Yes, if you have minimums and maximums that are several standard deviations away from the rest of the data observations, medians would be the best measure of central tendency.
Having minimums and maximums that are far away (several standard deviations away from the mean) from the rest of the data observations, medians would be the best measure of central tendency. This is because, when there are outliers or extreme values in a dataset, the mean can be influenced and it may not be an accurate representation of the central tendency.
However, the median is not affected by extreme values or outliers since it only depends on the middle value of the dataset. Therefore, if the dataset has outliers, it is better to use the median as a measure of central tendency to provide a more accurate representation of the data.
To know more about the "standard deviations": https://brainly.com/question/475676
#SPJ11
if it is unstable, please change support at a to make stable structure. use the method of joints to calculate the force bd in the truss shown. question 2 (50 pts) find the forces in members cd and ce using the method of section. the support reactions have already been determined.
To make a stable structure, the method of joints can be used to calculate the force BD in the truss shown.
This method uses the equations of equilibrium to determine the forces in the members of a truss. To calculate the force BD, one needs to sum the moments about point A and equate them to zero.
The moment is given by M = FxD, where F is the force, and D is the perpendicular distance from the point of interest to the line of action of the force. Therefore, the force BD can be calculated using the equation:
MAB = 0 = (BD)(2) - (AE)(5)
BD = 5AE/2
To find the forces in members CD and CE using the method of sections, one needs to cut through the truss along a line passing through points C and E.
Then, the force in member CD can be found by using the equation of equilibrium, where the sum of the forces in the x-direction and the sum of the forces in the y-direction must be equal to zero. Similarly, the force in member CE can also be calculated using the same method.
To learn more about joints, refer below:
https://brainly.com/question/13441222
#SPJ11
surface-finish defects in a small electric appliance occur at random with a mean rate of 0.1 defects per unit. find the probability that a randomly selected unit will contain at least one surface-finish defect.
The probability that a randomly selected unit will contain at least one surface-finish defect is 0.0952.
The number of surface finish flaws in this issue will follow a Poisson distribution, and since the mean is given, it is necessary to obtain the probability. More solutions will be found by using the Poisson distribution's normal approximation.
The following formula can be used to determine the likelihood that a randomly chosen unit will have at least one surface finish flaw:
The distribution's average and standard deviation are λ = 0.1
P(X ≥ 1) = 1 − P(X < 1)
P(X ≥ 1) = 1 − P(X = 0)
P(X ≥ 1) = 1 − [tex]\frac{e^{-0.1}(0.1)^0}{0!}[/tex]
After simplification
P(X ≥ 1) = 0.0952
To learn more about Poisson distribution link is here
brainly.com/question/17280826
#SPJ4
For any acute angle A if sin A = 2x-1/2x+1, what is the value of cos A cot A?
The trigonometric expression cosAcotA = 8x/(4x² - 1)
What is a trigonometric expression?A trigonometric expression is an expression that contains trigonometric ratios.
Given that for any acute angle A if sin A = 2x-1/2x+1, we desire to find the value of cos A cot A?
So, we proceed as follows
cosAcotA = cosA × cosA/sinA (since cotA = cosA/sinA)
= cos²A/sinA
Now using the trigonometric identity
sin²A + cos²A = 1
⇒ cos²A = 1 - sin²A
So, substituting this into the equation, we have that
cosAcotA = cos²A/sinA
= (1 - sin²A)/sinA
= 1/sinA - sin²A/sinA
= 1/sinA - sinA
Substituting the value of sinA into the equation, we have
= 1/(2x - 1)/(2x + 1) - (2x - 1)/(2x + 1)
= (2x + 1)/(2x - 1) - (2x - 1)/(2x + 1)
Taking the L.C.M, (2x - 1)(2x + 1), we have
= [(2x + 1)² - (2x - 1)²]/[(2x - 1)(2x+ 1)]
= [(2x + 1)² - (2x - 1)²]/[(2x)² - 1²)]
= [(2x + 1 + 2x - 1)(2x + 1 - (2x - 1)]/(2x)² - 1²)
= [(2x + 1 + 2x - 1)(2x + 1 - 2x + 1)]/4x² - 1)
= [(4x)(2)]/4x² - 1)
= 8x/(4x² - 1)
So, cosAcotA = 8x/(4x² - 1)
Learn more about trigonometric expresion here:
https://brainly.com/question/29321762
#SPJ1
the mean gpa for 127 residents of the local apartment complex is 1.6 . what is the best point estimate for the mean gpa for all residents of the local apartment complex?
The best point estimate for the mean GPA for all residents of the local apartment complex would be 1.6.
Given, the mean GPA for the 127 residents of the local apartment complex is 1.6.
The mean or sample mean is used as a point estimate for the population mean or population parameter when the value of the mean of the sample is unbiased and accurately represents the mean of the population.
Here, we are given the mean GPA of 127 residents of the local apartment complex, which is 1.6.
Therefore, the best point estimate for the mean GPA for all residents of the local apartment complex would be 1.6.
To learn more about “mean GPA” refer to the https://brainly.com/question/1136789
#SPJ11
what is the slope of the line of best-fit in the scatterplot below?on a graph, a trend line goes through points (3, 12) and (6, 19).
The slope of the line of best fit in the scatterplot below can be determined using the formula for the slope of a line:
Slope = (y2-y1)/(x2-x1)
In this case, x1 = 3, y1 = 12, x2 = 6, y2 = 19. So, the slope of the line of best fit is (19 - 12) / (6 - 3), which equals 7/3 or 2.33.
The line of best fit is the line that best represents the data on a scatterplot. It is the line that is closest to all the data points in the graph. The slope of the line of best fit helps to indicate whether the data points are moving in a positive or negative direction. If the slope is positive, the data points are increasing, and if the slope is negative, the data points are decreasing.
A positive slope, like the one in this example, means that as x increases, y also increases. This means that in this case, as the x-values (3 and 6) increase, the y-values (12 and 19) also increase.
The slope of the line of best fit can also be used to make predictions about values of y, given values of x. For example, if x = 8, then y = 26, because the slope of the line of best fit is 2.33, and 8*2.33 = 19.8, which is approximately equal to 26.
Overall, the slope of the line of best fit on this scatterplot is 2.33, which is a positive number. This indicates that as the x-values increase, the y-values also increase, and it can also be used to make predictions about y-values, given x-values.
To know more about slope refer here:
https://brainly.com/question/3605446
#SPJ11
How do I find the length of the arc?
The length of the arc of circle with radius 13m and with angle of arc [tex]2\pi /3[/tex]would be 13.6 meters.
What is an arc?The part of a circle's circumference known as an arc.It is defined by two endpoints on the circle and the points that lie on the circle between these endpoints.
An arc can be measured by its length, angle, or other properties, and is often used in the calculation of the perimeter and area of a sector of a circle.
Arcs can also be part of other curves, such as ellipses or parabolas, but they are most commonly associated with circles.
To find the length of an arc, you need to know the radius of the circle and the measure of the central angle subtended by the arc.
Arc length = (central angle / 360 degrees) x (2 x pi x radius)
where pi is approximately equal to 3.14.
For example, if the radius is 13m and the central angle is 60 degrees, then the length of the arc would be:
Arc length = (60 / 360) x (2 x 3.14 x 13) = 13.6 meters.
To know more about central angle visit:
https://brainly.com/question/10945528
#SPJ1
Find the missing angle to the nearest degree.
You are offered a job that pays $34,000 during the first year, with an annual increase of 6% per year beginning in the second year. That is, beginning in year 2, your salary will be 1.06 times what it was in the previous year. What can you expect to earn in your fourth year on the job? Round your answer to the nearest dollar.
the length of a rectangle is nine inches more than its width. its area is 442 square inches. find the width and length of the rectangle.
If the length of a rectangle is nine inches more than its width and its area is 442 square inches, the width of the rectangle is 17 inches and its length is 26 inches.
Let's denote the width of the rectangle as "w" and its length as "l". From the problem statement, we know that:
l = w + 9 (since the length is nine inches more than the width)
The area of the rectangle is given by the formula:
A = l * w
Substituting in the expression for "l" in terms of "w", we get:
A = (w+9) * w
Simplifying, we get a quadratic equation:
w^2 + 9w - 442 = 0
We can solve this equation by factoring or using the quadratic formula. Factoring gives:
(w+26)(w-17) = 0
Therefore, the possible values for "w" are -26 and 17. However, since the width of the rectangle cannot be negative, we can eliminate -26 as a possible value. Thus, the width of the rectangle is 17 inches.
Using the expression for "l" in terms of "w", we can find the length:
l = w + 9 = 17 + 9 = 26 inches
To learn more about rectangle click on,
https://brainly.com/question/17253665
#SPJ4
which numbers in z84 are relatively prime to 84? enter your answer as a comma separated list of numbers.
The numbers in Z84 that are relatively prime to 84 are: 1, 5, 25, 29, 43, 47, 61, 65, 79, and 83.
To find the numbers in Z84 that are relatively prime to 84, we need to find the numbers that do not have any common factors with 84 other than 1.
First, we can factorize 84 as 2^2 * 3 * 7.
Next, we can remove all the factors of 2, 3, and 7 from the set Z84, since any number in Z84 that has any of these factors would have a common factor with 84 other than 1.
So, we are left with the set of numbers {1, 5, 25, 29, 43, 47, 61, 65, 79, 83}.
Therefore, the numbers in Z84 that are relatively prime to 84 are 1, 5, 25, 29, 43, 47, 61, 65, 79, and 83.
As a comma-separated list, the answer would be: 1, 5, 25, 29, 43, 47, 61, 65, 79, 83.
To know more about relatively prime refer here:
https://brainly.com/question/28044613#
#SPJ11
HELP PLEASE ASAP!!! Sarah needs to design two boxes for a science project. The width of Box A will be 4 inches more than its length.
The height of Box A will be 1 inch less than its length. Box B will have a length twice as long as Box A. The width of Box B will be 2 inches less than half its length. Box B will also have a height 2 inches more than half its length. For what length does the volume of Box A equal the volume of Box B?
A. x=4 inches
B. x = 5 inches
C. x= 1 inch
D. x=3 inches
Answer: Option A: x=4
In 1962, an automobile worker was paid an annual salary of $8,400. Each year the worker's pay went up by 5% of the previous year's salary. What is the total amount that the worker will have earned from the beginning of 1962 through the end of 1980?
the worker will have earned $231,584.10 from the period of beginning 1962 through the end 1980.
To solve this problem, we can use the formula for the sum of a geometric series:
S = a(1 - rⁿ)/(1 - r)
where S is the sum of the series, a is the first term, r is the common ratio, and n is the number of terms.
In this case, the first term is $8,400 and the common ratio is 1.05 (since the worker's salary increases by 5% each year). We need to find the sum of the series from 1962 to 1980, which is 19 years. So, the total amount that the worker will have earned from the beginning of 1962 through the end of 1980 is:
S = 8,400(1 - 1.05¹⁹)/(1 - 1.05)
S ≈ $231,584.10
Therefore, the worker will have earned approximately $231,584.10 during this period.
To learn more about geometric series click here
brainly.com/question/4617980
#SPJ4
. determine the value of x (namely, the smallest natural number that makes the statement true) and prove the claim using strong induction. claim: every amount of postage of 12 cents or more can be formed using just 4-cent and 5-cent stamps
Answer:
Step-by-step explanation:
fsffd
What number is not part of the solution set to the inequality below? w-10<16
Answer:
27..
Step-by-step explanation:
w - 10 ≤ 16
w - 10 + 10 ≤ 16 + 10
w ≤ 26
all apply except 27.
3. Mr. Mohan donated 8 five-litre bottles of water for the school's annual walkathon. There are two
water stops during the walkathon. Cups, each containing 125 ml of water, are filled from the five-
litre bottles. Each of the 200 participants takes one cup of water at each water stop. How many
participants will not get two cups of water if Mr. Mohan is the only person who donated water?
The number of participants that will not get two cups of water if Mr. Mohan is the only person that donated water, obtained using basic arithmetic operations are 40 participants
What are basic arithmetic operations?Basic arithmetic operations includes addition, subtraction, division and multiplication.
Mr. Mohan donated 8 five-litre bottles of water, which is equivalent to 40 litres of water;
8 × 5 litres = 40 litres
Each cup contains 125 ml of water which means that each liter can fill 8 cups. So the total number of cups that can be filled from the 8 five-litre bottles of water containing 40 litres of water is; 40 × 8 = 320 cups
Since each participant takes one cup at each stop and there are two stops in total, each participant will take a total of 2 cups during the walkation. This means that only 160 participants will get two cups of water if Mr Mohan is the only person who donated water.
So, 200 - 160 = '40 participants' will not get two cups of water if Mr. Mohan is the only person who donated water.
Learn more on arithmetic operations here: https://brainly.com/question/31007191
#SPJ1
In 2010, a total of 2187 of the employees
at Leo's company owned a petrol car.
In 2013, there were 1536 employees with
petrol cars.
Assuming this number decreases
exponentially, work out how many
employees owned a petrol car in 2019.
Give your answer to the nearest integer.
Answer:
We can use exponential decay formula to solve this problem:
N(t) = N0 * e^(-kt)
where N(t) is the number of employees with petrol cars at time t, N0 is the initial number of employees with petrol cars (in 2013), k is the decay constant, and e is the base of the natural logarithm.
We need to find N(2019), the number of employees with petrol cars in 2019. We know that N0 = 1536, and we need to find k.
Let's assume that the number of employees with petrol cars decreases by 5% each year. This means that the ratio of the number of employees with petrol cars in two consecutive years is:
0.95
Therefore, we can write:
N(2019) = 1536 * 0.95^(2019-2013)
N(2019) = 1536 * 0.95^6
N(2019) = 1133.76
Rounding to the nearest integer, we get:
N(2019) = 1134
Therefore, we can estimate that about 1134 employees owned a petrol car in 2019, assuming that the number of employees with petrol cars decreases exponentially at a rate of 5% per year.
Find the least common denominator of 7/9 and 2/3
The least common denominator of 7/9 and 2/3 is 9
To find the least common denominator of 7/9 and 2/3, we need to find the smallest multiple that both denominators share.
The multiples of 9 are: 9, 18, 27, 36, 45, 54, 63, ...
The multiples of 3 are: 3, 6, 9, 12, 15, 18, 21, 24, 27, 30, ...
We can see that the smallest multiple that both denominators share is 9.
To convert 7/9 and 2/3 to have a denominator of 9, we need to multiply the numerator and denominator of 7/9 by 1 (which is equivalent to 9/9), and the numerator and denominator of 2/3 by 3:
7/9 * 1 = 7/9
2/3 * 3/3 = 6/9
Now both fractions have a denominator of 9, so we can compare them easily:
7/9 and 6/9
Therefore, the least common denominator of 7/9 and 2/3 is 9.
Learn more about least common denominator at https://brainly.com/question/19249494
#SPJ1
what percentage of known edible plants is cultivated or collected by humans for food? find that number on the infographic and divide by the total number of terrestrial plants known to be edible. (round your answer to the nearest whole number.)
The percentage of known edible plants is cultivated or collected by humans for food : 23%
We need to find the percentage of known edible plants is cultivated or collected by humans for food.
From the infographic, the number of known edible plants are 30,000
and the total number of terrestrial plants known to be edible is about 130000
We know that the percenage of 'x' out of 'n' is given by formula,
p = (x / n) × 100%
here, x = 30,000 and n = 130000
Using above formula of percentage:
p = (30,000/130000) × 100%
p ≈ 23%
the required percentage is: 23%
Learn more about the percentage here:
https://brainly.com/question/16797504
#SPJ4
The complete question is:
What percentage of known edible plants is cultivated or collected by humans for food? Find that number on the infographic and divide by the total number of terrestrial plants known to be edible. (Round your answer to the nearest whole number.)
The graph below shows a company's profit f(x), in dollars, depending on the price of goods x, in dollars, being sold by the company:
f(x)
150
120
Part A: What do the x-intercepts and maximum value of the graph represent in context of the described situation?
Part B: What are the intervals where the function is increasing and decreasing, and what do they represent about the sale and profit for the company in the situation
described?
Part C: What is an approximate average rate of change of the graph from x= 1 to x= 3, and what does this rate represent in context of the described situation?
The vertical axis of the graph represents profit, so the x-intercepts represent prices in the produce 0 profit. The maximum value of the graph is the maximum profit that can be obtained for anyprice
How to explain the graphThe higher or largest number of the chart is the maximum reach
B) We read the value of f(1) from the graph to be about 120, so the average rate of change is about:
(f(4) -f(1))/(4 -1) = (270 -120)/(3) = 50
The average rate of the change from x = 1 to x = 4 is about 50.* This means profit will increase on average $50 for each $1 increase in price in what interval.
If we take the peak profit to be $270 we can write f(x) as:
f(x) 16.875x(x-8)
Then f(1) = 118.15 and average rate of change is 50.625.
Learn more about graph on;
https://brainly.com/question/25184007
#SPJ1
the slope of a street is 0.54. if it covers 28m of horizontal distance, what is the rise of the street?
Answer: i believe its 15.12
Step-by-step explanation:
How many hours after the chemical reaction starts are the concentrations of the two products equal?
Responses
0.6
1.0
1.5
2.0
Answer:0.6
Step-by-step explanation: because i got it correct
what is meant by a random variable, explain the difference between a discrete random variable and a continuous random variable
A random variable is a variable whose possible values are determined by chance, while a discrete random variable can only take on certain values, and a continuous random variable can take on any value within a given range
There are two types of random variables: discrete random variables and continuous random variables.
The difference between these two types of random variables is as follows:
Discrete random variables: A discrete random variable is one that can only take on a finite or countably infinite number of distinct values. These values are usually represented by integers.
Examples of discrete random variables include the number of students in a class, the number of cars in a parking lot, or the number of heads that come up when a coin is flipped. In other words, a discrete random variable is one that can be counted.
Continuous random variables: A continuous random variable is one that can take on an infinite number of values, and these values can be represented by any real number within a given interval.
Examples of continuous random variables include height, weight, temperature, and time. In other words, a continuous random variable is one that can be measured.
Continuous random variables are usually represented by a function called the probability density function, which describes the likelihood of any given value occurring within the given interval.
To know more about random variables, refer here:
https://brainly.com/question/17238189#
#SPJ11
The maximum acceleration attained on the interval 0 < t <3 by the particle whose velocity is given by v(t) = t3-3t2 + 12t+4 is f(x)=3x²-6x. 0=3x(x-2).
The maximum acceleration attained on the interval 0 < t <3 is 27 m/s²
To find the maximum acceleration of the particle, we need to find its acceleration function by taking the derivative of its velocity function with respect to time
a(t) = v'(t) = 3t^2 - 6t + 12
To find the maximum acceleration attained on the interval 0 < t <3, we need to find the critical points of the acceleration function within the interval and evaluate the function at these points and at the endpoints of the interval.
The critical points of the acceleration function occur where its derivative equals zero
a'(t) = 6t - 6 = 0
t = 1
So the only critical point of the acceleration function within the interval 0 < t <3 is t=1. We also need to evaluate the acceleration function at the endpoints of the interval
a(0) = 12
a(3) = 27
Therefore, the maximum acceleration attained on the interval 0 < t <3 is either at t=0, t=1, or t=3. To determine which one is the maximum, we can evaluate the acceleration function at each of these points and compare the values
a(0) = 12
a(1) = 9
a(3) = 27
Thus, the maximum acceleration attained on the interval 0 < t <3 is 27m/s², which occurs at t=3.
Learn more about maximum acceleration here
brainly.com/question/29529407
#SPJ4
what is the probability of getting a tail on the coin and at least a 5 on the die? round your answer to four decimal places, if necessary.
The probability of getting a tail on the coin and at least a 5 on the die is 0.1667 rounded to four decimal places.
How are probabilities determined?The probability is frequently stated as a ratio between the total number of outcomes in the sample space and the number of positive outcomes. This is how it is written: Number of Favorable Outcomes P(E) = Probability of an Event (Sample space).
If a coin is fair and impartial, the likelihood of getting a tail is equal to half.
On a six-sided dice, the likelihood of getting at least a 5 is 2/6, or 1/3. Either rolling a 5 or rolling a 6 will result in a 5 or a 6 on the die. The likelihood of rolling at least a 5 is 2/6 or 1/3 because there are a total of six possible results.
You can multiply the probabilities of the two occurrences to determine the likelihood that they will occur simultaneously (assumed to be independent events). As a result, the likelihood of getting at least a 5 on the die and a tail on the coin is:
1/2 * 1/3 = 1/6
Thus, there is a 1 in 6 possibility of rolling at least a 5 on the die and getting a tail on the coin in a single trial. Another way to say this is as a percentage:
1/6 * 100% = 16.67%
Thus, rounded to four decimal places, the likelihood of receiving a tail on the coin and at least a 5 on the die is 0.1667.
To know more about probability visit:
https://brainly.com/question/30719832
#SPJ1
two 99 percent confidence intervals will be constructed to estimate the difference in means of two populations, r and w. one confidence interval, i9 , will be constructed using samples of size 9 from each of r and w, and the other confidence interval, i81 , will be constructed using samples of size 81 from each of r and w. when all other things remain the same, which of the following describes the relationship between the two confidence intervals?A The width of Ig1 will be the width of Ig. B The width of 1x1 will be the width of Ig. C The width of 181 will be equal to the width of Ig. D The width of 181 will be 3 times the width of Ig. E The width of 181 will be 9 times the width of Ig.
The relationship between the two confidence intervals will be that the width of i81 will be 3 times the width of i9. So, the correct answer is option D.
What are confidence intervals?In statistics, a confidence interval is a range of values that is used to estimate the unknown population parameter. They are used to express the degree of uncertainty associated with a sample estimate of a population parameter.
Two 99 percent confidence intervals are going to be constructed to estimate the difference in means of two populations, r and w. One confidence interval, i9, is going to be constructed using samples of size 9 from each of r and w.
The other confidence interval, i81, is going to be constructed using samples of size 81 from each of r and w. When all other things remain the same, the width of 181 will be 3 times the width of Ig.
To know more about confidence intervals, visit:
https://brainly.com/question/24131141#
#SPJ11
Sarita has 38 inches of fringe to sew around a circular pillow. What is the approximate diameter of the largest pillow she can use?
The approximate diameter of the largest pillow Sarita can use is 12 inches.
Sarita has 38 inches of fringe to sew around a circular pillow.
To calculate the approximate diameter of the largest pillow she can use, we can use the formula 2 × (fringe length ÷ 3.14) = diameter. In this case, the diameter would be approximately 12 inches (38 ÷ 3.14 = 12.1).
To solve this problem, we need to divide the length of the fringe (38 inches) by the value of pi (3.14). Dividing 38 by 3.14 gives us 12.1. Since we are looking for the approximate diameter, we can round this number down to 12 inches.
For more questions on fringe
https://brainly.com/question/27548790
#SPJ11
a square is inscribed in a circle. how fast is the area of the square changing when the circel is increasing at 1 in/min
The area of the square is changing at 12√2 + 2√2t square inches/minute when the circle is increasing at 1 in/min.
Let us find the relationship between r and s using the Pythagorean theorem. Since the square is inscribed in the circle, the diameter of the circle is equal to the diagonal of the square.
2r = s√2
Squaring both sides, we get:
4r² = 2s²or s² = 2r²
Dividing by 2 on both sides, we get:
s²/2 = r²
Differentiating both sides with respect to t, we get:
ds²/dt = 2r (dr/dt)
Dividing both sides by 2s, we get:
ds/dt = r (dr/dt) / s
Substituting r² = s²/2,
[tex]ds/dt = r (dr/dt) / √2s2s ds/dt = r (dr/dt)s ds/dt = (r/2) (dr/dt)2s ds/dt = r (dr/dt) or dA/dt = 2s ds/dt = 2r (dr/dt)[/tex]
Now, substituting r² = s²/2,
dA/dt = 2s ds/dt = 2(√2 s) (dr/dt) = 2(√2) r (dr/dt)
Now, substituting dr/dt = 1 in/min and r = 6 in (since the circle is increasing at 1 in/min, the radius after t minutes is 6 + t),
dA/dt = 2(√2) (6 + t) (1) = 12√2 + 2√2t square inches/minute
Therefore, the area of the square is changing at a rate of 12√2 + 2√2t square inches/minute.
To know more about Pythagorean theorem refer here:
https://brainly.com/question/14930619
#SPJ11
A college student completes a project for statistics class to find the average number of minutes college students exercise each week. The student stands in the main dining hall during dinner 3
times and asks every 10
th student how much he/she exercises in a week, in minutes.
What type of study is the student conducting?
Responses
survey
survey
simulation
simulation
experiment
experiment
census
The type of study which the student is conducting is a survey
What is a Survey?A survey is a set of questions used in human subject research with the goal of gathering specific information from a certain population. Surveys can be carried out via the phone, by mail, online, at street corners, and even in shopping centers.
This is because the student stands in the main dining hall during dinner 3 times and asks every 10th student how much he/she exercises in a week, in minutes and this is to get reasonable and valuable statistical feedback from the students
The correct answer is A. Survey
Read more about surveys here:
https://brainly.com/question/14610641
#SPJ1
suppose now that packet switching is used over the 2.4 mbps link, that each user requires 450 kbps when transmitting, and that there are 21 users in total. each user transmits with a 10% probability. find the probability that at any given time instant, 4 or more users are transmitting simultaneously.
The probability that at any given time instant, 4 or more users are transmitting simultaneously is 0.3297
The binomial distribution is the discrete probability distribution used in probability theory and statistics that only allows for Success or Failure as the potential outcomes of an experiment. For instance, if we flip a coin, there are only two conceivable results: heads or tails, and if we take a test, there are only two possible outcomes: pass or fail. A binomial probability distribution is another name for this distribution.
(a) 21 users
No. of users supported = 2.4 Mbps/450 kbps
= (2.4 x 1000000) / ( 450x 1000)
=20
(b) Probability = 10% of a time
=1/10
=0.1
(c) By using binomial distribution,
probability for N users = [tex]120 CN* (0.1) ^ N * (9/10) ^ 120 - N[/tex]
(d) Total number of chances = 17
probability for more than 4 users = 0.6703
So, 4 and more user's probability = 0.3297
=0.3297
The probability of 4 or more users are transmitting simultaneously is 0.3297.
Learn more about Probability:
https://brainly.com/question/21796012
#SPJ4
A restaurant offers fruit juices as welcome drinks to all its customers. There is a 29% chance of getting apple juice, a 31% chance of getting grape juice, a 19% chance of getting orange juice, and a 21% chance of getting pear juice. Is it less likely that you will get apple, grape, orange, or pear juice?
No, it is not less likely that you will get one of the four types of juice, as they are the only options available.
Probability of getting apple juice = 29%
= 0.29
probability of getting grape juice = 31%
= 0.31
Probability of getting orange juice = 19%
= 0.19
Probability of getting pear juice = 21%
= 0.21
The total probabilities of getting apple, grape, orange, and pear juice sum up to
= 29% + 31% + 19% + 21%
= 100%.
or
= 0.29 + 0.31 + 0.19 + 0.21
= 1.00
This implies,
That every customer will get one of the four types of juice, and there is a 100% chance of getting one of them.
Therefore, the given probabilities are not less likely as it represents chances of one type of juice definitely will be given.
learn more about juice here
brainly.com/question/10715342
#SPJ4