the mean of eight numbers is 25. when two extra numbers are included the mean of the ten numbers is 24. find the mean of the two extra numbers.

Answer:

x = -7, 17.

Step-by-step explanation:

I am assuming it's:

35/ x-3 = X-7/4

(x - 3)(x - 7) = 4*35

x^2 - 10x + 21 = 140

x^2 - 10x - 119 = 0

(x - 17)(x + 7) = 0

x = -7, 17.

Answer:

25.92cm²

Step-by-step explanation:

First, do 2.4x3.6=8.64

then multiply by length so 8.64x6=25.92

Hope this helps

Answer:

about 307.08 square feet

Step-by-step explanation:

[tex] \frac{1}{2} (20)(15) + \frac{1}{2} \pi( {10}^{2} ) = 307.08[/tex]

Population will be 43,160 in 76 years if a town doubles its size every 38 years if the current population is 6,790.

Since the town doubles in size every 38 years, we can use the formula:

P = P0 * 2^(t/T)

where P0 is the initial population, P is the population after time t, and T is the doubling time (38 years in this case).

We know that the current population is P0 = 6,790, and we want to find the population in 76 years, which is t = 76. Plugging these values into the formula, we get:

P = 6,790 * 2^(76/38)

P = 6,790 * 2^2

P = 6,790 * 4

P = 27,160

Therefore, the population of the town will be 27,160 in 76 years.

To know more about time refer here:

https://brainly.com/question/15356513#

#SPJ11

The given information says that the number of calls coming to the customer care center of a mobile company per minute is a Poisson random variable with a mean of 5, So the probability that no call comes in a certain minute is 1

                 A Poisson distribution is a probability distribution that shows the probability of a certain number of events occurring within a specific time or space, provided that these events occur at an average rate that is constant throughout the space or time.

             Given a Poisson random variable with mean λ, the probability of observing x occurrences of an event in a certain time interval is given by:

                          P(X = x) = (e^(-λ) * λ^x) / x!,

             where e is Euler's number (approximately equal to 2.71828).

We are required to find the probability that no call comes in a certain minute, i.e., P(X = 0).

Substituting the given values into the Poisson distribution formula:

                     P(X = 0) = (e^(-5) * 5^0) / 0!

                                   = (1 * 1) / 1

                                   = 1

    Therefore, the probability that no call comes in a certain minute is 1.

Learn more about Poisson random variable with a mean at: https://brainly.com/question/9123296

#SPJ11

The rate of decrease in volume of the snowball when its diameter is 12 cm is approximately 1.36 cm³/min.

When a spherical snowball is melting, it's diameter decreases at a rate of 0.3 cm/min. The rate of change of volume of a sphere is given by:dV/dt= (4π/3)r²(dr/dt)Since the diameter is given as 12 cm, the radius of the snowball is 6 cm.So the diameter is decreasing at a rate of 0.3 cm/min.

We are to find the rate of decrease in volume of the snowball when the diameter is 12 cm.The radius of the snowball is given by r = 6 cm, and the rate of change of its diameter is d = -0.3 cm/min.At this point, we need to calculate the rate of decrease in volume of the snowball when the diameter is 12 cm.

The rate of decrease in volume of the snowball is given bydV/dt = (4π/3)r²(dr/dt)dV/dt = (4π/3)(6 cm)²(-0.3 cm/min)≈ -1.36 cm³/minTherefore, the rate of decrease in volume of the snowball when the diameter is 12 cm is approximately -1.36 cm³/min.

To know more about volume click on below link:

https://brainly.com/question/1578538#

#SPJ11

In Circuit B, the ammeter is connected in series with resistor R1 and the voltmeter is connected in parallel with resistor R2.

Therefore, the circuit is correctly setup to measure the desired quantities.

The correct circuit for measuring the current through resistor R1 and the potential difference across R2 is Circuit B. Circuit B is formatted with an ammeter measuring the current through R1 and a voltmeter measuring the potential difference across R2.

An ammeter is used to measure current and should be connected in series with the component it is measuring; whereas a voltmeter is used to measure potential difference and should be connected in parallel with the component it is measuring.

for such more questions on correct circuit

https://brainly.com/question/16511109

#SPJ11

The statement that would be true of the reflection of the existing fountain across the y - axis is B. There are two sets of parallel lines: T'V' || R'U' and T'R' ||  V'U'

A reflection of a shape would lead to a congruent shape in another part of the graph. This means that the new shape would have the same set of parallel lines as the original.

