in general, the first step in conducting exploratory research is to group of answer choices assemble a focus group. perform an experience survey. conduct a literature search. perform an analysis of selected cases. narrow a group of hypotheses to one specific hypothesis for investigation.

In the following question, A linear system is ill-conditioned if its solution is highly sensitive to small changes in the problem data is said to be True.

What is a linear system? In mathematics, a linear system refers to a system of linear equations that can be expressed in matrix form as Ax = b. A is a matrix, x is a vector, and b is a constant vector. When working with linear systems, we must keep track of the numerical accuracy of the computations. When a small change in the matrix or constant vector produces a large change in the solution, the matrix is said to be ill-conditioned.

The mathematical concept of condition numbers measures the sensitivity of a matrix to changes in the problem data. If a matrix has a high condition number, it is said to be ill-conditioned, whereas if it has a low condition number, it is said to be well-conditioned. An ill-conditioned matrix is difficult to solve numerically because a small error in the input data can produce a large error in the computed solution.

Therefore, the statement that "a linear system is ill-conditioned if its solution is highly sensitive to small changes in the problem data" is correct, and it is true.

For more such questions on linear system

https://brainly.com/question/2030026

#SPJ11


From the given information provided, the surface area and volume of cylinder is 1130.97 and 3816.85 respectively.

To find the surface area and volume of the cylinder, we can use the following formulas:

Surface Area = 2πr² + 2πrh

Volume = πr²h

Substituting the given values, we get:

Surface Area = 2π(9)² + 2π(9)(15) = 1130.97 square inches (rounded to the nearest tenth)

Volume = π(9)²(15) = 3816.85 cubic inches (rounded to the nearest tenth)

Therefore, the surface area of the cylinder is approximately 1130.97 square inches, and the volume is approximately 3816.85 cubic inches, both rounded to the nearest tenth.

Question - A cylinder has a height of 15 in and a radius of 9 in. Find area and volume. Round to the nearest tenth.

Learn more about volume here: brainly.com/question/12410983

#SPJ4

Scale Factor is equal to [tex]\frac{2}{3}[/tex]. Length of EH is equal to 16 units and length of AB is equal to 9.

4. A scale factor is the ratio of the scales of an original object and a new object.

Scale factor = Ordinated dimension / original dimension

Scale factor = [tex]\frac{10}{15}[/tex]

Scale factor = [tex]\frac{2}{3}[/tex]  (or) 0.67

5. Length of EH

Scale factor = [tex]\frac{EH}{AD}[/tex]

[tex]\frac{EH}{AD}[/tex] = [tex]\frac{2}{3}[/tex]

[tex]\frac{EH}{24} = \frac{2}{3}[/tex]

EH = 2 * 8

EH = 16 units

6. Length of AB

Scale factor = [tex]\frac{EF}{AB}[/tex]

[tex]\frac{EF}{AB}[/tex] = [tex]\frac{2}{3}[/tex]

[tex]\frac{6}{AB} = \frac{2}{3}[/tex]

AB = 3 * 3

AB = 9 units.

Therefore, Scale Factor is equal to [tex]\frac{2}{3}[/tex]. Length of EH is equal to 16 units and length of AB is equal to 9.

Learn more about Scale Factor:

https://brainly.com/question/30215119

#SPJ1

so, the BEST supported conclusion is option D: "A majority of visitors had a favorite attraction."

Percentage is a way of expressing a number as a fraction of 100. The symbol used to represent percentage is "%". For example, if we say that 75% of students passed a test, it means that 75 out of every 100 students passed the test.

To calculate a percentage, you can use the following formula:

[tex]percentage = (part/whole) * 100[/tex]

Here, "part" refers to the number that is being expressed as a percentage of the "whole" number. For example, if we want to find out what percentage of 80 is 20, we can use the formula as follows:

percentage = (20/80) x 100 = 25%

So, 20 is 25% of 80.

According to the results of the sample, 40% of the visitors responded that they had no favorite attraction, while the remaining 60% did have a favorite. Among those who had a favorite attraction, the percentages for each attraction were: 15% safari, 20% aquarium, and 25% panda bears. Therefore, no conclusion can be made about which attraction was the most popular among all visitors. However, it is possible to conclude that a majority of visitors (60%) had a favorite attraction, so the BEST supported conclusion is option D: "A majority of visitors had a favorite attraction."

To know more about percentage, visit

https://brainly.com/question/29306119

#SPJ1

Glenn orders the same drink every time. This can be answered by the Simple intelligence.

