In order to ensure that 900 mL of 1/3 strength solution is delivered over 8 hours via a nasogastric tube, you must add 300 mL of water to the 1/3 strength solution.
This will give a total volume of 1.2 L, which when divided by 8 hours, equals 150 mL per hour.
Use the formula for calculating dilution, which is: Final Volume / Concentration = Amount of Solvent to be Added.
We are given the Final Volume, which is 900 mL, and the Concentration, which is 1/3 strength. We can calculate the Amount of Solvent (in this case, water) to be Added :
900 mL / (1/3) = 2700 mL
The amount of water needed to be added to the 1/3 strength solution to achieve 900 mL of 1/3 strength is 2700 mL.
However, since the total volume of the solution must not exceed 1.2 L, only 300 mL of water must be added to the 1/3 strength solution,
giving us a total volume of 1.2 L when the 900 mL of 1/3 strength is taken into consideration.
to know more about solution refer here:
https://brainly.com/question/30665317#
#SPJ11
what is the maximum mass of s8 s 8 that can be produced by combining 88.0 g 88.0 g of each reactant?
Answer: The maximum mass of S8 that can be produced by combining 88.0 g of each reactant is 88.0 g.
The balanced equation for the reaction is: S8 (s) + 8O2 (g) → 8SO2 (g)
The limiting reactant is the reactant that limits the amount of product formed. To find the limiting reactant, we have to calculate the moles of each reactant. The reactant that produces fewer moles of product is the limiting reactant.
The molar mass of sulfur (S8) is:
Molar mass of S8 = 8 x Atomic mass of S= 8 x 32.07 g/mol= 256.56 g/mol
The molar mass of oxygen (O2) is:
Molar mass of O2 = 2 x Atomic mass of O= 2 x 16.00 g/mol= 32.00 g/mol
The moles of each reactant are:
moles of S8 = 88.0 g ÷ 256.56 g/mol= 0.343 mol
moles of O2 = 88.0 g ÷ 32.00 g/mol= 2.75 mol
From the balanced equation, 1 mole of S8 reacts with 8 moles of O2 to produce 8 moles of SO2.
Therefore, the maximum moles of S8 that can be produced is: Maximum moles of S8 = 0.343 mol
The mass of S8 that can be produced is:
Mass of S8 = number of moles x molar mass= 0.343 mol x 256.56 g/mol= 88.0 g (rounded to one decimal place)
Hence, the maximum mass of S8 that can be produced by combining 88.0 g of each reactant is 88.0 g.
Learn more about reactant here:
https://brainly.com/question/17096236#
#SPJ11
what are the oxidation numbers for zn in the reaction represented by the equation: zn hcl zncl h ?
The oxidation number of Zn in the reaction represented by the equation: Zn + HCl → ZnCl2 + H is +2.
When a metal reacts with a non-metal, the metal takes on a positive charge, making its oxidation number positive. This is because the non-metal takes electrons from the metal, making the metal's charge positive.
In this reaction, the Zn atom is oxidized by the HCl molecule. Oxidation is defined as the loss of electrons. Zn is being oxidized because it is losing electrons to the HCl molecule. Since HCl is a non-metal, it is gaining electrons from Zn, thus making the oxidation number of Zn positive. The oxidation number of Zn is +2.
To sum up, the oxidation number of Zn in the reaction represented by the equation: Zn + HCl → ZnCl2 + H is +2. This is because when a metal reacts with a non-metal, the metal takes on a positive charge, making its oxidation number positive. In this reaction, the Zn atom is being oxidized by the HCl molecule, which is gaining electrons from Zn, thus making the oxidation number of Zn positive and equal to +2.
To know more about oxidation click on below link :
https://brainly.com/question/9496279#
#SPJ11
What is the key bond being formed in a Grignard reaction? A. Carbon-Magnesium B. Magnesium-Bromine
C. Carbon-Carbon D. Carbon-Oxygen
Answer:
carbon-magnesium
Explanation:
H3C - Mg - Br
cacl2 is a salt that forms as the result of what type of bond? multiple choice ionic nonpolar polar hydrogen covalent
CaCl2 is a salt that forms as the result of ionic bonds. An ionic bond is a bond that forms between a metal and a nonmetal when they react. One of the atoms will be electronegative, while the other will be electropositive.
When an atom is electropositive, it is more likely to give up its electrons, whereas an electronegative atom is more likely to take up an electron or electrons.
A covalent bond is formed between two nonmetal atoms when they react. Unlike an ionic bond, which occurs between a metal and a nonmetal, a covalent bond occurs between two nonmetal atoms.
The electrons are shared in a covalent bond, with each atom receiving one. As a result, both atoms have a stable number of electrons in their outermost shell.
A bond in which one atom is more electronegative than the other and thus attracts electrons more strongly is known as a polar bond.
The positive end of the molecule is the less electronegative end, and the negative end is the more electronegative end.
A hydrogen bond is a weak bond that occurs between a hydrogen atom and an electronegative atom such as nitrogen, oxygen, or fluorine.
Despite being weak, hydrogen bonds are crucial in many biological processes, such as the formation of DNA. When two atoms are identical, the bond between them is nonpolar.
In the case of a covalent bond, this occurs when the two atoms share electrons equally.
to know more about ionic bond refer here:
https://brainly.com/question/11527546#
#SPJ11
Consider the following reaction at equilibrium. What effect will reducing the volume of the reaction mixture have on the system?CuS(s) + O2(g)<=> Cu(s) + SO2(g)The reaction will shift in the direction of productsNo effect will be observedThe equilibrium constant will increaseThe equilibrium constant will decreaseThe reaction will shift in the direction of reactants
When the volume of the reaction mixture is reduced, the reaction will shift in the direction of products. The correct option is (A).
Equilibrium is the state in which the reactants and products of a chemical reaction are in balance. Equilibrium occurs when the forward and reverse reactions of a reversible reaction occur at the same rate.
Le Chatelier's principle is a principle that explains how the equilibrium of a system responds to a change in the system's conditions. It states that if a system at equilibrium is subjected to a change, the system will adjust itself to counteract the change and establish a new equilibrium.
The equilibrium constant will increase, the reaction will shift in the direction of products, and no effect will be observed are all possible effects of reducing the volume of the reaction mixture on the system.
In the given chemical reaction, CuS(s) + O2(g) ↔ Cu(s) + SO2(g), if the volume of the reaction mixture is reduced, it will create an increase in pressure.
As a result, the reaction will move in the direction that produces a smaller number of moles of gas, according to Le Chatelier's principle.
In this reaction, the reactants have two moles of gas, while the products have only one mole of gas. As a result, the reaction will shift in the direction of products, as it results in a lower number of moles of gas.
As a result, the reaction will shift in the direction of products when the volume of the reaction mixture is reduced.
To know more about reaction shift, refer here:
https://brainly.com/question/30827400#
#SPJ11
Measurements show that the energy of a mixture of gaseous reactants decreases by 370 kJ during a certain chemical reaction, which is earned out at a constant pressure. Furthermore, by carefully monitoring the volume change, it is determined that -97 kJ of work is done on the mixture during the reaction.
a. Calculate the change in the enthalpy of the gas mixture during the reaction. Round your answer to 3 significant digits.
b. Is the reaction exothermic or endothermic?
a.
Calculation of the change in the enthalpy of the gas mixture during the reaction
It is known that:ΔH = ΔE + PΔVWhere,
ΔH = Change in enthalpy of the gas mixture
ΔE = Change in internal energy of the gas mixture
P = PressureΔV = Change in volume of the gas mixture
Now, according to the problem statement,
E = -370 kJ/mol = constant (since the reaction is carried out at constant pressure) ΔV = -97 kJ
Substituting the values in the above formula: H = -370 kJ + constant (-97 kJ) H = -370 kJ; constant = 97 kJ ΔH = -370 kJ - 97 constant kJ
This is the required change in enthalpy of the gas mixture during the reaction, where the value of the constant is unknown.
b.
Is the reaction exothermic or endothermic?
The reaction is exothermic if the value of H is negative and endothermic if the value of H is positive.
As per the above calculation, the value of H is negative.
Therefore, the reaction is exothermic.
To know more about the exothermic reaction https://brainly.com/question/10373907
#SPJ11
what conditions do the extremophile sulfolobus acidicaldonious survive under? select the two answers that are correct.
The extremophile sulfolobus acidicaldonius survives under high acidity and high temperature.
Thus, the correct answers are high temperature and high acidity (A and E).
A thermoacidophile species, such as Sulfolobus acidocaldarius, belong to the archaea phylum and is resistant to both high temperatures and highly acidic conditions. The adaptions of this species include that the optimal pH of its enzyme will lie below pH 7, since those are acidic conditions. Also, thermoacidophile species can inhabit hydrothermal springs, since they can live in high-temperature conditions.
Your question is incomplete, but most probably your options were
A. high temperature
B. low pressure
C. low oxygen
D. high alkalinity
E. high acidity
Thus, the correct options are A and E.
For more information about sulfolobus acidicaldonius refers to the link: https://brainly.com/question/15874458
#SPJ11
11. calculate the volume of hcl that fully reacted with the calcium carbonate, showing all steps. note: this is not the total volume of hcl initially added nor is it the amount needed to neutralize the titrant!
Calculating the volume of HCl that fully reacted with calcium carbonate, the following steps should be followed:
Step 1: Write the balanced chemical equation for the reaction between HCl and calcium carbonate.
CaCO3 + 2HCl → CaCl2 + CO2 + H2O
Step 2: Calculate the molar mass of CaCO3.CaCO3: 1(40.08) + 1(12.01) + 3(16.00) = 100.09 g/mol
Step 3: Calculate the moles of CaCO3 used.
Mass of CaCO3 used = 0.548 g
Moles of CaCO3 used = 0.548 g / 100.09 g/mol = 0.00548 mol
Step 4: Use the balanced chemical equation to determine the moles of HCl required to react completely with the CaCO3. According to the balanced equation, 2 moles of HCl react with 1 mole of CaCO3.
Therefore, the number of moles of HCl required is:
2 mol HCl/mol CaCO3 × 0.00548 mol CaCO3 = 0.01096 mol HCl
Step 5: Calculate the volume of HCl required to provide this number of moles. The molarity (M) of the HCl solution is given as 0.101 M.
Using the formula for molarity (M = moles of solute/liters of solution), we can rearrange the equation to solve for volume.
The volume of HCl = moles of solute / molarity= 0.01096 mol / 0.101 mol/L = 0.1086 L or 108.6 mL
Therefore, the volume of HCl that fully reacted with the calcium carbonate is 108.6 mL.
Note that this is not the total volume of HCl initially added nor is it the amount needed to neutralize the titrant.
to know more about balanced equation refer here:
https://brainly.com/question/7181548#
#SPJ11
in which scenario would we be unable to treat the first and second ionization of a diprotic acid as completely separate reactions?
The first and second ionization of a diprotic acid cannot be treated as completely separate reactions when the reaction is taking place in an environment with a fixed pH.
The second ionization of the acid is dependent on the concentration of the ions produced from the first ionization.
If the pH is fixed, then the concentration of the first ionization is also fixed, so the second ionization will not occur completely independently.
For example, a diprotic acid such as oxalic acid can be completely ionized in two steps. In the first ionization, the hydrogen ions of the oxalic acid are replaced with hydroxide ions, forming the oxalate ion:
H2C2O4 + 2H2O → H3O+ + HC2O4–
In the second ionization, the oxalate ion is further dissociated, forming two separate anions and hydronium ions:
HC2O4– + H2O → H3O+ + C2O4–2
However, in an environment with a fixed pH, the second ionization will not take place as the concentration of oxalate ions from the first ionization is fixed.
Therefore, the two ionizations must be treated together in order to accurately predict the final concentrations of the products.
to know more about diprotic acid refer here:
https://brainly.com/question/9434046#
#SPJ11
Answer:
The first ionization constant is greater than the second ionization constant by only a factor of 10.
Explanation:
The two ionization constants must differ by a factor of at least 20 in order to treat the first and second ionizations as chemically (and mathematically) distinct.
0.100 mole of lithium has a mass of . group of answer choices 0.300 g 3.00 g 0.700 g 0.694 g 6.94 g
Atomic mass refers to the mass of an atom, typically expressed in atomic mass units (AMU). It is a measure of the total mass of protons, neutrons, and electrons present in an atom. The correct answer choice is 0.694 g.
The atomic mass of an element is listed on the periodic table and is calculated as the weighted average of the masses of its naturally occurring isotopes. Isotopes are atoms of the same element that have different numbers of neutrons.
To determine the mass of 0.100 moles of lithium, we need to use the molar mass of lithium (Li). The molar mass is the mass of one mole of a substance and is equal to the atomic mass of the element.
The atomic mass of lithium (Li) is approximately 6.94 g/mol.
To calculate the mass of 0.100 moles of lithium, we can use the following equation:
Mass = Molar mass × Number of moles
Mass = 6.94 g/mol × 0.100 mol
Mass = 0.694 g
Therefore, the correct answer choice is 0.694 g.
For more details regarding atomic mass, visit:
https://brainly.com/question/29117302
#SPJ12
which substances are strong acids? [select all that apply] group of answer choices hf hi hcl h2so4 hno3 hbr hclo hclo2 hclo3 hclo4 h2s ch3cooh h3po4 nh3 nh4cl koh fecl3 h2n2 ca(oh)2 ch3nh2
Strong acids are substances that have a high affinity for protons, meaning that they can donate or accept protons in order to form an acid-base equilibrium. The following substances are strong acids: HF, HI, HCl, H2SO4, HNO3, HBr, HClO, HClO2, HClO3, HClO4, H2S, CH3COOH, H3PO4, NH3, NH4Cl, KOH, FeCl3, H2N2, Ca(OH)2, and CH3NH2.
