Need help too figure out these questions these are 2 outa 10 i have too do but these the hardest

Answer:

under quadratic equation of fatorisation

The probability of finding 10 defective cores in a sample of 10 power cores is approximately 0.0000161, or about 0.0016%.

Assuming that each fuel rod is independent of each other and that the probability of finding a defective fuel rod is constant at 0.1%, we can model the number of defective fuel rods in a power core with a binomial distribution. Let X be the number of defective fuel rods in one power core, then X follows a binomial distribution with parameters n = 50000 and p = 0.1/100 = 0.001.

To find the probability of finding 10 defective cores, we can use the binomial distribution again, but with a different set of parameters. Let Y be the number of defective cores in a sample of 10 power cores, then Y follows a binomial distribution with parameters n = 10 and p = P(X ≥ 1), where P(X ≥ 1) is the probability of finding at least one defective fuel rod in one power core. We can find P(X ≥ 1) using the complement rule:

P(X ≥ 1) = 1 - P(X = 0)

= 1 - (1 - 0.001)^50000

≈ 0.3935

So, the probability of finding 10 defective cores in a sample of 10 power cores is:

P(Y = 10) = (10 choose 10) * (0.3935)^10 * (1 - 0.3935)^(10 - 10)

≈ 0.0000161

Learn more about Probability at:

brainly.com/question/24756209

#SPJ4

Complete Question:

a power core contains about 50000 fuel rods. if the probability to find one defective fuel rod is 0.1%, what is the probability to find 10 defective cores.

The perimeter of the rectangle is equal to (8x² + 38) units.

The perimeter of a rectangle is the sum of length of its four sides or the sum of its length and breadth, multiplied by two.

length = (4x² - x + 9y) units

breadth = (x + 10y) units

perimeter = 2×(length + breadth)

perimeter of the rectangle = 2(4x² - x + 9y + x + 10y) units

perimeter of the rectangle = 2(4x² + x - x + 9y + 10y) units

perimeter of the rectangle = 2(4x² + 19y) units

perimeter of the rectangle = (8x² + 38y) units

Therefore, the perimeter of the rectangle is equal to (8x² + 38) units.

Read more about rectangle here:https://brainly.com/question/17297081

#SPJ1

The solution to the simultaneous equations log₂x − log₂y = 2 and log₂(x − 2y) = 3 is x = 8 and y = 4.

Given the following equations

log₂x − log₂y = 2

log₂(x − 2y) = 3

We can simplify the first equation by using the rule of logarithms that states:

log a - log b = log(a/b)

Using this rule, we have:

log₂(x/y) = 2

Rewriting this in exponential form, we get:

x/y = 2²

xy = 4

Multiplying both sides by y, we get:

x = 4y

Substituting this into the second equation, we get:

log₂(4y − 2y) = 3

log₂(2y) = 3

Rewriting this in exponential form, we get:

2y = 8

Dividing both sides by 2, we get:

y = 4

Substituting this value into the equation 2y = x, we get:

x = 2 * 4

x = 8

Hence, the solution to the simultaneous equations is x = 8 and y = 4.

Read more about simultaneous equations at

https://brainly.com/question/148035

#SPJ1

Complete question

Solve the simultaneous equations :

log2x − log2y = 2

log2(x − 2y) = 3

Assuming a constant growth factor, the population of Gotham City grew by approximately 4.287% each year.

This can be calculated using the formula for exponential growth, which is:
y = a * (1 + r)^t
Where: y = final value of the population
a = initial value of the population
r = annual growth rate expressed as a decimal
t = number of years

For this problem, let's assume that the initial population of Gotham City was 100,000 and that the population grew for 10 years.

Using these values, we can calculate the annual growth rate as follows:

100,000 * (1 + r)^10 = final population
r = (final population / 100,000)^(1/10) - 1

Plugging in a final population of 148,644 (which is a 48.644% increase from the initial population),

r = (148,644 / 100,000)^(1/10) - 1r = 0.04287 (rounded to 5 decimal places)

Therefore, the annual growth rate (or percentage increase) is approximately 4.287% (rounded to 3 decimal places).

To know more about growth rate refer here:

https://brainly.com/question/13870574

#SPJ11

Answer: You would probably have to play about 10 rounds.

