iona discovers that the lifespan of cats is normally distributed with mean 12 years and standard deviation 2 years. what is the best estimate for the probability of a cat living more than 16 years?

[tex]y = 2800(1.033)^t[/tex] is the exponential function for starting population of 2800 bacterium cells that is shown to multiply exponentially over time using this function, increasing by a factor of 1.033 every hour.

We can use an exponential function of the type y = abt to simulate the development of bacteria cells over time, where y stands for the number of cells, t for the number of hours, and a and b for constants that we must establish.

Since we now know there are 2800 bacterium cells, we can enter this number into the equation to obtain:

[tex]2800 = ab^0[/tex]

By simplifying this equation, we obtain a = 2800, which informs us that there are 2800 bacterium cells in the initial population.

We must use the knowledge that the number of cells rises by 3.3% every hour to get the value of b. By dividing this percentage growth by 100, we can convert it to a decimal, yielding a growth rate of 0.033. The value of b can then be obtained by multiplying this growth rate by 1:

b = 1 + 0.033 = 1.033

These values of a and b are what we obtain when we enter them into our exponential function:

[tex]y = 2800(1.033)^t[/tex]

Learn more about exponential function here:

https://brainly.com/question/14355665

#SPJ4

To put fractions in order from least to greatest, you need to compare their values by finding the common denominator.

Step 1: Find a common denominator for all the fractions.

Step 2: Convert each fraction to an equivalent fraction with the common denominator.

Step 3: Compare the numerators of the equivalent fractions. The fraction with the smallest numerator is the smallest fraction, and the fraction with the largest numerator is the largest fraction.

Step 4: If two or more fractions have the same numerator, compare their denominators. The fraction with the smallest denominator is the smallest fraction, and the fraction with the largest denominator is the largest fraction.

Step 5: Write the fractions in order from least to greatest.

For example, let's say you need to put the fractions 1/3, 2/5, and 3/8 in order from least to greatest.

Step 1: The common denominator for 3, 5, and 8 is 120.

Step 2: Convert each fraction to an equivalent fraction with a denominator of 120.

1/3 = 40/120

2/5 = 48/120

3/8 = 45/120

Step 3: Compare the numerators of the equivalent fractions: 40 < 45 < 48

Step 4: Since 40 is not equal to 45 or 48, we don't need to compare the denominators.

Step 5: Write the fractions in order from least to greatest: 1/3 < 3/8 < 2/5.

To learn more about fractions click on,

https://brainly.com/question/29158062

#SPJ4

The z-score for an IQ score of 122 is 2.

This is calculated by subtracting the mean (100) from the score (122) and dividing by the standard deviation (15). So, 122-100=22, 22/15=2.

Learn more about normal distribution

brainly.com/question/25394084

#SPJ11

The answers

are 12, 15, 13

__________________________________________________________

The sum of two sides must be equal to or greater than the third side.

4+15 = 19; 4 + 19 = 23; 15 + 19 = 34.

19 is a possible answer.

4 + 15 = 19; 15 + 15 = 30

15 is a possible answer.

4 + 15 = 19; 4 + 13 = 17; 15 + 13 = 28

13 is a possible answer.

4 + 12 = 16; 4 + 15 = 19; 15 + 12 = 27

12 is a possible answer.

4 + 11 = 15; 4 + 15  = 19; 11 + 15 = 26

11 is a possible answer.

15 + 4 = 19; 4 + 4 = 8

4 is NOT a possible answer because 4 + 4 is less than 15.

--------------------------------------HAVE A NICE DAY--------------------------------------------

Answer:

2 [tex]\frac{2}{3}[/tex] [tex]in^{2}[/tex]

Step-by-step explanation:

a. The revenue function, r(x), is given by the product of the price x and the demand function d(x):

[tex] \sf r(x) = x \times d(x) = x \times (400 - 4x) = 400x - 4x^2[/tex]

The domain of this function is the set of possible prices that can be charged for the jeans, which is typically a positive real number, or in interval notation: (0, infinity).

b. If the price is $40, we can find the revenue by plugging in x = 40 into the revenue function:

[tex] \sf r(40) = 400(40) - 4(40)^2 = 16,000 - 6,400 = 9,600[/tex]

Therefore, the company will earn $9,600 in revenue if they sell their jeans at a price of 40

This shows that TB did not have a game-long advantage but rather needed to recover from a deficit to triumph.

A subfield of mathematics known as probability studies random events and the possibility that they will occur. It entails calculating the probability of an event happening and expressing it as a number between 0 and 1, with 0 denoting an impossibility and 1 denoting a certainty. The possibility of a coin landing heads-up, the chances of winning a game, or the likelihood of a disease spreading throughout a population are just a few examples of real-world occurrences that may be studied and understood using probability.

given

It is most likely that option 1 happened, according to the victory probability chart in the illustration provided: TB came out as the favourite, trailed for the majority of the game, then made a late comeback.

The graph demonstrates that the victory probability for TB initially increased before sharply declining as NO seized the lead and kept it for the most of the game.

The dramatic increase in the win probability for TB towards the end of the chart, however, shows that TB came back and won in the final few minutes of the game.

This shows that TB did not have a game-long advantage but rather needed to recover from a deficit to triumph.

To know more about probability visit:

https://brainly.com/question/11234923

#SPJ1

Answers:

Q.1 B. 6.88.

Q2. Sorry Not clearly visible its blurred

Q3. The closest answer choice is C. 4.9

Q4. 2.94

Q5. Set B

Q6. C

Step-by-step explanation:

Q1.

To find the mean absolute deviation, we first need to find the mean of the data set

Data: 32, 43, 38, 28, 51

Mean = (32 + 43 + 38 + 28 + 51) / 5 = 38.4

Next, we need to find the absolute deviations of each number from the mean

|32 - 38.4| = 6.4

|43 - 38.4| = 4.6

|38 - 38.4| = 0.4

|28 - 38.4| = 10.4

|51 - 38.4| = 12.6

To find the mean absolute deviation, we need to take the average of these absolute deviations

Mean Absolute Deviation = (6.4 + 4.6 + 0.4 + 10.4 + 12.6) / 5 = 6.88

Therefore, the answer is B. 6.88.

Q3.

To find the mean absolute deviation, we first need to find the mean of the data set

Data: 12.7, 22, 23.5, 24, 11, 22

Mean = (12.7 + 22 + 23.5 + 24 + 11 + 22) / 6= 18.2

Next, we need to find the absolute deviations of each number from the mean

|12.7 - 18.2| = 5.5

|22 - 18.2| = 3.8

|23.5 - 18.2| = 5.3

|24 - 18.2| = 5.8

|11 - 18.2| = 7.2

|22 - 18.2| = 3.8

To find the mean absolute deviation, we need to take the average of these absolute deviations

Mean Absolute Deviation = (5.5 + 3.8 + 5.3 + 5.8 + 7.2 + 3.8) / 6 = 5.9

Therefore, the closest answer choice is C. 4.9. However, this answer is not correct as the calculated value is 5.9.

Q4.

To find the average distance of these points from the mean of the data, we need to first find the mean of the data.

The mean of the data can be found by adding up all the values and dividing by the total number of values:

Mean = (-8 + 6.2 + 2.5 + 12 - 2 - 1.3 + 15 - 2 + 0 + 7) / 10

= 29.4 / 10

= 2.94

The average distance from the mean is found by taking the absolute value of the difference between each value and the mean, adding them up, and dividing by the total number of values:

Average Distance from Mean = (|(-8) - 2.94| + |6.2 - 2.94| + |2.5 - 2.94| + |12 - 2.94| + |-2 - 2.94| + |-1.3 - 2.94| + |15 - 2.94| + |-2 - 2.94| + |0 - 2.94| + |7 - 2.94|) / 10

= (10.94 + 3.26 + 0.44 + 9.06 + 4.94 + 4.24 + 12.06 + 4.94 + 2.94 + 4.06) / 10

= 5.688

Therefore, the average distance of these points from the mean of the data is 5.688, which is option D.

Q5.

o find out if the mean and median are equal in a set of data, we need to calculate both the mean and median and compare them.

Mean is calculated by adding up all the values and dividing by the total number of values.

Median is the middle value of the data when it is arranged in order.

Let's calculate the mean and median of both data sets:

A. (5, 3, 5, 8, 2, 5)

Mean = (5 + 3 + 5 + 8 + 2 + 5) / 6

= 4.6667

To calculate the median, we first need to arrange the data in order:

2, 3, 5, 5, 5, 8

Since the data set has an even number of values, the median is the average of the middle two values:

Median = (5 + 5) / 2

= 5

Since the mean and median of set A are not equal (4.6667 ≠ 5), set A is not the correct answer.

B. (7, 3, 5, 11, 5, 3)

Mean = (7 + 3 + 5 + 11 + 5 + 3) / 6

= 5.8333

To calculate the median, we first need to arrange the data in order:

3, 3, 5, 5, 7, 11

Since the data set has an even number of values, the median is the average of the middle two values:

Median = (5 + 5) / 2

= 5

Since the mean and median of set B are equal (5.8333 ≈ 5), set B is the correct answer.

Therefore, the set of data in which the mean and median are equal is set B: (7, 3, 5, 11, 5, 3). Answer: B.

Q6.

To answer this question, we need to first find the mean, median, and range of the data:

Data: 10, 23, 52, 18, 5, 60, 35

Mean = (10 + 23 + 52 + 18 + 5 + 60 + 35) / 7

= 28.57

Median = 23

To find the range, we need to subtract the smallest value from the largest value:

Range = 60 - 5

= 55

Now, let's evaluate each statement:

A. The mean is greater than the range.

- 28.57 > 55

- This statement is false.

B. The range is 50.

- The range is 55, not 50.

- This statement is false.

C. The median is less than the mean.

- The median is 23 and the mean is 28.57

- This statement is true.

D. The median is greater than the range.

- 23 > 55

- This statement is false.

Therefore, the statement that is true is C. The median is less than the mean.

Step-by-step explanation:

729 = 9³ = (3²)³ = 3⁶

I hour that is what you needed.

Answer:

x>7

Step-by-step explanation:

The circle is open so seven is not included which eliminates the second and fourth choice.

x<7 means x is less than seven which is wrong.

x> means x is greater than seven.

Answer:

x > 7

Step-by-step explanation:

We see that the arrow is going to the right, signaling greater than.

We know that it is not greater than or equal to, since the dot is not shaded.

So, the answer is x > 7.

a) Mean time between counts is 0.3333 minutes.

b) Standard deviation of time between counts is 0.5774 minutes.

a. Mean time between counts: The mean time between counts can be computed as the inverse of the Poisson rate parameter (λ): Mean time between counts = 1/λ.

The average of 3 counts per minute is the same as the rate parameter λ in a Poisson process. Thus, the mean time between counts is: Mean time between counts = 1/λ = 1/3 = 0.3333 minutes (20 seconds approximately).

b. Standard deviation of the time between counts: The standard deviation of a Poisson process is equal to the square root of the mean.

Therefore, the standard deviation of the time between counts can be calculated as follows: Standard deviation of time between counts = sqrt(mean) = sqrt(1/λ) = sqrt(1/3) = 0.5774 minutes (approximately 35 seconds).

To know more about Poisson rate click on below link:

https://brainly.com/question/17280826#

#SPJ11

To measure central tendencies in the data collected from the Consumer Price Index (CPI), the dental director should use measures of central tendency, such as the mean, median, and mode.

The mean is the average of a set of numbers and is calculated by adding all the numbers together and then dividing by the total number of numbers. The median is the middle number when the numbers are placed in order from least to greatest. The mode is the number that appears most often in a set of numbers.

Using these measures of central tendency will allow the dental director to gain a better understanding of the CPI data, as they will be able to identify the center point of the data and also see how frequently particular values appear. This can help in making informed decisions about policies and other changes.

See more about measure at: https://brainly.com/question/20904592

#SPJ11

The high school dropout rate in the United States is greater than 25 percent. C. Wright Mills would classify this situation as a societal issue.

This is because societal issues are matters of public concern that affect large numbers of people and require collective action to resolve. The high school dropout rate in the United States is an example of a societal issue because it has widespread implications for both individuals and society as a whole.

According to Mills, a societal issue is one that cannot be attributed solely to the actions of individuals. Instead, it is the result of social structures and processes that operate at a broader level.

For example, the high school dropout rate in the United States is influenced by a variety of factors such as poverty, race, and family background. These factors are not solely determined by the actions of individual students but are instead shaped by broader social forces such as economic inequality and institutional racism.

To address the high school dropout rate, therefore, requires collective action at the societal level. This may involve policy changes, community-based initiatives, or other forms of collective action aimed at addressing the underlying social factors that contribute to the problem.

To know more about dropout rate refer here:

https://brainly.com/question/19130877

#SPJ11

In linear programming, the feasible region is the set of all feasible solutions that satisfy the constraints of the problem. The feasible corner points are the extreme points of the feasible region, which represent the optimal solutions to the problem. In this case, we have four feasible corner points: (48,84), (0,120), (0,0), and (90,0).

