Once alchol is in the bloodstrram it will reach the brain I'm a few

Answer:

At a temperature of 300K, a gas has a volume of 3.0 L. If we double the temperature to 600K, the volume will increase to 6.0 L. However, the pressure will remain the same at 1 atm. Therefore, the new volume is 6.0 L x 1 atm = 6.0 L

Answer: calm water.

Explanation:

Answer:

53.69 mg/m³

Explanation:

To calculate the concentration of ethyl acetate in milligrams per cubic meter, we need to know the total volume of the room and the amount of ethyl acetate that evaporated in grams.

The total volume of the room is:

V = l x w x h

V = 9.00 m x 6.00 m x 3.00 m

V = 162.00 cubic meters

To convert the amount of ethyl acetate evaporated from grams to milligrams, we multiply by 1000:

amount of ethyl acetate = 8.701 g = 8,701 mg

Now we can calculate the concentration of ethyl acetate in milligrams per cubic meter:

concentration = amount of ethyl acetate / volume of room

concentration = 8,701 mg / 162.00 cubic meters

concentration = 53.69 mg/m³

Therefore, the concentration of ethyl acetate in the unventilated room is 53.69 mg/m³.

Based οn the wοrds prοvided, a pοssible title fοr this sectiοn οf Sheila's nοtes cοuld be Mass.

In chemistry, prοperties οf matter refer tο the characteristics οr attributes that can be used tο describe and identify a substance. These prοperties can be divided intο twο categοries: physical prοperties and chemical prοperties.

Physical attributes are thοse that can be examined οr measured withοut changing the substance's makeup. Mass, vοlume, density, cοlοr, melting pοint, bοiling temperature, and sοlubility are examples οf physical qualities.

Chemical prοperties, οn the οther hand, describe hοw a substance interacts with οther substances tο prοduce new substances.

Understanding the prοperties οf matter is impοrtant in chemistry because it allοws scientists tο identify and classify different substances based οn their unique characteristics. This knοwledge can alsο be used tο predict hοw substances will behave under different cοnditiοns and tο design new materials with specific prοperties fοr variοus applicatiοns.

To learn more about Density, visit:

https://brainly.com/question/26364788

#SPJ1

Complete question:

Sheila spilled tea on her notes and is now unable to read some words.

What is the correct title for this section of Sheila’s notes?

The volume of the gas will be 560 mL when the pressure is reduced to 125.0 kPa, assuming the temperature remains constant.

Boyle's law simply states that "the volume of any given quantity of gas is inversely proportional to its pressure as long as temperature remains constant.

Boyle's law is expressed as;

P₁V₁ = P₂V₂

Where P₁ is Initial Pressure, V₁ is Initial volume, P₂ is Final Pressure and V₂ is Final volume.

Substituting the given values, we get:

P₁ = 350.0 kPa (initial pressure)

V₁ = 200 mL (initial volume)

P₂ = 125.0 kPa (final pressure)

V₂ = ?

Solving for V₂, we get:

V₂ = ( P₁ × V₁ ) / P₂

V₂ = (350.0 kPa × 200 mL) / 125.0 kPa

V₂ = 560 mL

Therefore, the final volume of the gas is  560 mL.

Learn more about Boyle's law here: brainly.com/question/1437490

#SPJ1

Answer:

Explanation:

Limiting is HCl and excess is Ca(OH)2

excess is 296 grams Ca(OH)2

2 moles H2O will be formed

Answer:

25.3%

Explanation:

Since

Ca has just 1 mole

Ca ×1 = 40.08

C has 4 moles

C×4 = 48.04

H has 6 moles

H×6 = 6.06

O has 4 moles

O×4 = 64

64+6.06+48.04+40.08=158 (approx.)

40.08÷158 ×100% = 25.3%

Answer:

1. Atoms

Explanation:

The products and reactants of a chemical reaction are usually related in terms of their atoms and molecules. During a chemical reaction, atoms are rearranged to form new molecules, and these new molecules are the products of the reaction. However, the atoms themselves are not created or destroyed in the process.

For example, if we consider the combustion of methane (CH4) with oxygen (O2) to produce carbon dioxide (CO2) and water (H2O), the reactants (methane and oxygen) and the products (carbon dioxide and water) are all made up of the same types of atoms (carbon, hydrogen, and oxygen), but they are rearranged in different ways. The chemical properties of the reactants and products may differ, but they are still related in terms of their atomic and molecular composition.

It's difficult though to say which is more likely between atoms and molecules because they are both essential components of chemical reactions. In a chemical reaction, atoms combine to form molecules or break apart from molecules to form new molecules. Therefore, both atoms and molecules are important in a chemical reaction.

However, if we had to choose one that is more likely to be common between the reactants and products, it would probably be atoms. This is because in most chemical reactions, the atoms involved in the reactants are rearranged to form the products. The chemical reaction simply involves the rearrangement of the atoms, but the atoms themselves are not created or destroyed

On the other hand, molecules may change significantly during a chemical reaction, as they are made up of specific arrangements of atoms. The chemical properties of the reactants and products may also differ because of changes in the molecular structure. Therefore, while molecules are still an essential part of chemical reactions, it is more likely that atoms will be common between the reactants and products.

Answer:

1. The balanced equation is 2KCIO3 → 2KCI + 3O2. According to the law of conservation of mass, the mass of the reactants must equal the mass of the products. Therefore, the mass of oxygen produced is:

Mass of oxygen = Mass of KCIO3 - Mass of KCI

Mass of oxygen = 500 g - 303 g

Mass of oxygen = 197 g

Therefore, 197 g of O2 are produced.

2. The balanced equation is N2 + 3H2 → 2NH3. We need to find out how much H2 is needed to react with 100 g of N2 to produce 121 g of NH3. First, we need to calculate the number of moles of N2 and NH3:

Moles of N2 = Mass of N2 / Molar mass of N2

Moles of N2 = 100 g / 28 g/mol

Moles of N2 = 3.57 mol

Moles of NH3 = Mass of NH3 / Molar mass of NH3

Moles of NH3 = 121 g / 17 g/mol

Moles of NH3 = 7.12 mol

According to the balanced equation, 1 mole of N2 reacts with 3 moles of H2 to produce 2 moles of NH3. Therefore, the number of moles of H2 needed is:

Moles of H2 = Moles of N2 x (3/1)

Moles of H2 = 3.57 mol x 3

Moles of H2 = 10.71 mol

Finally, we can calculate the mass of H2 needed:

Mass of H2 = Moles of H2 x Molar mass of H2

Mass of H2 = 10.71 mol x 2 g/mol

Mass of H2 = 21.42 g

Therefore, 21.42 g of H2 are needed.

3. The balanced equation is 4Fe + 3O2 → 2Fe2O3. We need to find out how much oxygen is needed to react with 350 g of Fe to produce 500 g of Fe2O3. First, we need to calculate the number of moles of Fe and Fe2O3:

Moles of Fe = Mass of Fe / Molar mass of Fe

Moles of Fe = 350 g / 55.85 g/mol

Moles of Fe = 6.26 mol

Moles of Fe2O3 = Mass of Fe2O3 / Molar mass of Fe2O3

Moles of Fe2O3 = 500 g / 159.69 g/mol

Moles of Fe2O3 = 3.13 mol

According to the balanced equation, 4 moles of Fe react with 3 moles of O2 to produce 2 moles of Fe2O3. Therefore, the number of moles of O2 needed is:

Moles of O2 = Moles of Fe x (3/4)

Moles of O2 = 6.26 mol x (3/4)

Moles of O2 = 4.69 mol

Finally, we can calculate the mass of O2 needed:

Mass of O2 = Moles of O2 x Molar mass of O2

Mass of O2 = 4.69 mol x 32 g/mol

Mass of O2 = 150.08 g

Therefore, 150.08 g of O2 are needed.

4. The balanced equation is CH2 + 2O2 → CO2 + 2H2O. We know that 16 g of CH2 reacts with 64 g of O2 to produce 44 g of CO2. We need to find out how much water is produced. First, we need to calculate the number of moles of CH2 and CO2:

Moles of CH2 = Mass of CH2 / Molar mass of CH2

Moles of CH2 = 16 g / 14 g/mol

Moles of CH2 = 1.14 mol

Moles of CO2 = Mass of CO2 / Molar mass of CO2

Moles of CO2 = 44 g / 44 g/mol

Moles of CO2 = 1 mol

According to the balanced equation, 1 mole of CH2 reacts with 2 moles of O2 to produce 2 moles of H2O. Therefore, the number of moles of H2O produced is:

Moles of H2O = Moles of CH2 x (2/1)

Moles of H2O = 1.14 mol x 2

Moles of H2O = 2.28 mol

Finally, we can calculate the mass of H2O produced:

Mass of H2O = Moles of H2O x Molar mass of H2O

Mass of H2O = 2.28 mol x 18 g/mol

Mass of H2O = 41.04 g

Therefore, 41.04 g of H2O are produced.

5. The balanced equation is CaCO3 → CaO + CO2. We need to find out how much CO2 is produced from the decomposition of 200 g of CaCO3 if 112 g of CaO are produced. First, we need to calculate the number of moles of CaCO3 and CaO:

Moles of CaCO3 = Mass of CaCO3 / Molar mass of CaCO3

Moles of CaCO3 = 200 g / 100.09 g/mol

Moles of CaCO3 = 1.999 mol

Moles of CaO = Mass of CaO / Molar mass of CaO

Moles of CaO = 112 g / 56.08 g/mol

Moles of CaO = 1.999 mol

According to the balanced equation, 1 mole of CaCO3 produces 1 mole of CaO and 1 mole of CO2. Therefore, the number of moles of CO2 produced is:

Moles of CO2 = Moles of CaCO3 x (1/1)

Moles of CO2 = 1.999 mol

Finally, we can calculate the mass of CO2 produced:

Mass of CO2 = Moles of CO2 x Molar mass of CO2

Mass of CO2 = 1.999 mol x 44 g/mol

Mass of CO2 = 87.96 g

Therefore, 87.96 g of CO2 are produced.

Answer:

The nuclide formed by the β decay of 26Al is 26Mg.


Mark my answer as brainliest! this was a difficult one

Answer:  -204.48 celsius

Explanation:

Gay lussac law P1/T1 = P2/T2

T2 = T1P2/P1

I AM ASSUMING THAT 1.92 IS IN ATMS

Temperature must be in Kelvin

t2= 292.15 x 0.45/1.92 =68.47 K

68.47-273.15 = -204.48 celsius  it is a negative number

Answer:evaluations of seismic data

Explanation:

Answer: Solubility increases so more solute dissolves

Explanation:

The solubility is a measure of the concentration of the dissolved gas particles in the liquid and is a function of the gas pressure. As you increase the pressure of a gas, the collision frequency increases and thus the solubility goes up, as you decrease the pressure, the solubility goes down.

When 58.15 g of PCl5 reacts with water, 20.36 g mass of HCl will be produced. Rounded to the hundredths place, the answer is 20.36 g HCl.

What is the mass?

To solve this problem, we need to use the balanced chemical equation and stoichiometry. The balanced chemical equation is:

PCl5 (s) + H2O (l) → POCl3 (l) + 2HCl (aq)

From the equation, we can see that 1 mole of PCl5 reacts with 1 mole of H2O to produce 1 mole of POCl3 and 2 moles of HCl. We can use this information to calculate the moles of HCl produced from the given mass of PCl5.

First, we need to convert the mass of PCl5 to moles:

58.15 g PCl5 x (1 mol PCl5/208.24 g PCl5) = 0.2793 mol PCl5

Next, we can use the mole ratio from the balanced equation to calculate the moles of HCl produced:

0.2793 mol PCl5 x (2 mol HCl/1 mol PCl5) = 0.5586 mol HCl

Finally, we can convert the moles of HCl to grams using its molar mass:

0.5586 mol HCl x (36.46 g HCl/1 mol HCl) = 20.36 g HCl

Therefore, when 58.15 g of PCl5 reacts with water, 20.36 g of HCl will be produced. Rounded to the hundredths place, the answer is 20.36 g HCl.

To know more about mass, visit:

https://brainly.com/question/19694949

#SPJ1

Complete question is: When 58.15 g of phosphorus pentachloride reacts with water, 20.36 g mass of hydrogen chloride will be produced.

The Kp, for the decomposition reaction of ammonium carbamate, NH4OCONH2, is given as 4.01×10^-3 at 23.00 °C.The balanced chemical equation for the reaction is:

NH4OCONH2 (g) ⇌ NH3 (g) + CO2 (g)

The value of Kp indicates the ratio of the product of the partial pressures of the products to the product of the partial pressures of the reactants, with each pressure raised to a power equal to its stoichiometric coefficient in the balanced chemical equation. Mathematically, the expression for Kp is:

Kp = (P(NH3) * P(CO2)) / (P(NH4OCONH2))

where P is the partial pressure of each gas.

At equilibrium, the partial pressures of NH3, CO2, and NH4OCONH2 will be related by the Kp value. If the partial pressures of the products are known, the partial pressure of the reactant can be calculated using the Kp value. Conversely, if the partial pressure of the reactant is known, the partial pressures of the products can be calculated using the Kp value.

It is important to note that the value of Kp is temperature-dependent, and as such, the equilibrium composition of the reaction mixture will change with changes in temperature.

To know more about the decomposition, visit:

https://brainly.com/question/8009068

#SPJ1

(1) The larger ion is Cr³+

(2) The larger ion is Ca.

In the first pair, we are comparing the cations Cr²⁺ and Cr³⁺. Cations are positively charged ions that form when an atom loses one or more electrons. The charge on a cation tells you how many electrons it has lost. In this case, Cr²⁺ has lost 2 electrons, while Cr³⁺ has lost 3 electrons.

When comparing the sizes of ions, we need to consider the ionic radius. The ionic radius is the distance between the nucleus of an ion and its outermost electron shell.

As we move from left to right across the periodic table, the number of protons in the nucleus increases, which pulls the electrons closer to the nucleus and makes the atoms smaller. As we move down a column in the periodic table, the number of electron shells increases, which makes the atoms larger.

Learn more about size of ions here: https://brainly.com/question/14511468

#SPJ1

The reaction of 2-Bromo-2-Ethyl-3-Methylbutane with methanol is an example of a nucleophilic substitution reaction.

In this reaction, the methanol molecule acts as a nucleophile and attacks the carbon atom of the bromoalkane, resulting in the displacement of the leaving group (bromine) and the formation of a new carbon-oxygen (C-O) bond.

The reaction mechanism can be described as follows:

Protonation: In the first step, the methanol molecule acts as a base and abstracts a proton from the sulfuric acid catalyst to form the methoxide ion (CH3O-).

Nucleophilic attack: The methoxide ion then attacks the carbon atom of the bromoalkane, which is electrophilic due to the electron-withdrawing effect of the bromine atom. The attack results in the formation of a transition state in which the carbon-bromine bond is weakened and the carbon-oxygen bond is forming.

Elimination: The transition state then collapses to form the product, methylethylmethylcarbinol, with the simultaneous loss of the bromide ion. This step is known as the elimination step and occurs as the newly formed C-O bond is more stable than the weakened C-Br bond.

Learn more about reaction mechanism:https://brainly.com/question/26690612

#SPJ1

answer: 3057.44 m^3

Explanation:

This is Charles Law which is V1/T1=V2/T2  and temp must be in kelvin

So v2=V1 x T2/T1

v2= 3100 X 359.15 / 364.15  = 3057.44 m^3

t1= 91 +273.15 = 364.15

t2=86+273.15 =359.15

The percentage by mass of hydrogen can be calculated from the problem as 2.016

To calculate the mass percent of an atom in a compound, you first need to determine the molar mass of the compound and the molar mass of the atom of interest.

Determine the molar mass of the compound by adding up the atomic masses of all the atoms in the compound.

Determine the number of moles of the atom of interest in one mole of the compound. This is done by dividing the atomic mass of the atom by the molar mass of the compound.

We know that the relative molecular mas of the compound is; 300 g/mol

Then;

Percent by mass of hydrogen is; 6/300 * 100/1

= 2.016%

Learn more about percent by mass:https://brainly.com/question/5394922

#SPJ1

Considering the definition of mass-to-mass ratio concentration, the mass-to-mass ratio concentration of 5 g salt in 100 g water is 0.05%.

The percentage by mass or mass-to-mass ratio concentration indicates the amount of mass of solute present in 100 grams of solution.

The percentage by mass is calculated as the mass of the solute divided by the mass of the solution, the result of which is multiplied by 100 to give a percentage:

mass-to-mass ratio concentration= (mass of solute÷ mass of solution)×100%

In this case, you know:

Replacing in the definition of mass-to-mass ratio concentration:

mass-to-mass ratio concentration= (5 g÷ 100 g)×100%

Solving:

percent by mass= 0.05 %

Finally, the mass-to-mass ratio concentration is 0.05%.

Learn more about mass-to-mass ratio concentration:

brainly.com/question/19168984

#SPJ1

Answer:

A.

Explanation:

Lithium's electron configuration is 1s^2 and 2s^1 , therefore the orbital diagram would have 2 in 1s box and 1 in 2s box.

Lithium's electron configuration is 1s^2 and 2s^1 , therefore the orbital diagram would have 2 in 1s box and 1 in 2s box. Thus, option A is correct.

An atom in the neutral state has the same number of protons and electrons. Since protons carry the positive charge and electrons carry negative charge of equal magnitude as that of protons, so, in neutral state the overall charge on the atom is zero.

Atomic number of Lithium is 3. Under neutral state it has 3 protons and 3 electrons. So, its overall electric charge is 0.

If an atom of Lithium loses one of its outermost electron, it is left with 2 electrons and 3 protons. Since, number of protons is 1 more than the number of electrons, the electrical charge on Lithium atom would be positive and the magnitude of charge will be equal to the number of electrons lost, which is 1 in this case.

Learn more about Lithium on:

https://brainly.com/question/32300971

#SPJ6

The appropriate product are: 2Na(s) + F₂(g) → 2NaF(s), Na(s) + 1/2F₂(g) → NaF(s) and H₂(g) + 1/2O₂(g) → H₂O(g).

The prοcess by which οne οr mοre substances, referred tο as reactants, are changed intο οne οr mοre distinct substances, referred tο as prοducts, by the rearranging οf atοms and the breaking and fοrming οf chemical bοnds, is referred tο as a reactiοn. Chemical equatiοns that display the reactants οn the left and the prοducts οn the right, with an arrοw pοinting in the reactiοn's directiοn, can be used tο describe chemical reactiοns.

The amοunt οf energy released οr absοrbed when οne mοle οf a cοmpοund is prοduced frοm its cοmpοnent elements in their standard states at 1 atm and 25°C is knοwn as the standard enthalpy οf fοrmatiοn, οr Hf. The reactants must be in their standard states and the prοducts must be οne mοle οf the cοmpοund created frοm the cοnstituent elements in their standard states fοr a reactiοn tο have Hrxn equal tο Hf οf the prοduct(s).

These standards allοw us tο cοnclude that the subsequent reactiοns cοmply with the requirements:

2Na(s) + F₂(g) → 2NaF(s)

Na(s) + 1/2F₂(g) → NaF(s)

H₂(g) + 1/2O₂(g) → H₂O(g)

To know more about chemical reaction, visit:

brainly.com/question/29039149

#SPJ1

Answer: Brainlest Please!

Explanation:

To determine how many bars Alexander should pack, we first need to calculate the energy required for the uphill climb and the return trip. We can use the formula for gravitational potential energy to calculate this:

Energy required = m * g * h

where m is the mass of Alexander and his backpack, g is the acceleration due to gravity, and h is the height of the mountain.

First, we need to convert Alexander's weight from pounds to kilograms:

180 lb * (1 kg / 2.205 lb) = 81.65 kg

Assuming Alexander's backpack weighs 10 kg, his total mass is:

m = 81.65 kg + 10 kg = 91.65 kg

Next, we need to convert the height of the mountain from meters to joules:

5620 m * 91.65 kg * 9.81 m/s^2 = 5,029,669 J

Since Alexander assumes he will need as much energy for the return trip, the total energy required is:

2 * 5,029,669 J = 10,059,338 J

Now, we can calculate the number of bars required to provide this amount of energy.

Each bar weighs 100 g, and contains 10 g of fat, 40 g of protein, and 50 g of carbohydrates.

First, we need to calculate the total energy per bar:

10 g of fat * 9 Cal/g + 40 g of protein * 4 Cal/g + 50 g of carbohydrates * 4 Cal/g = 410 Cal

Next, we can calculate the number of bars required:

10,059,338 J * (1 Cal / 4.184 J) * (1 bar / 410 Cal) = 605 bars

Therefore, Alexander should pack approximately 605 nutrition bars for his trip up and down Mt. Krumpett.

Answer: See below

Explanation:

Sodium (Na) - 1 electron on outer shell so would need to lose 1 electron for a full outer shell - making it a 1+ ion

Surfur (S) - 6 electrons on outer shell so would need to gain 2 electrons for a full outer shell - making it a 2- ion

Strontium (Sr) - 2 electrons on outer shell so would need to lose 2 electrons for a full outer shell - making it a 2+ ion

It is a synthetic statin, an dihydroxy monocarboxylic acids, a pyrimidine, a sulfonamide, and a monofluorobenzene. It shares a functional connection with hept-6-enoic acid.

20 mg of rosuvastatin are contained in each film-coated tablet (as rosuvastatin calcium). Each 20 mg tablet also includes 0.025 milligrammes Sunset yellow FCF, 0.029 mg Allura red AC, and 91.755 mg lactose monohydrate.

Yet, because cholesterol has a steroid nucleus, it will behave differently. Aldehyde, ketone, ether, and amide groups don't exist in cholesterol. It only possesses one hydroxyl group, which, like carbohydrates, contains the functional group alcohol.

To know more about dihydroxy visit:

https://brainly.com/question/29137002

#SPJ1

Answer: There are 102,000,000 liters in the container.

Answer:

To find the specific heat of the metal object, we can use the equation:

q = mcΔT

where q is the amount of heat transferred, m is the mass of the object, c is the specific heat capacity, and ΔT is the change in temperature.

We know that the metal object loses heat while the water gains heat, and the total amount of heat lost by the metal object is equal to the total amount of heat gained by the water:

qmetal = qwater

Using the equation above for each of these, we get:

mcΔT = mwatercwaterΔTwater

where cwater is the specific heat capacity of water and mwater is the mass of water.

Substituting in the given values, we get:

(20.9 g)(c)(97.0 °C - 24.1 °C) = (86.0 g)(4.184 J/g·°C)(24.1 °C - 20.5 °C)

Simplifying and solving for c, we get:

c = [(86.0 g)(4.184 J/g·°C)(24.1 °C - 20.5 °C)] / [(20.9 g)(97.0 °C - 24.1 °C)]

c = 0.385 J/g·°C

Therefore, the specific heat of the metal object is 0.385 J/g·°C.

Answer:

oxygen molecule, water molecule, glucose molecule, amino acid molecule, carbon dioxide molecule, protein molecule, starch molecule.

Explanation: