The ball is in contact with the wall for 0.0948 s and 9.498 N is the magnitude of the average force exerted on the ball by the wall
The average force exerted on the ball by the wall when the ball is in contact with the wall for 0.0948 s is given by the change in momentum of the ball in the horizontal direction divided by the time of contact.
This can be expressed mathematically as:
[tex]F_{avg}[/tex] = Δp/Δt
Where Δp is the change in momentum and
Δt is the time of contact.
Let's assume that the ball is moving to the right with a velocity [tex]v_1[/tex] before it collides with the wall.
After the collision, it moves to the left with a velocity [tex]v_2[/tex].
Since the direction of the velocity has changed, the momentum of the ball has also changed.
Therefore, Δp = [tex]p_2 - p_1[/tex]
where [tex]p_1[/tex] and [tex]p_2[/tex] are the momenta of the ball before and after the collision, respectively.
Since the ball is moving in only one dimension, the momenta of the ball can be expressed as:
[tex]p_1 = mv_1[/tex] and
[tex]p_2 = -mv_2[/tex]
where m is the mass of the ball.
Thus,
Δp = -m([tex]v_2 - v_1[/tex])
Therefore, the average force exerted on the ball by the wall is given by:
F_avg = Δp/Δt = -m([tex]v_2 - v_1[/tex])/Δt = -0.15(2 - 6)/0.0948 = - 9.498 N
The negative sign indicates that the force exerted by the wall on the ball is in the opposite direction to the motion of the ball.
Therefore, the average force exerted on the ball by the wall when the ball is in contact with the wall for 0.0948 s is 9.498 N.
For similar question on average force
https://brainly.com/question/18652903
#SPJ11
will you run down your car battery if you have electrical accessories running while needing lots cranking to get the engine started?
Yes, running electrical accessories while needing lots of cranking to start the engine will run down the car battery. The electrical accessories include headlights, radio, air conditioning, seat warmers, GPS system, power windows, and more.
Automobiles use rechargeable batteries known as lead-acid batteries. The battery serves two purposes in an automobile. The first function is to start the engine. The second function is to provide electrical energy to the automobile's electrical system when the alternator is not operational. If the battery is not working correctly, the automobile will not start, and the electrical accessories will not work.
The battery will run down when electrical accessories are running because the battery's stored electrical energy is being consumed by electrical accessories. When the engine is running, the alternator charges the battery, and the electrical accessories receive their energy from the alternator. If the battery has insufficient stored electrical energy or is not receiving a charge from the alternator, the electrical accessories will stop functioning.
Electrical accessories running while needing lots of cranking to get the engine started will drain the battery faster than using electrical accessories while the engine is running. This is because the battery must provide energy to start the engine while simultaneously powering the electrical accessories. If the battery is not charged enough, the engine will not start, and the battery will be drained even more. Therefore, it is advisable to turn off all electrical accessories when trying to start the engine.
To know more about the "battery": https://brainly.com/question/26466203
#SPJ11
at an amusement park there is a ride in which cylindrically shaped chambers spin around a central axis. people sit in seats facing the axis, their backs against the outer wall. at one instant the outer wall moves at a speed of 3.13 m/s, and an 83.6 kg person feels a 578 n force pressing against his back. what is the radius of a chamber
The radius of the cylindrical chamber in the amusement park ride can be calculated using formula for centripetal force and the given values for velocity and force. In this case, the radius is approximately 14.3 meters.
The person is seated facing the axis, with their back against outer wall. At a given instant, the outer wall moves at a speed of 3.13 m/s, and the person feels a 578 N force pressing against their back.
To determine the radius of the chamber, we can use formula for centripetal force, [tex]Fc = (mv^2) / r[/tex].
Rearranging the formula to solve for r, we get r = (mv^2) / Fc. Substituting the given values, we get[tex]r = (83.6 kg * (3.13 m/s)^2) / 578 N,[/tex] which simplifies to [tex]r = 14.3 m[/tex]. Therefore, the radius of the cylindrical chamber is approximately [tex]14.3 meters[/tex].
To know more about cylindrical chamber, here
brainly.com/question/30697857
#SPJ4
There are many ways to reduce the amount of waste that we produce. Which of the following is not a reduction or minimization strategy?a)purchasing items that are reusable
b)reduced packaging
c)buying individually packaged items, not in bulk container
d)recycling
e)reducing the amount that a consumer purchases
There are many ways to reduce the amount of waste that we produce. Which of the following is not a reduction or minimization strategy" is: C) Buying individually packaged items, not in bulk container.
Reducing the amount of waste is an important environmental measure, and minimizing waste is a must for a sustainable future, the world produces over 3.5 million tons of waste each day. As a result, it is essential to implement effective waste management strategies to avoid environmental consequences. Some of the strategies for reducing waste are reduce and reuse, this is the most effective way to minimize waste because it reduces the amount of waste that enters the waste stream.
Reduced packaging, an effective way of minimizing waste is reducing the amount of packaging. Less packaging means less waste, and it also saves on costs. Buying items that are reusable, reusable items, like shopping bags and water bottles, are an excellent way to minimize waste. Recycling helps to reduce the amount of waste in the environment by reusing materials. Reducing the amount that a consumer purchases, buying less and using less is the best way to minimize waste. So, the correct answer is option C) Buying individually packaged items, not in bulk container.
Learn more about reducing waste at:
https://brainly.com/question/26112432
#SPJ11
an object floating in a container of water and partially submerged has the same density as the water. question 2 options: true false
The given statement "an object floating in a container of water and partially submerged has the same density as the water" is true.
When an object is placed in water, it sinks until the weight of the water displaced by the object equals the weight of the object.
If an object has the same density as water, it displaces an equal amount of water to its own weight. When it displaces the same amount of water that has an equivalent mass to the object, it will float partially submerged. If the object's density is greater than water, it will sink. If the object's density is less than that of water, it will float entirely above the water's surface.
Density is defined as the mass of an object per unit volume. The formula for density is mass/volume. Density is a crucial physical property that is used to define and classify materials. The density of an object is determined by its mass and volume. The unit of measurement for density is kg/m3 or g/cm3. The density of water is 1 g/cm3, which is why objects with a density of less than 1 g/cm3 float on water.
An object floating in a container of water and partially submerged has the same density as the water.
To know more about density click here:
https://brainly.com/question/15164682
#SPJ11
outlets on a household circuit are arranged in select one: a. a combination of series and parallel. b. not given c. parallel. d. neither series or parallel. e. series.
The outlets on a household circuit are arranged in c. parallel.
An electrical circuit is a closed path that allows electricity to flow from a source through a conductor, through an electrical load, and back to the source. An electrical circuit has several components, including a voltage source, a conductor, a load, and switches, which are all linked together in a closed path.The arrangement of outlets on a household circuit is in parallel. In an electrical circuit, components are said to be wired in parallel if they are wired such that the current flows through each component independently of the other components.
The outlets on a household circuit are linked together in parallel, which means that each outlet is connected to the same source voltage via a separate wire. Each outlet receives the same voltage, which means that the voltage across each outlet is the same as the voltage across the voltage source. Because each outlet is connected to the source via its wire, each outlet is connected in parallel with the others. This is the reason that when one outlet stops working, the other outlets on the circuit continue to operate.
Learn more about conductor at:
https://brainly.com/question/28582532
#SPJ11
two people are yelling at the same time. one yells with an intensity level of 80.0 db, and the other at 90.0 db. what is the total sound intensity level?
The total sound intensity level is approximately 87 dB.
When two sounds with different intensities are present simultaneously, the total sound intensity level is found by adding the individual sound intensity levels in decibels (dB) using the following equation,
L_total = 10 log10(I_total/I_0)
where L_total is the total sound intensity level, I_total is the total sound intensity, and I_0 is the reference sound intensity (usually taken as 10^-12 W/m^2).
In this case, we have two sounds with intensity levels of 80.0 dB and 90.0 dB. To find the total sound intensity level, we first need to convert each intensity level to sound intensity,
I_1 = I_0 10^(L_1/10) = (10^-12 W/m^2) 10^(80.0/10) = 10^-5 W/m^2
I_2 = I_0 10^(L_2/10) = (10^-12 W/m^2) 10^(90.0/10) = 10^-4 W/m^2
where L_1 and L_2 are the intensity levels of the two sounds in dB.
The total sound intensity is the sum of these two sound intensities,
I_total = I_1 + I_2 = 10^-5 W/m^2 + 10^-4 W/m^2 = 1.1 x 10^-4 W/m^2
L_total = 10 log10(I_total/I_0) = 10 log10(1.1 x 10^-4/10^-12) ≈ 87 dB
To know more about sound intensity, here
brainly.com/question/28448860
#SPJ4
Part A Reflect on how you use electricity at home. Think about times when you might be wasting energy. For example, leaving on appliances, such as lights, wastes energy if you're not using them. Come up with a tip to address the problem you've identified.
Answer:
at night unplug EVERYTHING
explanation
when the power is off on a device it still may using a little electricity to recharge the battery inside or keep a clock running, etc. usually there are a lot of things plugged in a home so even if each thing is not using a lot of electricity, ALL the things that plugged in, put together, maybe using A LOT.
a child stands with each foot on a different scale. the left scale reads 200 n and the right scale reads 250 n. what is her mass in kg? the acceleration due to gravity is 9.8 m/s2? group of answer choices 36 kg 350 kg 3430 kg 45.9 kg
The mass of the child is 45.9 kg. Therefore, the answer is option D.
Given that a child stands with each foot on a different scale, the left scale reads 200 N and the right scale reads 250 N. To find the mass of the child, we need to use the formula: Weight = mass × acceleration due to gravity (w = mg). The acceleration due to gravity is 9.8 m/s². Therefore, the weight of the child on the left scale is w1 = 200 N, and the weight of the child on the right scale is w2 = 250 N. We can use these two weights to calculate the mass of the child. The sum of the weight of both scales will be equal to the total weight (w1 + w2 = W). Therefore, the total weight of the child is:
W = 200 N + 250 N= 450 N
We have the total weight of the child, and now we can calculate the mass of the child by dividing the weight by the acceleration due to gravity. Therefore, the mass of the child is:
m = W/g
= 450 N / 9.8 m/s²
= 45.92 kg
To learn more about Mass :
https://brainly.com/question/86444
#SPJ11
consider a hypothetical planet with a radius of 162 million meters and a mass of 1027 kg. what is the density of this planet, in kg/m3? round to the nearest integer.
The density of the hypothetical planet, in kg/m3, is 6,246 kg/m3
Calculate the volume of the planet in m3V = (4/3)πr3
V = (4/3)π(162 x 106 m)3
V = 9.30 x 1018 m3
The density of the planet in kg/m3
We know that Density is given as
D = Mass ÷ Volume
D = 1027 kg ÷ 9.30 x 1018 m3
D = 6,246 kg/m3
Density is a measure of mass per unit of volume. It is expressed in terms of mass per volume and is typically measured in kg/m3 or g/cm3. Density is an important physical property of matter as it allows us to compare the mass of different substances at the same volume.
Learn more about density here:
https://brainly.com/question/26364788
#SPJ1
a block slides along a rough surface and comes to a stop. what can you conclude about the frictional force exerted on the block?
The frictional force exerted on the block when it slides along a rough surface is a non-zero force.
When the block comes to a stop, it can be concluded that the frictional force is equal in magnitude to the block's applied force but opposite in direction. This means that the frictional force is doing negative work since it is resisting the motion of the block. In other words, the frictional force is in the opposite direction of the motion and reduces the kinetic energy of the block until it stops.
The magnitude of the frictional force can be determined by the equation:
Ff = μFn, where Ff is the frictional force, μ is the coefficient of friction and Fn is the normal force.
The coefficient of friction is determined by the type of surfaces the block and the ground have. For example, if both the block and the ground are made of steel, the coefficient of friction would be higher than if the block was made of rubber and the ground was made of marble.
Therefore, when a block slides along a rough surface and comes to a stop, we can conclude that a non-zero frictional force is exerted on the block, which is equal in magnitude to the applied force but opposite in direction.
To know more about frictional force, refer here:
https://brainly.com/question/1714663#
#SPJ11
if 22.5L of nitrogen at 748 mm Hg are compressed to 725 mm hg at constant temperature what is the new volume?
The new volume is approximately 23.16 L when the nitrogen gas is compressed from 748 mmHg to 725 mmHg at constant temperature.
Use the combined gas law to determine the relationship between a gas's pressure, volume, and temperature:
P1V1/T1 = P2V2/T2
where the gas's starting pressure, volume, and temperature are P1, V1, and T1, and its ultimate pressure, volume, and temperature are P2, V2, and T2.
The equation may be made simpler by saying: since the temperature is constant.
P1V1 = P2V2
Substituting the given values, we get:
725 mmHg × V2 = 748 mmHg × 22.5 L
Solving for V2, we get:
V2 = (748 mmHg × 22.5 L) / 725 mmHg
V2 = 23.16 L
A gas law known as the combined gas law connects a gas's pressure (P), volume (V), and temperature (T). It combines Boyle's law, Charles' law, and Gay-law, Lussac's three additional gas laws.
Learn more about Volume here:
https://brainly.com/question/18090062
#SPJ1
what size of resistor is necessary between a 12 volt dc battery in order not to cause the battery to burn?
24 ohm resistor is necessary for a 12 Volt DC battery in order to not burn.
Ohm's Law states that the current (I) flowing through a conductor between two points is directly proportional to the voltage (V) across the two points, and inversely proportional to the resistance (R) between them.
Mathematically, it is represented as:I = V/R
To calculate the resistance needed, rearrange the formula to solve for R:
R = V/I
For example, if the load is drawing 0.5 amps of current from a 12 volt battery, the resistance needed would be:R = 12V / 0.5A = 24 ohms
To learn more about resistor:
https://brainly.com/question/24297401#
#SPJ11
newtons first law can be applied to a. static equilibrium. b. inertial equilibrium. c. dynamic equilibrium. d. both a and b. e. both a and c.
Newton's first law can be applied to both static equilibrium and dynamic equilibrium. Thus, both a and c is correct.
Newton's First Law states that an object will remain at rest or in motion in a straight line unless acted on by an external force. This means that static equilibrium, which is a state in which the sum of all forces acting on an object is equal to zero, is an example of Newton's First Law.
A dynamic equilibrium, which is a state in which the sum of all forces acting on an object is equal to its acceleration, is also an example of Newton's First Law.
Therefore, the correct answer is e. both a and c.
Learn more about Newton's first law of motion here:
https://brainly.com/question/1222214
#SPJ11
how much water should be taken up by a plant when the air around it is completely saturated with water - 100 percent humidity.
The amount of water that a plant should take up when the air around it is completely saturated with water, i.e. 100 percent humidity, is the maximum amount of water the plant is capable of taking up from the environment. This is because there is no water left in the air for the plant to absorb.
What is humidity?Humidity refers to the amount of moisture present in the air. The humidity in the air is an important factor for the growth of plants. Humidity refers to the amount of moisture present in the air. The humidity in the air is an important factor for the growth of plants. In addition, the amount of water vapor present in the air determines how much water a plant can take up. As a result, humidity can play an important role in plant water uptake.
When the air around the plant is completely saturated with water, it means that the air has reached its maximum capacity for water vapor. The relative humidity, in this case, is 100%. When the air is completely saturated with water, it becomes difficult for the plant to take up any more water from the environment, as there is no water left in the air to absorb.
Therefore, the amount of water that a plant can take up is limited by the amount of water vapor present in the air.
Read more about water :
https://brainly.com/question/1313076
#SPJ11
what is the name of the furnace that is vertical cylindrical and equipped with a tapping spout near its base.
The furnace you are referring to is commonly known as a blast furnace that is vertically cylindrical and equipped with a tapping spout near its base.
Blast furnaces are a type of industrial furnace that is used for smelting iron ore into pig iron. They are typically tall, cylindrical structures made of steel, lined with fireproof bricks, and equipped with several openings for charging raw materials, injecting hot air and fuel and tapping molten iron.
The process involves heating the iron ore with coke and limestone in a controlled environment to produce carbon monoxide, which reduces the iron oxide to iron.
The molten iron is then extracted from the furnace through a tapping spout located near its base, while the molten scrape metal, a byproduct of the process, is tapped off separately. Blast furnaces are still used today in the iron and steel industry, although newer technologies are gradually replacing them.
Learn more about blast furnaces at
https://brainly.com/question/9908152
#SPJ4
a 100 cm diameter propeller blade, similar to the blade in example 4.15, is attached to a motor spinning at a constant rate. what is true about the radial (centripetal) acceleration and the tangential acceleration at the end of the blade?
The true statements about the radial (centripetal) acceleration and the tangential acceleration at the end of the blade are: the radial acceleration is non-zero the tangential acceleration is zero
The radial acceleration is non-zero and the tangential acceleration is zero. This is because, the radial acceleration is determined by the formula, ar = (v²)/r
where ar is the radial acceleration, v is the velocity and r is the radius. Thus, since the propeller blade is spinning at a constant rate, the velocity v is constant.
Therefore, the radial acceleration is constant and non-zero.
The tangential acceleration, on the other hand, is given by at = rα
where at is the tangential acceleration and α is the angular acceleration. Since the blade is spinning at a constant rate, the angular acceleration is zero. Therefore, the tangential acceleration is zero.
So, the correct option is the radial acceleration is non-zero and the tangential acceleration is zero.
Learn more about tangential acceleration at https://brainly.com/question/11476496
#SPJ11
a curve in a road forms part of a horizontal circle. as a car goes around it at constant speed 14.0 m/s, the horizontal total force on the driver has magnitude 149 n. what is the total horizontal force on the driver if the speed on the same curve is 23.9 m/s instead
The total horizontal force on the driver when the speed on the same curve is 23.9 m/s is approximately 570.5 N.
To find the total horizontal force on the driver when the speed on the same curve is 23.9 m/s instead, we can use the concept of centripetal force. The centripetal force Fc is given by the formula: [tex]Fc = (mv^2) / r[/tex], where m is the mass of the driver, v is the speed of the car, and r is the radius of the curve.
First, we need to determine the mass of the driver using the given information:
149 N =[tex](m * (14.0 m/s)^2) / r[/tex]
We can rearrange the equation to find the mass: m =[tex](149 N * r) / (14.0 m/s)^2[/tex]
Now we want to find the centripetal force at the new speed of 23.9 m/s.
We can use the same formula: [tex]Fc_new = (m * (23.9 m/s)^2) / r[/tex]
We can substitute the mass equation we found earlier into this equation:
[tex]Fc_new = ((149 N * r) / (14.0 m/s)^2) * (23.9 m/s)^2 / r[/tex]
The r values cancel each other out, leaving: [tex]Fc_new = 149 N * (23.9 m/s)^2 / (14.0 m/s)^2[/tex]
Now, calculate the new force:
[tex]Fc_new = 149 N * (23.9^2 / 14.0^2) ≈ 570.5 N[/tex]
So, the total horizontal force on the driver when the speed on the same curve is 23.9 m/s is approximately 570.5 N.
To know more about horizontal force, refer here:
https://brainly.com/question/30836538#
#SPJ11
to form cloud droplets in the sky, water vapor molecules must have a surface on which to adhere, a (an) .
To form cloud droplets in the sky, water vapour molecules must have a surface on which to adhere, a nucleus.
What is Cloud? Cloud is a combination of tiny water droplets or ice crystals that float in the air. Clouds are one of the sky's most beautiful and fascinating features. They come in a variety of forms, including white wispy cirrus clouds to big grey thunderclouds. These vapour droplets are very tiny, about 10 microns in diameter, and can be seen only when they reflect light. What is a nucleus? A nucleus is a tiny particle that serves as a foundation or centre around which other particles aggregate. Aerosols, like dust or salt, are frequently used as nuclei for cloud droplets to develop. It's also worth noting that a surface has to be stable to allow water droplets to form. A dust particle, for example, could be an excellent nucleus for water droplets to develop because it has a stable surface.
For more such questions on Cloud
https://brainly.com/question/30470077
#SPJ11
a train with a monochromatic headlight is approaching you at a speed of 1 18 c. if a student on the train measures the wavelength of the light to be 590 nm, what do you measure the wavelength (in nm) to be? nm
The wavelength of the light you measure is 197.53 nm.
Wavelength is a concept that describes the length of one wave. It's typically measured in meters or nanometers in the context of electromagnetic waves, such as light waves.
The student on the train measured the wavelength of light to be 590 nm, and the speed of the train was 1.18c.
λ2 = λ1 / (1 - (v/c)), where λ1 is the wavelength of the light measured on the train, λ2 is the wavelength of the light measured by you, v is the velocity of the train, and c is the speed of light.
λ1 = 590 nm, v = 1.18c, and c = 3.00 x 108 m/s are the values we'll input.λ2 = λ1 / (1 - (v/c)) is the calculation we'll make.
λ2 = 590 nm / (1 - (1.18c / 3.00 x 108 m/s))We'll begin by simplifying the denominator:λ2 = 590 nm / (1 - 3.93 x 10-3)λ2 = 590 nm / 0.99607λ2 = 591.79 nm
We can round our answer to three significant figures, as the original wavelength measurement had three.λ2 = 592 nm.The wavelength of the light you measure is 197.53 nm.
to know more about wavelength refer here:
https://brainly.com/question/31143857#
#SPJ11
5. Block A, of mass M, is suspended from a light string that passes over a pulley and is
connected to block B of mass 2M. Block B sits on the surface of a rough table with a
coefficient of kinetic friction μk. When the system of two blocks is released from rest,
block A accelerates downward with a constant acceleration and block B moves to the
right. The moment of inertia of the pulley is I = 1.5 MR². Present all results in terms of
M, g, and R.
a. Find the linear acceleration of the system.
b. Find the tension force in the vertical section of the string.
c. Find the tension force in the horizontal section of the string.
d. Find the minimum value of μs, such that the blocks will not move.
The linear acceleration of the system is a = g (1 - μk) / 3
Tension force in the vertical section of the string is T = M g
Tension force in the horizontal section of the string is 2 M g (1 - μk).
Minimum value of μs is 3 μs + μk ≥ 1
How to calculate linear acceleration and tension force?a. The system is in equilibrium when the tension force in the string balances the weight of block A. Therefore: T - M g = M a
where T is the tension force in the string, g is the acceleration due to gravity, and a is the linear acceleration of the system.
The system of block B is subject to a friction force opposing its motion to the right. Therefore: T = 2 M g - μk N
where N is the normal force exerted by the table on block B.
The normal force N is equal in magnitude to the weight of block B, since the block is not accelerating in the vertical direction. Therefore:
N = 2 M g
Substituting N into the equation for T:
T = 2 M g - μk (2 M g)
T = 2 M g (1 - μk)
Substituting this expression for T into the equation for the acceleration: (2 M g) (1 - μk) - M g = M a
Simplifying: a = g (1 - μk) / 3
Therefore, the linear acceleration of the system is: a = g (1 - μk) / 3
b. The tension force in the vertical section of the string is equal in magnitude to the weight of block A. Therefore: T = M g
c. The tension force in the horizontal section of the string can be found by considering the torque equation for the pulley. The torque due to the tension force on the pulley is equal to I α, where α is the angular acceleration of the pulley. Since the pulley is in equilibrium, we have α = 0, and the torque due to the tension force is zero. Therefore, the tension force in the horizontal section of the string is also equal to T, which we found to be equal to 2 M g (1 - μk).
d. The minimum value of μs such that the blocks will not move is given by the condition:
μs ≥ a / g
where a is the linear acceleration of the system.
Substituting the expression for a that we found earlier: μs ≥ (1 - μk) / 3
Multiplying both sides by 3 and adding μk to both sides: 3 μs + μk ≥ 1
Therefore, the minimum value of μs is: μs ≥ (1 - μk) / 3 or equivalently: 3 μs + μk ≥ 1
Learn more on tension force here: https://brainly.com/question/2008782
#SPJ1
you take two similar photos. the settings for proper exposure are: iso 100, f-5.6 at 1/60 shutter speed. you want to shoot a photo at 1/500 shutter speed, but keep your f-stop at 5.6. to compensate for the difference in light, what will you set your iso in order to keep proper exposure?
Consequently, we must set the ISO to 800 when shooting at 1/500 shutter speed and f/5.6 aperture to preserve adequate exposure.
What does the 500 shutter speed rule mean?It suggests setting your shutter speed to 500 Equivalent Focal Length. The 500 rule therefore advises using a shutter speed of 500 20 = 25 seconds if your full-frame equivalent focal length is 20mm.
By increasing the shutter speed from 1/60 to 1/500, it is necessary to account for the variation in light.
The difference in exposure between 1/60 and 1/500 is approximately 3 stops (1/60 → 1/125 → 1/250 → 1/500).
Hence, we must also raise the ISO by three stops in order to account for this difference in shutter speed.
Starting with ISO 100, increasing the ISO by 3 stops will give us:
ISO 100 → ISO 200 (1 stop) → ISO 400 (2 stops) → ISO 800 (3 stops)
Consequently, we must set the ISO to 800 when shooting at 1/500 shutter speed and f/5.6 aperture to preserve adequate exposure.
To know more about aperture visit:-
https://brainly.com/question/13088841
#SPJ1
Need help with this (Homework)
Answer:
1. goes to B.
2. goes to D.
3. goes to A.
4. goes to C.
I had to do this in 8th grade so if im wrong sorry.
If im right please mark me brainliest
how does the plot differ from the plots for tube radius, viscosity, and tube length? how well did the results compare with your prediction
The plot differs for tube radius, viscosity, and tube length in terms of their effect on fluid flow. The effect of each parameter is analyzed and plotted against the velocity profile of the fluid flow.
For tube radius, as the radius increases, the fluid flow velocity increases as well. This can be observed in the plot where the velocity profile is a bell-shaped curve, with the peak shifting to the right as the radius increases.
For viscosity, the effect is the opposite. As viscosity increases, the fluid flow velocity decreases. This can be observed in the plot where the velocity profile is a flatter curve, with a smaller peak as the viscosity increases.
For tube length, there is a similar effect as tube radius. As the length increases, the fluid flow velocity decreases. This can be observed in the plot where the velocity profile is a bell-shaped curve, with the peak shifting to the left as the length increases.
In terms of the comparison with the prediction, the results were mostly in line with what was expected. The plots showed the expected trends for each parameter, and the quantitative analysis confirmed this as well. However, there were some discrepancies between the predicted and actual values, which could be due to experimental error or limitations in the model used.
Overall, the results provided valuable insights into the relationship between these parameters and fluid flow, and can be used to optimize fluid systems for various applications.
For more such questions on Fluid flow.
https://brainly.com/question/30022802#
#SPJ11
c) the rubber band is stretched under a constant tension. will it shrink when you warm the rubber band under the constant tension? do your analysis.
c) The rubber band is stretched under a constant tension. when you warm the rubber band under the constant tension it will expand instead of shrinking.
If you warm the rubber band while keeping it under constant tension, it will expand instead of shrinking. This occurs due to the fact that the rubber band's atoms begin to vibrate more as a result of the heat. This vibrating motion produces more space between the atoms, causing the rubber band to expand.
The original condition of the rubber band under constant tension is when a rubber band is stretched, it has an intrinsic tendency to restore its original size and shape when the tension is released. It implies that if the rubber band is heated, it will also restore its original size and shape once the tension is released. It will take the same size as it had before being stretched.
Learn more about vibrating motion at:
https://brainly.com/question/28040762
#SPJ11
a force f applied to an object of mass m1 produces an acceleration of 7.36 m/s2. the same force applied to a second object of mass m2 produces an acceleration of 2.62 m/s2. what is the value of the ratio m1/m2?
The value of the ratio m1/m2 is approximately 0.3559.
Given that a force F applied to an object of mass m1 produces an acceleration of 7.36 m/s², and the same force applied to a second object of mass m2 produces an acceleration of 2.62 m/s².To find the value of the ratio m1/m2, we can use the equation: F = ma Where, F = force m = mass a = acceleration. We have F and a for both objects, and we need to find the ratio of masses m1/m2.Let's write the equation for both objects and then divide the two equations:For object 1:F = m1a1------------------------(1)For object 2:F = m2a2------------------------(2)Dividing the equation (1) by equation (2):m1a1/m2a2 = m1/m2 = (F/m1a1)/(F/m2a2)= (m2a2/F)/(m1a1/F)Now, substituting the values of a1, a2, and F, we get:m1/m2 = (m2 x 2.62)/(m1 x 7.36)= 2.62m2/7.36m1= 0.3559(m2/m1)Therefore, the value of the ratio m1/m2 is approximately 0.3559.
Learn more about Ratio
brainly.com/question/13419413
#SPJ11
for an incandescent bulb, initial cost may be high but the energy costs will be low over its life time. (1 point) group of answer choices true false
True. An incandescent bulb may have a higher initial cost than other types of lightbulbs, but it uses less energy over its lifetime and thus reduces energy costs.
For an incandescent bulb, the given statement is true. In candescent bulbs are traditional bulbs, which use a filament to create light. These bulbs are less efficient, as they waste most of the electricity they use as heat rather than light. As a result, the bulbs are less cost-effective in the long run.
They use up more energy than modern alternatives such as CFLs (compact fluorescent lights) or LEDs (light-emitting diodes). Despite their low initial cost, incandescent bulbs are not recommended for long-term use. They consume more electricity and thus have a greater impact on the environment. Therefore, it is not true that the energy costs of an incandescent bulb will be low over its life time.
Read more about costs:
https://brainly.com/question/25811981
#SPJ11
g two waves of light, wave a and wave b have the same speed. wave a has a wavelength of 235 nm and wave b has a wavelength of 515 nm. what can you say about the frequency?
Because both waves travel at the same speed, we know they must have distinct frequencies in order to have different wavelengths. This is due to the fact that the speed of light in a particular medium is constant,
and the frequency of a wave is inversely related to its wavelength. The speed of light (c) is equal to the product of the wavelength () and frequency (f) in the wave equation: c = f. Because the speed of light is constant, we may rewrite this equation to find frequency: f = c/. We have the following for wave a with a wavelength of 235 nm:
[tex]f_a = \frac{3.00 * 10^8 m/s}{235 * (10-9) m} = 1.28 x 10^{15} Hz[/tex]
We have the following for wave b with a wavelength of 515 nm:
[tex]f_b[/tex] = c / λ b = 3.00 x 10⁸ m/s / (515 x 10⁻⁹ m) = 5.83 x 10¹⁴ Hz
Therefore, we can see that wave a has a higher frequency than wave b.
learn more about speed here:
https://brainly.com/question/28224010
#SPJ4
Consider a two step Stern-Gerlach experiment, where our quantization axis is z and you apply the magnetic field along this axis; hence, you split the beam of spin-half particles (e.g., electrons) into two, i.e., Sz =1, . A Now select only the beam of † particles and let it pass through another Stern-Gerlach analyzer with the magnetic field along x direction and measure the spin along the x axis. What values of the spin will you find and what probabilities will be associated with those values? B If the same electron after the Se measurement is sent back to the the Stern-Gerlach analyzer measuring the Sz what would they find? (Note this means that the electron has passed through three Stern-Gerlach analyzers)
A. Magnetic field along the x-axis splits spin-half particles into Sx = +1/2 and Sx = -1/2 beams of equal probability.
B. After Sx measurement, the electron is sent back to the Sz analyzer, with an equal probability of finding it in Sz = +1/2 or Sz = -1/2 spin state.
A. In the second Stern-Gerlach experiment, when the magnetic field is applied along the x-axis, the spin-half particles (e.g., electrons) will again be split into two beams: Sx = +1/2 and Sx = -1/2. The probabilities associated with each value will be 50%, as the spin states along the x-axis are equally probable for a particle initially polarized along the z-axis.
B. If the same electron after the Sx measurement is sent back to the Stern-Gerlach analyzer measuring the Sz, you will find two possible spin values, Sz = +1/2 and Sz = -1/2, as the electron's spin state along the z-axis has been altered by the measurement along the x-axis.
The probabilities for each value will be 50%, as the spin states along the z-axis are equally probable after the measurement along the x-axis.
Therefore, in the second Stern-Gerlach experiment when a magnetic field is applied along the x-axis, spin-half particles are split into two beams of equal probability and if the same electron is sent back to the Stern-Gerlach analyzer there will be an equal probability of finding the electron.
To know more about magnetic field click here:
https://brainly.com/question/11514007
#SPJ11
Satellite A is thrown at 8 km/s. Satellite B is thrown 15 km/s. Describe below the difference in satellite A and satellite B’s motions.
The description of both satellite A and satellite B’s motions are stated below.
Description of satellite A and satellite B’s motionsA satellite is an object that orbits another object, such as a planet or moon. It is usually a man-made object and can be used for a variety of purposes, such as communications, navigation, weather forecasting, and scientific research.
Satellite A will travel at a slower speed than Satellite B. Satellite A will experience less acceleration due to its lower starting velocity, causing it to travel a shorter distance and take a shorter amount of time to reach its destination.
Satellite B will experience greater acceleration due to its higher starting velocity, causing it to travel a longer distance and take a longer amount of time to reach its destination.
Learn more about satellite here:
https://brainly.com/question/18496962
#SPJ1
based on your observations of heat transfer through different states of matter, how would you create an efficient system of heat transfer?
An efficient system of heat transfer should be designed to maximize the transfer of heat through the different states of matter. To achieve this, the system should account for the heat transfer rates of each of the different states of matter.
For example, solids generally transfer heat at a much slower rate than liquids and gases, so the system should be designed to move the heat through liquid or gas paths as much as possible.
Additionally, the system should be designed to direct the heat through the shortest paths possible, as this will reduce the amount of time needed for the heat to transfer. Finally, the system should be designed with insulators to maximize the amount of heat that is retained in the system. By taking these measures, an efficient system of heat transfer can be designed that will optimize the heat transfer rates.
Know more about insulators here
https://brainly.com/question/2619275#
#SPJ11