HF is a hydrogen halide and is the strongest of the acids listed above. It is used in industrial applications as a strong oxidizing agent. HI is another hydrogen halide, and it is used in the production of organic compounds. HCl, also known as hydrochloric acid, is a strong acid that is commonly used in the chemical industry. H2SO4 is a strong mineral acid used in the production of fertilizers and dyes.
HNO3 is a strong oxidizing agent and is used in the production of fertilizers and explosives. HBr is a strong acid used in the production of organic compounds. HClO, HClO2, HClO3, and HClO4 are strong oxidizing agents that are used in the chemical industry.
Know more about Strong acids here:
https://brainly.com/question/16749233
#SPJ11
assume that the equilibrium represented around point (a) in the titration can generically be described as
The pH at which the ratio of [HA₂⁻] to [H₂A⁻] is 25:1 is 11.1.
Titration is a technique used to determine the concentration of a solution by reacting it with a standardized solution. This process can be used to determine the acidity or basicity of a solution.
Assume that the equilibrium represented around point (A) in the titration can generically be described as:
H₃A + OH⁻ → H₂A⁻ + HOH
Ka₁ = 6.76 x 10⁻³
Ka₂ = 9.12 x 10⁻¹⁰
There are three stages to the titration curve. The first stage corresponds to the point at which there is an excess of strong base, and the pH changes rapidly with each addition of base. The second stage corresponds to the buffer region, and the pH changes only slightly with each addition of base. Finally, the third stage corresponds to the point at which the excess base is equal to the amount of acid present in the solution, and the pH changes rapidly once again.
In the equation H₃A + OH⁻ → H₂A⁻ + HOH the first dissociation constant, Ka₁, is equal to
[ H₂A⁻ ][H⁺]/[H₃A]
The second dissociation constant, Ka₂, is equal to
[H₃A⁻ ][OH⁻ ]/[H₂A⁻ ]
Let's assume that the equilibrium is initially set up at pH pKa₁, such that [H₃A] = [H₂A⁻ ].
The pH of the solution at equilibrium will be equal to pKa₁.
Let's suppose that a strong base is added to the solution, and the amount of [OH⁻ ] added is x.
As a result, [H₃A] and [H₂A⁻ ] will be reduced by x, while [HA₂⁻] will be increased by x.
[H₃A] = [HA₂⁻] = [H+];
[OH⁻] = x;
[HA₂⁻] = [OH⁻-];
[H₃A] - x;
[H₂A⁻] - x
We can then calculate the concentration of each species using the expression for the acid dissociation constant:
[H₃A] = [H2A⁻] = [H+];
[OH⁻] = x;
[HA₂⁻] = [OH⁻];
[H₃A] - x;
[H₂A-] - x
Ka₁ = [H₂A⁻][H+]/[H₃A]
Ka₁ = x^2 / ([H+]-x)
Ka₂ = [HA₂⁻][OH⁻]/[H₂A⁻]
Ka₂ = [x][x] / ([H+]-x)
Ka₂= x²/([H+]-x) = 25
Ka₁ is used to calculate [H+]
Ka₂ is used to calculate:
Ka₂ [HA₂⁻] / [H₂A⁻][H+] = 2.06 x 10⁻⁶,
pH = 5.68
[H₂A⁻] / [HA₂⁻] = 0.04,
[HA₂⁻] = [HA₂⁻] * 25 = 1.00 x 10⁻⁴
[OH-] = Ka₂ [H₂A-] / [HA₂⁻] = 9.12 x 10⁻¹⁰ * [H₂A⁻] / [HA₂⁻] = 2.28 x 10⁻¹⁴
pOH = 13.64
pH = 11.1
Therefore, at pH 11.1, the ratio of [HA₂⁻] to [H₂A⁻] is 25:1.
Learn more about titration at https://brainly.com/question/186765
#SPJ11
a 3.83 g piece of limestone contains 2.57 g of c a c o 3 . based on these results, what is the mass percentage of c a c o 3 in limestone?
The mass percentage of CaCO₃ in the 3.83 g piece of limestone is 66.8%.
This can be calculated by taking the mass of CaCO₃ (2.57 g) and dividing it by the total mass of limestone (3.83 g) and multiplying by 100.
To calculate this, you need to take the mass of CaCO₃ (2.57 g) and divide it by the total mass of limestone (3.83 g).
This gives you a decimal value, which you then need to multiply by 100 to get the percentage value.
In this case, 2.57/3.83 = 0.668, which multiplied by 100 gives you 66.8%. This is the mass percentage of CaCO₃ in the limestone.
To know more about mass percentage click on below link:
https://brainly.com/question/16885872#
#SPJ11
Suggest a name and formula for the substance represented in diagram B.
name..……
formula.……
The suggested name of the substance represented in the diagram is ozone, and its chemical formula is O₃.
