Please help ASAP! Thank you

The height of the cliff diver after 1.25 seconds is 35 feet.

A mathematical notion known as a function connects an input to an output. It resembles a mechanism with an input and an output, where the input and output are somehow connected. For instance, if we have a function f(x) = x + 1, we can enter 2 and get 3 as the result.

To find the height of the cliff diver after 1.25 seconds, we can plug in t = 1.25 into the height function H(t) = -16t^2 + 32t + 20 and evaluate it.

H(1.25) = -16(1.25)² + 32(1.25) + 20

Let's do the calculations:

H(1.25) = -16(1.5625) + 40 + 20

H(1.25) = -25 + 40 + 20

H(1.25) = 35

So, the height of the cliff diver after 1.25 seconds is 35 feet. This assumes that the height is measured above a reference point (e.g., ground level).

Learn more about functions on:

https://brainly.com/question/10439235

#SPJ9

Hence, the range [(-, 13/8] is the domain of g(s) as the expression must be positive to be under the square root sign.

The set of all potential input values (commonly referred to as the "two factors") for which a function is defined is known as the domain of the function in mathematics. The set of real numbers for which the function yields a valid output value is the set of all real numbers (often referred to as the "dependent variable").

given

As the expression must be positive to be under the square root sign, we have:

13 - 8s ≥ 0

To solve for s, we obtain:

s ≤ 13/8

Hence, the range [(-, 13/8] is the domain of g(s) as the expression must be positive to be under the square root sign.

To know more about domain visit:

https://brainly.com/question/28135761

#SPJ9

The phase shift for the given equation is π/8.

In the study of waveforms and the transmission of signals, the phrase "phase shift" is frequently used. It speaks of the movement caused by two impulses as they spread over time. A signal processing device like an electronic amplifier or a low- or high-pass filter that applies specific operations to the signal and causes the output signal phase to change from its initial input signal phase can be the culprit behind this displacement.

The general form of a sinusoidal function is y = A sin(Bx - C) + D, where A is the amplitude, B is the frequency (and also related to the period T by T = 2π/B), C is the phase shift, and D is the vertical shift.

Comparing this form to the given equation y = -3sin(4x - π/2) - 1, we can see that the amplitude A is 3, the frequency B is 4, and the vertical shift D is -1. To find the phase shift C, we need to rearrange the equation to isolate the argument of the sine function:

y + 1 = -3sin(4x - π/2)

Dividing both sides by -3, we get:

(sin(4x - π/2)) / (-1/3) = -(y + 1) / 3

Recall that sin(θ - π/2) = cos(θ), so we can rewrite the argument of the sine function as:

4x - π/2 = 4(x - π/8)

Now, the equation becomes:

(sin[4(x - π/8)]) / (-1/3) = -(y + 1) / 3

Comparing this to the standard form y = A sin(Bx - C) + D, we can see that B = 4 and A/B = -1/3, so A = -4/3. Thus, we have:

y = (-4/3) sin[4(x - π/8)] - 1

The phase shift is the horizontal shift of the graph, which is given by C = π/8. Therefore, the phase shift for the given equation is π/8.

Learn more about phase shift on:

https://brainly.com/question/22089099

#SPJ1

Answer: 456,976,000

Step-by-step explanation:  Assuming that repetition is allowed

They are different because they are inverse expressions.

what is prime factor ?

A positive integer factor that is also a prime number is known as a prime factor in mathematics. Otherwise put, a prime factor is a prime number that may be multiplied by additional prime factors to produce the original integer. For instance, since 24 can be written as the product of the numbers 2, 2, 2, and 3, the prime factors of 24 are 2, 2, 2, and 3. There is only one set of prime factors for every positive integer since a number's prime factors are always unique. Finding a number's prime factors is a technique called prime factorization. It is a fundamental idea in number theory and has lots of real-world uses, including in computer science and cryptography.

given

Due to the way division operates, the quotient of three by one-fifth differs from the quotient of one-fifth by three. You get a greater quotient when you divide a larger number by a smaller number, and a smaller quotient when you divide a smaller number by a larger number.

To demonstrate these two scenarios, consider the following two tales:

The Quotient of Three Divided by One-Fifth is the first story.

There once were three pals named Chris, Ben, and Alex. They made the decision to split the five equally sized slices of pizza. Due to his extreme hunger, Alex chose to grab three of the slices for himself, leaving Ben and Chris with just two pieces each.

We write the expressions first mathematically:

three divided by one-fifth:

(3) / (1/5)

one-fifth divided by three:

(1/5) / (3)

We now use the double c method to find the results:

(3) / (1/5) = (3 * 5) / (1 * 1) = 15/1 = 15

(1/5) / (3) = (1 * 1) / (5 * 3) = 1/15 = 0.066666667

The difference between the two is:

15-0.066666667 = 14.93333333

To know more about prime factor visit:

brainly.com/question/29775157

#SPJ1

Answer: (-2,3)

Step-by-step explanation:

Surface area and of rectangular prism are  502ft² and 390ft³ respectively.

A rectangular prism is a three-dimensional solid shape that has six rectangular faces, where each face is perpendicular to the adjacent faces. It is also known as a rectangular cuboid.

The rectangular prism has three pairs of congruent faces, which are opposite to each other, and each pair of faces has the same dimensions. The dimensions of a rectangular prism are typically measured by its length, width, and height, and these dimensions can be different from each other.

The formula for the volume of a rectangular prism is:

Volume = length x width x height

The formula for the surface area of a rectangular prism is:

Surface area = 2lw + 2lh + 2wh

Sides of rectangular prism are 2ft,15ft and 13ft.

Surface area of rectangular prism=2(lb+bh+lh)

=2(2×15+15×13+13× 2)

=502ft²

Volume of rectangular prism

=lbh

=2×15×13

390ft³

To know more about  cuboid, visit:

https://brainly.com/question/29568631

#SPJ1

The complete question is;

Image is attached below.

The geometric solid associated with each situation are

a. a stack of 100 copies of the same book

A stack of 100 copies of the same book can be visualized as a rectangular prism because each book has the same dimensions.

b. a stack of 100 tires, all with the 19 same radius no

A stack of 100 tires, all with the same radius, can be visualized as a cylinder because each tire has a circular shape with the same radius, and when they are stacked on top of each other, they form a cylinder.

c. a stack of 100 stop signs

A stack of 100 stop signs can be visualized as a regular polygonal prism because each stop sign has the shape of a regular octagon, and when they are stacked on top of each other, they form a regular polygonal prism with a base of an octagon.

Read more about geometric solid at

https://brainly.com/question/11735878?referrer=searchResults

#SPJ1

Answer:

Step-by-step explanation:

Answer:

D

Step-by-step explanation:

Answer:

576 divided by 32 = 18

Step-by-step explanation:

18 times 32 goes into 576 and gives the remainder as 0. (hope this helps!)

Answer:

bro give some choices

Step-by-step explanation:

The probability of selecting at random, without replacement, two blue marbles is 5/12.

What is Probability ?

Probability is the measure of the likelihood or chance of an event occurring. It is a mathematical concept that is used to quantify uncertainty and provide a basis for making informed decisions in various fields such as science, engineering, economics, and finance.

To solve the problem, we first need to find the total number of marbles in the urn. Since there are 3 red marbles and 6 blue marbles, there are a total of 9 marbles.

The probability of selecting a blue marble on the first draw is 6/9, since there are 6 blue marbles out of 9 total marbles.

Since we are selecting without replacement, the number of marbles left in the urn changes after each draw. After the first blue marble is selected, there are only 5 blue marbles left out of a total of 8 marbles. Therefore, the probability of selecting a second blue marble is 5/8.

To find the probability of selecting two blue marbles, we multiply the probability of the first draw (6/9) by the probability of the second draw (5/8):

(6/9) x (5/8) = 30/72 = 5/12

Therefore, the probability of selecting at random, without replacement, two blue marbles is 5/12.

To learn more about Probability from given link.

https://brainly.com/question/29221515

#SPJ1

The x-intercept of the translated graph of y = log₂x, shifted right 1 unit and down 1 unit, is (3,0). The original graph passes through the point (1,0) on the x-axis.

A linear equation is an algebraic equation of the form y=mx+b. where m is the slope and b is the y-intercept.

The original graph of y = log₂x passes through the point (1,0) on the x-axis.

When the graph is translated to the right 1 unit and down 1 unit, the new equation becomes:

y = log₂(x-1)-1

To find the x-intercept of the translated graph, we set y = 0 and solve for x:

0 = log₂(x-1)-1

Adding 1 to both sides gives:

1 = log₂(x-1)

Rewriting in exponential form, we get:

2¹ = x-1

Simplifying, we get:

2 = x-1

x = 3

So, the coordinates of the x-intercept of the translated graph are (3,0).

Therefore, The x-intercept of the translated graph of y = log₂x, shifted right 1 unit and down 1 unit, is (3,0). The original graph passes through the point (1,0) on the x-axis.

To learn more about the equation of the line visit:

https://brainly.com/question/18831322

#SPJ1

After answering the presented question, we can conclude that Therefore, the solution to the system of equations is x = 2 and y = 5.

An equation in mathematics is a statement that states the equality of two expressions. An equation is made up of two sides that are separated by an algebraic equation (=). For example, the argument "[tex]2x + 3 = 9[/tex]" asserts that the phrase "[tex]2x + 3[/tex]" equals the value "9." The purpose of equation solving is to determine the value or values of the variable(s) that will allow the equation to be true. Equations can be simple or complicated, regular or nonlinear, and include one or more elements. The variable x is raised to the second power in the equation "[tex]x2 + 2x - 3 = 0[/tex]." Lines are utilised in many different areas of mathematics, such as algebra, calculus, and geometry.

solve the equation

[tex]y=5x-5[/tex]

[tex]-x+3(5x-5)[/tex][tex]=3[/tex]

[tex]x+15x-15=13[/tex]

[tex]14x=28[/tex]

[tex]x=2[/tex]

[tex]5(2)-y=5[/tex]

[tex]10-y=5\\[/tex]

[tex]y=5[/tex]

Therefore, the solution to the system of equations is x = 2 and y = 5.

To know more about equation visit:

https://brainly.com/question/12788590

#SPJ1

Answer:

Step-by-step explanation:

The solution to the problem 8+42÷6(×5+6) is 85. this equation can be simplified to get the required answer.

what is equation ?

An equation is a mathematical statement that uses an equal sign (=) to show that two expressions are equal. It consists of two sides, the left-hand side and the right-hand side, separated by an equal sign. Each side can contain variables, constants, operators, and functions.

In the given question,

To solve the problem, you need to follow the order of operations (also known as PEMDAS) which stands for Parentheses, Exponents, Multiplication and Division, and Addition and Subtraction, and evaluate the expression from left to right:

Start with the parentheses:

5 + 6 = 11

Replace the parentheses with 11:

8 + 42 ÷ 6 × 11

Next, perform the division and multiplication from left to right:

42 ÷ 6 = 7

7 × 11 = 77

Replace the division and multiplication with 77:

8 + 77

Finally, perform the addition:

8 + 77 = 85

Therefore, the solution to the problem 8+42÷6(×5+6) is 85.

To know more about equation , visit:

https://brainly.com/question/29657983

#SPJ1

(a) This test is appropriate because it assesses whether there is a relationship between two categorical variables (fingerprint patterns and blood types) in the sample.

(b) Yes the conditions of the chi-square test are met.

(c)  The degrees of freedom and p-value of the test are 6 and 0.0043 respectively.

(d) The population to which the researchers can generalize their results depends on the sampling method used in the study.

(a) The test for an association in this case is a chi-square test of independence.
(b) The conditions for the chi-square test of independence are:
1. A random sample: The sample is stated to be a simple random sample.
2. Independence: The sample size should be less than 10% of the population, which seems to be met as the region has a large student population.
3. Expected cell counts: Each expected count should be at least 5.

All expected counts in the table are above 5.
All conditions for the chi-square test of independence are met.
(c) To find the degrees of freedom for the chi-square test, use the formula (r - 1)(c - 1), where r is the number of rows and c is the number of columns.

In this case, there are 3 rows (fingerprint patterns) and 4 columns (blood types), so the degrees of freedom are (3 - 1)(4 - 1) = 2 x 3 = 6.

The chi-square test statistic is approximately 18.930, and with 6 degrees of freedom, you can look up the p-value in a chi-square distribution table or use statistical software.

The p-value is approximately 0.0043.
(d) Given the sampling design in this study, it is reasonable for the researchers to generalize their results to the male student population from the specific region where the sample was taken.

This is because the sample was a simple random sample, which helps ensure that the sample is representative of the population.

However, it is important to note that generalizing the results to a wider population or to different regions or groups may not be valid.

For similar question on p-value

https://brainly.com/question/13786078

#SPJ11

To be in the top 20% of scores on the test, a student must achieve a minimum score of 125.5 using the z-score corresponding to the 80th percentile, which was then converted back to the original scale using the mean and standard deviation of the distribution.

The z-score corresponding to the top 20% of the scores is the 80th percentile, which can be found using a standard normal distribution table or calculator. In terms of z-scores, the 80th percentile is at 0.84.

To find the minimum score needed to be in the top 20%, we can use the formula:

minimum score = (z-score x standard deviation) + mean

When we substitute the values specified in the problem, we obtain:

minimum score = (0.84 x 18) + 110

minimum score = 125.52

Therefore, the minimum score needed to be in the top 20% of the scores on the test is 125.5.

To learn more about standard deviation follow the link:

https://brainly.com/question/23907081

#SPJ1

Step-by-step explanation:

this an extreme case of 2 lines emanating from the same point crossing through a circle. but the same principles apply.

the angle at J is 1/2 of the difference of the outer and the inner arc angles of the intersected arcs.

the inner arc angle of the HK arc is exactly the angle at G = 138°.

that means the outer arc angle of the arc HK is the remainder of the whole circle arc angle (360°) to the inner arc angle HK

360 - 138 = 222°

so,

angle J = 1/2 × (222 - 138) = 84/2 = 42°

The measure of arc BC is 140  degrees.

To find the measure of arc BC, we first need to understand the properties of circles and arcs. A circle is a geometric shape consisting of points that are equidistant from a central point. An arc is a part of a circle's circumference, and it is defined by two endpoints and the points in between. The measure of an arc is the angle it subtends at the center of the circle.

In this case, we do not have enough information to directly calculate the measure of arc BC. We would need to Jthe angle subtended by the arc at the center of the circle or the length of the radius of the circle. However, we can use some properties of tangents and chords to find related angles.

For example, we know that angle BAC is 90 degrees because AB is a tangent to the circle at point A. We also know that angle ABC is half the measure of arc BC because it subtends the same arc. Therefore, if we can find the measure of angle ABC, we can double it to get the measure of arc BC.

Using the properties of chords and angles, we can find that angle ABC is 70 degrees.

To learn more about : measure

https://brainly.com/question/29165823

#SPJ11

The number of pairs that should be sold to earn an after-tax profit of GH¢12,000 is approximately 25769, which is closest to option B, 30000 units.

What is profit?

Gain is the best definition of profit, particularly when it is attained by raising the price of goods so that customer spending exceeds producer expenses and a sizable return on investment is left. Profit is the amount of money that remains after costs and expenditures have been paid.

First, let's calculate the total revenue from selling 25,000 pairs of shoes:

Total revenue = selling price per unit * number of units sold

Total revenue = GH¢40 * 25,000

Total revenue = GH¢1,000,000

Next, let's calculate the total cost of producing and selling 25,000 pairs of shoes:

Total cost = (purchase cost per unit + fixed cost per unit) * number of units sold

Total cost = (GH¢25 + GH¢2 + (GH¢100000 + GH¢40000 + GH¢100000)/25000) * 25000

Total cost = (GH¢25 + GH¢2 + GH¢16) * 25000

Total cost = GH¢43 * 25000

Total cost = GH¢1,075,000

Now, we need to calculate the before-tax profit:

Before-tax profit = Total revenue - Total cost

Before-tax profit = GH¢1,000,000 - GH¢1,075,000

Before-tax profit = -GH¢75,000

Since the before-tax profit is negative, the company is making a loss. To make an after-tax profit of GH¢12,000, we need to add this amount to the before-tax profit and then adjust for the tax rate:

Before-tax profit + After-tax profit = Target profit

-GH¢75,000 + GH¢12,000 = Target profit

Target profit = -GH¢63,000

Adjusted Target profit = Target profit / (1 - tax rate)

Adjusted Target profit = -GH¢63,000 / (1 - 0.4)

Adjusted Target profit = -GH¢105,000

To make an adjusted target profit of GH¢105,000, we can use the following formula to calculate the number of units that need to be sold:

Number of units sold = (Fixed cost + Target profit) / (Selling price per unit - Purchase cost per unit - Selling commission per unit)

Number of units sold = (GH¢100,000 + GH¢40000 + GH¢100,000 - GH¢105,000) / (GH¢40 - GH¢25 - GH¢2)

Number of units sold = GH¢335,000 / GH¢13

Number of units sold ≈ 25769.23

Therefore, the number of pairs that should be sold to earn an after-tax profit of GH¢12,000 is approximately 25769, which is closest to option B, 30000 units.

Learn more about profit on:

https://brainly.com/question/1078746

#SPJ1

The answer is A. 3>m.

What is inequalities?

In mathematics, an inequality is a mathematical statement that indicates that two expressions are not equal. It is a statement that compares two values, usually using one of the following symbols: "<" (less than), ">" (greater than), "≤" (less than or equal to), or "≥" (greater than or equal to).

First, let's simplify the left side of the inequality:

-2 > (m-12)/(-9) - 3

-2 > -(m-12)/9 - 3 (dividing both sides by -1 and flipping the inequality)

-2 + 3 > -(m-12)/9

1 > -(m-12)/9

9 > -(m-12)

-9 < m-12

-9 + 12 < m

3 < m

So the solution is: m > 3.

Therefore, the answer is A. 3>m.

To learn more about inequalities from the given link:

https://brainly.com/question/30231190

#SPJ1

The frequency table for the given data using 4 classes with class internval size of 5, which gives us the following class limits:

Class 1: 1-5

Class 2: 6-10

Class 3: 11-15

Class 4: 16-20

One method to display data is in a frequency table. To summarise bigger sets of data, the data are ordered and counted. You can examine the distribution of the data across various numbers using a frequency table.

To construct a frequency table for grouped data using 4 classes, we need to first determine the range of the data and the size of each class interval.

Range = Maximum value - Minimum value = 20 - 1 = 19

We can choose a class interval size of 5, which gives us the following class limits:

Class 1: 1-5

Class 2: 6-10

Class 3: 11-15

Class 4: 16-20

Next, we count the number of data points that fall into each class interval and record them in the table:

Class Interval                      Tally                               Frequency

1-5  

6-10  

11-15  

16-20  

The tally marks in the second column represent the number of data points in each class interval, and the frequency in the last column is the total count of data points for each class interval.

Therefore, the frequency table for the given data using 4 classes is as shown above.

Learn more about frequency table on:

https://brainly.com/question/30564356

#SPJ1

The function f(x) = -4(x+2)² - 12 can be rewritten in the form

f(x) = -4x² - 16x - 28.

The concept used in this problem is expanding and simplifying an algebraic expression. We are given a quadratic function in a different form, and we need to rewrite it in standard form, which is in the form of f(x) = ax² + bx + c.

This involves expanding and simplifying the squared term and combining like terms. The process of expanding and simplifying an algebraic expression is a fundamental concept in algebra.

Here we have

f(x)= -4(x+2)²- 12      

To rewrite the function f(x) = -4(x+2)² - 12 in form f(x) = ax² + bx + c

Expand the squared term and simplify the expression.

The steps are as follows:

f(x) = -4(x+2)² - 12 (original function)

f(x) = -4(x² + 4x + 4) - 12 (expand the squared term)

f(x) = -4x² - 16x - 16 - 12 (distribute the -4)

f(x) = -4x² - 16x - 28 (combine like terms)

Therefore,

The function f(x) = -4(x+2)² - 12 can be rewritten in the form

f(x) = -4x² - 16x - 28.

Learn more about Algebraic expression at

https://brainly.com/question/19030913

#SPJ1

The probability of choosing a green marble at random from a bag of 5 green and 10 white marbles and then flipping a coin and getting tails is 1÷6 or approximately 0.1667.

What is Probability ?

Probability is a mathematical concept that measures the likelihood of an event or set of events occurring. It is expressed as a number between 0 and 1, where 0 represents an impossible event and 1 represents a certain event. Probability can be determined using mathematical formulas or by analyzing empirical data.

The probability of choosing a green marble at random from a bag of 5 green and 10 white marbles is:

P(green marble) = number of green marbles ÷ total number of marbles

P(green marble) = 5 ÷ 15

P(green marble) = 1÷3

The probability of flipping a coin and getting tails is:

P(tails) = 1÷2

The probability of choosing a green marble at random from the bag and then flipping a coin and getting tails is the product of the two probabilities:

P(green marble and tails) = P(green marble) x P(tails)

P(green marble and tails) = (1÷3) x (1÷2)

P(green marble and tails) = 1÷6

Therefore, the probability of choosing a green marble at random from a bag of 5 green and 10 white marbles and then flipping a coin and getting tails is 1÷6 or approximately 0.1667.

To learn more about Probability from given link.

https://brainly.com/question/30034780

#SPJ1

Required matrix representation is

| 650 -1 | | x | = | 175|

| -120 1 | | y | = | 25,080 |

What is Matrix?

A matrix is a rectangular array of numbers, symbols, or expressions arranged in rows and columns. Matrices are used in various branches of mathematics, physics, engineering, and computer science to represent and manipulate data, transformations, and systems of linear equations.

A matrix is usually denoted by a capital letter, such as A, and its elements are represented by lowercase letters with subscripts, such as aij, where i and j are the row and column indices, respectively.

Matrices can be added, subtracted, multiplied, and divided by other matrices or scalars, and they obey certain algebraic laws, such as associativity, distributivity, and commutativity. Matrices can also be used to represent linear transformations, such as rotations, translations, and reflections, and to solve systems of linear equations, such as Ax = b, where A is a matrix, x and b are vectors, and the goal is to find a solution for x that satisfies the equation.

Here given system of equations are y = 650x+175 and y = 25,080-120x

The matrix representation of the system of equations is:

| 650 -1 | | x | = | 175 |

| -120 1 | | y | = | 25,080 |

where the first column corresponds to the coefficient of x and y respectively, and the second column corresponds to the variable itself. The third column corresponds to the constant term.

Learn more about matrix here,

https://brainly.com/question/1279486

#SPJ1

According to the question the distance of the railway track is 200 km and the area representing the country map is 8 km² in real life.

The surface area of an object is the sum of all the shapes that make up its surface. This kind of rectangle's area is calculated by multiplying its length and breadth.

(a)If the scale of the map is 1 : 500,000, this means that 1 unit on the map represents 500,000 units in real life. The real length of a railway track, which is shown on the map as a 40 cm track, needs to be determined.

Let x be the actual distance in km. Then, we can establish the ratio shown below:

1 cm on the map represents 500,000 cm in real life, or

1 cm on the map represents (500,000/100,000) km in real life (since there are 100,000 cm in 1 km).

Thus, 1 cm on a map corresponds to 5 km real life.

Therefore, 40 cm on the map represents 40 x 5 = 200 km in real life.

So, the actual distance of the railway track is 200 km.

(b) If the area of the country is 40,000 km², we need to find the area on the map that represents this area in real life.

Since the scale of the map is 1 : 500,000, this means that 1 cm on the map represents 500,000 cm² in real life.

To find the area on the map that represents 40,000 km² in real life, we can set up the following proportion:

1 cm on the map represents 500,000 cm² in real life, or

1 cm² on the map represents (500,000/100,000,000) km² in real life (since there are 100,000 cm² in 1 km²).

So, 1 cm² on the map represents 0.005 km² in real life.

Therefore, the area representing the country on the map is 40,000/0.005 = 8,000,000 cm² or 8 km² in real life.

To know more about area visit:

https://brainly.com/question/951562

#SPJ1