The statement "the period of a circular motion is directly proportional to the frequency of that motion" is true. The circular motion is a movement in which an object moves in a circular path.
The direction of the circular motion is always changing, but the distance from the center remains constant. The period of circular motion is defined as the time it takes for one full revolution of the object, while the frequency of circular motion is defined as the number of complete revolutions the object makes in a given time interval.
This is because the period and frequency are inversely related to each other, meaning that if one value increases, the other value decreases, and vice versa.
This relationship can be represented by the equation: T = 1/f where T is the period and f is the frequency. Since this equation is inverse, it means that T and f are inversely proportional. Therefore, the statement is true.
To know more about frequency, refer here:
https://brainly.com/question/29739263#
#SPJ11
Which one is greater among 40°C, 40°F and 40K?
Answer:
To compare these temperatures, we need to convert them to the same unit of temperature.
To convert Celsius (°C) to Kelvin (K), we add 273.15 to the Celsius value.
40°C + 273.15 = 313.15 K
To convert Fahrenheit (°F) to Celsius (°C), we can use the formula:
°C = (°F - 32) * 5/9
So,
40°F = (40 - 32) * 5/9 = 4.44°C
Now, we can convert 4.44°C to Kelvin using the formula:
4.44°C + 273.15 = 277.59 K
So the order from smallest to largest temperature is:
40°F < 4.44°C < 40°C < 277.59 K
Therefore, 40K is the greatest temperature among the three.
which skater, if either, has the greater momentum after the push-off? explain. match the words in the left column to the appropriate blanks in the sentences on the right.
The answer to Part A is that Ricardo has a larger magnitude momentum than Paula after the push-off. According to the law of conservation of momentum, the total momentum of an isolated system remains constant if no external forces are acting on it.
In this case, we can consider Paula and Ricardo as an isolated system since no external forces are acting on them during the push-off. Initially, the total momentum of the skaters is zero since they are at rest. After the push-off, the skaters move in opposite directions, and their momenta have opposite signs. However, the total momentum of the system must still be conserved.
Since Ricardo weighs more than Paula, he has a greater mass. Therefore, if both skaters push off with the same force, Ricardo will have a smaller velocity than Paula after the push-off. However, since momentum is a product of mass and velocity, we need to consider both factors to determine who has the greater momentum.
After the push-off, the total momentum of the system is non-zero and has the same magnitude for both skaters but opposite signs. Therefore, the magnitude of Ricardo's momentum must be greater than Paula's momentum, since he has a greater mass, and their velocities have opposite signs.
To learn more about magnitude momentum
https://brainly.com/question/14480863
#SPJ4
Complete question:
Two ice skaters, Paula and Ricardo, initially at rest, push off from each other. Ricardo weighs more than Paula. Part A Which skater, if either, has the greater momentum after the push-off? Explain. Match the words in the left column to the appropriate blanks in the sentences on the right. Reset Help zero Initially, the total momentum of the skaters is since they are at rest. After the push-off, the total momentum Therefore, Ricardo has after the push-off. non-zero increases decrease remains the same a larger magnitude momentum than Paula a smaller magnitude momentum than Paula the same magnitude momentum as Paula Submit Request Answer
forces and motion until test for physical science eginuity credit recovery ????
Forces and motion are fundamental concepts in physics that help us understand the behavior of objects in motion. Forces can cause objects to accelerate, change direction, or stop moving altogether.
The three laws of motion proposed by Sir Isaac Newton provide a framework for understanding how forces affect motion. The first law states that an object at rest will stay at rest, and an object in motion will stay in motion, unless acted upon by an external force. The second law states that the acceleration of an object is directly proportional to the net force acting on the object and inversely proportional to its mass. The third law states that every action has an equal and opposite reaction. To test these concepts in physical science, experiments can be designed to measure the effects of forces on motion, such as the acceleration of objects on inclined planes, the motion of objects in free fall, or the forces involved in collisions.
Learn more about forces here
https://brainly.com/question/13191643
#SPJ1
The complete question is
Forces and motion until test for physical science eginuity credit recovery ?
What type of water is most of the water on the earth?
A.
saltwater
B.
groundwater
C.
lake water
D.
freshwater
Answer:
Saltwater
Explanation:
Because of the oceans.
Answer:
A: Saltwater
Explanation:
97% of all water on earth is saltwater.
A 0.7 kg mass is attached to an ideal spring with a constant of 86 N/m. The mass is initially held at rest so that the spring is at its unextended length of 0.95 m. The mass is then released. What is the maximum distance the mass will fall?
Since the mass is attached to an ideal spring, the system will undergo simple harmonic motion. The maximum distance the mass will fall is equal to the amplitude of the oscillation.
The period of oscillation can be calculated as:
T = 2π√(m/k)
where m is the mass and k is the spring constant.
Substituting the given values, we get:
T = 2π√(0.7 kg / 86 N/m) ≈ 0.887 s
The maximum distance the mass will fall is equal to half the amplitude of the oscillation, which can be calculated using the equation:
x = A cos(2πt/T)
where x is the displacement of the mass from its equilibrium position at time t, and A is the amplitude of oscillation.
At the maximum displacement, cos(2πt/T) will be equal to -1. Therefore,
A = -x
The velocity of the mass at the maximum displacement will be zero. Therefore, the total energy of the system will be equal to the potential energy at the maximum displacement:
1/2 k A^2 = m g A
where g is the acceleration due to gravity.
Solving for A, we get:
A = (m g / k) = (0.7 kg x 9.81 m/s^2) / 86 N/m ≈ 0.0807 m
Therefore, the maximum distance the mass will fall is approximately 0.0807 m.
A second pendulum made of brass keeps correct time at 10°C. How many seconds will it lose or gain per Day when the temperature of its surroundings rises to 35°C?
The brass pendulum will lose or gain approximately 0.0015 seconds per day when the temperature of its surroundings rises from 10°C to 35°C
Calculation on the pendulumThe time period of a pendulum is given by the formula:
T = 2π√(L/g)
where T is the time period, L is the length of the pendulum, and g is the acceleration due to gravity.
Since both pendulums have the same length and are located in the same gravitational field, their time periods are equal. Therefore, the time gained or lost by the brass pendulum due to the change in temperature can be calculated using the following formula:
ΔT = T × α × ΔT
where ΔT is the change in temperature, α is the coefficient of linear expansion of brass, and T is the original time period.
The coefficient of linear expansion of brass is approximately 19 × 10^-6 /°C.
Substituting the values given in the problem, we get:
ΔT = T × α × ΔT
= (2π√(L/g)) × (19 × 10^-6 /°C) × (35 - 10) °C
= 2π√(L/g) × (0.000019) × (25) °C
= 2π√(L/g) × 0.000475
Assuming a standard pendulum length of 1 meter, the time gained or lost by the brass pendulum can be calculated as follows:
ΔT = 2π√(L/g) × 0.000475
= 2π√(1/9.81) × 0.000475
≈ 0.0015 seconds
Therefore, the brass pendulum will lose or gain approximately 0.0015 seconds per day when the temperature of its surroundings rises from 10°C to 35°C.
Learn more on time period of pendulum here https://brainly.com/question/11746625
#SPJ1
which type of scale has all the properties of an interval scale with the additional attribute of representing absolute quantities, characterized by a meaningful absolute zero?
The type of scale that has all the properties of an interval scale with the additional attribute of representing absolute quantities, characterized by a meaningful absolute zero, is a ratio scale.
The type of scale that has all the properties of an interval scale with the additional attribute of representing absolute quantities, characterized by a meaningful absolute zero is a ratio scale. In a ratio scale, the values not only have an order and equal intervals but also a true, non-arbitrary zero point.
This means that ratios of values are meaningful, and one can meaningfully say that a value is, for example, twice or half of another value. Examples of ratio scales include measurements of weight, length, time, temperature in Kelvin, and counts of discrete objects. Ratio scales provide the most precise and informative type of measurement and are widely used in scientific and statistical analysis.
To know more about scale, here
brainly.com/question/31315229
#SPJ4
to create a low pass filter from an inverting op amp configuration, one has to: group of answer choices add a capacitor in series with the input resistance add a capacitor in parallel with the feedback resistor both a and b none of the above
To create a low pass filter from an inverting op-amp configuration, one has to add a capacitor in parallel with the feedback resistor, which corresponds to option B in your group of answer choices. Option b) is the right answer.
1. Start with an inverting op-amp circuit, which typically consists of an operational amplifier (op-amp) with an input resistor (R1) connected to the inverting input and a feedback resistor (R2) connected between the inverting input and the output.
2. Add a capacitor (C) in parallel with the feedback resistor (R2). This step corresponds to option B in your question.
By adding the capacitor in parallel with the feedback resistor, we create a low pass filter circuit. The purpose of a low pass filter is to allow low-frequency signals to pass through while attenuating (reducing) the amplitude of higher-frequency signals.
The capacitor's impedance decreases as the frequency of the input signal increases, which means that more of the signal will pass through the capacitor and less through the feedback resistor. This results in a lower gain for higher-frequency signals, effectively filtering them out. Therefore, the answer is option b).
Know more about capacitor here:
https://brainly.com/question/17176550
#SPJ11
The complete question is:
To create a low pass filter from an inverting op amp configuration, one has to: group of answer choices
a) add a capacitor in series with the input resistance
b) add a capacitor in parallel with the feedback resistor
c) both a and b none of the above.
an object with mass m is suspended at rest from a spring with a spring constant of 200 n/m . the length of the spring is 5.0 cm longer than its unstretched length l, as shown above. a person then exerts a force on the object and stretches the spring an additional 5.0 cm. what is the total energy stored in the spring at the new stretched length?
