double replacement

Explanation:

Hope this helps

Observing the formation of a silver mirror on the surface of a test tube when using Tollens' reagent indicates the presence of a reducing sugar.

Tollens' reagent is an aqueous solution of silver nitrate, sodium hydroxide, and ammonia used to test for the presence of aldehydes. The test is known as the Tollens' test, and it is based on the fact that aldehydes can be oxidized to carboxylic acids by silver ions.

In the presence of Tollens' reagent, the silver ions are reduced to metallic silver, which forms a silver mirror on the surface of the test tube when they are exposed to a reducing sugar.

Observing the formation of a silver mirror on the surface of a test tube when using Tollens' reagent indicates the presence of reducing sugar.

Reducing sugars are monosaccharides and disaccharides that can donate electrons to other molecules, resulting in their reduction.

Tollens' reagent is an oxidizing agent, and reducing sugars are oxidized by it to carboxylic acids.

As a result, the silver ions in Tollens' reagent are reduced to metallic silver, which forms a silver mirror on the surface of the test tube.

To know more about Tollens' reagent, refer here:

https://brainly.com/question/14356309#

#SPJ11

After three half-lives, the concentration of the reactant will be 1/8 of its initial concentration. This means that the remaining concentration of the reactant after three half-lives will be 8 m.

A second order reaction is one that has a rate proportional to the product of the concentration of two reactants or the square of the concentration of one reactant. In this case, the rate of the reaction is given by the equation:

r = k[A]²

The half-life of a reaction is the amount of time it takes for the concentration of the reactant to decrease by half. The half-life of a second-order reaction is given by the equation:

t½ = 1 / (k[A]₀)

Where k is the rate constant, [A]₀ is the initial concentration of the reactant, and t½ is the half-life of the reaction. After one half-life, the concentration of the reactant will be [A] = [A]₀ / 2

After two half-lives, the concentration of the reactant will be [A] = [A]₀ / 4

After three half-lives, the concentration of the reactant will be [A] = [A]₀ / 8

Given that the initial concentration of the reactant is 64 M, the concentration of the reactant after three half-lives is:

[A] = [A]₀ / 8[A] = 64 / 8[A] = 8 M

Therefore, the concentration of the reactant that is left after three half-lives is 8 M.

For more such questions on half-life , Visit:

https://brainly.com/question/23191712

#SPJ11

When a solution of calcium chloride is added to (the unknown) sodium acetate, sodium chloride (NaCl) and calcium acetate (Ca(C₂H₃O₂)₂)  will be formed.

This is a precipitation reaction, and the product will be a solid.

Here is the balanced chemical equation for this reaction:

CaCl₂ + 2NaC₂H₃O₂ →  Ca(C₂H₃O₂)₂ ( calcium acetate) + 2NaCl (sodium chloride)

Calcium chloride and sodium acetate will react to produce calcium acetate and sodium chloride in the presence of water. CaCl₂ and NaC₂H₃O₂ are the formulas for calcium chloride and sodium acetate, respectively.

The formula for calcium acetate is Ca(C₂H₃O₂)₂, and the formula for sodium chloride is NaCl.

To know more about calcium chloride, refer here:

https://brainly.com/question/15296925#

#SPJ11

To calculate the mass of SO2 produced when 185 grams of oxygen reacts, we need to use the following equation: 2Cu2S + 3O2 ---> 2Cu2O + 2SO2.

Step 1: Calculate the molar mass of oxygen.
The molar mass of oxygen is 32.00 g/mol.

Step 2: Calculate the number of moles of oxygen.
To calculate the number of moles of oxygen, we need to divide the given mass of oxygen (185 g) by the molar mass of oxygen (32.00 g/mol).

Therefore, the number of moles of oxygen is 5.78 moles (185 g/32.00 g/mol = 5.78 moles).

Step 3: Calculate the molar ratio between oxygen and SO2.
The equation shows that for every 3 moles of oxygen, 2 moles of SO2 are produced. Therefore, the molar ratio between oxygen and SO2 is 3:2.

