I was able to install and use the hashing tools from Maresware. The experience was quite straightforward. The user interface is intuitive, and the tools are easy to use.
What is intuitive?Intuitive is an adjective that describes something that is easily understood or appreciated without the need for conscious reasoning. It is often used to describe an innate knowledge or understanding of something which cannot be explained logically.
The tools allow you to generate, compare, and verify hash values for files, folders, and networks for free. Additionally, you can use the tools to generate and verify checksums for both MD5 and SHA1 hashing algorithms. Overall, it was a pleasant experience using Maresware's hashing tools.
To learn more about intuitive
https://brainly.com/question/29816987
#SPJ1
Which of the following NAC agent types creates a temporary connection?
Agentless
Dissolvable
Permanent
Zero-trust
The NAC agent type that creates a temporary connection is Dissolvable.
Network Access Control (NAC) is a security technology that is utilized to enforce the security compliance policy on all devices seeking access to a network. It does this by restricting the access of any unauthorized devices. To achieve this, the Network Access Control (NAC) system uses several tools, including agents.
There are two types of NAC agents, which include: Permanent agents - these agents are installed on endpoints by the IT administrator or system manager. These agents are used to monitor the device and ensure that they comply with security policies as defined by the network administrator.
Dissolvable agents - These agents create a temporary connection to the network and are often used when there is no permanent agent installed on the endpoint. Dissolvable agents are used to enforce security policies on noncompliant devices.Thus, we can say that the NAC agent type that creates a temporary connection is Dissolvable.
To know more about NAC Agent type : https://brainly.com/question/14328111
#SPJ11
under certain conditions, you may hear a whine from the power supply when you first power up the system. however, if you hear a whine coming from the video card, how can you fix it?
If you hear a whine coming from the video card, it is likely due to coil whine, which is caused by the electromagnetic coils on the video card vibrating at a high frequency.
How can you fix the issue that occurs on the video card?To fix this issue, you can try adjusting the power settings in the BIOS or software of the video card to reduce the power draw, which may alleviate the strain on the coils and reduce the noise.
Alternatively, you can try using a power supply with a higher wattage rating, which can provide more stable power to the video card and reduce the chances of coil whine occurring.
Read more about video cards here:
https://brainly.com/question/30187303
#SPJ1
a 1-m relationship is a connection between two tables in which rows of each table can be related to many rows of the other table. group of answer choices true false
The statement "a 1-m relationship is a connection between two tables in which rows of each table can be related to many rows of the other table" is True.
What is a Relationship between two tables?
A relationship between two tables establishes links between them so that users can quickly retrieve data from one table using the other table's data. A 1:m relationship is a link between two tables that allows many rows from one table to be related to one row from another table. There is no reason why rows from each table can't relate to many rows of the other table in a 1:m relationship.
In a 1:m relationship, one row in the first table is associated with several rows in the second table. A relationship is a critical aspect of database management systems, particularly if data is kept in a relational database management system. It establishes connections between tables, which enables users to access data from one table using data from another table. Without relationships between tables, data in a database would be difficult to access and manage.
Hence, it is always important to establish a relationship between two tables.
Learn more about Relationship between two tables here:
https://brainly.com/question/29671817
#SPJ11
what destination mac address would be included in a frame sent from a source device to a destination device on the same local network?
When a device sends a frame to another device on the same local network (also known as a broadcast domain), the destination MAC address included in the frame will be the MAC address of the receiving device.
To determine the MAC address of the receiving device, the sending device will first perform an ARP (Address Resolution Protocol) request to find the MAC address associated with the IP address of the destination device. Once the MAC address is known, the sending device will use that MAC address as the destination address in the Ethernet frame. It's worth noting that if the sending device doesn't know the MAC address of the destination device, it will send an ARP request to the local network asking for the MAC address associated with the destination IP address.
Learn more about MAC address: https://brainly.com/question/29807945
#SPJ11
how can solver be used in excel? what are the specific steps to fill info needed and run solver to generate reports and outputs?
To use Solver in Excel, we must enable Solver Add-ins in Microsoft Excel.
What is Excel Solver?Solver is an optimization tool that can be used to analyze a spreadsheet and identify the ideal solution. It works by adjusting variables in a spreadsheet to achieve a target value. Solver does this by using trial and error to test various values for variables until it identifies the optimum solution.