The logic behind this conclusion is as follows:

Brian orders tea: In this case, John must order the same drink as Glenn. According to statement 4, if Brian orders tea, John orders the drink that Glenn orders. However, Glenn's choice is not dependent on Brian's choice, so Glenn will always order the same drink. Therefore, Glenn is the only person who orders the same drink every time.

Therefore, Glenn orders the same drink every time.

To learn more about Simple intelligence here:

brainly.com/question/9691088#

#SPJ11

At alpha equal to 0.01 there is enough evidence to reject the claim that is the chance of a false positive.

When reducing the alpha from 0.05 to 0.01 reduces the chance of a false positive also called a Type I error, it makes it harder to detect differences with a t-test and with any significant results one might obtain would be more trustworthy but there would probably be less of them.

We know that:

probability > 0.1: no evidence,

then, probability between 0.05 and 0.1: weak evidence

then, probability between 0.01 and 0.05: evidence

then, probability between 0.001 and 0.01: strong evidence

and probability < 0.001: very strong evidence

The alpha level set relates to the formal decision made rather than this informal interpretation, but both can be reported together.

Lower alpha levels are sometimes used while carrying out multiple tests at the same time and a common approach is to divide the alpha level by the number of tests being carried out.

To learn more about probability, click here:

brainly.com/question/30034780

#SPJ4

Answer:

the amswer is five apples

a) The degree of freedom for a sample size 25 is equals to the 24 and the critical value t* for 80% confidence interval and degree of freedom 24 is equals to 1.318.

b) The degree of freedom for a sample size 55 is equals to the 54 and the critical value t* for 98% confidence interval and degree of freedom 54 is equals to 2.403.

The t-distribution has a bell-shaped density curve but has more variance (spread) than a normal bell curve.

Step 1: First express the confidence level as a number (in decimal) c with 0<c<1.

Step 2: Determine the significance level, denoted

α, by α = 1 − c.

Step 3: Use the t-distribution table to obtain the t-score (critical value) tα/2 where (i) the α is from Step 2 and (ii) the degrees of freedom equals n−1, where n is the sample size.

a) 80% of confidence interval and observation of

Sample size, n = 25

From above definition, degree of freedom= n - 1 = 25 - 1 = 24 and c = 80%

= 0.80

Significance level, α = 1- c = 1 - 0.80 = 0.20

and α/2 = 0.10 then use the t-table the critical t-value for this 80% confidence interval, t₀.₁₀ = 1.711.

b) 98% confidence interval with 55 observations. So, Sample size, n = 55

degree of freedom = n - 1 = 55 - 1 = 54,

c = 98% = 0.98

Significance level, α = 1-0.98 = 0.02

and α/2 = 0.01, then use the t-table the critical t-value for this 98% confidence interval, t₀.₀₁ = 2.669

Hence required value is 2.669.

For more information about critical t-value, visit :

https://brainly.com/question/27192813

#SPJ4

Answer:

The constraints are:

Plot the graphs of the constraints

From the graph (see attachment), the only optimal point is (3,4)

Substitute 3 for x and 4 for y in the objective function.

So, we have:

Hence, the maximum value of C is 17

Step-by-step explanation: Hope this helps!!!

The function f(x) = sec(x) has no x-intercepts.

The y-intercept of the graph of f(x) = sec(x) is (0, 1).

From the question, we are to identify any x-intercepts and y-intercepts of the graph of f(x) = sec(x).

The function f(x) = sec(x) is defined as the reciprocal of the cosine function, that is:

f(x) = 1 / cos(x)

The cosine function has a zero at x = π/2 + nπ, where n is an integer.

At these values of x, the denominator of the secant function becomes zero, and the function becomes undefined.

Therefore, the function f(x) = sec(x) has no x-intercepts.

To find the y-intercept, we need to evaluate the function at x = 0, which gives:

f(0) = 1 / cos(0) = 1 / 1 = 1

Hence, the y-intercept of the graph of f(x) = sec(x) is (0, 1).

The graph of the function f(x) = sec(x) is shown below.

Learn more on Graph of a Trigonometric function here: https://brainly.com/question/31249124

#SPJ1

The equation of the circle is with the diameter given is x² + y² = 9.

The standard form of the equation of a circle is (x - h)² + (y - k)² = r², where (h,k) is the center of the circle.

We can quickly determine the circle's centre and radius thanks to this form. We must first square the x and y terms before rearranging the components in order to transform a circular equation into standard form.

The endpoints of the diameter is (-3,0) and (3,0).

Now, using the section formula the coordinates of radius are:

((-3+3)/2, (0+0)/2) = (0,0

The standard form of the equation of a circle is (x - h)² + (y - k)² = r², where (h,k) is the center of the circle.

Substituting the values:

(x - 0)² + (y - 0)² = 3²

Hence, the equation of the circle is x² + y² = 9.

Learn more about equation of circle here:

https://brainly.com/question/23799314

#SPJ1

The given statement "if we take a simple random sample from a normal distribution, the probability that the sample mean is equal to the population mean is 1 (i.e., 100%)" is false.

The probability that a sample mean is equal to the population mean is actually zero, since any given sample will differ slightly from the population mean due to sampling error. However, as the sample size increases, the sample mean is likely to be close to the population mean, and the probability of it being equal approaches 1 (i.e., 100%).

To explain further, the population mean is the mean of the entire population and is calculated by adding up all the values of the population and dividing them by the total number of individuals in the population. A sample mean, on the other hand, is the mean of a sample taken from the population and can be calculated by adding up the values of the sample and dividing them by the total number of individuals in the sample. Since the sample size is usually smaller than the population size, the sample mean is likely to be slightly different from the population mean due to sampling error.

For more such questions on Probability.

https://brainly.com/question/30653447#

#SPJ11

The mean retirement age in the census report is 68.3 years.

The given information states that the population mean retirement age is 68.3 years, and a random sample of retirement age has a sample mean of 65.8 years. We can use this information to estimate the population mean with a certain level of confidence.

However, the question asks us to find the mean of 68.3 years, which is simply the given population mean. Therefore, we can state that the mean of 68.3 years remains the same, as it is not affected by the sample mean or any other sample statistic.

In other words, the population mean of 68.3 years is a fixed value, and it does not change based on the sample mean or any other sample statistic. Therefore, we can simply state that the mean retirement age is 68.3 years, which is the given information provided in the question.

You can learn more about random sample at

https://brainly.com/question/29348144

#SPJ11

The patient needs to take 4 tablets daily to receive the prescribed dose of 3 grams of the drug.

To determine how many tablets the patient needs to take daily, we need to divide the total amount of the drug prescribed by the dose of each tablet.

Since the patient is prescribed 3 grams of the drug daily, we first need to convert this to milligrams (mg), as the tablets are available in milligram form.

1 gram = 1000 milligrams, so 3 grams = 3,000 milligrams

The pharmacist has 750 mg tablets available, so we can calculate the number of tablets the patient needs to take daily by dividing the prescribed dose by the dose of each tablet:

Number of tablets = Prescribed dose ÷ Dose per tablet

Number of tablets = 3,000 mg ÷ 750 mg

Number of tablets = 4

Therefore, the patient needs to take 4 tablets daily to receive the prescribed dose of 3 grams of the drug.

Therefore, the patient will take 4 tablets daily.

Learn more about  medication dosage calculation:https://brainly.com/question/24793154

#SPJ11

The given angles and measures is given below:

In mathematics and geometry, an angle is a measure of the space between two intersecting lines, rays, or line segments, usually expressed in degrees, radians, or grads. It is the measure of the opening between two lines that intersect at a common point, called the vertex of the angle.

5) tan x = 153 / 41

x = tan^-1 ( 153 / 41 )

75 degrees

6) tan y = 25/25

y = tan^-1 ( 25/25 )

45 degrees

7) sin z = 10/28

z= sin^-1 ( 10/28 )

21 degrees

8) cos a = 47/50

a = cos^-1( 47/50)

20 degrees

Read more about angles here:

https://brainly.com/question/25716982

#SPJ1

The probability of drawing a second card as an ace after drawing one card and putting it aside without looking at it depends on the outcome of the first draw and whether the card was replaced or not.

The possibility of drawing an ace from a general deck of 52 playing cards is 4/52, or 1/13. But, the probability of drawing an ace as the second card relies upon whether or not the first card drawn turned into an ace or now not, in addition to whether the first card was replaced lower back into the deck or no longer.

If the primary card becomes an ace and it was now not replaced, then there are only three aces left inside the deck out of fifty-one cards, so the opportunity of drawing another ace as the second card could be 3/51.

However, if the primary card becomes an ace and it is turned into changed, then the opportunity of drawing any other ace as the second one card would nonetheless be 4/52, or 1/13 because the deck could be efficiently reset.

Then again, if the primary card was now not an ace, then there might be 4 aces left inside the deck out of fifty-one cards. Consequently, the opportunity of drawing an ace as the second card could be 4/51.

In precis, the opportunity of drawing a 2nd ace from a well-known deck of cards could rely on the outcome of the primary draw and whether the cardboard was replaced or no longer.

Learn more about probability at

brainly.com/question/30034780

#SPJ4

There are 56 different health-care plans to choose from if one plan is selected from each category.

To calculate the total number of different health-care plans, we need to multiply the number of options in each category.

Number of basic health plans = 7

Number of dental plans = 4

Number of vision care plans = 2

Using the multiplication principle of counting, the total number of different health-care plans is:

7 x 4 x 2 = 56

Therefore, there are 56 different health-care plans to choose from if one plan is selected from each category.

Learn more about Multiplication Principle:

https://brainly.com/question/3618797
#SPJ4

The transformation performed on f(x) = x² to create h(x) = 1/5f(x) is the graph is compressed horizontally by the factor 1/5

Transformations are mathematical operations performed on a graph or function to change the shape, size or orientation of the graph or function.

Given that we have the function f(x) = x² and it is transformed into the graph h(x) = 1/5f(x).

So, the graph is  compressed horizontally by the factor 1/5

Learn more about transformation here:

https://brainly.com/question/28025572

#SPJ1

Increasing the sample size leads to a more accurate estimation of the population mean.

What is Probability ?

Probability can be defined as ratio of number of favourable outcomes and total number outcomes.

As the sample size, n, increases, the center of the sampling distribution of sample means becomes more precise and closer to the true population mean. This is known as the central limit theorem, which states that as the sample size increases, the distribution of sample means becomes approximately normal with a mean equal to the population mean and a standard deviation equal to the population standard deviation divided by the square root of the sample size.

In other words, as we take larger and larger samples, we are more likely to obtain sample means that are closer to the true population mean. This is because larger samples are less affected by random fluctuations and more likely to provide a representative picture of the population as a whole.

Therefore, increasing the sample size leads to a more accurate estimation of the population mean.

To learn more about Probability from given link.

brainly.com/question/30034780

#SPJ1

The measure of angle ACD is approximately 109.5 degrees.

What are parallel lines ?

Parallel lines can be defined in which the lines which are equidistant to each other and they never intersect.

To solve for m<ACD, we can use the fact that the sum of the angles in a triangle is 180 degrees.

We can start by finding the measure of angle ACD, which is opposite to the known side length of 10 units. Using the Law of Cosines, we have:

cos(ACD) = (AD * AD + CD * CD - 100) / (2 * AD * CD)

We know that AD = 8 units and CD = 6 units, so plugging in these values, we get:

cos(ACD) = (64 + 36 - 100) / (2 * 8 * 6) = -1/3

Since -1/3 is negative, we know that angle ACD is obtuse, meaning it measures between 90 and 180 degrees. Therefore, we can take the inverse cosine of -1/3 to find its measure:

cos(ACD) = (-1/3) ≈ 109.5 degrees

Therefore, the measure of angle ACD is approximately 109.5 degrees.

To learn more about Parallel lines from given link.

https://brainly.com/question/29762825

#SPJ1

So the coordinates of point X' after dilation are (15, 11).

Polygon WXYZ is dilated by a scale factor of 3, with vertex W as the center of dilation. This means that the distances from vertex W to the other vertices are multiplied by 3, while W remains unchanged. Given the coordinates of point W are (3,2) and point X are (7,5), we can find the coordinates of point X' after dilation.

To do this, first determine the change in the x and y coordinates from point W to point X:

Δx =[tex]7 - 3 = 4\\[/tex]
Δy =[tex] 5 - 2 = 3[/tex]

Now multiply these changes by the scale factor of 3:

Δx' =[tex] 4 * 3 = 12[/tex]
Δy' =[tex] 3 * 3 = 9[/tex]

Now add these new changes to the original coordinates of point W to get the coordinates of point X':

X'(x) =[tex] W(x) + Δx' = 3 + 12 = 15[/tex]
X'(y) = [tex]W(y) + Δy' = 2 + 9 = 11[/tex]

for such more questions on original coordinates

https://brainly.com/question/22235711

#SPJ11

Answer:

Part A:

Assuming that Morgan kicks the ball at an angle that will allow it to clear the crossbar, we can use the following formula to determine how far she must kick the ball:

Distance = Height / tan(θ)

where θ is the angle at which the ball is kicked.

Since the field goal is 16 feet off the ground and we want the ball to clear the crossbar, we can assume that Morgan needs to kick the ball at an angle of approximately 45 degrees. Therefore, plugging in the given values, we get:

Distance = 16 / tan(45)

Simplifying the equation, we get:

Distance = 16 / 1

Therefore, Morgan must kick the ball a distance of 16 feet to make the extra point if she stands 30 feet from the field goal.

Part B:

To arrive at this conclusion, we used the formula for the distance of a projectile when given the initial velocity, angle, and height of the object. However, since we were not given the initial velocity, we assumed that Morgan would need to kick the ball at an angle of approximately 45 degrees to clear the crossbar. This is a common assumption in football, as it allows for the ball to travel the farthest distance possible while still clearing the crossbar. Additionally, we assumed that there was no wind or other external factors that could affect the trajectory of the ball. With these assumptions, we were able to determine that Morgan would need to kick the ball a distance of 16 feet to make the extra point if she stood 30 feet from the field goal.

Using the identity sin² 0 + cos² 0 = 1, the value of cos 0 is 0.951 (to the nearest hundredth)

Using the identity sin² 0 + cos² 0 = 1, we can solve for cos 0:

cos² 0 = 1 - sin² 0

cos² 0 = 1 - (-0.31)²

cos² 0 = 1 - 0.0961

cos² 0 = 0.9039

Taking the square root of both sides, we get:

cos 0 ≈ ±0.951

Since 0 is in the interval ³ < 0 < 2π, we know that cos 0 must be positive. Therefore, to the nearest hundredth, cos 0 ≈ 0.95.

Learn more about interval at https://brainly.com/question/479532

#SPJ1

It would be: D) Increased recycling of waste

Your Welcome

The distance between the intersection and the bank is equal to 77.0 feet.

In Mathematics, two (2) triangles are said to be similar when the ratio of their corresponding side lengths are equal and their corresponding angles are congruent.

Additionally, the lengths of corresponding sides are proportional to the  lengths of corresponding altitudes when two (2) triangles are similar.

Note: Let the distance between the intersection and the bank be represented by the variable x.

By applying the properties of similar triangles, we have the following ratio of corresponding side lengths;

x/50 = 382/248

248x = 382(50)

x = 19,100/248

x = 77.0 feet.

Read more on triangle here: brainly.com/question/22891315

#SPJ1

Complete Question:

The intersection of the two roads shown forms two similar triangles. If AC is 382 feet, MP is 248 feet, and the gas station is 50 feet from the intersection, how far from the intersection is the bank?

Answer:

b = 12 units

Step-by-step explanation:

In a right angled triangle,

Base² + Perpendicular² = Hypotenuse²

b² + 16² = 20²

b² = 20² - 16²

b² = 400 - 256

b² = 144

b = √144

b = 12 units

Probability sampling procedures are instances where every unit in the population has a non-zero chance of being selected. (Option a)

Probability sampling is a type of sampling method used in statistical analysis, where each member of the population has a known and equal probability of being selected. This means that every possible unit in the population has a non-zero chance of being selected for the sample.

Probability sampling methods include simple random sampling, systematic sampling, stratified sampling, and cluster sampling. These methods are typically used when population parameters are unknown or when the researcher wants to make generalizations about the population based on the sample data.

Learn more about Probability Sampling:

https://brainly.com/question/28016369
#SPJ4

Answer:

88

Step-by-step explanation:

^9199eoijdfwieufhiqehgfb

No, the lines cannot ever match up perfectly because there is always some sort of difference between them. The lines can have the same slope if they have the same change in y-values for a given change in x-values. The lines can also have the same y-intercept if they cross the y-axis at the same point.

No, there will never be a perfect alignment between the lines since there will always be a discrepancy of some kind. However, the lines can have the same slope and y-intercept. This is possible because the slope and y-intercept are determined by the equation of the line, and if two lines have the same equation, then they will have the same slope and y-intercept.

If the lines intersect the y-axis at the same location, they can also have the same y-intercept. This means that the two lines have the same value of b in the equation y = mx + b. This means that the two lines have the same slope and the same y-intercept.

To learn more about equation of the line link is here

brainly.com/question/21511618

#SPJ4