The total energy stored in the spring at the new stretched length is 2.25 Joules.
The potential energy stored in a spring is given by the formula:
U = (1/2) k x²
where U is the potential energy, k is the spring constant, and x is the displacement from the equilibrium position. Initially, the spring was stretched by 5.0 cm, so its displacement from the equilibrium position is x = 0.05 m + 0.05 m = 0.10 m.
The force applied to stretch the spring is given by Hooke's law, F = kx, where F is the force applied, k is the spring constant, and x is the displacement from the equilibrium position. The force applied to stretch the spring by an additional 5.0 cm is,
F = kx = (200 N/m)(0.05 m) = 10 N
The total displacement of the spring is now x = 0.10 m + 0.05 m = 0.15 m. The total potential energy stored in the spring is:
U = (1/2) k x² = (1/2)(200 N/m)(0.15 m)² = 2.25 J
To know more about spring, here
brainly.com/question/30284705
#SPJ4
a small bar magnet experiences a 1.70×10−2 n⋅m torque when the axis of the magnet is at 45.0∘ to a 5.00×10−2 t magnetic field. so given theta the torque and u0 we have
u0= torque / BSINTHETA
IT KEEPS COMING OUT WRONG
THE UNITS I BELIEVE ARE A*m^2 i BELIEVE. SO PLEASE SOMEONE HELP ASAP
The magnetic dipole moment of the bar magnet is approximately 0.038 A*m^2.
To calculate the magnetic dipole moment of the bar magnet, we can use the equation: μ = τ / (B sinθ)
where μ is the magnetic dipole moment, τ is the torque experienced by the magnet, B is the magnitude of the magnetic field, and θ is the angle between the magnetic field and the axis of the magnet.
Substituting the given values, we get:
[tex]μ = (1.70* 10^-2 N*m) / (5.00*10^-2 T * sin45°)[/tex]
μ ≈ 0.038 A*m^2
Note that the units of magnetic dipole moment are Am^2 or J/T, which are equivalent. The units of torque are Nm, and the units of magnetic field are T, as given in the problem.
Therefore, the magnetic dipole moment of the bar magnet is approximately 0.038 A*m^2.
To learn more about dipole moment here:
https://brainly.com/question/14140953
#SPJ11
the diagram below illustrates the geometry of lunar phases with the moon shown in 8 positions in its orbit. which numbered position with a first quarter moon?
The diagram you are referring to demonstrates the various Lunar phases as the Moon orbits Earth. To identify the numbered position representing the first quarter moon, let's understand the different lunar phases.
The primary lunar phases are:
1. New Moon
2. First Quarter
3. Full Moon
4. Last Quarter
These phases occur as the Moon orbits Earth, with the illuminated side of the Moon (the side facing the Sun) changing based on its position relative to Earth.
In the case of the first quarter moon, it occurs when the Moon has completed one-quarter of its orbit around Earth since the new moon. During this phase, half of the Moon's illuminated side is visible from Earth, making it appear as a semicircle in the sky.
Now, let's consider the numbered positions in the diagram:
1. New Moon - Moon is between Earth and the Sun, and its illuminated side is facing away from Earth.
2. Waxing Crescent - A small part of the illuminated side is visible, as the Moon moves away from the New Moon position.
3. First Quarter - The Moon has completed one-quarter of its orbit, and half of the illuminated side is visible from Earth.
4-7. Waxing Gibbous, Full Moon, Waning Gibbous, and Last Quarter - Other positions/phases as the Moon continues its orbit.
8. Waning Crescent - The Moon is almost back to its New Moon position.
To Learn More About Lunar
https://brainly.com/question/14683225
#SPJ11
Compare the direction that a transverse wave travels with the direction that matter in the wave vibrates
In a transverse wave, matter vibrates in a direction that is parallel to the wave motion, whereas the direction of energy transfer is perpendicular to the wave's direction of motion.
How can the direction that a transverse wave moves be compared to the direction that the wave's constituent matter vibrates?A transverse wave transfers energy in a direction that is perpendicular to the way that the wave's constituent matter vibrates. For instance, when a rope is shaken back and forth to produce a wave, the energy moves perpendicular to the rope's motion from one end to the other.
In contrast, the path of energy transfer in a longitudinal wave is parallel to the direction in which the wave's constituent matter vibrates. For instance, as sound waves pass through air, the molecules in the air oscillate back and forth parallel to the wave's motion.
To learn more about transverse wave visit:
brainly.com/question/13863548
#SPJ9
An object moving at a constant speed requires 6.0 s to go once around a circle with a diameter of 4.0 m. What is the magnitude of the instantaneous acceleration of the particle during this time? a. 2.2 m/s^2 b. 2.7 m/s^2 c. 3.3 m/s^2 d. 3.8 m/s^2 e. 4.4 m/s^2
The magnitude of the instantaneous acceleration of the object during this time is approximately 2.2 m/s^2 (option a).
To find the magnitude of the instantaneous acceleration of the object moving in a circle, we will first find the object's speed and then use the formula for centripetal acceleration. Here's a step-by-step explanation:
1. Determine the circle's radius:
The diameter of the circle is given as 4.0 m, so the radius (r) is half of that: r = 4.0 m / 2 = 2.0 m.
2. Calculate the circumference of the circle:
Circumference (C) = 2 * π * r = 2 * π * 2.0 m ≈ 12.57 m.
3. Calculate the object's speed:
The object takes 6.0 s to go once around the circle. Therefore, its speed (v) is the circumference divided by the time: v = C / t = 12.57 m / 6.0 s ≈ 2.095 m/s.
4. Calculate the centripetal acceleration:
The formula for centripetal acceleration (a_c) is a_c = v^2 / r. Substitute the values of v and r into the formula: a_c = (2.095 m/s)^2 / 2.0 m ≈ 2.2 m/s^2.
So, the magnitude of the instantaneous acceleration of the object during this time is approximately 2.2 m/s^2 (option a).
To know more about instantaneous acceleration, refer here:
https://brainly.com/question/13149078
#SPJ11
Which of the following statements BEST predicts the outcome of the chemical reaction?
Answer:
Explanation:
what are the statement
Gibb's and Helmholtz equations predicts the direction and spontaneity of chemical reactions.
What is Gibb's and Helmholtz equation ?The Gibbs-Helmholtz equation is a thermodynamic equation that is used to calculate changes in a system's Gibbs free energy as a function of temperature. It explains how the Gibbs free energy, first proposed by Josiah Willard Gibbs, fluctuates with temperature.
Gibb's and Helmholtz equation is given by,
[tex](\frac{\partial(\frac{G}{T}) }{\partial T} )}}\right)_{p}=-{\frac {H}{T^{2}}},}[/tex]
where T is the absolute temperature, H is the enthalpy, and G is the Gibbs free energy of the system, all under constant pressure p. According to the equation, the change in the G/T ratio under constant pressure as a result of an infinitesimally small change in temperature is a factor H/T2.
There is insufficient information about this problem, however the problem may be like this.
As a result, the direction and spontaneity of chemical processes are predicted by the Gibbs and Helmholtz equations. As a result, the answer is the Gibbs and Helmholtz equations.
To know more about Gibb's free energy :
https://brainly.com/question/20358734
#SPJ2.
what types of exoplanets are easiest to detect with the transit method? group of answer choices large planets far from their host stars hot planets far from their host stars large planets close to their host stars hot planets close to their host stars
The types of exoplanets that are easiest to detect with the transit method are: large planets close to their host stars and hot planets close to their host stars.
What is an exoplanet, An exoplanet or extrasolar planet is a planet that orbits a star outside of the Solar System's planetary system. It is detected indirectly by measuring its gravitational influence on its host star, its thermal or other radiation, or the effects of its atmosphere on the light from its host star as it passes through it.
What is the transit method, The transit method is one of the ways that exoplanets can be detected. It entails detecting a dip in a star's brightness when an exoplanet passes in front of it. A change in the star's apparent brightness is caused by the decrease in the amount of light reaching the observer due to the exoplanet being in the way.
What types of exoplanets are easiest to detect with the transit method, The transit method is most effective for detecting large planets close to their host stars or hot planets close to their host stars. This is due to the fact that such exoplanets are more likely to cause a significant decrease in their host star's brightness when they transit. As a result, smaller exoplanets or those far from their host stars may be difficult to detect with this technique.
For more such questions on exoplanets
brainly.com/question/13617262
#SPJ11
A copy machine uses a lens to make an image of a page in the physics textbook to print a copy. When the print is regular size, both the book and its image are 16.0 cm from the lens.
A. What is the focal length of this lens?
B. If the lens is moved so that it is 24 cm from the book, what is the distance to the new image?
C. This new image will be (Magnified, reduced, or same size) compared to the original book. How do you know?
A. The lens's focal length is 8.0 cm.
B. 12.0 cm separates you from the new image.
C. m = -0.5, Because of the negative magnification, we can infer that the image is perpendicular to the object.
What is focal length?The ability of a lens or curved mirror to focus or bend light depends on its focal length. The distance between the center of the lens or mirror and the point where parallel light rays appear to converge after passing through the lens or reflecting off the mirror is more precisely defined as this distance.
We may infer that the picture is smaller than the original book because the magnitude of the magnification is less than 1 (i.e., the absolute value of the magnification is less than 1).
How do you determine it?
A. The thin lens formula, which is as follows, can be used to determine the focal length of the lens.
1/f = 1/di + 1/do
where f is the lens's focal length, di is its distance from the image, and so is its separation from the object (in this case, the textbook).
We can set di = do = 16.0 cm because the distance between the textbook and its image is 16.0 cm. Using the thin lens formula with these values as inputs, we obtain:
1/f = 1/16.0 + 1/16.0
If we simplify, we get:
1/f = 1/8.0
The result of multiplying both sides by 8.0 is:
f = 8.0 cm
Thus, the lens's focal length is 8.0 cm.
B. We may use the narrow lens calculation once more to get the distance to the new image if the lens is moved to a position where it is 24 cm away from the book.
Since the lens is now 24 cm away from the book, we may set do = 24.0 cm and find di by using the same formula as before:
1/f = 1/di + 1/24.0
1/8.0 = 1/di + 1/24.0
When we simplify and solve for di, we obtain:
di = 12.0 cm
Thus, 12.0 cm separates you from the new image.
C. By using the magnification equation, we may determine whether the new image is bigger, smaller, or the same size as the original book.
m = -di/do
Where m is the image's magnification (a negative sign means the picture is inverted with respect to the object), di is the lens's distance from the image, and do is the lens's distance from the object.
The values from section B allow us to determine the magnification:
m = -12.0/24.0
If we simplify, we get:
m = -0.5
Because of the negative magnification, we can infer that the image is perpendicular to the object.
To know more about focal length, visit:
brainly.com/question/29870264
#SPJ1
Question 12 (1 point)
Jared has been running in the park on a hot day when he feels his legs begin
spasming in an unusual way. He feels shaky. He thinks back to what he learned in
fitness class about heat emergencies for what to do. What should Jared do FIRST?
Run home to take a cold shower.
Find a cool place to rest.
Begin stretching carefully.
Buy a sports drink with electrolytes.
Find a cool place to rest. It is important for Jared to get out of the heat and lower his body temperature as quickly as possible.
What is temperature?Temperature is a physical property of matter that is a measure of the average kinetic energy of the particles in a substance. It is the measure of hot and cold, and is usually expressed in terms of the Celsius, Fahrenheit, or Kelvin scale. Temperature affects the state of matter, and can be used to determine whether a substance is solid, liquid, or gas. Additionally, temperature affects the rate of chemical reactions, and can be used as a metric in which to measure the amount of energy being released or absorbed. Temperature is very important to all forms of life, as living organisms rely on temperature to survive and thrive.
Taking a cold shower, stretching and replenishing electrolytes can all happen after he finds a cool place to rest.
To learn more about temperature
https://brainly.com/question/27944554
#SPJ1
the north pole of a magnet is moved toward a copper loop, as shown below. if you are looking at the loop from above the magnet, will you say the induced current is circulating clockwise, counterclockwise, or is equal to 0?
When the north pole of a magnet is moved toward a copper loop, if you are looking at the loop from above the magnet, you will say the induced current is circulating counter clockwise.
An induced current is a current that is generated when a magnetic field moves through a conductor or wire loop. When the magnetic field lines cut across a wire loop or conductor, it generates a voltage across the loop, causing an electric current to flow through it, which is known as an induced current.
The direction of the induced current is dependent on the polarity and direction of the magnetic field lines and the direction of motion of the magnetic field relative to the wire loop.
To determine the direction of the induced current, we must use the right-hand rule, which states that if the thumb of your right hand points in the direction of the magnetic field line, and your fingers wrap around the wire loop in the direction of motion of the magnetic field,
then the direction of the induced current in the wire loop is determined by the direction of your extended fingers.
In this case, the north pole of the magnet is moving toward the copper loop, which generates a magnetic field in the wire loop in the opposite direction to that of the north pole of the magnet. As a result, the induced current will circulate counterclockwise through the copper loop if you are looking at it from above the magnet.
Learn more about induced current here:
https://brainly.com/question/26898099
#SPJ11
an 80.0 kg skydiver jumps out of a balloon at an altitude of 1000 m and opens the parachute at an altitude of 200.0m (A). Assuming that the total resisting force on the driver is constant at 50.0 N with the parachute closed and constant at 3 600 N with the parachute open, what is the speed of the driver when he lands on the ground?(B) do you think the skydiver will get hurt? explain(C) At what height should the parachute be opened so that the final speed of the skydiver when he hits the ground in 5.00 m/s?(d) how realistic is the assumption that the total resisting force is constant? explain
ANSWERS:
A. 38.3 m/s
B. Yes. 38.3 m/s is a very high speed and could potentially cause serious injury or death
C. 656.1 m
D. Not very realistic. The resisting force depends on the speed of the skydiver.
EXPLANATIONS:
(A) To solve for the speed of the skydiver when he lands on the ground, we can use conservation of energy. The initial potential energy of the skydiver is equal to the final kinetic energy plus the final potential energy.
Initial potential energy = mgh1 = 80.0 kg x 9.8 m/s^2 x 1000 m = 784000 J
Final potential energy = mgh2 = 80.0 kg x 9.8 m/s^2 x 200.0 m = 156800 J
With the parachute closed, the total resisting force is 50.0 N, so we can use the work-energy principle to find the final kinetic energy:
Work done by resisting force = Fd = 50.0 N x (1000 m - 200 m) = 40000 J
Final kinetic energy = Initial potential energy - Work done by resisting force - Final potential energy
Final kinetic energy = 784000 J - 40000 J - 156800 J = 587200 J
Finally, we can solve for the speed using the equation for kinetic energy:
Final kinetic energy = (1/2)mv^2
587200 J = (1/2)(80.0 kg)v^2
v = sqrt(1468 m^2/s^2) = 38.3 m/s
Therefore, the speed of the skydiver when he lands on the ground is 38.3 m/s.
(B) It's difficult to say whether the skydiver will get hurt based solely on the speed of impact. However, 38.3 m/s is a very high speed and could potentially cause serious injury or death. Other factors, such as the angle of impact and the condition of the ground, would also affect the outcome.
(C) We can use the same conservation of energy equation as in part (A), but solve for the height at which the parachute should be opened to achieve a final speed of 5.00 m/s.
Initial potential energy = mgh1 = 80.0 kg x 9.8 m/s^2 x h1
Final potential energy = mgh2 = 80.0 kg x 9.8 m/s^2 x 0
With the parachute open, the total resisting force is 3600 N, so we can use the work-energy principle to find the work done by the resisting force:
Work done by resisting force = Fd = 3600 N x (h1 - 0) = 3600h1 J
Then we can solve for the height using the equation:
Initial potential energy - Work done by resisting force = Final kinetic energy + Final potential energy
mgh1 - 3600h1 = (1/2)mv^2 + 0
Simplifying and solving for h1:
h1 = (v^2)/(2g) + 3600/g = (5.00 m/s)^2 / (2 x 9.8 m/s^2) + 3600/9.8 = 656.1 m
Therefore, the parachute should be opened at a height of 656.1 m to achieve a final speed of 5.00 m/s.
(D) The assumption that the total resisting force is constant is not very realistic because the resisting force depends on the speed of the skydiver. As the skydiver falls faster, the resisting force will increase due to air resistance. Therefore, the actual speed of the skydiver with the parachute closed and the actual speed with the parachute open would not be constant.
You will pilot your drone through a series of obstacles. While doing so one of your rescue team members will document the time it takes you to fly from one obstacle to the next. That data will be populated in the following table:
My data table
(position) (distance) (time) (type of maneuver)
(Start to obstacle 1) (13’6”) (9 seconds) (around)
(obstacle 1 to obstacle 2) (31’1”) (20 seconds) (under)
(Obstacle 2 to obstacle 3) (27’3”) (38 seconds) (Precision landing)
(Obstacle 3 to End) (35’6”) (13 seconds) (Precision landing)
You will now present your data using three visual tools. You may create these illustrations using any tools you like Import pictures of your work into this performance task.
I only need someone to do me a graph for Position - Velocity Graph
The graph will be such that a blue line represents the position of the drone over time, while the orange line represents its velocity.
How to explain the graphA position-velocity graph, also known as a PV graph or a phase space plot, is a graphical representation of an object's position and velocity over time. It is a two-dimensional graph where the x-axis represents position and the y-axis represents velocity.
As you can see, the drone starts off relatively slow, then accelerates quickly to reach its maximum velocity during the second maneuver, before slowing down again for the final two maneuvers.
This graph gives a visual representation of how the drone's position and velocity change over time during the course of the obstacles.
Learn more about graph on:
https://brainly.com/question/30459583
#SPJ1
a 10-kg dog is runnng with a speed of 5.0 m/s. what is the minimum work required to stop the dog in 2.40 seconds? group of answer choices 125 j 75 j 50 j 100 j
The minimum work required to stop a 10-kg dog running with a speed of 5.0 m/s in 2.40 seconds is 125 J .
We are given that a 10-kg dog is running with a speed of 5.0 m/s. We need to find the minimum work required to stop the dog in 2.40 seconds. Work done to stop the dog = change in kinetic energy of the dog.
Let the initial velocity of the dog be u = 5.0 m/s.
The final velocity of the dog when it is stopped is v = 0 m/s.
The mass of the dog is m = 10 kg. Work done = 1/2 × m × (v² - u²).
Work done = 1/2 × 10 × (0² - 5.0²)Work done = 1/2 × 10 × (-25)
Work done = -125 J.
We get a negative value for the work done because the direction of work is opposite to the direction of motion of the dog. Therefore, the minimum work required to stop the dog in 2.40 seconds is 125 J.
Know more about kinetic energy here:
https://brainly.com/question/8101588
#SPJ11
consider the situation shown. a triangular, aluminum loop is slowly moving to the right. eventually, it will enter and pass through the uniform magnetic field region represented by the tails of arrows directed away from you. initially, there is no current in the loop. when the loop is exiting the magnetic field, what will be the direction of any induced current present in the loop?
The induced current will flow in a clockwise direction to oppose the change in magnetic flux that produced it.
When the loop is exiting the magnetic field, any induced current present in the loop will flow in a clockwise direction. A triangular aluminum loop that is slowly moving to the right enters and passes through a uniform magnetic field region represented by the tails of arrows directed away from you, and it has no current in the loop initially.
What is electromagnetic induction?Electromagnetic induction is the phenomenon where an electromotive force (emf) or a current is generated in a conductor exposed to a varying magnetic field.
An electric current is created if there is relative motion between the conductor and the magnetic field. When a magnetic field is applied to a conductor, the electrons in the conductor are influenced by the magnetic field, causing them to move,
resulting in the creation of an electric current.The direction of an induced current is determined by Lenz's law, which states that the direction of an induced current is such that it opposes the change in magnetic flux that generated it. In this situation, when the loop is exiting the magnetic field,
To learn more about : flux
https://brainly.com/question/29221352
#SPJ11
a 32-kg child decides to make a raft out of empty 1.0-l water bottles and duct tape. neglecting the mass of the duct tape and plastic in the bottles, what minimum number of water bottles will the child need to be able to stay dry on the raft?
Ignoring the mass of duct tape and plastic in the bottles, a child will need at least 4 water bottles to stay dry on the raft. The child will need at least four water bottles to stay dry on the raft.
The buoyancy force exerted by the water on the raft must be greater than or equal to the weight of the child to keep the child afloat and dry on the raft. The buoyancy force is given by Archimedes' principle, which states that it is equal to the weight of the water displaced by the raft.
The volume of each 1.0 L water bottle is 0.001 m^3. The density of water is approximately 1000 kg/m^3. Therefore, each water bottle has a buoyant force of:
Buoyant force = Volume of water displaced x Density of water x Acceleration due to gravity
Buoyant force = 0.001 m^3 x 1000 kg/m^3 x 9.81 m/s^2
Buoyant force = 9.81 N
To find the minimum number of water bottles needed to keep the child afloat, we need to divide the weight of the child by the buoyant force of one water bottle:
Minimum number of water bottles = Weight of child / Buoyant force per bottle
Minimum number of water bottles = 32 kg / 9.81 N
Minimum number of water bottles = 3.26 (rounded up to 4)
To learn more about buoyancy force
https://brainly.com/question/13267336
#SPJ4
a cable that weighs 2.5 lb/ft is used to lift 1000 lb of coal up a mine shaft 400 ft deep. find the work done.
So, the work done to lift the coal and the cable is 600,000 ft-lb.
To find the work done, you need to consider both the weight of the coal and the weight of the cable. The work done is the force required to lift the objects multiplied by the distance they are lifted.
1. Work done for lifting the coal:
Weight of coal = 1000 lb
Distance lifted = 400 ft
Work done = weight × distance = 1000 lb × 400 ft = 400,000 ft-lb
2. Work done for lifting the cable:
Weight of cable per foot = 2.5 lb/ft
As the cable is lifted, its effective weight decreases since a part of it has already been lifted. To calculate the work done, we need to find the average weight of the cable during the lift.
Average weight = (initial weight + final weight) / 2
Initial weight = 2.5 lb/ft × 400 ft = 1000 lb
Final weight = 0 lb (since it's all lifted)
Average weight = (1000 lb + 0 lb) / 2 = 500 lb
Distance lifted = 400 ft
Work done = average weight × distance = 500 lb × 400 ft = 200,000 ft-lb
3. Total work done:
Total work = work done for coal + work done for cable = 400,000 ft-lb + 200,000 ft-lb = 600,000 ft-lb
Hence, 600,000 ft-lb of work was required to lift the cable and the coal.
To learn more about : cable
https://brainly.com/question/28917025
#SPJ11
the absorption of infrared radiation by atmospheric gases and the random re-radiation of the energy back towards earth and into space is known as
The process of absorbing infrared radiation by atmospheric gases and then randomly re-radiating the energy back towards Earth and into space is referred to as the greenhouse effect.
This is a natural phenomenon that helps to regulate the Earth's temperature and make it habitable.Infrared radiation is a type of electromagnetic radiation that has longer wavelengths than visible light. The Sun emits this type of radiation, which is absorbed by the Earth's surface and then re-radiated back into the atmosphere as heat.
Greenhouse gases in the atmosphere, such as carbon dioxide, water vapor, methane, and nitrous oxide, absorb some of this heat and re-radiate it back towards the Earth. This results in a warming effect known as the greenhouse effect. It is known as the greenhouse effect because it operates in a similar manner to a greenhouse.
A greenhouse traps heat by allowing sunlight to enter but preventing heat from escaping. Similarly, greenhouse gases trap heat in the atmosphere by allowing sunlight to enter but preventing heat from escaping into space.
The greenhouse effect is a natural and necessary process that keeps the Earth's temperature at a suitable level for human habitation.
Learn more about greenhouse effect here:
https://brainly.com/question/1577730
#SPJ11
a two-dimensional uniform flow of water passes over a bump as shown. the flow is slow enough that the water surface remains flat. a weak vortex containing vorticity of strength 10 [1/sec] lying along a vertical axis is introduced upstream of the bump. you may ignore viscous effects. the flow is from right to left. which sketch is true? explain in dropbox.
The sketch that is true is given in option (c). a weak vortex containing vorticity of strength 10 [1/sec] lying along a vertical axis is introduced upstream of the bump.
A vortex is a region in a fluid in which the flow revolves around an axis line, the fluid motion in a vortex is smooth, continuous, and follows a curved path around the axis. In this problem, a weak vortex containing vorticity of strength 10 [1/sec] lying along a vertical axis is introduced upstream of the bump. The flow is two-dimensional, uniform, and slow enough that the water surface remains flat. Ignoring viscous effects, the water flow from right to left passes over a bump. We have to find the correct sketch of the flow.
In a 2D uniform flow of water passing over a bump, the streamlines deflect slightly in front of and behind the bump. They converge before the bump and diverge behind the bump, forming eddies that eventually dissipate. A vortex in the flow will also form an eddy, which will interact with the eddies from the bump. This will result in a complex flow pattern. The sketch that shows the complex flow pattern and a weak vortex upstream of the bump is option (d). Hence, the correct answer is option (c).
Learn more about vortex at:
https://brainly.com/question/14805380
#SPJ11
what is the speed of a wave with a frequency of 2 Hertz and a wavelength of 87 m?
0.023 m/s
43.5 m/s
89 m/s
174 m/s
Answer:
The answer to your problem is, D. 174 m/s
Explanation:
Formula:
wave speed = frequency * wavelength
Speed of wave = 2Hz × 87m ( Look at question for the numbers )
Speed of wave = 174m/s
Simple math..
Thus the answer to your problem is, 174m/s
a particle of mass m is embedded at a distance r/4 from the center of a massless circular disc of radius r which can roll without slipping down a plane inclined at an angle a with the horizontal. Use the Lagrangian method to write the dif- ferential equation of motion for the system
The differential equation of motion for the system using the Lagrangian method is D²θ/Dt² + (g/[(19/8) r]sin α)θ = 0.
As a question answering bot on Brainly platform, here are the tips to be followed while answering the questions:1. Always be factually accurate, professional, and friendly2. Be concise and do not provide extraneous amounts of detail3. Ignore any typos or irrelevant parts of the question4. Use appropriate grammar and spelling
5. Answer the question directly and clearly6. Provide sources if necessary, to support your answer7. Do not engage in arguments or personal attacks while answering questions8. Be respectful and helpful towards other users while answering questions
9. Make sure your answer is easy to read and understandable.10. Edit and proofread your answer before submitting.
The differential equation of motion for the system is given by the Lagrangian method when a particle of mass m is embedded at a distance r/4 from the center of a massless circular disc of radius r that can roll without slipping down a plane inclined at an angle a with the horizontal. Using the Lagrangian method, the differential equation of motion for
the system is given as follows:L = T - VL = [1/2 m(r² + (r/4)²)ω² + 1/2 Iω²] - mgrsin(α)r/4Here, I = [1/2 m(r/2)²] + m(r/4)²I = [1/2 m(r²/4 + r²/16)] + m(r²/16)I = m(r²/8)Therefore, I = mr²/4Then, the expression of Lagrangian can be given as:L = [1/2 m(r² + r²/16)ω² + 1/2 (mr²/4)ω²] - mgrsin(α)r/4L = [1/2 m(17r²/16)ω² + (1/8)mω²] - mgrsin(α)r/4L = [1/8 mω²(17r² + 2r²) - mgrsin(α)r/4]L = [1/8 mω²(19r²) - mgrsin(α)r/4]So, the Lagrangian equation of motion for the system is given as:D²θ/Dt² + (g/[(19/8) r]sin α)θ = 0
To learn more about : Lagrangian
https://brainly.com/question/13161394
#SPJ11
similarities and differences between the last time the globe warmed and the climate changes occurring today.
The similarity between the last time the globe warmed and the climate change occurring today is that both are caused by the emission of greenhouse gases into the atmosphere.
Greenhouse gases trap heat from the sun in the atmosphere, causing the earth's temperature to increase. The difference between the two is that the current warming is happening much faster than the last time the globe warmed. This is largely due to the amount of greenhouse gases that have been released into the atmosphere since the industrial revolution. In addition, the current warming is affecting the global climate in more extreme ways than the last time the globe warmed, with more frequent and intense storms, droughts, and heatwaves.
learn more about climate change Refer:brainly.com/question/16945209
#SPJ1
7. (a) How much heat energy would be required to convert 2.5kg of ice at 10 °C to steam at 100 °C?
Answer:
the answer up top is correct