The Solver tool is an Excel add-in, which means you must activate it before using it. To enable Solver, follow these steps:
Click on the 'File' menu, and then choose 'Options.'Choose the 'Add-ins' option.In the 'Manage' box, select 'Excel Add-ins,' and then press 'Go'.'Select' the 'Solver Add-in' checkbox, and then click on 'OK'. Fill the necessary information into SolverTo use Solver, you must first input the problem into a spreadsheet.
Start by entering the parameters of the problem you're trying to solve. You'll need to specify the objective function, decision variables, and constraints.In Solver, the objective function is what you're trying to optimize. For instance, you might want to maximize your profits or minimize your costs. The decision variables are the values that you can adjust to achieve your objective function.The constraints are the restrictions that must be followed while trying to reach the objective function.The Solver will adjust the decision variables until it satisfies all of the constraints and optimizes the objective function.When you've entered all of the information into Solver, click on 'OK' to run it. Excel will automatically update the worksheet with the new values that Solver generates. You may then generate reports and outputs based on the results of the Solver output.Learn more about Solver here:
brainly.com/question/29843128
#SPJ11
you have just installed a packet-filtering firewall on your network. which options are you able to set on your firewall? (select all that apply.) answer source address of a packet sequence number acknowledgement number port number digital signature checksum destination address of a packet
The Source address of a packet and the Destination address of a packet are settings that can be made on a firewall. Be aware that based on the firewall in question, other choices may be available.
Which settings are available on a firewall?Broadly speaking, most firewalls enable you to create rules that specify which traffic is permitted to enter or leave your network. As an illustration, you may set up the firewall to only let traffic from particular IP addresses, to block specific ports, and to limit access to particular services.
A packet filtering firewall is what kind of firewall?A network security method that controls data flow to and from a network is a packet filtering firewall.
To know more about firewall visit:-
https://brainly.com/question/13098598
#SPJ1
_________ is a simple but incomplete version of a method.A. A stubB. A main methodC. A non-main methodD. A method developed using top-down approach
A stub is a simple but incomplete version of a method. A: "stub" is the correct answer.
A stub is a small piece of code that substitutes for an object and returns specified values. Stubs can be used in software development to simulate the behavior of future software components, thus allowing one component's development to proceed while the other's progress is still in the works.
A stub is a piece of code that mimics a real component but provides predetermined responses. It's a fake application for an absent component that allows the testing of a feature that depends on that component. The stub helps to isolate the dependent software module for more effective testing by controlling its input and output parameters. When writing software code, a stub is often used to generate test data.
Option A: stub is corrcet choice.
You can learn more about stub at
https://brainly.com/question/30451439
#SPJ11
information technology managers are often in a bind when a new exploit (or software vulnerability) is discovered in the wild. they can respond by updating the affected software or hardware with new code provided by the manufacturer, which runs the risk that a flaw in the update will break the system. or they can wait until the new code has been extensively tested, but that runs the risk that they will be compromised by the exploit during the testing period. dealing with these issues is referred to as
The term that refers to the process of dealing with issues that arise when a new software vulnerability is discovered in the wild is known as Risk Management.
Information technology managers are often in a quandary when a new exploit or software vulnerability is discovered in the wild. They can choose to update the affected software or hardware with the new code provided by the manufacturer, which carries the risk that a flaw in the update will break the system. Alternatively, they can wait until the new code has been extensively tested, but that runs the risk that they will be compromised by the exploit during the testing period.
Risk management refers to the process of identifying, analyzing, and mitigating risks that might adversely affect an organization's ability to achieve its goals. It also entails risk evaluation and prioritization of risks to control or eliminate them. It is necessary to have risk management procedures in place in the event of an unexpected exploit or software vulnerability.
The aim of risk management is to guarantee that the organization is aware of, understands, and handles the hazards it encounters to achieve its objectives.
You can learn more about Risk Management at: brainly.com/question/4680937
#SPJ11
true or false? a security awareness program should address the requirements and expectations of an organization's security policy.
True. A security awareness program should address the requirements and expectations of an organization's security policy.
What is a security awareness program?A security awareness program is a series of activities intended to raise awareness among staff, faculty, and students about information security, the value of information, the risks associated with it, and the practices for safeguarding it.A security awareness program should cover the following:
Security measures to protect sensitive information types of sensitive information and how to safeguard it.What to do if a security incident occurs Organizations' information security policies and procedures.
Why is a security awareness program important?A security awareness program is important for a variety of reasons, including:
To avoid data breaches or cyber-attacks. To guarantee that employees comprehend the significance of security and are accountable for their security practices.To help in the prevention of security incidents.To promote good security practices. To ensure compliance with applicable regulations and standards.In summary, a security awareness program should address the requirements and expectations of an organization's security policy.
To know more about security awareness program: https://brainly.com/question/23991359
#SPJ11
Which of the following is an input device ?A. KeyboardB. MouseC. PrinterD. Speaker
Both A. Keyboard and B. Mouse are input devices.
Keyboard and Mouse are input devices as they allow users to input data into the computer. The keyboard allows users to input text, numbers, and symbols, while the mouse allows users to input movement and commands. C. Printer and D. Speaker are output devices as they output information from the computer. The printer outputs text or graphics on paper or other materials, while the speaker outputs sound or audio.
Therefore, the correct option is A. Keyboard and B. Mouse are input devices.
You can learn more about input devices at
https://brainly.com/question/20938697
#SPJ11
write a pair of e20 instructions that will set the value of the memory cell identified by label isless to 1 when the value of $4 is less than 10 (decimal), and to 0 otherwise.
The pair of e20 instructions that will set the value of the memory cell identified by the label is less than 1 when the value of $4 is less than 10 (decimal), and to 0 otherwise, are: LOAD $4 LOADA #10 JC LT STORE #1 is less LOAD #0 is less LT: STORE #1 is less.
Here the instruction given is to set the value of the memory cell identified by the label is less to 1 when the value of $4 is less than 10 and to 0 otherwise.
This can be done by using the LOAD and JC instructions.
LOAD instruction is used to load the value in register A from the memory cell identified by $4.
JC instruction is used to jump to the instruction LT when the value in register A is less than 10.
STORE instruction is used to store the value of 1 or 0 in the memory cell identified by the label is less based on the condition LT is true or false respectively.
To know more about memory cell: https://brainly.com/question/6019034
#SPJ11
Which of the following is the best for generating random integer 0 or 1?A. (int)Math.random()B. (int)Math.random() + 1C. (int)(Math.random() + 0.5)D. (int)(Math.random() + 0.2)E. (int)(Math.random() + 0.8)
The best option for generating a random integer 0 or 1 is (A) " (int)Math.random() ". Option A is the correct answer.
The method Math.random() returns a double between 0.0 and 1.0 (inclusive of 0.0, but not 1.0), and casting it to an integer will truncate the decimal portion, resulting in either 0 or 1. Option B would generate either 1 or 2, while options C, D, and E would have a higher probability of generating one of the values over the other, making them less random.
Therefore, in conclusion it is stated that option A: "" is the correct naswer.
You can learn more about random integer at
https://brainly.com/question/251701
#SPJ11
All Java applications must have a method __________.A. public static Main(String[] args)B. public static Main(String args[])C. public static void main(String[] args)D. public void main(String[] args)E. public static main(String[] args)
All Java applications must have a method C: "public static void main(String[] args)".
This is the method where the execution of a Java program begins. It must be declared as public, static, void, and named "main" with a single parameter of type String array. The parameter "args" can be used to pass command-line arguments to the program if needed.
Options A, B, D, and E are not valid main method signatures and will result in a compilation error.
Therefore, the correct option is C.
You can learn more about Java Method at
https://brainly.com/question/29603082
#SPJ11
if sporting kc uses artificial intelligence to analyze the content of tweets sent by the mls team's fans, this would be an example of
This would be an example of natural language processing (NLP), which is a branch of artificial intelligence (AI) that enables computers to understand and interpret human language.
NLP is used to process the content of tweets sent by the MLS team's fans, extracting meaningful information from them in order to better understand how their audience thinks and what they need. This allows the team to improve their content and better engage with their fans.
NLP uses algorithms to analyze the content of tweets and identify certain topics, emotions, and keywords. It can then use this data to provide insights into the sentiment of the team's fans and how they feel about certain topics or issues. By utilizing NLP, Sporting KC can gain a better understanding of its fan base and what they need, allowing them to make better decisions when it comes to its content and engagement strategies.
You can learn more about natural language processing at: brainly.com/question/15200040
#SPJ11
which of the below is not an advantage of using a relational database? decreased data security increased flexibility increased data quality decreased data redundancy
Increased data redundancy is not an advantage of using a relational database. The correct answer C.
A relational database is a type of database management system that organizes data into one or more tables with a unique key identifying each row. There are several advantages to using a relational database, including increased data security, increased flexibility, and increased data quality.
Increased data security is achieved through access controls and data encryption, which can prevent unauthorized access and protect sensitive information.