To find the maximum possible value for the objective function, we need to evaluate the objective function at each of the feasible corner points and select the one that gives the highest value. The objective function is a linear combination of the decision variables and represents the quantity that we are trying to maximize or minimize.

Assuming that the objective function is in the form of z = ax + by, where x and y are the decision variables and a and b are constants, we can evaluate the objective function at each of the feasible corner points:

At (48,84): z = a(48) + b(84)

At (0,120): z = a(0) + b(120)

At (0,0): z = a(0) + b(0)

At (90,0): z = a(90) + b(0)

Since we don't have the values of a and b, we cannot calculate the maximum possible value of the objective function. However, we can compare the values of the objective function at each of the feasible corner points and select the one that gives the highest value.

Therefore, we can conclude that the maximum possible value for the objective function will be obtained at one of the feasible corner points: (48,84), (0,120), (0,0), or (90,0).

For more details about linear click here:

https://brainly.com/question/15830007#

#SPJ11

The vertices of the image of QRTW for a dilation with center (0, 0) and a scale factor of 1/4 include the following:

Q' (-0.5, 0.75).

R' (-0.75, 0.25).

T' (0.5, -0.25).

W' (0.25, 1).

In Mathematics and Geometry, dilation can be defined as a type of transformation which typically changes the size of a geometric object, but not its shape.

Next, we would have to dilate the coordinates of the pre-image by using a scale factor of 1/4 centered at the origin (0, 0) as follows:

Ordered pair Q (-2, 3) → Ordered pair Q' (-2 × 1/4, 3 × 1/4) = (-0.5, 0.75).

Ordered pair R (-3, 1) → Ordered pair R' (-3 × 1/4, 1 × 1/4) = (-0.75, 0.25).

Ordered pair T (2, -1) → Ordered pair T' (2 × 1/4, -1 × 1/4) = (0.5, -0.25).

Ordered pair W (2, 4) → Ordered pair W' (2 × 1/4, 4 × 1/4) = (0.25, 1).

Read more on dilation here: brainly.com/question/9459722

#SPJ1

The extraneous solution which arises when solving for the point of intersection of the line and the square root function is 20.

What is an extraneous solution?

An extraneous solution in mathematics is a solution that develops during the process of addressing the problem but is not a legitimate solution to the problem, such as the answer to an equation.

We are given two equations as f(x) = [tex]\frac{-1}{2}[/tex]x + 6 and f(x) = √x - 4.

Now, on equating both the equations, we get

⇒ [tex]\frac{-1}{2}[/tex]x + 6 = √x - 4

On squaring both sides, we get,

⇒ [tex](\frac{-1}{2}x + 6)^{2}[/tex]= x - 4

⇒ [tex]\frac{1}{4}x^{2}[/tex] + 36 - 6x = x - 4

⇒ [tex]\frac{1}{4}x^{2}[/tex] + 40 = 7x

⇒ [tex]\frac{1}{4}x^{2}[/tex] -7x + 40 = 0

⇒ [tex]x^{2}[/tex] -28x + 160 = 0

⇒ x = 20 , 8

For point of intersection, we will substitute x = 20 in both the equations.

So, we get

⇒ f(x) = [tex]\frac{-1}{2}[/tex] (20) + 6

⇒ f(x) = -10 + 6

⇒ f(x) = -4

Similarly,

⇒ f(x) = √20 - 4

⇒ f(x) = √16

⇒ f(x) = 4

Since both the solutions are not same so this is an extraneous solution.

Hence, the extraneous solution which arises is 10.

Learn more about extraneous solution from the given link

https://brainly.com/question/15395568

#SPJ1

Plot the x-intercept of (-0.5,0) Plot the y-intercept of (0,-2) Draw a line passing through both intercepts.

To graph 4x + 2y = 8, we'll first look at the x-intercept and y-intercept.

The x-intercept occurs when y is zero, and the y-intercept occurs when x is zero.

0 = 4x + 2y => x = -0.5y = 4x + 2(0) => y = -2

From the two equations, we get the ordered pairs(-2,0), and (-0.5,0) as our intercepts.

The line defined by these two points and that represent all solutions to the equation is:

y = -2x + 4

The table would show different values of x for different values of y, but since there are no specific values to solve, you

just have to use the slope-intercept formula to determine the points on the graph.

Here's how to plot the ordered pairs on a graph:

Plot the x-intercept of (-0.5,0)

Plot the y-intercept of (0,-2)

Draw a line passing through both intercepts.

for such more question on x-intercept

https://brainly.com/question/11989858

#SPJ11

6(y - 7z) This is a product with a whole number greater than 1 (6), since we factored out a 6 from the original expression.

