Twenty four blood samples were selected by taking every seventh blood sample from racks holding 199 blood samples from the morning draw at a medical center

A)calculate the FPCF for this sample


B)Should the population be considered effectively infinite

DO BOTH A AND B URGENT

Answer:

The least possible degree is 5.

Answer:

Step-by-step explanation:

11P3=11×10×9=990

[tex]11C_{3}=\frac{11 \times 10 \times 9}{3 \times 2 \times 1} =165[/tex]

Answer:

sp= 8000.00.

loss percent= 20%

loss amount = 20% of sp

= 20÷100 × 8000

= 1600

now,

costprice = sp + loss amount

= 8000 + 1600

= 9600

Answer: The decay rate is 8.4%, which means that the sample will have 91.6% of its original mass after one year, 91.6% of that amount after two years, and so on.

Therefore, we can write the relationship between y and t as:

y = 600 * (0.916)^t

This is an exponential decay function, where the initial value is 600 milligrams and the decay factor is 0.916 (1 minus the decay rate of 8.4%). As time t increases, the mass of the sample y decreases exponentially.

Step-by-step explanation:

la cantidad buscada es 1440.

Para encontrar la cantidad dada el 15% de la misma, podemos usar una ecuación:

15% de x = 216

Podemos convertir el porcentaje a decimal dividiendo por 100:

0.15x = 216

Luego, para despejar x, podemos dividir ambos lados de la ecuación por 0.15:

x = 216 / 0.15

x = 1440

Por lo tanto, la cantidad buscada es 1440.

Read more about percentage at

https://brainly.com/question/24877689

#SPJ1

Note that the journal for the above transaction is attached accordingly.

The journal entry records the purchase of land for $445,000, demolition expense of $37,600, land improvement cost of $55,583, building construction cost of $1,402,600 and lighting and paving cost of $88,536, all paid in cash.

Therefore, the amounts are debited to their respective accounts and credited to cash.

The total credit amount is equal to the total debit amount, ensuring the accounting equation remains in balance.

Learn more about journals;
https://brainly.com/question/27159868?
#SPJ1

Answer:

x = 0 , x = 2

Step-by-step explanation:

y = x² - 2x + 3 ← substitute y = 3

3 = x² - 2x + 3 ( subtract 3 from both sides )

0 = x² - 2x ←  factor out x from each term on the right side

0 = x(x - 2)

equate each factor to zero and solve for x

x = 0

x - 2 = 0 ⇒ x = 2

The estimated probability that it takes 10 or fewer shots to get his first successful shot is:

P(10 or fewer shots) ≈ 0.825

What is probability?

Probability is the study of the chances of occurrence of a result, which are obtained by the ratio between favorable cases and possible cases.

To estimate the probability that it takes 10 or fewer shots to get his first successful shot, we need to add up the number of dots for the first 10 bars on the dot plot.

From the given dot plot, we can see that the number of dots for each value up to 10 shots are:

0 + 9 + 6 + 5 + 4 + 4 + 2 + 2 + 0 + 1 = 33

Therefore, the estimated probability that it takes 10 or fewer shots to get his first successful shot is:

P(10 or fewer shots) ≈ 33/40

This can also be written as a decimal:

P(10 or fewer shots) ≈ 0.825

Hence, the estimated probability that it takes 10 or fewer shots to get his first successful shot is:

P(10 or fewer shots) ≈ 0.825

To know more about probability visit:

https://brainly.com/question/13604758

#SPJ1

Since the sample size is relatively small (n=25), the shape οf the histοgram may nοt perfectly reflect the underlying distributiοn οf the pοpulatiοn.

The gathered data is arranged in tables based οn frequency distributiοn. The infοrmatiοn cοuld cοnsist οf test results, lοcal weather infοrmatiοn, vοlleyball match results, student grades, etc. Data must be presented meaningfully fοr understanding after data gathering. A frequency distributiοn graph is a different apprοach tο displaying data that has been represented graphically.

The range οf the data is the difference between the maximum and minimum values:

Maximum value: 5.4

Minimum value: 3.4

Range: 5.4 - 3.4 = 2.0

Next, we divide the range by the desired number οf classes tο find the class width:

Class width = 2.0 / 6 = 0.3333 (rοunded tο 0.4)

Based οn the given data, we can expect the histοgram tο be apprοximately bell-shaped, with a peak arοund the middle classes (4.0-4.8) and fewer pencils in the extreme classes (3.4-3.8 and 5.4-5.8).

Hοwever, since the sample size is relatively small (n=25), the shape οf the histοgram may nοt perfectly reflect the underlying distributiοn οf the pοpulatiοn.

Learn more about frequency distribution, by the following link

https://brainly.com/question/16698786

#SPJ1

Another mathematical representation of how a rider on this Ferris wheel might move is :y =  cos(0.25x) + 40

Trigonometry is widely used in many fields, including physics, engineering, architecture, surveying, oceanography, and more. Here are several examples:

In astronomy and physics, trigonometry is used to compute the motions of moving objects, gauge the separations between planets and stars, and examine waves. Trigonometry is used in architecture and engineering to determine angles and distances for building structures like bridges and buildings.

In surveying, trigonometry is a tool used to determine angles and separations between points on the surface of the ground.

.

The function y = a cos(bx) + c, where an is the function's amplitude, b is its frequency, and c is its vertical shift, can be used to mimic the height of a rider on a Ferris wheel.

Given that the Ferris wheel's diameter in this instance is 60 meters, its radius is 30 metres. The Ferris wheel's center axle is 40 metres off the ground. This indicates that a rider is 70 metres above the earth when they are at the top of the Ferris wheel (30 + 40). A rider is 10 metres above the ground when they reach the bottom of the Ferris wheel. (40 - 30).

We can determine that the Ferris wheel's period is four minutes because it rotates once every four minutes. The following formula can be used to get our function's frequency:

f = 1/T, 1/4, and 0.25 Hz

Therefore, our function has a frequency of 0.25 Hz.

The vertical shift of our function is equivalent to 50% of the difference between a Ferris wheel passenger's maximum and minimum heights:

, c = (a_max + a_min) /2

c = (70 + 10) /2

c = 40

Therefore, 40 is the vertical shift of our function.

Finally, we must ascertain the function's amplitude. The difference between a Ferris wheel passenger's maximum and minimum heights is equal to half of the amplitude:

For example, c = (a_max + a_min) / 2 c = (70 + 10) / 2 c = 40

Therefore, 40 is the vertical shift of our function.

Finally, we must ascertain the function's amplitude. The difference between a Ferris wheel passenger's maximum and minimum heights is equal to half of the amplitude:

A=(a_max - a_min) / 2 A=(70 - 10) / 2 A=30

Therefore, our function has an amplitude of 30.

When you combine everything, you get:

Y equals a cos(0.25x) + 40

y = -25 cos(C), where C is the time in minutes since the motion started at position, is another potential mathematical model that could describe this motion. (0,-25).

To know more about trigonometry visit:

brainly.com/question/22986150

#SPJ1

Answer: Number 4 is the answer.

Hope this helps!

Explanation:

Assuming the two religions are mutually exclusive, this would mean 80%+2% = 82% of people are either Hindu or Muslim (but not both).

The remaining 100% - 82% = 18% of people are neither religion mentioned.

x = number of people in the village

18% of x = 36

0.18x = 36

x = 36/0.18

x = 3600/18

x = 200

Then,

80% of x = 0.80*x = 0.80*200 = 160 people are Hindu

The Venn diagram is shown below.

Answer:

There were 60 audience members at the seminar.

Step-by-step explanation:

Let's assume that the total number of audience members at the seminar is "x".

From the given information, we know that:

2/5 of the audience were students, so the number of students was (2/5)x

3/10 of the audience were retirees, so the number of retirees was (3/10)x

The rest were professionals, so the number of professionals was x - (2/5)x - (3/10)x = (1/10)x

We also know that there were 18 more students than professionals, so:

(2/5)x - (1/10)x = 18

Multiplying both sides by 10, we get:

4x - x = 180

Simplifying, we get:

3x = 180

x = 60

Therefore, there were 60 audience members at the seminar.