Learn more about relational database:
https://brainly.com/question/13262352
#SPJ11
Design an algorithm that prompts the user to enter “yes” or “no” and validates the
input. (Use a case-insensitive comparison.)
In bash shell script code, please.
Answer:
#Prompt user for input
read -p "Please enter 'yes' or 'no': " userInput
#Make user input case insensitive
userInput=$(echo "$userInput" | tr '[:upper:]' '[:lower:]')
#Check if userInput is equal to 'yes' or 'no'
if [[ "$userInput" == "yes" || "$userInput" == "no" ]]; then
echo "Input accepted."
else
echo "Input not accepted. Please enter 'yes' or 'no'."
fi
q uizlet what is the best practice as stated within the lecture and text for answering the questions: when is it appropriate to email a thank you note for an interview?
In most cases, it is considered a good practice to send a thank-you note or email to the interviewer(s) within 24-48 hours after the interview.
This demonstrates your appreciation for their time and interest in the position, and can also help you stand out from other candidates.
In your note/email, be sure to express your gratitude for the opportunity to interview, reiterate your interest in the position, and highlight any particular topics or aspects of the interview that you found especially interesting. Also, be sure to proofread your note/email carefully for spelling and grammar mistakes.
Learn more about interview:
https://brainly.com/question/8846894
#SPJ11
the right to is a feature of the gdpr that allows individuals to request that organizations delete their personal data. select one: a. be forgotten b. opt-in to data collection c. a safe harbor d. opt-out of data collection e. do not track
Option-A: The right to be forgotten is a feature of the GDPR that allows individuals to request that organizations delete their personal data.
This right is also known as the right to erasure. Individuals have the right to request that organizations delete their personal data under certain circumstances, such as when the data is no longer necessary for the purposes for which it was collected, when the individual withdraws their consent, or when the data was unlawfully processed.
The right to be forgotten is an essential component of the GDPR because it gives individuals greater control over their personal data. It allows them to decide what information is collected about them and how it is used. This helps to protect their privacy and prevent their personal data from being misused or abused.
When an individual requests that their personal data be erased, the organization must comply with the request within a reasonable timeframe. They must also take reasonable steps to inform any third parties who have access to the data that the individual has requested that it be erased. Thus the correct answer is option-A.
For such more questions on GDPR :
brainly.com/question/28936485
#SPJ11
T/F: News360 is a search engine because it gathers, organizes, and then distributes web content.
The given statement "News360 is a search engine because it gathers, organizes, and then distributes web content." is false because News360 is not a search engine. It is a personalized news aggregator and content discovery platform.
News360 is not a search engine. While it gathers, organizes, and distributes web content, it does not primarily function to search for and index content across the web like a search engine such as Goo-gle or Bi-ng. Rather, News360 is an AI-powered news aggregator that uses machine learning algorithms to curate news articles from various sources based on a user's interests and reading history.
You can learn more about search engine at
https://brainly.com/question/512733
#SPJ11
question 2 a data analyst wants to be sure all of the numbers in a spreadsheet are numeric. what function should they use to convert text to numeric values?
The "value" function in a spreadsheet can be used to transform text into numeric values.
Describe the spreadsheet.A spreadsheet is a piece of software that can store, display, and edit data that has been organised into rows and columns. The spreadsheet is one of the most used tools for personal computers. A spreadsheet is often used to record numerical data and brief text phrases.
Which kind of join includes all the data from one table and the corresponding data from the other table?All rows from one table crossed with each row from the second table are returned by a CROSS JOIN, also referred to as a Cartesian JOIN. In other words, every possible combination of rows from the join table of a cross join is present.
To know more about spreadsheet visit:-
https://brainly.com/question/8284022
#SPJ1
our collection adt supports: group of answer choices first in first out access. retrieving an element based on its key. storage of null elements. retrieval by priority.
An abstract data type (ADT) is a logical definition of a collection of data and operations that can be performed on that data, independently of any implementation.
The collection ADT is a data structure that is widely used in computing to store and manage data in an ordered manner. It is a simple and effective way to manage large volumes of data, and it has many applications in the fields of computer science, engineering, mathematics, and business.The four options provided in the question are all supported by the collection ADT. These options are essential features of any collection data type, and they enable developers to retrieve, store, and manage data in a variety of ways. First-in, first-out access (FIFO) means that the first element that was added to the collection is the first one to be retrieved. This is often called a queue. Retrieving an element based on its key means that data can be accessed and managed based on a unique identifier. This is commonly used in hash tables and dictionaries. Storage of null elements means that the collection can handle empty values, which is useful in many applications. Retrieval by priority means that data can be sorted by a specific order, and accessed based on its priority. This is common in algorithms that require sorting, such as heaps and trees.
Learn more about abstract data type here:
https://brainly.com/question/13149249
#SPj11
you install a new linux distribution on a server in your network. the distribution includes a simple mail transfer protocol (smtp) daemon that is enabled by default when the system boots. the smtp daemon does not require authentication to send email messages. which type of email attack is this server susceptible to
As the smtp daemon does not require authentication to send email messages, this server is susceptible to a type of email attack called SMTP Spoofing.
SMTP Spoofing is an attack where malicious actors are able to send emails that appear to originate from another source.
This type of attack is possible because SMTP does not require authentication when sending messages, meaning anyone can send an email that appears to come from another address. As a result, attackers can disguise their malicious emails as coming from legitimate sources.
To prevent SMTP Spoofing, authentication should be enabled for any SMTP server in your network. Authentication requires that users provide valid credentials when sending emails, so malicious actors would not be able to disguise their emails as coming from legitimate sources.
Learn more about SMTP here:
https://brainly.com/question/30888452
#SPJ11
Which of the following are advantages of implementing cloud computing over services hosted internally? (Select THREE.)
a. Rapid elasticity b. On-demand services c. Metered services d. Extensive technical configuration e. On-site servers f. No Internet connection required
The advantages of implementing cloud computing over services hosted internally are: a. Rapid elasticity b. On-demand services c. Metered services.
a. Rapid elasticity: Cloud computing services can rapidly scale up or down based on the changing needs of the user, providing greater flexibility and agility than on-premises solutions.
b. On-demand services: Cloud computing services can be quickly provisioned and used as needed, without requiring extensive setup time or infrastructure investments.
c. Metered services: Cloud computing services are typically billed on a pay-per-use or subscription basis, allowing users to pay only for what they use and avoid over-provisioning.
The other options listed are not advantages of implementing cloud computing over services hosted internally:
d. Extensive technical configuration: Cloud computing services often require less technical configuration than on-premises solutions, making them easier to use and manage.
e. On-site servers: Cloud computing services are typically hosted in off-site data centers, eliminating the need for on-site servers.
f. No Internet connection required: Cloud computing services require an Internet connection to access, as they are hosted in remote data centers.
You can learn more about cloud computing at
https://brainly.com/question/19057393
#SPJ11
a data dictionary can be used to: a.record the database structure. b.encrypt the data. c.schedule tasks in projects. d.monitor performance.
A data dictionary can be used to record the database structure. So, the correct option is A.
A data dictionary is a software component that stores metadata about the data in a database system. A data dictionary is a source of documentation for an application, including information about schema objects such as tables, columns, and indexes, as well as integrity constraints, and system-level information like privileges and roles.
A data dictionary can be used for the following purposes:
To maintain information about the schema objects in the database system, including tables, columns, and indexes.To enforce consistency in the use of schema objects throughout the application development process.To enhance performance by providing information about the database system to the query optimizer.To provide application developers with a source of metadata about the database system that can be used to generate documentation automatically.To enhance security by providing information about access privileges and security-related objects such as roles and profiles.You can learn more about data dictionary at: brainly.com/question/8897251
#SPJ11
the text mentions four different ais threats. which type of threat is sabotage? a. intentional acts b. unintentional acts c. software errors and equipment failures d. natural and political disasters
5-1.1 Four distinct AIS dangers are mentioned in the text. Sabotage poses a particular kind of threat because intentional actions.
What is meant by intentional actions?To commit, focus, and pay attention to something that is significant to you is to be purposeful. You must decide what you want to do in advance and then take action to make it happen if you want to be intentional every day. It was done on purpose to do something. An intentional crime was not committed by mistake. Because you weren't paying attention, you can unintentionally run into your younger sibling in the corridor. The only way to intentionally trip him is to wait for him to pass by before sticking out your foot. When an injury is the consequence of a deliberate human activity, whether it is directed towards oneself or another, it is referred to as being "intentional". Self-inflicted harm as well as interpersonal violence done with the intent to hurt others are considered intentional injuries.To learn more about intentional actions, refer to:
https://brainly.com/question/29434012
In design view which is not a part of properties of a field
A. Primary key
B. Default value
C. Length
D. Auto value
Table Relationships: Table The connections between the fields in various tables are referred to as relationships. The connections between the data in one table and the data in another table established design view
Users of database management systems can build, change, and personalise a database's structure using the design view function. For designing tables, fields, and relationships between tables, it offers a visual interface. Users may define a field's data type, size, format, and other attributes in design view. To guarantee data integrity, they can also construct linkages between tables and implement validation criteria. Power users, database administrators, and developers frequently utilise design view while building or modifying databases to satisfy particular business needs. It provides a versatile and effective method for creating databases that can effectively store, arrange, and retrieve massive volumes of data.