The quadrilateral TRUV had parallel line sets of TV || RU and TR || VU so the reflected figure would have congruent parallel lines at T'V' || R'U' and T'R' ||  V'U'.

Find out more on reflection at https://brainly.com/question/29788009

#SPJ1

The options for the question are:

There are two sets of parallel lines: TV VU and TR || R'U

There are two sets of parallel lines: T'V' || R'U' and T'R' ||  V'U'

The points T. R, U, and V have these coordinates: (-2,-7),(6,7),(-2,-4)

.and (-6,-4).

The points T. R. U, and V have these coordinates: (2,-7), (6,7),(2,-4) and (6,-4)

answer - y = -5x + 1

Based on the diagram, the point of tangency is Point Z. Therefore, the answer is B.

A point of tangency is a point at which a straight line, called a tangent line, touches a curve or a circle at only one point.

At the point of tangency, the tangent line is perpendicular to the radius of the circle that intersects the point of tangency.

The point of tangency is the point where a tangent line to the circle touches the circle at only one point.

In the given diagram, the line segment XZ appears to be a tangent to the circle.

Therefore, the point of tangency is the point where the line segment XZ touches the circle.

To know more about tangent line visit:

https://brainly.com/question/30162653

#SPJ9

Answer:

q=5,R=2

Step-by-step explanation:

=5×2+(2×5-10)

=10+(10-10)

=10+0

=10

A sample size of 1068 is needed with a 95% confidence level and a 3% margin of error to estimate the proportion of people who support a political candidate.

To determine the sample size needed to estimate the percentage of people who support the political candidate with a 3% margin of error at a 95% confidence level, we can use the formula:

n = (z^2 * p * (1 - p)) / (E^2)

where n is the sample size, z is the z-value corresponding to the desired confidence level (95% confidence level corresponds to z = 1.96), p is the estimated proportion of the population that supports the candidate (we can use 0.5 as a conservative estimate), E is the desired margin of error (3% or 0.03)

Substituting the values into the formula, we get:

n = (1.96^2 * 0.5 * (1 - 0.5)) / (0.03^2) = 1067.11

Rounding up to the nearest integer, we need a sample size of 1068 to estimate the percentage of people who support the political candidate with a 3% margin of error at a 95% confidence level.

To know more about confidence interval:

https://brainly.com/question/24131141

#SPJ4

We know that the temperature was 56°F at midnight, so we can plot the point (24, 56)

What is graph ?

Graph can be defined as visual representation of given data using the ordered pairs.

To graph Elroy's data, we can use the x-axis to represent the time of day in hours and the y-axis to represent the temperature in degrees Fahrenheit.

First, we can plot the point (6, 50) to represent the temperature at 6am.

Next, we can use the information that the temperature rose 3° per hour for the next 4 hours. This means that at 10am, the temperature would be 50 + 3(4) = 62°F. We can plot this point at (10, 62). Similarly, we can find the temperature at 7am, 8am, and 9am using the same formula and plot those points as well.

Then, we can use the information that the temperature rose 2° per hour for the next 6 hours. This means that at 4pm, the temperature would be 62 + 2(6) = 74°F. We can plot this point at (16, 74). Similarly, we can find the temperature at 11am, 12pm, 1pm, 2pm, and 3pm using the same formula and plot those points as well.

The temperature then stayed steady until 6pm, so we can draw a horizontal line at y = 74 from 4pm to 6pm.

For the next 2 hours, the temperature dropped 1° per hour. This means that at 8pm, the temperature would be 74 - 2 = 72°F. We can plot this point at (20, 72). Similarly, we can find the temperature at 7pm using the same formula and plot that point as well.

Therefore,  we know that the temperature was 56°F at midnight, so we can plot the point (24, 56).

To learn more about Graph from given link.

https://brainly.com/question/17267403

#SPJ1

Using a constant factor, the number that completes the ratio table is calculated as: A. 64.

To complete the ratio table, we can observe that each number in the second row is obtained by multiplying the corresponding number in the first row by a constant factor of 8.

Thus, the ratio of the first row number to the second row number is 1:8.

This means that:

2 * 8 = 16

13 * 8 = 104

8 * 8 = 64.

Therefore, we can also get the correct number that completes the ratio table by multiplying 8 by 8, which is:

8 * 8 = 64.

So, the missing number in the ratio table is: A. 64.