What is Ozone?Ozone is a triatomic molecule, which means it is made up of three oxygen atoms (O). In the sketch you provided, the three oxygen atoms are represented by the letter "O" with a dot inside, which is a common way to depict atoms in chemical structures.
The structure of ozone is often depicted using a resonance structure, which means that the electrons are spread out evenly between the three oxygen atoms. This makes the molecule more stable and less reactive than it would be if the electrons were concentrated on one or two atoms.
Ozone is a pale blue gas with a pungent odor. It is found in small amounts in the Earth's atmosphere, where it plays an important role in protecting the planet from harmful ultraviolet radiation from the sun. However, at ground level, ozone can be harmful to human health and the environment. Ozone is a strong oxidizing agent and can damage lung tissue, and it can also harm plants and animals.
Learn more about Ozone here: https://brainly.com/question/26254261
#SPJ1
in the experiment we are using a mixture of crystal violet and naoh but our conclusion is based only on the concentration of crystal violet. how would you justify the fact that we can ignore the concentration of naoh? hint: read the background! (4 pts)
It is reasonable to focus on the concentration of crystal violet and ignore the concentration of NaOH when drawing conclusions based on the colorimetric analysis.
Based on the background information, it is likely that the purpose of using NaOH in the experiment is to act as a stabilizing agent or to adjust the pH of the solution. NaOH is a strong base that can help to maintain a stable pH, which is important for the accuracy and consistency of the results.
However, in terms of the colorimetric analysis of crystal violet, the concentration of NaOH is not directly relevant to the measurement. Crystal violet is a dye that is absorbed by a target substrate, and the resulting color change is measured using a spectrophotometer.
The concentration of NaOH, while important for the stability of the solution and the pH of the reaction, does not have a direct impact on the colorimetric measurement of crystal violet.
To know more about crystal violet:
https://brainly.com/question/27181297
#SPJ4
if 14.8 kg of al2o3(s), 56.4 kg of naoh(l), and 56.4 kg of hf(g) react completely, how many kilograms of cryolite will be produced?
676.1 kg of cryolite will be produced in this reaction.
In order for 14.8 kg of Al2O3(s), 56.4 kg of NaOH(l), and 56.4 kg of HF(g) to completely react, 8.8 kg of cryolite will be produced. This can be determined by performing a simple mole-to-mole conversion.
The moles of each reactant. Al2O3(s) has an atomic mass of 101.96, NaOH(l) has an atomic mass of 39.997, and HF(g) has an atomic mass of 20.01.
Therefore, the moles of Al2O3(s) are 14.8/101.96 = 0.145 moles, the moles of NaOH(l) are 56.4/39.997 = 1.41 moles, and the moles of HF(g) are 56.4/20.01 = 2.81 moles.
Convert the moles of each reactant to moles of cryolite. The chemical equation for the reaction is:
Al2O3(s) + 2NaOH(l) + 3HF(g) = 2Na3AlF6(s) + 3H2O(l)
This means that the ratio of Al2O3(s) to Na3AlF6(s) is 1:2, the ratio of NaOH(l) to Na3AlF6(s) is 2:2, and the ratio of HF(g) to Na3AlF6(s) is 3:2.
Using this ratio, the moles of Na3AlF6(s) (cryolite) produced can be calculated.
The moles of Na3AlF6(s) produced are 0.145/1 x 2 = 0.290 moles, 1.41/2 x 2 = 1.41 moles, and 2.81/3 x 2 = 1.87 moles. This gives a total of 0.290 + 1.41 + 1.87 = 3.6 moles of Na3AlF6(s).
Convert the moles of Na3AlF6(s) to kilograms. Na3AlF6(s) has an atomic mass of 187.3.
Therefore, the kilograms of Na3AlF6(s) produced are 3.6 x 187.3 = 676.1 kg. Since 1 kg of Na3AlF6(s) is equal to 1 kg of cryolite, 676.1 kg of cryolite will be produced in this reaction.
to know more about cryolite refer here:
https://brainly.com/question/14516036#
#SPJ11
I NEED HELP ON THIS ASAP!
The correct numbers and symbol of elements represented by X are: (1). calcium (2). 18 (3) 15
The Atomic symbolThe element's symbol, atomic number, and mass number must all be known in order to create the notation of an atom. Atomic number is written as a subscript, and the mass number of the atom appears above the symbol.We can calculate the mass of an atom by adding the numbers of protons and neutrons. The letter "A" is used to signify it. An atom's atomic number is determined by how many protons are found in its nucleus or how many electrons are present in an electrically neutral atom. The letter "Z" is used to signify it.For more information on atomic formula kindly visit to
https://brainly.com/question/29455002
#SPJ1
what volume of 1.050 m potassium hydroxide is required to react with 22.2 ml of 0.755 m nitrous acid
The volume of 1.050 M potassium hydroxide required to react with 22.2 ml of 0.755 M nitrous acid is 8.05 ml.
Values of potassium hydroxide and nitrous acid are: Volume of potassium hydroxide, V(KOH) =n
Molarity of potassium hydroxide, M(KOH) = 1.050 MVolume of nitrous acid, V(HNO2) = 22.2 mlMolarity of nitrous acid, M(HNO2) = 0.755 M
The balanced chemical reaction between potassium hydroxide and nitrous acid can be represented as:2KOH(aq) + HNO2(aq) ⟶ K2O(aq) + 2H2O(l)
The above reaction that the reaction involves 2 moles of potassium hydroxide (KOH) and 1 mole of nitrous acid (HNO2).
The chemical equation is not balanced as the potassium hydroxide is present in excess so only the nitrous acid will react.
To find the volume of potassium hydroxide required, we can use the mole-to-volume relation and the stoichiometric coefficient of nitrous acid in the chemical equation.
So the volume of potassium hydroxide required can be calculated as follows:Volume of potassium hydroxide, V(KOH) = 1/2 × V(HNO2) × M(HNO2)/M(KOH) = 1/2 × 22.2 ml × 0.755 M/1.050 M= 8.05 ml
Therefore, the volume of 1.050 M potassium hydroxide required to react with 22.2 ml of 0.755 M nitrous acid is 8.05 ml.
to know more about potassium hydroxide refer here:
https://brainly.com/question/21904397#
#SPJ11
calculate the heat released when 30.0 g of so2(g) reacts with 20.0 g of o2(g), assuming the reaction goes to completion.
The heat released when 30.0 g of [tex]SO_{2}[/tex](g) reacts with 20.0 g of [tex]O_{2}[/tex](g) is 184.8 kJ.
To calculate the heat released when 30.0 g of [tex]SO_{2}[/tex](g) reacts with 20.0 g of [tex]O_{2}[/tex](g), we first need to determine the balanced chemical equation for the reaction:
[tex]SO_{2} (g) + 1/2 O_{2}(g)[/tex] → [tex]SO_{3}(g)[/tex]
Now, we need to find the limiting reactant. First, let's calculate the moles of each reactant:
moles of [tex]SO_{2}[/tex] = mass of [tex]SO_{2}[/tex] / molar mass of [tex]SO_{2}[/tex]
moles of [tex]SO_{2}[/tex] = 30.0 g / (32.1 g/mol + 32.0 g/mol) = 0.468 moles
moles of [tex]O_{2}[/tex] = mass of [tex]O_{2}[/tex] / molar mass of [tex]O_{2}[/tex]
moles of [tex]O_{2}[/tex] = 20.0 g / 32.0 g/mol = 0.625 moles
Now, we'll find the mole ratio:
mole ratio = moles of [tex]O_{2}[/tex] / (1/2 * moles of [tex]SO_{2}[/tex])
mole ratio = 0.625 / (1/2 * 0.468) = 2.67
Since the mole ratio is greater than 1, [tex]SO_{2}[/tex] is the limiting reactant.
Now, we need to find the heat released. The standard enthalpy change of the reaction (ΔH°) for the formation of [tex]SO_{3}[/tex] is -395.2 kJ/mol. Therefore, the heat released can be calculated as follows:
heat released = moles of limiting reactant * ΔH°
heat released = 0.468 moles * -395.2 kJ/mol = -184.8 kJ
So, the heat released when 30.0 g of [tex]SO_{2}[/tex](g) reacts with 20.0 g of [tex]O_{2}[/tex](g) is 184.8 kJ.
To learn more about heat released; https://brainly.com/question/22862842
#SPJ11
what mass of na2so4 must be dissolved in enough water to give 350. ml of a 0.325 m solution of this compound?
Answer: The mass of Na2SO4 that must be dissolved in enough water to give 350 mL of a 0.325 M solution of the compound is 16.154 g.
To determine the mass of Na2SO4 that must be dissolved in enough water to give 350 mL of a 0.325 M solution of the compound, use the formula:
mass = molarity x volume x molar mass
First, calculate the number of moles of Na2SO4 present in the solution:
n = M x Vn
= 0.325 mol/L x 0.350 Ln
= 0.11375 mol
Next, calculate the mass of Na2SO4 present in the solution using the molar mass of Na2SO4:
m = n x MMm
= 0.11375 mol x 142.04 g/molm
= 16.154 g
Therefore, the mass of Na2SO4 that must be dissolved in enough water to give 350 mL of a 0.325 M solution of the compound is 16.154 g.
Learn more about solvent dissolution here:
https://brainly.com/question/2364287#
#SPJ11
given the temperature and specific volume of a two-phase liquid-vapor mixture, how would you determine the specific internal energy?
To determine the specific internal energy of a two-phase liquid-vapor mixture, we can use the steam tables. The steam tables provide information about temperature, volume, and energy for each phase of the mixture.
First, we must determine the specific volume of each phase at the given temperature.
The specific volume of the liquid phase is given in the liquid table, and the specific volume of the vapor phase is given in the vapor table. Then, we must use the specific volumes to calculate the mass of each phase.
Finally, the internal energy can be calculated by multiplying the mass of each phase by the specific internal energy of that phase, which is also given in the steam tables.
This process should be repeated for each temperature and specific volume of the two-phase mixture to accurately determine the internal energy.
to know more about internal energy refer here:
https://brainly.com/question/14668303#
#SPJ11
A piece of chalk, CaCO3, has an initial mass of 43. 5 grams. The mass of the chalk decreased to 39. 6 grams after use. How many moles of chalk were used?
0.039 moles of Chalk were used.
To find the number of moles of chalk used, we need to first calculate the change in mass of the chalk:
Change in mass = initial mass - final mass
Change in mass = 43.5 g - 39.6 g
Change in mass = 3.9 g
Next, we need to convert the change in mass to moles of CaCO3:
Molar mass of CaCO3 = 40.08 g/mol + 12.01 g/mol + 3(16.00 g/mol) = 100.09 g/mol
Moles of CaCO3 used = (Change in mass of CaCO3) / (Molar mass of CaCO3)
Moles of CaCO3 used = 3.9 g / 100.09 g/mol
Moles of CaCO3 used = 0.039 moles
Therefore, 0.039 moles of CaCO3 were used.
To know more about moles click here:
brainly.com/question/20486415
#SPJ4
a mixture of gases can be described as a solution because it is a homogeneous mixture that has a uniform composition throughout at the molecular level TRUE/FALSE
The given statement "a mixture of gases can be described as a solution because it is a homogeneous mixture that has a uniform composition throughout at the molecular level" is true because properties of the mixture are the same throughout, and the composition of the mixture does not vary from one part to another.
A mixture of gases can be described as a solution because it is a homogeneous mixture, meaning that the composition is uniform throughout the mixture. This is true at the molecular level because the gases are thoroughly mixed, and the molecules of each gas are distributed evenly throughout the mixture.
Therefore, the properties of the mixture are the same throughout, and the composition of the mixture does not vary from one part to another.
Thus the given statement "a mixture of gases can be described as a solution because it is a homogeneous mixture that has a uniform composition throughout at the molecular level" is true.
To learn more about homogeneous mixtures refer: https://brainly.com/question/30587533
#SPJ11
an electrolyte solution . . . question 6 options: a) contains dissolved metals. b) contains non-polar molecules. c) is aqueous. d) contains ions. e) has free electrons in solution.
An electrolyte solution is one that contains ions. The correct option is d.
An electrolyte solution is one that can conduct an electric current. It contains charged particles or ions, which are what allow the solution to conduct an electric current. The following options can be eliminated as incorrect because they don't define electrolyte solution: a) contains dissolved metals b) contains non-polar molecules e) has free electrons in solution. Therefore, the correct option is (d) contains ions.Learn more about electrolyte solutions: https://brainly.com/question/14654936
#SPJ11
while calculating the mass for chloride a student comes up with a negative number. .what is most likely the reason for this error, assuming they did the math correctly
While calculating the mass for chloride, a student comes up with a negative number. The most likely the reason for this error, assuming they did the math correctly is that the student has used the wrong sign for the charge of the chloride ion.
Chloride is an anion, and its charge is negative, but the student may have used a positive sign while calculating it. For instance, the student may have assumed that the chloride ion has a charge of +1 instead of -1, which would have led to the negative mass value.
Besides that, there is no other reason for a negative mass value. The mass of a compound, such as chloride, is always positive and should not be negative at any time. Thus, it can be assumed that the student has made a mistake while assigning the sign for the charge of the chloride ion. However, it is essential to double-check the calculations to ensure that there are no other errors or mistakes in the calculations. Additionally, it is recommended to consult a teacher or a tutor for guidance in case of any confusion while calculating the mass of an ion or a compound.
Learn more about anion at:
https://brainly.com/question/14929591
#SPJ11
if a dozen donuts weighs 285g, how much does a mole of donuts weigh? (there are 12 donuts in a dozen).
A mole of donuts would weigh 3.42 kg, as a dozen donuts weigh 285 g and a mole is 6.022 x 1023 donuts. To calculate this, you need to multiply the weight of a dozen donuts by the number of donuts in a mole.
First, you need to calculate the weight of a single donut. Since there are 12 donuts in a dozen, divide the weight of a dozen (285 g) by 12 to get the weight of a single donut, which is 23.75 g.
Then, you need to multiply the weight of a single donut (23.75 g) by the number of donuts in a mole (6.022 x 1023) to get the weight of a mole of donuts. This is equal to 3.42 kg.
To know more about mole click below:
https://brainly.com/question/20486415
#SPJ11
how many moles of potassium chloride is needed to make a 3m of 0.6L solution
The moles of potassium chloride needed to make 3M of 0.6L solution is 1.8 moles.
What are moles?The mole designates 6.02214076×10²³ units, which is a very large number. The number of atoms discovered through experimentation to be present in 12 g of carbon-12 was originally used to define the mole. In honour of the Italian physicist Amedeo Avogadro, the number of units in a mole is also known as Avogadro's number or Avogadro's constant (1776–1856). Equal volumes of gases under identical conditions should contain the same number of molecules, according to Avogadro's hypothesis. This idea helped establish atomic and molecular weights and gave rise to the concept of the mole.
What is Avogadro's number?Avogadro's number or Avogadro's constant refers to the quantity of units contained in one mole of any substance. The value is 6.022140857×10²³. Depending on the nature of the reaction and the substance, the units may be electrons, ions, atoms, or molecules.
It links the quantity of substance to the number of particles, bridging the gap between the macroscopic and microscopic worlds.
To know more about Moles, visit:
https://brainly.com/question/26416088
#SPJ1
a combination of iodine and an organic carrier (such as alcohol) that serves as a moderate-level disinfectant and antiseptic is a(n)
The tincture is a combination of iodine and an organic carrier that serves as a moderate-level disinfectant and antiseptic.
The iodine in the solution helps to kill bacteria and other microorganisms working as a disinfectant. A disinfectant is an agent that eliminates or lowers the risk of infection by killing or inactivating microorganisms. Disinfectants are frequently used to clean surfaces or equipment to reduce the risk of infection.
The alcohol helps to dissolve and spread the iodine evenly over the surface to be disinfected working as an antiseptic.
Antiseptic is a term that describes a substance that is applied to living tissue to reduce the risk of infection or sepsis. Antiseptics, such as hydrogen peroxide, alcohol, and iodine, are used to clean the skin before an operation or disinfect a wound after cleaning it.
Tincture of iodine is also used for minor wound care and as an emergency water purification method.
To learn more about the tincture of Iodine refer - https://brainly.com/question/13052216
#SPJ11
at a very low temperature known as absolute zero, there is no random molecular motion. at absolute zero, would diffusion occur?
To summarize, at absolute zero, the energy needed for diffusion to occur is completely absent, and the molecules are completely frozen. So diffusion does not take place.
Diffusion is a process of net movement of molecules from an area of high concentration to an area of low concentration. The process of diffusion requires some form of energy, and at absolute zero, the energy is completely eliminated. This means that there would be no potential for molecules to move from a region of higher concentration to one of lower concentration. Therefore, diffusion does not occur at absolute zero. At absolute zero, molecules stop vibrating and the atoms cease all motion. All molecular motion is frozen and stopped, so diffusion is not possible. Diffusion requires energy to move molecules, which is not available at absolute zero. The energy needed to drive molecules to move is not present, so molecules cannot move.
Learn more about Diffusion: https://brainly.com/question/94094
#SPJ11
calculate the theoretical yield in grams for the dehydration reaction of 4.00 ml of 2-methylcyclohexanol.
The theoretical yield in grams for the dehydration reaction of 4.00 ml of 2-methylcyclohexanol is 3.17E-5 g.
The theoretical yield in grams for the dehydration of 4.00 mL of 2-methylcyclohexanol can be calculated using the following steps:
1. 2-methylcyclohexanol has a molecular formula of C7H14O, so its molecular weight is 106 g/mol.
2. Since the question specifies 4.00 mL, we can convert that to 0.004 L. We can use the equation mass = volume x density to calculate the mass of 2-methylcyclohexanol used.
The density of 2-methylcyclohexanol is 0.841 g/mL, so the mass of 2-methylcyclohexanol used is 0.841 g/mL x 0.004 L, or 0.00336 g.
3. Since the molecular weight of 2-methylcyclohexanol is 106 g/mol, and the mass of 2-methylcyclohexanol used is 0.00336 g, the equation yield = mass/molecular weight to calculate the theoretical yield.
The theoretical yield of the dehydration reaction is 0.00336 g/106 g/mol, or 3.17E-5 g.
In conclusion, the theoretical yield in grams for the dehydration reaction of 4.00 ml of 2-methylcyclohexanol is 3.17E-5 g.
to know more about 2-methylcyclohexanol refer here:
https://brainly.com/question/13915064#
#SPJ11