Learn more about design view here:
https://brainly.com/question/29660206
#SPJ4
You want to scan a variety of family history documents and photos, many of which are very large. There are also some family history books that you need to scan.
Which of the follow scanners will MOST likely meet your scanning needs?
Flatbed scanner
The type of scanner that is most likely to meet the scanning needs of someone who wants to scan a variety of family history documents and photos, many of which are very large is a Flatbed scanner.
A flatbed scanner is a kind of scanner that uses a flat glass plate and a movable scanning head to make high-resolution digital scans of photos, documents, and other flat objects.
A flatbed scanner can scan photos, documents, books, and other flat objects with a high level of detail and resolution. It has a larger scanning area than other scanners, allowing you to scan larger documents and books.
It also has high color accuracy, allowing you to produce high-quality reproductions of your family history documents and photos. Thus, a Flatbed scanner is an ideal scanner for scanning family history books and photos.
drum scanner,
flatbed, and
handheld scanners.
Among these scanners flatbed scanner is most likely meet the scanning needs.
To know more about Flatbed scanner:https://brainly.com/question/983715
#SPJ11
a gantt chart can be best defined as the longest path through a network diagram that determines the earliest completion of a project. group of answer choices true false
Statement- A gantt chart can be best defined as the longest path through a network diagram that determines the earliest completion of a project.
Answer- False
Explanation
A Gantt chart can be defined as a horizontal bar chart that represents a project schedule or plan. It shows the start and end dates of each task, as well as any dependencies or relationships between tasks. It is a tool that aids in project planning and management. The longest path through a network diagram that determines the earliest completion of a project is referred to as the critical path. Therefore, the statement that "a Gantt chart can be best defined as the longest path through a network diagram that determines the earliest completion of a project" is false.
To learn more about "gantt chart", visit: https://brainly.com/question/2916641
#SPJ11
define a memwrite function with two parameters so that you can pass the address and the data as arguments to this function when you call this function. e.g. void memwrite(byte address, byte data). address is the memory address you are writing to, and data is the data that you are storing in memory. memwrite should activate the necessary address and control signals to select the physical memory address, and write the data to this address. 2) define a memread function with one parameter so that you can pass the address to be read from as the argument to this function. the function should return the data that is read from the memory. e.g. byte memread(byte address)
Here is an example implementation of the memwrite function:
void memwrite(byte address, byte data) {
// Activate the necessary address and control signals to select the physical memory address
// Write the data to this address
// Implementation details depend on the specific hardware and memory interface being used
// Example implementation:
memory[address] = data; // assuming 'memory' is an array of bytes representing the physical memory
}
Here is an example implementation of the memread function:
byte memread(byte address) {
// Read the data from the memory location specified by the address parameter
// Return the data that is read from the memory
// Implementation details depend on the specific hardware and memory interface being used
// Example implementation:
return memory[address]; // assuming 'memory' is an array of bytes representing the physical memory
}
To get a similar answer on memread:
https://brainly.com/question/10732807
#SPJ11
in oracle, a strictly relational table can be accessed as if it were an object table using a mechanism called: a. object view. b. nested tables. c. embedded objects. d. row objects.
Option-A: In Oracle, a strictly relational table can be accessed as if it were an object table using a mechanism called Object View.
A view is a stored SQL query that allows a user to query the data in multiple tables as if they were a single table.An object table is a table that is built with object type columns. An object type is a custom-defined composite data structure that is used as the datatype for one or more columns of a table or object view. For each row of an object table, the object type determines the attributes that are stored in the object column.
An object view is a type of view that is used to access data in a strictly relational table as if it were an object table. To create an object view, you define an object type that maps the columns of the relational table to the attributes of the object type. The object view then exposes the columns of the relational table as attributes of the object type, and you can use the object view to query and manipulate the data as if it were an object table.
For such more questions on Oracle:
brainly.com/question/13384148
#SPJ11