Step 4: Calculate the number of moles of SO2.
Since the number of moles of oxygen is 5.78 moles and the molar ratio between oxygen and SO2 is 3:2, the number of moles of SO2 is 3.85 moles (5.78 moles x 2/3).

Step 5: Calculate the molar mass of SO2.
The molar mass of SO2 is 64.07 g/mol.

Step 6: Calculate the mass of SO2 produced.
To calculate the mass of SO2 produced, we need to multiply the number of moles of SO2 (3.85 moles) by the molar mass of SO2 (64.07 g/mol).

Therefore, the mass of SO2 produced is 247.5 g (3.85 moles x 64.07 g/mol = 247.5 g).

To know more about mass click here:

https://brainly.com/question/19694949

#SPJ11

According to the given reaction, the number of moles of CuO that can be produced from 0.900 mole of Cu₂O and 0.800 mole of O₂ is 1.800 mol.

This can be calculated using the mole ratio of the reactants and products. The mole ratio is determined by the balanced chemical equation. In this case, the balanced equation is

2Cu₂O(s) + O₂(g) --> 4CuO(s).

Since the equation is balanced, there are equal numbers of atoms of each element on both sides. This means that the mole ratio of the reactants is equal to the mole ratio of the products, so 4 moles of CuO can be produced from 2 mol of Cu2O and 1 mol of O2.

The limiting reactant in the reaction will determine the maximum amount of CuO that can be produced.

To determine the limiting reactant, we need to calculate the amount of CuO that can be produced from each reactant.

Using the stoichiometry of the balanced equation, we can calculate the amount of CuO that can be produced from each reactant:

Cu₂O: 0.900 mol Cu₂O × (4 mol CuO / 2 mol Cu₂O) = 1.800 mol CuO

O₂: 0.800 mol O₂ × (4 mol CuO / 1 mol O₂) = 3.200 mol CuO

We can see that the amount of CuO that can be produced from Cu₂O is less than the amount that can be produced from O₂. This means that Cu₂O is the limiting reactant and the maximum amount of CuO that can be produced is 1.800 mol.

Therefore, 0.900 mol of Cu₂O reacted with 0.800 mole of O₂ can produce 1.800 mol of CuO.

Learn more about mole ratio here: https://brainly.com/question/19099163.

#SPJ11

The number of grams of NaCl to add to raise the boiling point is:

86.12g.

For more information on boiling temperature kindly visit to

https://brainly.com/question/29722100

#SPJ1

An oxide of rhenium crystallizes with rhenium atoms at each of the corners and oxygen atoms in the middle of each edge of the cell. The formula of the oxide is ReO2.

An oxide is a chemical compound of at least one oxygen atom and one other element. One of the most common oxides is carbon dioxide, which is made up of one carbon atom and two oxygen atoms. Oxides are found in many other minerals and rocks, as well as in the atmosphere and they may be divided into acidic oxides and basic oxides on the basis of their chemical behavior. Formula of the oxide the rhenium atoms are present at each of the corners, whereas the oxygen atoms are located in the middle of each edge of the cell, as a result, the oxide formula will be ReO2.

When the structure of the oxide is observed, it is observed that the oxide is made up of tetrahedra in which the oxygen atoms are positioned at the vertices and the rhenium atoms are positioned at the centre of each face. In this, the atoms are arranged in the form of a cubic unit cell, with the oxygen atoms situated at each corner and the rhenium atoms located at the center of each edge. As a result, the oxide formula will be ReO2.

Learn more about rhenium at:

https://brainly.com/question/2692749

#SPJ11

The objective of measuring the freezing point of a solution of your compound is: to determine its purity or concentration.

When a compound is dissolved in a solvent, the freezing point of the resulting solution is lower than that of the pure solvent. This is because the solute molecules lower the freezing point of the solvent by interfering with the formation of the crystal lattice. The extent of the depression of the freezing point depends on the concentration of the solute and its nature.

To measure the freezing point of a solution of your compound, the solution is cooled until it begins to solidify. The temperature at which this occurs is recorded as the freezing point of the solution. By comparing the freezing point of the solution with the freezing point of the pure solvent, the concentration or purity of the solute can be calculated using the freezing point depression equation:

ΔTf = Kf · m,

where ΔTf is the freezing point depression, Kf is the freezing point depression constant, and m is the molality of the solute in the solution.

The freezing point depression constant is a property of the solvent and is typically provided in reference tables. Once the molality of the solute is determined, the molar mass or weight percent of the solute can be calculated, allowing for the determination of the purity or concentration of the compound.

To know more about concentration refer here:

https://brainly.com/question/10725862#

#SPJ11

Answer: When the pressure decreases to 700 mm Hg, the volume of oxygen gas is 640 mL.

A sample of oxygen occupies 560 ml when the pressure is 800 mm Hg. At a constant temperature, the volume of the gas when the pressure decreases to 700 mm Hg can be calculated as follows:

PV = k, where P is pressure, V is volume, and k is a constant at a constant temperature.

Thus, we can write the following equation:

P1V1 = P2V2 where P1 is the initial pressure (800 mm Hg), V1 is the initial volume (560 mL), P2 is the final pressure (700 mm Hg), and V2 is the final volume (which we want to determine).

We can rearrange the equation to solve for V2:V2

= (P1V1) / P2V2

= (800 mm Hg × 560 mL) / 700 mm HgV2

= 640 mL

Therefore, when the pressure decreases to 700 mm Hg, the volume of oxygen gas is 640 mL.



Learn more about pressure here:

https://brainly.com/question/22075375#



#SPJ11

The volume (in liters) in which 9.87 moles of ozone, O₃ can occupy is 221.09 liters

From the question given above, the following data were obtained:

The volume of 9.87 moles of ozone, O₃ can be obtained as illustrated below:

From the ideal gas theory, we understood that:

1 mole of ozone, O₃ = 22.4 Liters

Therefore,

9.87 moles of ozone, O₃ = (9.87 moles × 22.4 Liters) / 1 mole

9.87 moles of ozone, O₃ = 221.09 liters

Thus, we can conclude that the volume is 221.09 liters

Learn more about volume:

https://brainly.com/question/225322

#SPJ1

The orchard will produce 8760 individual pieces of fruit each year.

What is break even ?

Break even refers to the point at which the total cost of producing a product or providing a service is equal to the total revenue generated from selling that product or service. At the break-even point, there is no profit or loss, and the business is said to be "breaking even."

In other words, the break-even point is the level of sales at which the business is earning enough revenue to cover all its costs, including fixed costs (e.g., rent, salaries) and variable costs (e.g., cost of goods sold, marketing expenses). Beyond this point, any additional sales or revenue will generate a profit for the business.

a. To calculate how much fruit the orchard will produce each year, we need to multiply the number of trees by the number of fruits each tree bears:

Total number of fruit = 120 trees × 73 fruit/tree

Total number of fruit = 8760

Therefore, the orchard will produce 8760 individual pieces of fruit each year.

b. To calculate the price at which you need to sell each piece of fruit to break even, we need to divide the total cost of upkeep and care by the total number of fruit produced, and then add this to the cost of producing each piece of fruit. This will give us the minimum price at which we need to sell each piece of fruit to cover our costs:

Cost per fruit = (Upkeep cost + Cost of producing each fruit) / Total number of fruit

Since the upkeep and care of the orchard costs $850 per year, and the orchard produces 8760 individual pieces of fruit each year, the cost of upkeep and care per fruit is:

Cost of upkeep and care per fruit = $850 / 8760

Cost of upkeep and care per fruit = $0.097

Therefore, the minimum price at which we need to sell each piece of fruit to cover our costs is:

Minimum price per fruit = Cost per fruit + Cost of upkeep and care per fruit

Minimum price per fruit = Cost of producing each fruit + $0.097

Without information about the cost of producing each piece of fruit, we cannot calculate the minimum price required to break even.

To know more about Trees visit :-

https://brainly.com/question/2189834

#SPJ1

.

The concentration of Ag+ ions in silver phosphate must be less than the concentration of Ag+ ions in silver oxalate.Therefore, we can conclude that silver oxalate has a greater concentration of Ag+ ions than silver phosphate.

Molar solubility is the maximum amount of a solute that can dissolve in a solvent to form a saturated solutions at a specific temperature and pressure.

To compare concentration of Ag+ ions in silver oxalate and silver phosphate,we calculate the molar solubility of each compound.

For silver oxalate, the solubility product constant (Ksp) is given as 5.40x10⁻¹².

The balanced equation for the dissociation of silver oxalate is:

Ag₂C₂O₄s) ⇌ 2 Ag+(aq) + C₂O₄₂-(aq)

The Ksp expression for silver oxalate is:

Ksp = [Ag+]² [C₂O₄₂₋]

Since the stoichiometric coefficient of Ag+ is 2, we can assume that the molar solubility of silver oxalate is equal to x mol/L. Then, the molar concentration of Ag+ ions is also x mol/L.

Using the Ksp expression for silver oxalate, we can solve for x:

Ksp = [Ag+]² [C₂O₄₂-]

5.40x10⁻¹² = (x)² (2x)

5.40x10⁻¹² = 2x³

x = (5.40x10⁻¹²/₂)¹/₃

x = 4.38x10⁻⁴ mol/L

Therefore, the molar solubility of silver oxalate is 4.38x10⁻⁴ mol/L, and the concentration of Ag+ ions is also 4.38x10⁻⁴ mol/L.

For silver phosphate, the Ksp is given as 8.89x10⁻¹⁷

The balanced equation for the dissociation of silver phosphate is:

Ag₃PO₄(s) ⇌ 3 Ag+(aq) + PO₄₃-(aq)

The Ksp expression for silver phosphate is:

Ksp = [Ag+]³ [PO₄₃-]

Using the Ksp expression for silver phosphate, we can solve for x:

Ksp = [Ag+]³[PO₄₃-]

8.89x10⁻¹⁷ = (3x)³[PO₄₃-]

8.89x10⁻¹⁷ = 27x³ [PO⁴³-]

[PO⁴³-] = 8.89x10⁻¹⁷/27x³

Since we don't know the value of x yet, we can't directly solve for [PO₄₃-]. However, we know that the molar solubility of silver phosphate must be less than the molar solubility of silver oxalate, since the Ksp value for silver phosphate is smaller.

To know more about solutions visit:

https://brainly.com/question/28170449

#SPJ1

In case 4, HNO3 is not listed first, but rather HNO2. HNO3 is the stronger acid because it has a higher Ka value, meaning that it is more likely to donate a proton to form the conjugate base.

The other three cases all list the stronger acid first, meaning that it is more likely to donate a proton.
To explain further, we must first understand what Ka is and what it represents. Ka is an equilibrium constant, and it measures the strength of an acid. It is equal to the ratio of the product of the concentrations of the ions and the reactant, and the reactant concentration. A higher Ka value indicates that the acid is more likely to donate a proton, making it a stronger acid.
In case 4, HNO3 has a higher Ka value than HNO2, making it the stronger acid. However, it is listed second in the list, rather than first. This is because the list is in descending order of acid strength, so HNO2 is listed first because it is the weaker acid.
In conclusion, in case 4, HNO3 is the stronger acid, but it is not listed first. This is because the list is in descending order of acid strength, so the weaker acid is listed first.

For  more such questions on conjugate base

https://brainly.com/question/22514615

#SPJ11

Benzoic acid is one of the fundamental classes of organic compounds, which contains a carboxylic acid functional group bonded to a phenyl ring. It is used in food preservation and serves as a chemical intermediate in the production of many chemicals.

An alternative method for preparing benzoic acid from benzene is the use of Grignard reagents. Grignard reagents react with carbon dioxide in the presence of an acid to produce carboxylic acids. Grignard reagents are typically prepared by reacting an organic halide with magnesium metal in an anhydrous ether solvent.

The ether solvent is essential to stabilize the Grignard reagent because it complexes with the magnesium cation. The equation for the formation of benzoic acid by the Grignard method is as follows:

PhMgBr + CO2 + H2O → PhCO2H + MgBr(OH)The Grignard reagent, phenyl magnesium bromide, is synthesized by reacting bromobenzene with magnesium in anhydrous ether solution.

The reaction proceeds as follows:PhBr + Mg → PhMgBrOnce the phenylmagnesium bromide has been prepared, carbon dioxide is bubbled through the solution, and the Grignard reagent reacts with the carbon dioxide to form benzoic acid. The reaction between carbon dioxide and the Grignard reagent is carried out at low temperatures to prevent side reactions, which is crucial to the success of the reaction.

Furthermore, water must be excluded from the reaction mixture because it will hydrolyze the Grignard reagent and prevent it from reacting with the carbon dioxide.

To know more about Benzoic acid refer here:

https://brainly.com/question/28326761#

#SPJ11

(1) The two half-cell reactions are:

Cd(s) -> Cd2+(aq) + 2e-

2Ag+(aq) + 2e- -> 2Ag(s)

(2) The net reaction is:

Cd(s) + 2Ag+(aq) -> Cd2+(aq) + 2Ag(s)

In the first half-cell reaction, solid cadmium (Cd) is oxidized to form cadmium ions (Cd2+) and two electrons (2e-). In the second half-cell reaction, silver ions (Ag+) are reduced to form solid silver (Ag) and two electrons (2e-).

To combine the two half-cell reactions and determine the net reaction, the electrons on both sides must be balanced. Since two electrons are produced in the first reaction and two are consumed in the second reaction, they cancel out. Thus, the net reaction involves the solid cadmium reacting with silver ions to form cadmium ions and solid silver.

For more similar questions on electrochemistry,

brainly.com/question/17599723

#SPJ11

The final pressure of nitrogen gas, at a fixed temperature and number of moles, with a final volume of 214 ml is 552 torr.

The pressure and volume of an ideal gas are inversely proportional to each other, meaning if one increases, the other decreases. This can be expressed by the equation PV=nRT, where n is the number of moles, R is the ideal gas constant, and T is the temperature in Kelvin.

Since n and T remain constant, the equation can be rearranged to solve for pressure as P=nRT/V. Using the given values, P= (1)(0.08206)(273.15)/(214 ml) = 552 torr.

Thus, the final pressure of nitrogen gas at a fixed temperature and number of moles, with a final volume of 214 ml is 552 torr.

To know more about final pressure click on below link:

https://brainly.com/question/28526047#

#SPJ11

The molality of acetonitrile in water is 9.84 mol/kg.

Molality is an expression of the amount of solute dissolved in a solvent, which is measured in moles per kilogram. Molality is calculated by dividing the moles of the solute by the mass of the solvent, in kilograms.

In this case, the moles of the solute (acetonitrile) can be calculated by multiplying the volume (130.0 mL) with the density (0.7766 g/mL) and dividing it by its molar mass (41.05 g/mol).

moles of acetonitrile = (130.0 mL)(0.7766 g/mL) / (41.05 g/mol) = 2.459 mol

The mass of the solvent (water) can be calculated by multiplying its volume (250.0 mL) with its density (1.000 g/mL).

mass of water = (250.0 mL) (1.000 g/mL) = 250 g

Thus, the molality of acetonitrile in water is:

molality = (2.459 mol) / (250 g)(1 kg/1000 g) = 9.84 mol/kg.

Learn more about molality here: https://brainly.com/question/24065939.

#SPJ11

When we dilute an acidic solution, the pH increases because the concentration of H+ ions decreases. In this case, the pH increased from 4.00 to 6.00, which means that the solution became less acidic and closer to neutral. The pH of the resulting solution is 6.00.

pH is a measure of the concentration of hydrogen ions (H+) in a solution, which determines whether it is acidic, neutral, or basic. When the concentration of H+ ions is high, the solution is acidic, while when the concentration of OH- ions is high, the solution is basic. The pH of a solution is calculated as the negative logarithm of the concentration of H+ ions, and the formula is pH = -log[H+].

An acidic solution has a pH of 4.00. This means that the concentration of H+ ions is 10^-4.00 M, which is 0.0001 M. If you dilute 10.0 mL of this solution to a final volume of 1000.0 mL, you can calculate the new concentration of H+ ions by using the equation: C1V1 = C2V2, where C1 is the initial concentration, V1 is the initial volume, C2 is the final concentration, and V2 is the final volume. C1V1 = C2V210^-4.00 M x 10.0 mL = C2 x 1000.0 MLC2 = (10^-4.00 M x 10.0 mL)/1000.0 MLC2 = 10^-6.00 M = 0.000001 M

Now, we can calculate the pH of the resulting solution by using the formula: pH = -log[H+].pH = -log[0.000001].pH = 6.00

Know more about pH here:

https://brainly.com/question/491373

#SPJ11

Yes, a solid Cu(OH)2 will form when 0.075 g KOH is dissolved in 1.0 L of 1.0 x 10^-3 M Cu(NO3)2.  0.107 g of solid Cu(OH)2 will form.

First, we need to determine the amount of Cu2+ ions present in the solution:
1.0 x 10^-3 M Cu(NO3)2 means that there are 1.0 x 10^-3 moles of Cu2+ ions per liter of solution.
Next, we can use stoichiometry to determine the amount of OH- ions that will react with the Cu2+ ions to form Cu(OH)2. The balanced chemical equation for this reaction is:
Cu2+ (aq) + 2OH- (aq) → Cu(OH)2 (s)
For every 1 mole of Cu2+ ions, we need 2 moles of OH- ions. Therefore, the total amount of OH- ions needed to react with all of the Cu2+ ions in the solution is:
2 x 1.0 x 10^-3 mol = 2.0 x 10^-3 mol
Now we can use the Ksp of Cu(OH)2 to calculate the concentration of Cu2+ and OH- ions in the solution. The Ksp expression for Cu(OH)2 is:
Ksp = [Cu2+][OH-]^2
Since we know the Ksp value for Cu(OH)2, we can solve for either [Cu2+] or [OH-]. Let's solve for [OH-]:
Ksp = [Cu2+][OH-]^2
4.8 x 10^-20 = (1.0 x 10^-3 M)[OH-]^2
[OH-]^2 = 4.8 x 10^-17
[OH-] = 2.2 x 10^-9 M
Therefore, the concentration of OH- ions in the solution is 2.2 x 10^-9 M. Since we need 2 moles of OH- ions for every mole of Cu2+ ions, we know that the concentration of Cu2+ ions is half of the concentration of OH- ions:
[Cu2+] = 1.1 x 10^-9 M
Finally, we can use the molar mass of Cu(OH)2 to determine the mass of solid that will form:
Molar mass of Cu(OH)2 = 97.56 g/mol
1 mole of Cu(OH)2 is formed for every mole of Cu2+ ions, so the mass of Cu(OH)2 that will form is:
0.0011 mol x 97.56 g/mol = 0.107 g
Therefore, 0.107 g of solid Cu(OH)2 will form when 0.075 g KOH is dissolved in 1.0 L of 1.0 x 10^-3 M Cu(NO3)2.

For more such questions on solid , Visit:

https://brainly.com/question/28631710

#SPJ11