Answer:

11°

Step-by-step explanation:

The sum of the angles in a triangle is always 180°. Therefore, we can find the measure of ∠z by subtracting the measures of ∠x and ∠y from 180°:

∠z = 180° - ∠x - ∠y

∠z = 180° - 110° - 59°

∠z = 11°

Therefore, the measure of ∠z is 11°

Answer:

A:1,142 miles.

B; 187.30

C; 4

Answer: 100 cm

Step-by-step explanation:

1. Since the problem tells us that they are similar, we can infer that this larger rectangle is the same rectangle, only bigger.

2. With this information, we can do the equation 49/12.25 because then we will get the amount the rectangle grows by.

3. 49/12.25=4

4. Now, we can multiply the length(25) by 4.

5. 25 x 4=100

6. The length of the larger rectangle is 100.

I hope this helps!

a) The power series representation of f(x) = 1/5 + x f(x) centered at x = 0 is f(x) = sigma^infinity_n = 0 ((x/5)^n)

b) The interval of convergence is (-5, 5)

To find the power series representation of f(x), we can use the formula for the geometric series

1 / (1 - r) = sigma^infinity_n = 0 (r^n)

where r is a constant.

In this case, we have

f(x) = 1/5 + x f(x)

We can solve for f(x) to get

f(x) = 1/5 / (1 - x)

Using the formula for the geometric series with r = x/5, we have

f(x) = sigma^infinity_n = 0 ((x/5)^n)

Multiplying both sides by 5, we get

5f(x) = sigma^infinity_n = 0 (x^n

So the power series representation of f(x) centered at x = 0 is

f(x) = sigma^infinity_n = 0 ((x/5)^n)

To determine the interval of convergence, we can use the ratio test

| (x/5)^(n+1) | / | (x/5)^n | = |x/5|

The series converges if the limit of |x/5| as n approaches infinity is less than 1. This is true when |x| < 5, so the interval of convergence is (-5, 5).

Learn more about power series here

brainly.com/question/17193241

#SPJ4

There are 84 different combinations of 3 books that can be selected from a stack of 9 books. Each combination can be arranged in 6 different ways, resulting in a total of 504 ways.

The number of ways to select 3 books from a stack of 9 books and arrange them in the empty space on the bookshelf can be calculated using the combination formula and the permutation formula.

First, we need to calculate the number of combinations of 3 books that can be selected from the stack of 9 books:

C(9,3) = 9! / (3! * (9-3)!) = 84

This means there are 84 different combinations of 3 books that can be selected from the stack.

Next, we need to calculate the number of ways that each combination of 3 books can be arranged in the empty space on the bookshelf. Since we have 3 spaces on the bookshelf, we can use the permutation formula to calculate the number of ways that 3 books can be arranged in 3 spaces:

P(3,3) = 3! = 6

This means that there are 6 different ways that each combination of 3 books can be arranged on the bookshelf.

To calculate the total number of ways to select 3 books from the stack and arrange them on the bookshelf, we can multiply the number of combinations by the number of permutations:

Total number of ways = C(9,3) * P(3,3) = 84 * 6 = 504

Therefore, there are 504 different ways to select 3 books from the stack and arrange them on the bookshelf.

To know more about different ways:

https://brainly.com/question/28643347

#SPJ4

Answer:

The rate of production of H2O is 1.35 M/s.

Step-by-step explanation:

To calculate the rate of production of H2O, we need to consider the stoichiometry of the balanced chemical equation:

2 C3H6 + 2 NH3 + 3 O2 → 2 CH2CHCN + 6 H2O

Given the rate of consumption of C3H6 is 0.45 M/s, we can use the mole ratio between C3H6 and H2O to find the rate of production of H2O.

Step 1: Determine the mole ratio of C3H6 to H2O in the balanced equation.

Mole ratio = (moles of H2O produced) / (moles of C3H6 consumed) = 6 / 2 = 3

Step 2: Calculate the rate of production of H2O.

Rate of H2O production = (rate of C3H6 consumption) × (mole ratio) = 0.45 M/s × 3 = 1.35 M/s

So, the rate of production of H2O is 1.35 M/s.

Learn more about rate of production of H2O,

https://brainly.com/question/29121165

#SPJ11

The point would be in quadrant III since both numbers are negative.

Answer: Quadrant III

Step-by-step explanation:

1. Quadrant I has a positive x and y value

2. Quadrant II has a negative x and positive y value

3. Quadrant III has a negative x and negative y value

4. Quadrant IIII has a positive x and negative y value.

Therefore, the answer is Quadrant III.

There are 6 possible arrangements of four children on a 4-animal merry-go-round if Andy is seated on the giraffe.

If Andy is seated on the giraffe in a 4-animal merry-go-round, the arrangement of four children on the merry-go-round can be determined as follows:

Since Andy is already seated on the giraffe, only three children are left to be seated on three other animals. The first child can be seated on any of the three remaining animals. The second child can be seated on either of the two remaining animals since one has already been occupied.

Finally, the third child can be seated on the only remaining animal. Therefore, there are three options for the first child, two options for the second child, and one option for the third child, resulting in 3*2*1 = 6 possible arrangements of four children on a 4-animal merry-go-round if Andy is seated on the giraffe.Answer:6.

Learn more about  permutation theory:https://brainly.com/question/12468032

#SPJ11

Answer:

a=100

Step-by-step explanation:

Hence, x has a value of 49 as to find x, we add 9 to both sides and divide the result by 3.

The distance between two intersecting lines or planes is measured in terms of angles. The amount of rotation required to align one of the lines or planes with the other is usually expressed in terms of degrees. The range of an angle is 0 degrees (i.e., no rotation) to 360 degrees (corresponding to a complete rotation).

given

As angles 5 and 7 are a pair of linear angles, their sum must be 180 degrees. Angle 7 therefore has a measure of 180 - 42 = 138 degrees.

We can use the fact that angles 6 and 7 are vertical angles and have the same measure to find the value of x. As a result, we can set the following phrase to indicate that the measure of angle 6 is equal to angle 7:

3x - 9 = 138

In order to find x, we add 9 to both sides and divide the result by 3:

3x = 147

x = 49

Hence, x has a value of 49 as to find x, we add 9 to both sides and divide the result by 3.

To know more about angles visit:

https://brainly.com/question/14569348

#SPJ1

When you flip two coins 28 times, the best prediction possible for the number of times both coins will land on heads is 7 times.

This can be explained with the following calculations:

When flipping a coin, the chance of getting heads or tails is 1/2 or 0.5.

If you flip two coins, the probability of getting two heads is calculated by multiplying the probability of getting heads on the first coin by the probability of getting heads on the second coin, which is (1/2) x (1/2) = 1/4 or 0.25 or 25%.

To calculate the expected number of times both coins will land on heads in 28 flips, we use the following formula:

Expected value = Probability x Total number of flips

Expected value = 0.25 x 28

Expected value = 7

Therefore, the best prediction possible for the number of times both coins will land on heads is 7 times.

It's important to note that this is only a prediction, and the actual number of times both coins land on heads could be more or less than 7.

This is because probabilities are based on chance, and chance outcomes can be unpredictable.

For similar question on probability.

https://brainly.com/question/29061226

#SPJ11

When someone describes a distribution as having a floor effect, it means that the distribution is characterized by a significant clustering of values at the minimum value, creating a skewed distribution with a long tail on the higher end.

This phenomenon is often observed in situations where there is a lower limit or minimum value that restricts the possible range of values that can be observed. The floor effect can be seen in various domains such as clinical trials, educational testing, psychological assessments, and market research, to name a few.

For instance, in a clinical trial, the use of an intervention that is highly effective in reducing symptoms may lead to a large number of participants reaching the minimum score, making it difficult to differentiate between groups in terms of treatment response.

Similarly, in educational testing, a poorly designed test or a test that is too easy for the group being tested may result in a floor effect, where students cluster around the lowest score and scores do not differentiate between students with different levels of knowledge.

A floor effect can be problematic because it can limit the ability to detect differences or changes in scores or performance, which can have implications for interpreting and comparing results across different groups or time points.

For more details about distribution click here:

https://brainly.com/question/29062095#

#SPJ11

Answer:

x=5 or x=-5

Step-by-step explanation:

[tex]x^{2} -25=0[/tex]

[tex](x-5)(x+5) =0[/tex]

[tex]x=-5 \\x=5[/tex]

Based on the graph, it looks like the function being graphed is h(x) = √(x+4).

To graph this function using translations, we can start by looking at the graph of the parent function f(x) = √x, which is a basic square root function. The graph of f(x) looks like a half of a parabola, opening up from the origin (0,0), and it includes all points with non-negative x-coordinates.

To graph h(x) = √(x+4), we can start by applying a horizontal shift to the graph of f(x) by replacing x with (x - (-4)) = (x + 4). This will shift the graph of f(x) to the left by 4 units. The resulting function is:

h(x) = √(x+4) = f(x+4)

Next, we can apply a vertical shift of 4 units up, which will move the entire graph of h(x) up by 4 units. The resulting function is:

h(x) = √(x+4) + 4

Using these translations, we can graph h(x) as follows:

Start with the graph of f(x) = √x.

Shift the graph to the left by 4 units by replacing x with (x+4).

Shift the graph up by 4 units by adding 4 to the function.

Plot some points on the resulting graph and connect them with a smooth curve.

The resulting graph should look like the one in the image you provided.

To learn more about function click here

brainly.com/question/30594198

#SPJ1

The function is increasing over the intervals D. -6 < x < -1 and 2 < x < 3 and 4 < x < 6.

A function is increasing when the slope of its graph is positive, meaning that its graph is rising from left to right.

In the given coordinate plane, the graph of the function consists of three sections, each of which has an increasing slope.

The first section is from -6 to -1, the second section is from 2 to 3, and the third section is from 4 to 6.

This means that the function is increasing over the intervals -6 < x < -1 and 2 < x < 3 and 4 < x < 6.

To confirm this, we can calculate the slope of the graph in each interval. The slope of the graph between two points (x1,y1) and (x2,y2) is given by (y2-y1)/(x2-x1).

For the first interval, the slope is (3-(-5))/(-1-(-6)) = 8/-5 = -1.6. This is a negative value, which means the graph is decreasing over this interval. For the second interval, the slope is (4-3)/(3-2) = 1/1 = 1. This is a positive value, so the graph is increasing over this interval.

For the third interval, the slope is (6-4)/(4-2) = 2/2 = 1. This is also a positive value, so the graph is increasing over this interval as well.

Therefore, the function is increasing over the intervals -6 < x < -1 and 2 < x < 3 and 4 < x < 6, which is option D.

For more questions related to slope

https://brainly.com/question/3493733

#SPJ1

In conclusion, we can say that the IQR is a better measure of variation for these data because it is less affected by outliers and gives a more accurate picture of the spread of the data.

The given box plot illustrates the population of several states (in millions).

The range and the interquartile range (IQR) are both the measures of variation that explain the variation within a set of data, but there are some variations between these two measures.

Let's discuss the differences between these two measures.
Range:
The range is defined as the difference between the highest and lowest values of a data set.

The range is useful for describing the overall spread of the data, which is particularly useful when dealing with very small datasets.

This measure is sensitive to the extreme values, such as outliers.

Because of this, the range of the population of several states can be used to identify the minimum and maximum value for the population of several states.
IQR:
The interquartile range (IQR) is the difference between the 75th and 25th percentiles, also known as the first and third quartiles, in a data set.

The IQR is a better measure of variation than the range because it is less sensitive to extreme values or outliers.

As a result, the IQR is a more robust measure of the spread of the data.

Therefore, it is better to use the IQR for the population of several states since it gives a more accurate picture of the spread of the data.

For similar question on IQR.

https://brainly.com/question/17083142

#SPJ11

Answer: -5 ≤ x ≤ 0.

Step-by-step explanation:

To solve the inequality, we need to consider two cases:

Case 1: -2x - 5 ≤ 5

Adding 5 to both sides gives:

-2x ≤ 10

Dividing both sides by -2 and reversing the inequality:

x ≥ -5

Case 2: -(-2x - 5) ≤ 5

Simplifying:

2x + 5 ≤ 5

Subtracting 5 from both sides gives:

2x ≤ 0

Dividing both sides by 2:

x ≤ 0

Therefore, the solution set is -5 ≤ x ≤ 0.

Answer:

Interpolation and extrapolation are two methods used to estimate data points within or beyond a given set of values.Interpolation is the process of estimating a data point within the given range of values, based on the relationship between the known data points. For example, suppose we have the following data points: (1, 3), (2, 5), and (4, 9). If we want to estimate the value of y for x = 3, we can use interpolation to calculate it based on the trend of the data points within the given range. In this case, we can see that the slope of the line between (2, 5) and (4, 9) is the same as the slope of the line between (1, 3) and (2, 5). Therefore, we can estimate the value of y for x = 3 to be 7, using the trend of the known data points.Extrapolation, on the other hand, is the process of estimating a data point beyond the given range of values, based on the trend of the known data points. For example, suppose we have the same data points as before: (1, 3), (2, 5), and (4, 9). If we want to estimate the value of y for x = 5, we can use extrapolation to calculate it based on the trend of the known data points. In this case, we can see that the slope of the line between (2, 5) and (4, 9) is the same as the slope of the line between (1, 3) and (2, 5). Therefore, we can estimate the value of y for x = 5 to be 11, assuming that the trend of the known data points continues beyond the given range.Here is a graph that shows both interpolation and extrapolation:

{graph attached below}

In the graph, the blue dots represent the known data points. The red line represents the trend of the known data points, which can be used for interpolation and extrapolation. The green dot represents an interpolated data point, while the purple dot represents an extrapolated data point.In summary, interpolation and extrapolation are similar in that they both involve estimating data points based on the trend of the known data points. However, they differ in that interpolation estimates data points within the given range of values, while extrapolation estimates data points beyond the given range of values.

hope this helps!

Exponential notation is useful in this scenario because it can help us quickly calculate the total number of amoebas that exist after a certain number of hours without having to write out each step of the division process.

Exponential notation, also known as scientific notation, is a way of representing a number as a product of two factors: a coefficient and a power of 10. The coefficient is a number between 1 and 10, and the power of 10 indicates how many places the decimal point must be moved to obtain the original number.

In the given scenario, we can see that each amoeba doubles every hour, which is an example of exponential growth. Using exponential notation, we can represent the number of amoebas after n hours as 2^n. For example, after 2 hours, there would be 2^2 = 4 amoebas, and after 3 hours, there would be 2^3 = 8 amoebas.

Learn about exponential notations here https://brainly.com/question/30239895

#SPJ1

The probability of default in the fourth year conditional on no earlier default is 14.5%. Option (4).

The probability of default in the fourth year conditional on no earlier default is equal to the probability of default in the fourth year, given that the company did not default in the first three years.

Using the conditional probability formula, we can calculate this probability as follows:

P(Default in Year 4 | No earlier default) = P(Default in Year 4 and No earlier default) / P(No earlier default)

We can calculate the numerator by multiplying the probability of default in the fourth year (14.5%) by the probability of no earlier default, which is the complement of the sum of the probabilities of default in the first three years:

P(Default in Year 4 and No earlier default) = 0.145 x (1 - 0.03 - 0.065 - 0.10) = 0.145 x 0.705 = 0.102

The denominator is simply the probability of no earlier default, which we just calculated:

P(No earlier default) = 1 - 0.03 - 0.065 - 0.10 = 0.705

Now we can substitute these values into the conditional probability formula:

P(Default in Year 4 | No earlier default) = 0.102 / 0.705 = 0.1449, or approximately 14.5%

Therefore, the probability of default in the fourth year conditional on no earlier default is 14.5%.

Learn more about probability

https://brainly.com/question/30034780

#SPJ4

Full Question : Suppose that the cumulative probability of a company defaulting by years one, two, three and four are

respectively. what is the probability of default in the fourth year conditional on no earlier default?

The probability that the average lifetime of 100 components is less than 4650 hours is 0.62%.

Using the Central Limit Theorem, we can find the probability that the average lifetime of 100 components is less than 4650 hours.

Let x represent the average lifetime of 100 components. The mean and standard deviation of x can be found using the following formulas:

Mean of x = 5000 hours

Standard Deviation of x = 200/sqrt(100) = 20 hours

To find the probability that the average lifetime of 100 components is less than 4650 hours, we need to use the normal distribution formula. This can be written as follows:

P(X < 4650)

⇒ P(Z < (4650-5000)/20)

⇒ P(Z < -2.5)

Using a standard normal table, the probability of Z being less than -2.5 is 0.0062, or 0.62%. Therefore, the probability that the average lifetime of 100 components is less than 4650 hours is 0.62%.

Learn more about probability here:

brainly.com/question/30034780

#SPJ11