Learn more about ratio on:

https://brainly.com/question/13513438

#SPJ1

By understanding these techniques, the client will be better able to manage the symptoms of genital herpes and reduce the risk of further infections.

The client's statement that "I should rub rather than scratch in response to itching" indicates that the teaching has been effective. This response demonstrates an understanding of the importance of not scratching, as scratching can lead to further irritation and infection. It is also important to ensure that the client understands the other hygiene care techniques they should be using when living with genital herpes. These include applying a water-based lubricant to their lesions, avoiding tight clothing such as underwear and pants, and keeping the area clean and dry by using a mild soap or diluted hydrogen peroxide and water.

for such more questions on techniques

https://brainly.com/question/30634430

#SPJ11

Answer: you are

Step-by-step explanation:because how long is the amount of time it takes to get in the firetruck. Simply put yes you add the minutes it takes

Answer:

13

Step-by-step explanation:

(6^8)(10^3)(8^2)(25^5)=1049760000000000000

so 13 zeros after 104976

There are 100,000 possible five-digit student ID numbers that can be created if repeat digits are allowed (10^5).

However, if repeats are not allowed, there are only 9 x 9 x 9 x 9 x 9 = 590,490 possible student ID numbers that can be created (9^5).

The reason for the difference is that when repeats are allowed, you can use the same digit multiple times, for example "11111".

When repeats are not allowed, you can only use each digit once, for example "12345". The possible permutations of the digits 0-9 increase as more digits are added to the ID number, meaning that the more digits there are, the more possible combinations there are.

Therefore, when repeats are not allowed, the number of possible combinations is reduced significantly. In the case of five-digit student ID numbers, the difference is almost twofold.

To know more about combinations click on below link:

https://brainly.com/question/20211959#

#SPJ11

Using trigonometric relations we can see that u = 4.28m

First we can find the length of the shared side using the trigonometric relation:

tan(56°) = x/1.65m

1.65m*tan(56°) = x

2.45m = x

Then the length of the bottom side of the right triangle in the right side is iven by:

tan(43°) = 2.45m/y

Solving for y:

y =  2.45m/tan(43°)

y = 2.63m

Then the length of u is:

u = 1.65m + 2.63m = 4.28m

Learn more about right triangles at:

https://brainly.com/question/2217700

#SPJ1

The given image is trapezoid and to obtain the image there are two different ways: 1. Plotting the points 2. Transformations

What is trapezoid?

In geometry, a trapezoid is a four-sided polygon that has at least one pair of parallel sides. The parallel sides of a trapezoid are called bases, while the non-parallel sides are called legs.

The image below appears to be a trapezoid with vertices at A(2,2), B(4,5), C(6,5), and D(8,2). There are several ways to obtain this image, but here are two possible methods:

Method 1: Plotting the Points

One way to obtain the image is to plot the points A, B, C, and D on a coordinate plane, and then connect them in the correct order to form the trapezoid. Here are the steps:

Draw a coordinate plane with x and y axes.

Plot the point A at (2,2).

Plot the point B at (4,5).

Plot the point C at (6,5).

Plot the point D at (8,2).

Connect the points A, B, C, and D in the order ABDC to form the trapezoid.

Method 2: Transformations

Another way to obtain the image is to start with a reference trapezoid with known vertices, and then apply a sequence of transformations to obtain the desired trapezoid. Here are the steps:

Start with a reference trapezoid with vertices at (0,0), (2,3), (4,3), and (6,0). This trapezoid has the same shape as the desired trapezoid, but is located in a different position on the coordinate plane.

Translate the reference trapezoid 2 units to the right and 2 units up by adding (2,2) to each vertex. This results in a trapezoid with vertices at (2,2), (4,5), (6,5), and (8,2), which is the desired trapezoid.

(Optional) Rotate or reflect the trapezoid as desired to obtain different orientations or symmetries.

To learn more about trapezoid visit:

https://brainly.com/question/1410008

#SPJ1

We calculate that the probability of selecting an unripe cherry and an apple is roughly 6.22%.

To estimate the probability that you pick an apple that is ripe and a cherry that is not ripe, we can use a simulation. Here's one way to do it:

622 / 10,000 = 0.0622, or approximately 6.22%.

Therefore, based on this simulation, we estimate that the probability of picking a ripe apple and a cherry that is not ripe is approximately 6.22%. Note that the actual probability may be slightly different due to the random nature of the simulation.

To learn more about probability click here

brainly.com/question/30034780

#SPJ4

The mass of a 2018 Olympic gold medal in hectograms is 58.6 hg.

First, we need to know the mass of the Olympic gold medal in grams. According to the question, the mass of an Olympic gold medal is 586 grams.

To convert grams to hectograms, we need to divide the mass in grams by 100. This is because there are 100 grams in 1 hectogram.

To do the division, we can use a calculator. Dividing 586 by 100 gives us 5.86.

The answer we get is in hectograms, so we can write it as 5.86 hg. This means that the mass of a 2018 Olympic gold medal is 5.86 hectograms.

To know more about hectograms, refer here:

https://brainly.com/question/1058206#

#SPJ11

Therefore , the solution of the given problem of angles comes out to be the right response is option d 122°.

Using Cartesian coordinates, the top and bottom walls divide the circular lines that make up a skew's ends. There is a chance that two poles will meet at a junction point. Angle is another outcome of two things interacting. They mirror dihedral forms the most. A two-dimensional curve can be created by arranging two line beams in various ways at their extremities.

Here,

180 degrees is the length of a straight circle. It has been split into a 58-degree angle and an unidentified angle, as far as we are aware. So that we can determine the size of the undetermined angle, let's use subtraction:

=> Angle unknown = 180 degrees minus 58 degrees

=> Angle unknown = 122 degrees

As a result, the undetermined angle is 122° in size.

The right response is (d) 122°.

To know more about angles visit:

https://brainly.com/question/14569348

#SPJ1

According to the question this equation represents a single point in the xy-plane, and does not have a constant rate of change. It doesn't have a linear function as a result.

When the roots and solutions of two equations match, they are said to be equivalent. The same number, symbols, or expression must be added to or subtracted from both the equation's two sides to produce an equivalent equation. By multiplying or dividing both sides of an equation by a nonzero number, we can also obtain an analogous equation.

Equation representing a linear function:

Y is equivalent to x plus 5 times the negative one-fourth.

Linear functions have a constant rate of change, which means that as x increases or decreases by a certain amount, y also changes by a constant amount. The equation y equals negative one fourth times x plus 5 has a constant slope of negative one fourth, which means that for every increase of one in x, y will decrease by one fourth. This is a characteristic of a linear function.

The equation y equals two thirds times x squared represents a quadratic function, which has a curved graph.

The equation x = 5 is a linear equation, but it only represents a vertical line passing through x = 5. It does not have a slope or a y-intercept, which are necessary for a linear function.

The equation 2x + 7 = 12 can be simplified to a linear equation of the form y = mx + b by solving for y:

2x + 7 = 12

2x = 5

x = 5/2

Substituting x = 5/2 back into the equation gives:

y = 2(5/2) + 7 = 12

This equation represents a single point in the xy-plane, and does not have a constant rate of change. Therefore, it is not a linear function.

To know more about equation visit:

https://brainly.com/question/2972832

#SPJ1

The distance from the bottom of the building to the point where the ladder is touching the building for Triangle 2 is 14 feet.

What is triangle?

A triangle is a polygon with three sides and three angles. It is one of the most basic geometric shapes and is often used in geometry, trigonometry, and other branches of mathematics.

Since Triangle 1 and Triangle 2 are similar right triangles formed from the same ladder leaning against the same building, their corresponding sides are proportional to each other.

Let's use the concept of similarity and proportions to solve for the unknown distance in Triangle 2. We can set up the following proportion based on the corresponding sides of the two triangles:

(vertical leg of Triangle 1) : (horizontal leg of Triangle 1) = (vertical leg of Triangle 2) : (horizontal leg of Triangle 2)

We know that in Triangle 1:

the length of the hypotenuse (the ladder) is 16 feet

the length of the horizontal leg (the distance along the ground) is 8 feet

the length of the vertical leg (the distance from the bottom of the building to the point where the ladder is touching the building) is 16 feet

Using the Pythagorean Theorem, we can solve for the length of the vertical leg of Triangle 2:

(vertical leg of Triangle 1) : (horizontal leg of Triangle 1) = (vertical leg of Triangle 2) : (horizontal leg of Triangle 2)

16 : 8 = (vertical leg of Triangle 2) : 7

Simplifying the proportion, we get:

2 : 1 = (vertical leg of Triangle 2) : 7

To solve for the vertical leg of Triangle 2, we can multiply both sides of the proportion by 7:

2 * 7 : 1 * 7 = (vertical leg of Triangle 2)

14 : 1 = (vertical leg of Triangle 2)

Therefore, the distance from the bottom of the building to the point where the ladder is touching the building for Triangle 2 is 14 feet.

To learn more about triangle visit:

https://brainly.com/question/1058720

#SPJ1

The parameters a, b, and c of a quadratic function model have different real-world meanings that relate to the specific context of the data being analyzed. In the case of the quadratic function model used to analyze the amount of money spent on prescription drugs per capita between 1990 and 2003.

The parameters can be defined as follows:

a: The parameter a represents the coefficient of the squared term in the quadratic function model. In the context of the amount of money spent on prescription drugs per capita, a represents the curvature of the relationship between time and spending.

A positive value of a indicates a U-shaped curve, while a negative value of a indicates an inverted U-shaped curve.

b: The parameter b represents the coefficient of the linear term in the quadratic function model. In the context of the amount of money spent on prescription drugs per capita, b represents the rate of change of spending over time.

A positive value of b indicates that spending is increasing over time, while a negative value of b indicates that spending is decreasing over time.

c: The parameter c represents the intercept of the quadratic function model. In the context of the amount of money spent on prescription drugs per capita, c represents the initial amount of spending at the beginning of the time period being analyzed.

Hence, a represents the curvature of the relationship between time and spending, b represents the rate of change of spending over time, and c represents the initial amount of spending at the beginning of the time period.

To know more about quadratic function model, refer here:

https://brainly.com/question/28863338#

#SPJ11

The formula to calculate interest charge when the musician does not make any payments for one month is Interest = Principal * Rate * Time. Using the given values, the interest charge for the first month is $97.15, making the total owed amount at the end of the first month $2,997.15.

If the musician does not make any payments for one month, the amount owed will accumulate interest. To calculate the interest charge, we can use the following formula:

Interest = Principal * Rate * Time

where the principal is the initial amount owed, the rate is the monthly interest rate as a decimal, and the time is the time period in months.

In this case, the principal is $2,900, the monthly interest rate is 3.35% expressed as a decimal (0.0335), and the time is one month.

So, the interest charge for the first month will be:

Interest = $2,900 * 0.0335 * 1

Interest = $97.15

Therefore, at the end of the first month, the musician will owe the initial balance of $2,900 plus the interest charge of $97.15, for a total of $2,997.15.

Learn more about interest rates here: brainly.com/question/14540021

#SPJ4

The correlation coefficient measures the linear relationship between two variables, meaning that it assumes that the relationship between the two variables can be described by a straight line.  Thus option C, D, E, F is correct.

The following statements are true:

The correlation coefficient is a unitless number and must always lie between –1.0 and +1.0, inclusive.

The correlation coefficient, r, gives us information about the strength and direction of a linear relationship between any two variables.

If r is the correlation between two variables x and y then -r is the correlation between y and x.

The larger r is in absolute value, the stronger the relationship is between the two variables.

The statement "The correlation coefficient gives us information about the number of outliers compared to the number of data points" is false.

The statement "The correlation coefficient, r, is equal to the number of data points that lie on the regression line divided by the total number of data points" is also false.

Therefore, The larger r is in absolute value, the stronger the relationship is between the two variables.

Learn more about coefficient here:

https://brainly.com/question/30066987

#SPJ9

Philippe can perform a simulation of rain or no rain for tomorrow by spinning a spinner with two sections labeled "Rain" and "No rain."

The spinner could be divided into two sections, one labeled "Rain" and the other labeled "No rain." To perform the simulation, Philippe would need to give the spinner a spin and observe which section it lands on. If it lands on the "Rain" section, he would consider that as an outcome of rain for tomorrow, and if it lands on the "No rain" section, he would consider that as an outcome of no rain for tomorrow. To make the simulation more accurate, he could repeat the process multiple times and record the number of times the spinner lands on each section.

Learn more about probability here: brainly.com/question/30034780

#SPJ4

The total 2-way variable achieved by the given tests is 6.

How to find 2-way variable?

There are three pairs of variables, and each pair can have two possible values, resulting in 2-way variable value configurations. Therefore, the total 2-way variable value configuration coverage achieved by the given tests is 6, as follows:

A=0, B=0

A=0, C=1

B=0, C=1

A=0, B=1

A=1, B=0

A=1, C=0

Learn more about 2-way variable

brainly.com/question/29435977

#SPJ11