Given that 60% of Olivia's fruit salad is made up of apples as opposed to Amadou's fruit salad's 52.63%, Olivia's fruit salad will have a more apple-forward flavor based on percent.

The amount of apples in each fruit salad needs to be compared in order to determine which salad will taste more apple-like.

There are 19 cups of fruit in Amadou's fruit salad, of which 10 cups are apples. By dividing the total number of cups of fruit by the number of cups of apples, and multiplying the result by 100, we can get the proportion of apples in Amadou's salad:

Apple's percent of Amadou's fruit salad is equal to (10/19) x 100, or 52.63%.

There are 5 cups of fruit in Olivia's fruit salad, of which 3 cups are apples. We can use the same formula to determine how much apple is in Olivia's salad:

Olivia's fruit salad contains 60% apples, or (3/5) x 100.

As a result, Olivia's fruit salad will taste more apple-like because apples make up 60% of it as opposed to only 52.63% of Amadou's fruit salad.

It is important to keep in mind that the maturity, sweetness, and freshness of the fruits used, as well as other elements like the dressing and presentation, may all affect how the fruit salad tastes.

Learn more about percent here:

https://brainly.com/question/28670903

#SPJ1

we can say that if the cost per meter of laying pipes along the rural roads is less than the cost per meter of laying pipes through the field, then it would be less expensive to lay the pipes along the rural roads.

What is meter?

A meter is a unit of length in the International System of Units (SI). It is defined as the length of the path travelled by light in a vacuum during a time interval of 1/299,792,458 of a second. The symbol for meter is "m".

To determine which option is less expensive, we need to compare the cost of laying pipes along the rural roads to the cost of laying pipes through the field.

Let's assume that we need to lay a water pipe that is 100 meters long. If we choose to lay the pipe along the rural roads, the cost would be:

Cost = length of pipe x cost per meter = 100 x $3.00 = $300.00

If we choose to lay the pipe through the field, the cost would be:

Cost = length of pipe x cost per meter = 100 x $4.50 = $450.00

Therefore, laying the pipe along the rural roads would be less expensive in this case, with a cost of $300.00 compared to $450.00 for laying the pipe through the field.

In general, we can say that if the cost per meter of laying pipes along the rural roads is less than the cost per meter of laying pipes through the field, then it would be less expensive to lay the pipes along the rural roads. Conversely, if the cost per meter of laying pipes through the field is less than the cost per meter of laying pipes along the rural roads, then it would be less expensive to lay the pipes through the field.

To know more about meter visit:

https://brainly.com/question/1578784

#SPJ1

Full question:

It costs $3.00 per meter for the water pipes to go along the rural roads and $4.50 per meter for the water pipes to go through the field. Which option is less expensive? Explain how you found your answer.

Answer:

The correct answer:

D. (h, k)

By answering the presented question, we may conclude that the answer of the triangle [tex]A = (3/2)h^2 - (1/2)h\\[/tex] =>  [tex]A(h) = (3/2)h^2 - (1/2)h[/tex]

A triangle is a closed, double-symmetrical shape composed of three line segments known as sides that intersect at three places known as vertices. Triangles are distinguished by their sides and angles. Triangles can be equilateral (all factions equal), isosceles, or scalene based on their sides. Triangles are classified as acute (all angles are fewer than 90 degrees), good (one angle is equal to 90 degrees), or orbicular (all angles are higher than 90 degrees) (all angles greater than 90 degrees). The region of a triangle may be calculated using the formula A = (1/2)bh, where an is the neighbourhood, b is the triangle's base, and h is the triangle's height.

x = 3h - 1

A = (1/2)bh

A = (1/2)xh

A = (1/2)(3h - 1)h

[tex]A = (3/2)h^2 - (1/2)h\\[/tex]

[tex]A(h) = (3/2)h^2 - (1/2)h[/tex]

To know more about triangle visit:

https://brainly.com/question/2773823

#SPJ1

What is the percentage of values in a normal distribution between 16 and 21 with a mean of 16 and a standard deviation of 5, according to the 68-95-99.7 rule is approximately 68%.

How to calculate the percentage of values in a normal distribution?

According to the 68-95-99.7 rule, approximately 68% of the values in a normal distribution are within one standard deviation of the mean, approximately 95% are within two standard deviations of the mean, and approximately 99.7% are within three standard deviations of the mean.

In this case, we want to find the percentage of values in the distribution between 16 and 21.

The range from 16 to 21 is one standard deviation above the mean, since the mean is 16 and the standard deviation is 5. Therefore, approximately 68% of the values in the distribution will fall between 16 and 21.

So, the answer is approximately 68%.

To learn more about standard deviation, visit: https://brainly.com/question/475676

#SPJ1

Remark

I take it the semicircles cover the full width of the paper.

So the radius is [tex]24\div2 = 12 \ \text{cm}[/tex]

Since there are two of them, the area = a full circle.

Step One

Find the area of the rectangle before the cuts were made.

[tex]\text{Area = L} \times \text{W}[/tex]

[tex]\text{L = 30}[/tex]

[tex]\text{W = 24}[/tex]

[tex]\text{Area} = 30 \times 24 = 720 \ \text{cm}^2[/tex]

Step Two

Find the area of the circle cut outs.

[tex]\text{r} = 12[/tex]

[tex]\text{Area} = \pi \times \text{r}^2[/tex]

[tex]\text{Area} = 3.14 \times 12^2[/tex]

[tex]\text{Area} = 3.14 \times 144[/tex]

[tex]\text{Area} = 452.16 \ \text{cm}^2[/tex]

Step Three

Find the total area left

[tex]\text{Total Area Left = rectangle - circle}[/tex]

[tex]\text{Total Area Left} = 720 - 452.16[/tex]

[tex]\text{Total Area left} = 267.84 \ \text{cm}^2[/tex]   Answer

Option c y=0.48x+11 is the line of best fit to approximate the data in the scatterplot.

A statistical metric called a correlation coefficient shows the degree and direction of the association between two variables. Its value falls between -1 and 1, with -1 being a perfect negative correlation, 0 denoting no connection, and 1 denoting a perfect positive correlation. If there is a positive correlation, it implies that as one variable rises, the other variable likewise tends to rise, and if there is a negative correlation, it means that as one variable rises, the other variable tends to fall. The letter r is frequently used to represent the correlation coefficient.

Comparing the scatter plot with the given equations we observe that the slope of option b and d are very large as compared to the given distribution.

Observing from the given graph, the y-intercept of the best fit line will be nearly less than 20.

Thus, option c y=0.48x+11 is the line of best fit to approximate the data in the scatterplot.

Learn more about correlation coefficient here:

https://brainly.com/question/15577278

#SPJ1

Answer:

the answer is x=6

Step-by-step explanation:

the distance she hiked each day, we need to calculate the difference between the distance she hiked on consecutive days. Yolanda increased the distance she hiked by 1 mile each day.

To find the increase in the distance Yolanda hiked each day, we need to calculate the difference between the distance she hiked on each consecutive day.

The distance Yolanda hiked each day for the first three days can be represented as:

Day 1: d miles

Day 2: [tex]d + 1[/tex]  miles

Day 3:  [tex]d + 2[/tex] miles

The increase in distance from day 1 to day 2 is  [tex](d + 1) - d = 1[/tex]   mile.

The increase in distance from day 2 to day 3 is   [tex](d + 2) - (d + 1) = 1[/tex] mile.

Therefore, Yolanda increased the distance she hiked by 1 mile each day.

Learn more about distance here:

https://brainly.com/question/15172156

#SPJ9

Answer:

you could do 2 students in each group with one group of 3

Step-by-step explanation:

sorry if i didn't answer correctly

The volume of the apple is approximately 832.2 cubic centimeters.

The following equation determines a sphere's volume:

V = (4/3)πr³

When V denotes the sphere's volume, r denotes its radius, and denotes the mathematical constant pi (approximately 3.14). By seeing the sphere as an unlimited number of little cylinders piled on top of one another, the formula may be created. Each cylinder has a height equal to the sphere's shell thickness and a radius equal to the sphere's radius.

The volume of a sphere:

V = (4/3)πr³

Here, r = d/2 = 11.9 cm / 2 = 5.95 cm

Substituting the values we have:

V = (4/3)π(5.95 cm)³ ≈ 832.2 cm³

Therefore, the volume of the apple is approximately 832.2 cubic centimeters.

Learn more about volume of sphere here:

https://brainly.com/question/21623450

#SPJ1

Answer:

the concentration of sugar in the tank after 10 minutes is approximately 0.056 pounds per gallon.

Step-by-step explanation:

Let's first calculate the amount of sugar that will be added to the tank during the 10 minutes:Amount of sugar added = rate of sugar * time = 2 pounds/minute * 10 minutes = 20 poundsThe initial amount of water in the tank is 300 gallons, and 20 gallons per minute are being added, so after 10 minutes, the amount of water in the tank will be:Amount of water in the tank = initial amount of water + rate of water * time = 300 gallons + 20 gallons/minute * 10 minutes = 500 gallonsTherefore, after 10 minutes, the total volume of the mixture in the tank will be 500 gallons, and the total amount of sugar in the tank will be 8 + 20 = 28 pounds.To find the concentration of sugar in the tank, we divide the total amount of sugar by the total volume of the mixture:Concentration of sugar = total amount of sugar / total volume of mixture = 28 pounds / 500 gallons ≈ 0.056 pounds per gallon

We can use the formula:

concentration = (total sugar added in pounds) / (total water in gallons)

First, we need to find out how much sugar is added in 10 minutes. Since sugar is being added at a rate of 2 pounds per minute , in 10 minutes, we will have:

total sugar added = 2 pounds/minute * 10 minutes = 20 pounds

Next, we need to find out how much water is in the tank after 10 minutes. Since water is being added at a rate of 20 gallons per minute , in 10 minutes, we will have:

total water added = 20 gallons/minute * 10 minutes = 200 gallons

Therefore, the total amount of water in the tank after 10 minutes is:

total water = 300 gallons (initial water) + 200 gallons (water added) = 500 gallons

Finally, we can calculate the concentration of sugar in the tank by plugging in the values:

concentration = total sugar added / total water

concentration = 20 pounds / 500 gallons

concentration = 0.04 pounds/gallon

Therefore, after 10 minutes, the concentration of sugar in the tank is 0.04 pounds per gallon.

Answer:

Step-by-step explanation:

According to the given situation,

the area of figure A= l*b

                                =4m * 5m

                                =20m²

As the measures of the figure A and B is same,

the area of figure B = the area of figure A=20m²

the length of the side C and D are = 16m-8m-4m=4m

the area of figure C = l * b

                                 =4m*5m

                                 =20m²

As the measures of the figure C and D is same,

the area of figure D = the area of figure C=20m²

Area of the figure E=l * b

                               =8m * 13m

                               =104m²

∴ the area of the shaded region is =184m²

The statement and reason to complete the proof that TU² = TV · TW include the following:

Statement                                  Reason_____

TU² = TV · TW                        cross product.

In Mathematics and Geometry, the Tangent Secant Theorem states that if a secant segment and a tangent segment are drawn to an external point outside a circle, then, the product of the length of the external segment and the secant segment's length would be equal to the square of the tangent segment's length.

By applying the Tangent Secant Theorem to the given triangles after the definition of similarity step, we would cross-multiply as follows:

TU/TW = TV/TU                  definition of similarity

TU(TU) = TV(TW)                    cross product.

TU² = TV · TW                        cross product.

Read more on Tangent Secant Theorem here: https://brainly.com/question/26826991

#SPJ1

Answer:

what is it

Step-by-step explanation: