Technician A states that about 33% of the heat energy created is wasted by being dumped straight out
of the exhaust to the atmosphere. Technician B states that 33% is wasted by internal friction and from
radiating off hot engine components straight to the atmosphere. Who is correct?
Select one:
A. Technician A
B. Technician B
C. Both A and B
D. Neither Anor B

Answer:

TRUE

Explanation:

Concrete is forced into all parts of its form through a process called hydration.

The concrete is known to be one that solidifies and also hardens via a chemical method known to be hydration.

This is when water reacts with the cement, and it is one that bonds the other components together and so Concrete is forced into all parts of its form through a process called hydration.

Learn more about hydration from

https://brainly.com/question/5060579

#SPJ1

The frequency to use depends on the range and distance of signal transmission. There is government communication agency in charge of issuing license in order to get carrier frequency in which the application can work with.

UHF means Ultra - high frequencies which is mostly used in television broadcasting and mobile phone. Frequency range of the UHF is between 300MHz to 3GHz.

Assuming that you have a wireless application you would like to design, build and sell as a commercial product. And you have selected a target frequency in the UHF range.

Most wireless applications make use of radio wave and microwave depending on the range of distance in which the signal will travel.

Bandwidth = 2[tex]F_{s}[/tex]

Where [tex]F_{s}[/tex] = sidebands frequency

The bullet points above highlighted how  you can decide what frequency to use and how would you get permission to use it

Learn more here:  https://brainly.com/question/24793150

Answer:

i think it would be the top, the hotter the water the more pressure and sense pressure builds at the top of water heater tanks you would want the outlet pipe at the top

Explanation:

I think it would be the top, the hotter the water the more pressure and sense pressure builds at the top of water heater tanks you would want the outlet pipe at the top.

The process of transforming electrical current into heat energy is known as electric heating. An electrical resistor serves as the heating element in an electric heater, and heat is generated there when an electric current flows through it.

This procedure is frequently utilized in a wide range of domestic applications. from using an electric burner to prepare food, a kettle to boil water, and of course, house heating.

With one significant exception—they don't rely on a boiler and a system of pipes to produce the heat—electric heaters and radiators function exactly like your central heating radiators that are plumbed in.

Therefore, I think it would be the top, the hotter the water the more pressure and sense pressure builds at the top of water heater tanks you would want the outlet pipe at the top.

To learn more about Heating, refer to the link:

https://brainly.com/question/1429452

#SPJ2

Answer:

I'm not sure but I'm pretty sure it the second one (btw I'm sorry if this didn't help) :/

Answer:

We use Eq 9−67 and 9−68 to find the velocities of the particles after their first collision (at x=0 and t=0 )

ν

1f

​

−

m

1

​

+m

2

​

m

1

​

+m

2

​

​

ν

1i

​

=

0.30kg+0.40kg

0.30kg−0.40kg

​

(2.0m/s)=−0.29m/s

ν

2f

​

=

m

1

​

+m

2

​

2m

1

​

​

ν

1i

​

=

0.30kg+0.40kg

2(0.30kg)

​

(2.0m/s)=1.7m/s .

At a rate of motion of 1.7m/s,2x

w

​

=140cm (the distance to the wall and back to x=0 ) will be traversed by particle 2 in 0.82s . At t=0.82s , particle 1 is located at

x=(−2/7)(0.82)=−23cm ,

and particle 2 is " gaining " at a rate of (10/7)m/s leftward ; this is their relative velocity at that time . Thus , this "gap" of 23cm between them will be closed after an additional time of (0.23m)/(10/7m/s)=0.16s has passed . At this time (t=0.82+0.16=0.98s) the two particles are at x=(−2/7)(0.98)=−28cm

Explanation:

Answer: okiiiii

Explanation:

Answer:

The variable head permeability test is one of various methods for determining soil permeability. It is used to determine the permeability of relatively new soil. Permeability refers to a soil's ability to enable water to pass through its pores or spaces.

Explanation:

Answer:

Technology

Explanation:

It’s made to meet desire

It should be noted that Anything that is made to meet a need or desire is Technology.

Technology can be regarded as the practical application of science.

Technology can be seen in areas such as

However, Technology came up because of the necessity for it, people desire it.

Learn more Technology at;

https://brainly.com/question/25110079

Answer:

C

Explanation:

As horsepower is the rate  at which that force torque  is a twisting or turning force, horsepower is produced. Hence option  C is correct.

Horsepower is defined as a unit used to describe the pace at which labor is done or to quantify power, frequently in relation to the output of engines or motors. Standardization and types of horsepower vary widely. A car's engine power is measured in horsepower (hp); the greater the number, the more power is transferred to the wheels and, in theory, the faster it will travel.

To put it simply, horsepower is your overall speed and power, whereas torque allows you to feel the sensation of acceleration when you put your foot down. When you realize that horsepower is derived from torque, this makes sense. Torque is a unit of rotational or twisting force. The power an engine produces is referred to as horsepower.

Thus, as horsepower is the rate  at which that force torque  is a twisting or turning force, horsepower is produced. Hence option  C is correct.  

To learn more about horsepower, refer to the link below:

https://brainly.com/question/12260337

#SPJ2

Answer:

A =41 .....

......

......

....C=21

Answer:

protect the employee once the hazard into contact with them.

Answer:

What is this exactly?

Explanation:

If your asking for the definition, binary classification is the task of classifying the elements of a set into two groups on the basis of a classification rule.

Answer:

The voltage to be measured is applied between the two spheres and the distance or spacing S between them gives a measure of the sparkover voltage. ... In the case of a.c. peak value and d.c. voltage measurements, the applied voltage is uniformly increased until sparkover occurs in the gap.

Answer:

D

Explanation:

Answer:

A dibber or dibble or dibbler

Explanation:

A dibber or dibble or dibbler is a pointed wooden stick for making holes in the ground so that seeds, seedlings or small bulbs can be planted. Dibbers come in a variety of designs including the straight dibber, T-handled dibber, trowel dibber, and L-shaped dibber

Answer:

blah blah blah sh ut up read learn

An immediate strength loss. This is why Sling Webbing has red core yarns to visually reveal damage and act as a basis for sling rejection.

▞▞<☵>▆▇█▓▒­░─╤╦╱彡( ⱫɆ₳Ⱡ )彡╲╦╤─░▒▓▇▆▅<☵>▞▞

The  purpose of the red-core yarns in the synthetic sling is to detect the strength loss and also to reveal the damage in the red corn yarns.

Lifting slings constructed of synthetic materials like nylon or polyester are known as synthetic slings. These kinds of slings, which can also be called synthetic lifting straps or synthetic rigging slings, are thin, flexible, and protected by a jacket.

Sling Webbing features red core yarns to visibly indicate damage and serve as a reason for sling rejection because of this.  Synthetic sling are flexible.

Therefore, it can be concluded that The red-core yarns in the synthetic sling are used to both reveal and detect strength loss in the red maize yarns. It also acts as the basis for sling rejection.

Learn more about Synthetic sling here:

https://brainly.com/question/27088476

#SPJ2

Answer:  So to calculate the flexural strength (σ), multiply the force by the length of the sample, and then multiply this by three. Then multiply the depth of the sample by itself (i.e., square it), multiply the result by the width of the sample and then multiply this by two

Explanation:

Answer:

wala naman pong pic po wala kahit walang pic magan da parin

Answer:

True

Explanation:

To summarise, waves carry energy. The amount of energy they carry is related to their frequency and their amplitude. The higher the frequency, the more energy, and the higher the amplitude, the more energy.

Answer:

forced convection

Explanation:

When a fan, pump or suction device is used to facilitate convection, the result is forced convection. Everyday examples of this can be seen with air conditioning, central heating, a car radiator using fluid, or a convection oven.

Answer:

go on then

Explanation:

Security Information and events management describes an integration of Information and event management in the aspect of organizational security.

Hence, SIEM could leverage the capability of machine learning models and generated data in other build a robust security system.

Learn more : https://brainly.com/question/25675806

Answer:

Agricultural engineers attempt to solve agricultural problems concerning power supplies, the efficiency of machinery, the use of structures and facilities, pollution and environmental issues, and the storage and processing of agricultural products.

Answer:

use this, it should help you understand

Explanation:

https://www.electronics-tutorials.ws/logic/logic_5.html