A factor is an expression or number that evenly divides another expression or number without leaving a remainder.

To factor the expression 6y - 42z, we need to find the greatest common factor (GCF) of the two terms.

The GCF of 6y and 42z is 6, since both terms are divisible by 6. We can factor out the 6 from both terms, leaving:

6(y - 7z)

Notice that the term inside the parentheses (y - 7z) cannot be factored any further, since there is no common factor other than 1. Therefore, the fully factored form of 6y - 42z is:

6(y - 7z)

This is a product with a whole number greater than 1 (6), since we factored out a 6 from the original expression.

To learn more about factor visit:

https://brainly.com/question/29216619

#SPJ1

The probability that at least 67 out of 100 cars stopped at a roadblock will not be given a ticket is 2.37.

Given Probability of giving tickets to cars that are stopped = 0.23

Probability of not giving tickets to cars that are stopped = 1 - 0.23 = 0.77

the probability that at least 67 out of 100 cars stopped at a roadblock will not be given a ticket

Here n = 100, p = 0.77, q = 0.23

mean = np = 100*0.77 = 77

standard deviation = [tex](sigma = \sqrt{(100)*(0.77)*(0.23) } = 4.208[/tex]

[tex]P(X\geq 67) = \frac{67 - 77}{4.208}[/tex] = 2.37

P-VALUE is 0.99126 from z-table

Probability is a fundamental concept in mathematics that helps us quantify the likelihood of events occurring and is applicable to a wide range of fields. It is a measure of the uncertainty of an event, expressed as a number between 0 and 1. An event with probability 0 is impossible, while an event with probability 1 is certain.For example, the probability of rolling a six on a fair six-sided die is 1/6, since there is only one favorable outcome out of six possible outcomes.

Probability theory has wide applications in fields such as statistics, finance, engineering, and physics, among others. It is used to model and analyze various phenomena, including weather patterns, stock prices, quantum mechanics, and more.

To learn more about Probability visit here:

brainly.com/question/30034780

#SPJ4

Answer:

1.6 minutes

Step-by-step explanation:

6.4 meters/4 speed

a) General solution of the system is (x, y, z) = (2, 0, 1).

b) There are no multiple solutions, and we cannot find two specific solutions.

The given system of linear equations is:
1) x - y + z = 3
2) 3x + 2z = 7
3) x - 4y + 2z = 5

The reduced matrix for this system is:
1 0 1
0 1 0
0 0 1

Using the reduced matrix, we can rewrite the system of linear equations as:
1) x + z = 3
2) y = 0
3) z = 1

Now we can solve the system step by step:

From equation (3), we know that z = 1.

Next, we can use the value of z in equation (1) to find x:
x + 1 = 3
x = 3 - 1
x = 2

Finally, from equation (2), we know that y = 0.

So, the general solution of the system is (x, y, z) = (2, 0, 1).

(b) Since there is only one solution to this system, there are no multiple solutions, and we cannot find two specific solutions.

Learn more about linear equations.

brainly.com/question/11897796

#SPJ11

The percentage discount on the hammers is about 21%.

The discount is the difference between the original price and the discounted price.

Discount = $12 - $9.50

subtract the numbers

= $2.50

To find the percentage discount, we divide the discount by the original price and multiply by 100

Percentage discount = ( Discount / Original price ) x 100

Substitute the values in the equation and find the percentage discount

Percentage discount = ( $2.50 / $12 ) x 100

Do the arithmetic operation

Percentage discount = 20.83%

Rounding to the nearest whole percentage, the discount is approximately equal to 21%.

Learn more about percentage discount here

brainly.com/question/1931096

#SPJ4

The associative property works with expressions that use multiplication and addition. The correct option is (D).

The associative property is a rule in mathematics that allows us to change the grouping of the numbers or variables in an expression without changing the result. This property only applies to addition and multiplication, and not to subtraction and division.

The associative property of addition tells us that we can add a group of numbers in any order, and the result will be the same. For example, (2 + 3) + 4 is the same as 2 + (3 + 4). The associative property of multiplication tells us that we can multiply a group of numbers in any order, and the result will be the same. For example, (2 × 3) × 4 is the same as 2 × (3 × 4).

However, the associative property does not work with subtraction and division. For example, (10 - 3) - 2 is not the same as 10 - (3 - 2). Similarly, (12 ÷ 2) ÷ 3 is not the same as 12 ÷ (2 ÷ 3). Therefore, the correct answer to the question is D - the associative property works with expressions that use multiplication and addition.

To know more about associative property:

https://brainly.com/question/30111262

#SPJ4

The cost to ship a box containing 5 laptops, weighing a total of 11 kg (including the empty box), is $58.90, with a cost of $40.00 for the first 5 kg and $3.15 for each additional kilogram.

The total mass of the packed shipping box can be found by adding the mass of the laptops (5 * 1.65 kg = 8.25 kg) to the mass of the empty box (2.75 kg) for a total mass of 11 kg.

Since the cost to ship the box is $40.00 for the first 5 kg and $3.15 for each additional kilogram over 5 kg, we can split the total mass into two parts: the first 5 kg and the additional weight above 5 kg.

The cost to ship the first 5 kg is $40.00, and the remaining weight is 11 kg - 5 kg = 6 kg.

The cost to ship the additional 6 kg is $3.15 per kilogram, so the total cost to ship the packed box is:

$40.00 + $3.15 * 6 kg = $58.90

Therefore, the cost to ship the packed box is $58.90.

To know more about Cost of shipping:

https://brainly.com/question/29364736

#SPJ4

In linear equation, 0.76  will purchase one or more costumes as a decimal to the nearest hundredth.

What in mathematics is a linear equation?

An algebraic equation with simply a constant and a first-order (linear) term, such as y=mx+b, where m is the slope and b is the y-intercept, is known as a linear equation.

                                 The variables in the previous sentence, y and x, are referred to as a "linear equation with two variables" at times. Equations with variables of power 1 are referred to as linear equations. One example with only one variable is where ax+b = 0, where a and b are real values and x is the variable.

from the given information

  the probability that the next person will purchase one or more costumes

                   = 288 + 13/288 + 13 + 95

                   ≈ 0.76

Learn more about Linear equations

brainly.com/question/11897796

#SPJ1

Answer:

Paper clip, Mobile phone, S​, Tennis racket, Car, Football pitch.

Answer:

120°

Step-by-step explanation:

We know that the exterior angle of a triangle is equal to the sum of the interior opposite angles.

Let the unknown angle be x.

Accordingly,

70° + 50° = x

120° = x

Given that the perimeter of the square base is 32 cm, The surface area of the square pyramid is 304 cm².

The surface area of a square pyramid can be calculated using the formula: SA = B + (1/2)Pl, where B is the area of the base, P is the perimeter of the base, l is the slant height, and SA is the total surface area.

Given that the perimeter of the square base is 32 cm, we can divide it by 4 to find the length of each side: 32 cm / 4 = 8 cm.

Now, we can calculate the area of the base by squaring the length of a side: B = (8 cm)² = 64 cm²

Using the given slant height of 15 cm, we can plug in the values into the formula for SA: SA = 64 cm² + (1/2)(32 cm)(15 cm) = 64 cm² + 240 cm² = 304 cm².

Therefore, the surface area of the square pyramid is 304 cm².

Learn more about the Surface Area of a Square:

https://brainly.com/question/22744289
#SPJ4

The answer based on debt to assets ratio for east and west company are,

East company debt to assets ratio is equal to 0.44.

West company debt to assets ratio is equal to 0.28.

After comparing both the company debt to assets ratio East company is at higher level of financial risk.

Assets = Liabilities + Equity

For East company,

206,000 =  91,000 + 115,000

Assets = 206,000

liabilities = 91,000

Equity = 115,000

For West company,

603,000 =  169,000 + 434,000

Assets = 603,000

liabilities = 169,000

Equity = 434,000

Debt-to-assets ratio = Total liabilities divided by the total assets.

Debt-to-assets ratio for East

= 91,000 / 206,000

= 0.44

Debt-to-assets ratio for West

= 169,000 / 603,000

= 0.28

Comparing the two ratios,

0.44 > 0.28

This implies,

Company East has a higher debt-to-assets ratio is greater than the compared to Company West.

This represents that Company East has a higher level of financial risk.

As larger proportion of their assets are financed through debt.

This shows it is difficult to repay if the company experiences financial difficulties.

Company West has a lower level of financial risk as smaller proportion of their assets are financed through debt.

Therefore, the answer of the following questions are,

Debt to asset ratio of east company = 0.44

Debt to asset ratio of west company = 0.28

Company east has a higher financial risk level .

learn more about debt to asset ratio here

https://brainly.com/question/18648883

#SPJ4