How many days are equal to 7000min round two places after the decimal

As electrons are passed down an electron transport system protons are pumped across a membrane.

The correct answer is option C.

When electrons pass through the electron transport chain, they lose energy. As low-energy electrons break down oxygen molecules and produce water, high-energy electrons from NADH or FADH2 complete the chain. The electron transport pathway produces three molecules of water for every three carbon sugars broken down during aerobic respiration.

This means that when six carbon sugars are broken down, six molecules of water are produced. The end products of electron transport include NAD+, FAD, water, and protons. Since protons are propelled through the crystal membrane by the free energy of electron transport, they exit the mitochondrial matrix.

Learn more about electron transport system at

https://brainly.com/question/28163074

#SPJ4

Answer:

8 atoms it have but u don't know

The mass gain that happened after the reaction could have been caused due to the matter was created in the reaction .  

What is mass gain?

In physics, mass gain refers to an increase in mass in a chemical or nuclear reaction. It is the difference between the mass of the reactants and the mass of the products after a chemical reaction has occurred.

What happened in the given problem?

According to the given problem, the starting mass of the apparatus and solid was 113.249 g. After the reaction was complete, the apparatus was reweighed. The resulting mass was 113.276 g. The problem asks which of the following could have caused the mass gain.

The mass gain could have been caused by the following:

They forgot to weigh the mass of the gas-generating solid before the reaction

The apparatus picked up extra water droplets between weighing's.

Matter was created in the reaction.

The apparatus picked up extra water droplets between weighings, but they forgot to weigh the mass of the gas-generating solid before the reaction, and matter was created in the reaction.

To know more about the mass https://brainly.com/question/19694949

#SPJ11

The unknown amine reacted with iodomethane and afforded the following tetraalkylammonium salt.

The structure of the unknown amine is an aliphatic amine. An aliphatic amine is an organic compound with at least one nitrogen atom connected to alkyl groups. It may have single, double, or triple bonds between nitrogen and the carbon atoms of the alkyl group.

Aliphatic amines can be secondary, tertiary, or primary depending on the number of alkyl groups attached to the nitrogen atom.

In the case of the unknown amine, the number of alkyl groups connected to the nitrogen atom is four, meaning that it is a primary aliphatic amine. aliphatic amines have the general formula of RCH2NH2, where R represents a hydrocarbon chain.

To know more about aliphatic amine click on below link:

https://brainly.com/question/24114560#

#SPJ11

Since the percentage yield exceeds 100%, the actual yield obtained exceeds the theoretical value. This can be the result of flawed experiments or insufficient replies.

The limiting reactant in the reaction between 3g of Hydrogen and 29g of Oxygen is hydrogen. Water formation can produce a maximum of 27 g. Five grammes of the reactant are still unreacted.

2Hydrogen + Oxygen → 2Water

moles of Hydrogen = mass / molar mass = 40 g / 2.016 g/mol = 19.84 mol

moles of Water = moles of Hydrogen / 2 = 19.84 mol / 2 = 9.92 mol

The molar mass of water is 18.015 g/mol, so the mass of water produced can be calculated as follows:

mass of Water = moles of Water × molar mass = 9.92 mol × 18.015 g/mol = 178.6 g

Therefore, the theoretical yield of water is 178.6 g.

The percentage yield can be calculated as follows:

% yield = (actual yield / theoretical yield) × 100%

% yield = (234 g / 178.6 g) × 100% = 131%

To know more about percentage yield visit:-

https://brainly.com/question/30579872

#SPJ9

Double replacement or metathesis reaction involves the exchange of ions between two compounds.

Combination or synthesis reaction is a  type of reaction that  involves two or more reactants combining to form a single product. The general format is A + B → AB.

Decomposition reaction involves a single reactant breaking down into two or more products. The general format is AB → A + B.

The matching of the letters are;

1 - C

2 - H

3 - E

4 - F

5 - A

6 - B

7 - I

8 - J

9 - G

10 - D

1) False

2) False

3) True

4) False

5) True

6) True

7) True

Learn more about reaction:https://brainly.com/question/28984750

#SPJ1

When 0.0400 mol KOH is added to 1.0 L of a solution that is 0.25 M in NH3 and 0.20 M in NH4NO3, the pH increases only slightly.

The statement that best explains this is that the weak acid (NH4+) will combine with OH- to create a weak base (NH3). Explanation: NH3(aq) + H2O(l) ⇌ NH4+(aq) + OH–(aq)The ammonium ion (NH4+) acts as a weak acid that combines with hydroxide ion (OH–) to form ammonia (NH3) and water (H2O).

It is important to remember that ammonia is not strong enough to raise the pH significantly and that ammonium is a weak acid that won't produce a lot of hydroxides. Therefore, the pH change will be negligible. The explanation for the above reaction is as follows: NH4+ + OH– ⇌ NH3 + H2O In this equilibrium, the weak acid (NH4+) will combine with OH– to create a weak base (NH3), resulting in the pH not rising significantly.

You can read more about molarity at https://brainly.com/question/30404105#:

#SPJ11

Answer:

No the correct answer would be C12H22O11 this is because you have the same atoms listed in two different places.

Explanation:

Answer: If you wrote C6H11O5C6H11O6 as the molecular formula for sucrose, that would be incorrect. The correct molecular formula for sucrose is C12H22O11.

What is the correct molecular formula for sucrose?

The molecular formula for sucrose is C12H22O11. Sucrose is a disaccharide, which means it is made up of two simple sugar molecules. Sucrose is composed of one glucose molecule and one fructose molecule, which are bonded together by a glycosidic linkage between the anomeric carbon atoms.

If you wrote C6H11O5C6H11O6 as the molecular formula for sucrose, it would be incorrect because it doesn't accurately represent the composition of sucrose. The formula C6H11O5 represents a simple sugar molecule known as glucose, while the formula C6H11O6 represents another simple sugar molecule known as fructose. Sucrose, on the other hand, is made up of both glucose and fructose.

Therefore, the correct molecular formula for sucrose is C12H22O11.


Learn more about C12H22O11 here:

https://brainly.com/question/14315748#


#SPJ11

Answer:

C5H6

Explanation:

Alcohol formula calculation

To find the empirical formula, we need to divide the number of moles of each element by the smallest number of moles.

The ratio of carbon to hydrogen in the empirical formula is 1:1.20.

To get whole numbers, we can multiply both numbers by 5.

The empirical formula of the alcohol is C5H6.

Formula used: moles = mass / molar mass

Name of formula: Mole calculation

What to watch: Make sure to use the molar masses of the correct compounds.

To determine the empirical formula of the alcohol, we need to find the mole ratios of the elements in the compound.

First, we can find the number of moles of carbon dioxide produced:

moles of CO2 = mass of CO2 / molar mass of CO2

moles of CO2 = 0.625 g / 44.01 g/mol

moles of CO2 = 0.0142 mol

Next, we can find the number of moles of water produced:

moles of H2O = mass of H2O / molar mass of H2O

moles of H2O = 0.307 g / 18.02 g/mol

moles of H2O = 0.0170 mol

The alcohol undergoes complete combustion, so all of the carbon in the alcohol combines with oxygen to form carbon dioxide, and all of the hydrogen in the alcohol combines with oxygen to form water. Therefore, the number of moles of carbon in the alcohol is equal to the number of moles of carbon dioxide produced, and the number of moles of hydrogen in the alcohol is equal to the number of moles of water produced.

moles of C in alcohol = moles of CO2 = 0.0142 mol

moles of H in alcohol = moles of H2O = 0.0170 mol

To find the empirical formula, we need to divide the number of moles of each element by the smallest number of moles:

C: 0.0142 mol / 0.0142 mol = 1

H: 0.0170 mol / 0.0142 mol = 1.20

The ratio of carbon to hydrogen in the empirical formula is 1:1.20. We can multiply both numbers by 5 to get whole numbers:

C: 1 × 5 = 5

H: 1.20 × 5 = 6

Therefore, the empirical formula of the alcohol is C5H6.

Alcohol formula calculation.

To determine the empirical formula of the alcohol, we need to find the mole ratios of the elements in the compound.

First, we can find the number of moles of carbon dioxide produced:

moles of CO2 = mass of CO2 / molar mass of CO2

moles of CO2 = 0.625 g / 44.01 g/mol

moles of CO2 = 0.0142 mol

Next, we can find the number of moles of water produced:

moles of H2O = mass of H2O / molar mass of H2O

moles of H2O = 0.307 g / 18.02 g/mol

moles of H2O = 0.0170 mol

The alcohol undergoes complete combustion, so all of the carbon in the alcohol combines with oxygen to form carbon dioxide, and all of the hydrogen in the alcohol combines with oxygen to form water. Therefore, the number of moles of carbon in the alcohol is equal to the number of moles of carbon dioxide produced, and the number of moles of hydrogen in the alcohol is equal to the number of moles of water produced.

moles of C in alcohol = moles of CO2 = 0.0142 mol

moles of H in alcohol = moles of H2O = 0.0170 mol

To find the empirical formula, we need to divide the number of moles of each element by the smallest number of moles:

C: 0.0142 mol / 0.0142 mol = 1

H: 0.0170 mol / 0.0142 mol = 1.20

The ratio of carbon to hydrogen in the empirical formula is 1:1.20. We can multiply both numbers by 5 to get whole numbers:

C: 1 × 5 = 5

H: 1.20 × 5 = 6

Therefore, the empirical formula of the alcohol is C5H6.

Alcohol formula calculation.

To determine the empirical formula of the alcohol, we need to find the mole ratios of the elements in the compound.

First, we can find the number of moles of carbon dioxide produced:

moles of CO2 = mass of CO2 / molar mass of CO2

moles of CO2 = 0.625 g / 44.01 g/mol

moles of CO2 = 0.0142 mol

Next, we can find the number of moles of water produced:

moles of H2O = mass of H2O / molar mass of H2O

moles of H2O = 0.307 g / 18.02 g/mol

moles of H2O = 0.0170 mol

The alcohol undergoes complete combustion, so all of the carbon in the alcohol combines with oxygen to form carbon dioxide, and all of the hydrogen in the alcohol combines with oxygen to form water. Therefore, the number of moles of carbon in the alcohol is equal to the number of moles of carbon dioxide produced, and the number of moles of hydrogen in the alcohol is equal to the number of moles of water produced.

moles of C in alcohol = moles of CO2 = 0.0142 mol

moles of H in alcohol = moles of H2O = 0.0170 mol

To find the empirical formula, we need to divide the number of moles of each element by the smallest number of moles:

C: 0.0142 mol / 0.0142 mol = 1

H: 0.0170 mol / 0.0142 mol = 1.20

The ratio of carbon to hydrogen in the empirical formula is 1:1.20. We can multiply both numbers by 5 to get whole numbers:

C: 1 × 5 = 5

H: 1.20 × 5 = 6

Therefore, the empirical formula of the alcohol is C5H6.

ChatGPT

The molecular formula of a compound is the whole number multiple of its empirical formula. The empirical formula is the simplest formula. Here the empirical formula of the alcohol is C₅H₆.

The empirical formula of a compound is defined as the formula which gives the simplest whole number ratio of atoms of various elements present in one molecule of the compound.

In order to find out the empirical formula of the alcohol, we need to find the mole ratios of the elements in the compound.

moles of CO₂ = mass of CO₂ / molar mass of CO₂

moles of CO₂ = 0.625 g / 44.01 g/mol

moles of CO₂ = 0.0142 mol

Next, we can find the number of moles of water produced:

moles of H₂O = mass of H₂O / molar mass of H₂O

moles of H₂O = 0.307 g / 18.02 g/mol

moles of H₂O = 0.0170 mol

To find the empirical formula, we need to divide the number of moles of each element by the smallest number of moles:

C: 0.0142 mol / 0.0142 mol = 1

H: 0.0170 mol / 0.0142 mol = 1.20

The ratio of carbon to hydrogen in the empirical formula is 1:1.20. We can multiply both numbers by 5 to get whole numbers:

C: 1 × 5 = 5

H: 1.20 × 5 = 6

Thus the empirical formula of the compound is C₅H₆.

To know more about empirical formula, visit;

https://brainly.com/question/14044066

#SPJ2

The chemical potential energy in an endothermic reaction is best described as the energy absorbed during a reaction, which increases the stability of the products formed.

The chemical potential energy in an endothermic reaction can best be described as the energy absorbed or gained. That is, chemical potential energy in an endothermic reaction refers to the energy needed for a reaction to occur.

The energy is absorbed from the surroundings or gained by the reaction when it occurs. The energy can be in the form of heat, light, or electricity.

The energy absorbed or gained by the reaction is then used to break the bonds of the reactants and form the bonds of the products.  

Thus, in endothermic reactions, the reactants need energy to be transformed into products. The energy is then used to break the bonds of the reactants and forms the bonds of the products.

Learn more about Endothermic reactions here:

https://brainly.com/question/1160007

#SPJ11

Number of moles present in an aqueous solution can be determined by multiplying the concentration/molarity (in mol/L), by the volume (in L). Considering the units: mol/L × L = molL/L = mol.

Hence, moles (n) = concentration (c) × volume (V)

Therefore, n =cV = 0.65×0.150 = 0.0975 mol

Taking into account the definition of Avogadro's Number, 4.83×10²⁴ atoms of He are in 32.10 g of He.

The molar mass of substance is a property defined as the amount of mass that a substance contains in one mole.

Avogadro's Number is called the number of particles that make up a substance (usually atoms or molecules) and that can be found in the amount of one mole.

Its value is 6.023×10²³ particles per mole.

The molar mass of He is 4 g/mole. You can apply the following rule of three: If by definition of molar mass 4 grams of He are contained in 1 mole of He, 32.10 grams of He are contained in how many moles?

moles= (32.10 grams × 1 mole)÷ 4 grams

moles= 8.025 moles

The amount of moles of He in 32.19 grams is 8.025 moles.

You can apply the following rule of three: If by definition of Avogadro's Number 1 mole of He contains 6.023×10²³ atoms, 8.025 moles of He contains how many atoms?

amount of atoms of He= (8.025 moles × 6.023×10²³ atoms)÷ 1 mole

amount of atoms of He= 4.83×10²⁴ atoms

Finally, 4.83×10²⁴ atoms of He are present.

Learn more about Avogadro's Number:

brainly.com/question/11907018

#SPJ1

When 11.5 grams of chlorine reacts with aluminum, 14.42 grams of aluminum chloride will be formed.

According to the balanced chemical equation:

[tex]2 Al + 3 Cl_{2}[/tex] → [tex]2 AlCl_{3}[/tex]

As can be seen, two moles of aluminum chloride are produced by the interaction of two moles of aluminum and three moles of chlorine. This shows that the aluminum: chlorine mole ratio in the process is 2:3.

To find how much aluminum chloride is created when 11.5 grams of chlorine react with aluminum, we must first calculate the amount of chlorine in moles:

11.5 g [tex]Cl_{2}[/tex] / 70.9 g/mol [tex]Cl_{2}[/tex]= 0.162 mol [tex]Cl_{2}[/tex]

Since the mole ratio of aluminum to chlorine is 2:3, we know that the amount of aluminum consumed in the reaction is:

0.162 mol [tex]Cl_{2}[/tex] x (2 mol Al / 3 mol [tex]Cl_{2}[/tex]) = 0.108 mol Al

Finally, we can use the molar mass of aluminum chloride (133.34 g/mol) to calculate the mass of aluminum chloride formed:

0.108 mol AlCl3 x 133.34 g/mol [tex]AlCl_{3}[/tex]= 14.42 g [tex]2 AlCl_{3}[/tex]

Therefore, when 11.5 grams of chlorine reacts with aluminum, 14.42 grams of aluminum chloride will be formed.

Learn more about  aluminum chloride

https://brainly.com/question/29446640

#SPJ4

The radius of a barium atom is 2.68 Å.

Barium is a chemical element that is silvery-white in color and can be found in the periodic table with the symbol Ba.

The density of barium is 3.51 g/cm3, and it has a body-centered cubic unit cell that crystallizes.

Determine the length of the edge of the unit cell. Since barium has a body-centered cubic unit cell, the length of the edge of the unit cell:

Edge length = 4r /√3

Where r is the radius of the atom.

The volume of the unit cell using the formula:

Volume of unit cell = Edge length³

The number of atoms present in the unit cell. Since barium has a body-centered cubic unit cell, the number of atoms present in the unit cell :

Number of atoms in the unit cell = 2

The mass of a single atom of barium using the formula:

Mass of a single atom = Density of barium / Avogadro’s number

Where Avogadro’s number is 6.02 × 10²³ atoms/mol.

The radius of a barium atom using the formula:

Radius of barium atom = (3 × volume of unit cell / 4 × π × number of atoms in the unit cell)¹/³

The radius of the barium atom :

Edge length = 2r√3

r = (Edge length) / 2√3

Volume of the unit cell = (Edge length)³

Number of atoms in the unit cell = 2

Mass of a single atom = Density of barium / Avogadro’s number

Radius of barium atom = (3 × volume of unit cell / 4 × π × number of atoms in the unit cell)¹/³

Therefore, the radius of a barium atom is 2.68 Å.

to know more about barium refer here:

https://brainly.com/question/30888146#

#SPJ11

The best choice to favor elimination over substitution in a reaction with 2-bromopropane is sodium tert-butoxide. This is because this reagent is a stronger base, allowing for the deprotonation of 2-bromopropane.

The reaction of 2-bromopropane most favors elimination over substitution when reacted with the sodium tert-butoxide favors elimination over substitution in a reaction with 2-bromopropane.

In organic chemistry, substitution reaction occurs when an atom or a group of atoms in a molecule is replaced by another atom or a group of atoms. In contrast, elimination reactions occur when atoms or groups of atoms are removed from a molecule. The most significant difference between the two is that one leaves another behind. This means that if one group is substituted by another, then it results in a completely different compound than before.

In the reaction between 2-bromopropane and sodium tert-butoxide, the sodium tert-butoxide (Na + OC(CH3)3) serves as a strong base. The tert-butoxide ion, as a strong base, abstracts a hydrogen ion from a carbon adjacent to the bromine, leading to the formation of a reactive alkene intermediate.

The elimination of HBr from 2-bromopropane to form propene is made possible by this alkene intermediate. Therefore, the reaction most favors elimination over substitution when reacted with sodium tert-butoxide.

For more such questions on sodium tert-butoxide , Visit:

https://brainly.com/question/29742455

#SPJ11

The average atomic mass of a mixture of isotopes is affected by the relative abundance of each isotope in the mixture and the mass of each isotope.

The atomic masses of beryllium and fluorine are:

The average atomic mass of a sample containing three lithium-6 atoms and two lithium-7 atoms is 6.9418 amu.

The average atomic mass of an element is calculated by multiplying the masses of all of its isotopes by the element's relative natural abundance.

Using the atomic masses of lithium-6 (6.015 amu) and lithium-7 (7.016 amu), we can determine:

a. Atomic mass of lithium-6 = 6.015 amu

b. Atomic mass of lithium-7 = 7.016 amu

To calculate the average atomic mass of a sample containing three lithium-6 atoms and two lithium-7 atoms, we use the formula:

average atomic mass = [(mass of isotope 1 x number of atoms of isotope 1) + (mass of isotope 2 x number of atoms of isotope 2)] / total number of atoms

Substituting the values:

average atomic mass = [(6.015 amu x 3) + (7.016 amu x 2)] / 5

average atomic mass = 6.9418 amu

Learn more about the average atomic mass of an element at: https://brainly.com/question/30587714

#SPJ1

Complete question:

1. What are the factors that affect the average atomic mass of a mixture of isotopes?

2. Beryllium (Be) and Fluorine (F) have only one stable isotope. Use the periodic table to complete the following table of the average atomic mass of one atom, two atoms, and three atoms of the isotopes

4. Lithium has only two stable isotopes. Use the sim to determine the following:

a. Atomic mass of lithium-6 = amu

b. Atomic mass of lithium-7= amu

c. Average atomic mass of a sample containing three lithium-6 atoms and two lithium-7 atoms = amu

The reaction between Na2S and CuSO4 goes to completion, meaning that all of the available reactants will react. Therefore, the amount of excess reactant remaining is 0 g.

To calculate the amount of each reactant remaining, we need to look at the stoichiometric coefficients of the reaction. Na2S has a coefficient of 1, while CuSO4 has a coefficient of 2. This means that for every 1 mole of Na2S, 2 moles of CuSO4 are needed. We can use the given masses of each reactant to calculate the moles present.

For Na2S: 15.5 g x (1 mol/142 g) = 0.109 mol

For CuSO4: 12.1 g x (1 mol/159 g) = 0.076 mol

Since Na2S has a coefficient of 1, 0.109 mol is the amount of Na2S remaining. However, for CuSO4 the coefficient is 2, so we need to divide 0.076 mol by 2 to get the amount of CuSO4 remaining: 0.038 mol.

Finally, we can convert back to grams to get the amount of each reactant remaining:

Na2S: 0.109 mol x (142 g/1 mol) = 15.3 g

CuSO4: 0.038 mol x (159 g/1 mol) = 6.1 g

Therefore, the amount of excess reactant remaining is 0 g, and the amount of each reactant remaining is 15.3 g of Na2S and 6.1 g of CuSO4.

Learn more about reactants here:

https://brainly.com/question/13005466#



#SPJ11

H2O + CO2 = CO2 Plus H2O + CH4. As there are 4 moles of both oxygen and hydrogen here on side that reacts but three and two moles, respectively,  the preceding equation also isn't balanced.

Response and justification CO2 and H2O are the end results of the chemical process. Methane combustion is depicted in the chemical equation. A chemical equation's arrow, which points to a product side, indicates the reaction's direction (shows the products).

Products are the organisms that emerge from chemical processes. In a chemical reaction, reactants go through a highly energy transition stage before becoming products. This reaction results in the consumption of the reactants.

To know more about moles visit:

https://brainly.com/question/26416088

#SPJ1

The addition of low ionic strength solution (LISS) to the testing environment when performing an indirect antiglobulin test is designed to enhance the speed and sensitivity of the test.

The LISS solution reduces the time required for the agglutination reaction to occur between the patient's red blood cells (RBCs) and antiglobulin reagent (Coombs reagent).This reagent is an anti-human globulin (AHG) that attaches itself to the antibodies present on the RBCs' surface. The test is an indirect antiglobulin test, which involves incubating the patient's RBCs with a known anti-human globulin. The LISS solution's addition to the testing environment increases the speed and sensitivity of the test. It also helps in reducing the reaction time and helps detect antibodies that are present in low concentrations.

The LISS solution enhances the sensitivity of the antiglobulin test by reducing the ionic strength of the testing environment. This solution neutralizes the ionic charges on the surface of the RBCs, allowing the AHG to attach itself to the RBCs' antigens more efficiently. This, in turn, promotes more efficient agglutination and quicker antibody detection during the indirect antiglobulin test.

Learn more about antiglobulin test at:

https://brainly.com/question/30707881

#SPJ11

The percentage of radioactive isotope 11C that remains after 58.6 minutes of reaction 41.0%.

The first-order rate law equation for radioactive decay is mentioned here,

N(t) = N₀ × e^(-kt). Here,

N(t) is the amount of the radioactive substance at time t

N₀ is the initial amount of the radioactive substance

k is the rate constant for the decay process

e is the mathematical constant e (approximately 2.71828)

The rate constant k can be determined by the half-life for decay, t½, using the following equation below,

k = ln(2) / t½

In this euation, ln(2) is the natural logarithm of 2 (which  is approximately 0.69315).

In this case, the half-life of 11C is mentioned to be  20.334 minutes, so the rate constant is:

k = ln(2) / t½ = 0.69315 / 20.334 min = 0.03405 min⁻¹

Now we can utilize the rate law equation to calculate the amount of 11C remaining after 58.6 minutes. As the initial amount of 11C is 100% and the remaining amount at time t is the percentage we're looking for. Therefore percentage remaining after 58.6 minutes of reaction ,

N(t) = N₀ × e^(-kt)

N(58.6 min) = 100% × e^(-0.03405 min⁻¹ × 58.6 min)

N(58.6 min) = 41.0%

So the percentage of 11C that will be remaining after 58.6 minutes of reaction is found out to be 41.0%.

Learn more about radioactive decay :

https://brainly.com/question/1770619

#SPJ4

The energy of a photon with a wavelength of 410 nm is equal to 3.03 eV.

To calculate this, you can use the formula E = hc/λ, where h is Planck's constant, c is the speed of light, and λ is the wavelength. Plugging in the values, you get E = (6.626x10⁻³⁴J·s)(3.0x10⁸m/s)/(410x10⁻⁹m) = 4.839 × 10-19 J = 3.03 eV.

An atomic transition produces a photon with a wavelength of 410 nm. The energy of this photon is 3.03 eV.

The following formula can be used to calculate the energy of a photon.

Energy = Planck's constant x (speed of light/wavelength).

Here, Planck's constant is (h) = 6.626 × 10⁻³⁴ J s. The speed of light is (c) = 3 × 10⁸m/s (in a vacuum). The wavelength of the photon is (λ) = 410 nm.

So, let's first convert the wavelength to meters (1 nm =10⁻⁹ m).

So, 410 nm = 410 × 10⁻⁹ m = 4.10 × [tex]10^{-7}[/tex]m. Now, we can calculate the energy of the photon using the formula.

Energy = h x (c/λ)

Energy = 6.626 × 10⁻³⁴ J s x (3 × 10⁸ m/s / 4.10 × [tex]10^{-7}[/tex] m)

Energy = 4.839 × [tex]10^{-19}[/tex] J (joules)

One electron volt is equal to 1.6 × [tex]10^{-19}[/tex]J.

So, we can convert the energy from joules to electron volts.

Energy (in eV) = Energy (in J) / (1.6 × [tex]10^{-19}[/tex]J/eV)

Energy (in eV) = 4.839 × [tex]10^{-19}[/tex]J / (1.6 × [tex]10^{-19}[/tex]J/eV)

Energy (in eV) = 3.03 eV

Therefore, the energy of the photon is 3.03 eV.

For more questions related to Planck's constant.

https://brainly.com/question/2289138

#SPJ11

The number of moles of solute is 0.264 moles.

The concentration of a solution can be determined by calculating the number of moles of solute present in a given volume. The concentration of a glucose solution given is 0.750 m, which means that there are 0.750 moles of glucose present in 1 liter of the solution.

To calculate the number of moles of solute present in 352 ml of this solution, we must first convert 352 ml to liters. This is done by dividing 352 by 1000, giving 0.352 liters.

To calculate the number of moles of glucose in this volume of solution, we must multiply 0.750 moles by 0.352 liters, giving 0.264 moles.

This means that in a volume of 352 ml of a solution with a concentration of 0.750 m, there are 0.264 moles of glucose present.

Therefore, the number of moles of solute present in a volume of 352 ml of glucose solution is 0.264 moles.

To know more about moles, refer here:

https://brainly.com/question/26416088#

#SPJ11

The cranial nerves associated with gastrointestinal tract motor output are vagus nerve, glossopharyngeal nerve, and facial nerve. The correct options are option A, D, and F.

Cranial nerves are the nerves that emanate directly from the brain. There are 12 pairs of cranial nerves. These nerves are responsible for transmitting sensory information such as vision, hearing, and touch as well as motor signals like movement and coordination to different parts of the body.

The cranial nerves that are responsible for gastrointestinal tract motor output are Vagus, Glossopharyngeal, and Facial.

The vagus nerve is the 10th cranial nerve and is one of the most critical nerves for gut activity. This nerve is a major parasympathetic supply to the upper GI tract, including the stomach and small intestine.

It has both motor and sensory fibers. The parasympathetic component of the vagus nerve promotes the release of acetylcholine, which stimulates the GI muscles to contract and propel food through the digestive tract.

The vagus nerve may also control some metabolic activities, including insulin release and glucose metabolism.

The glossopharyngeal nerve is the 9th cranial nerve and plays an essential role in controlling the muscles of the pharynx and throat. This nerve's motor component is responsible for activating the pharynx and upper esophageal sphincter when swallowing, which helps in propelling food through the GI tract.

The facial nerve is the 7th cranial nerve and plays a crucial role in controlling the muscles of facial expression. It also has a sensory component, which is responsible for taste perception in the anterior two-thirds of the tongue.

Additionally, it supplies parasympathetic fibers to the salivary and lacrimal glands, which are responsible for secreting enzymes and fluids that help in digestion.

To know more about vagus nerve, refer here:

https://brainly.com/question/30175573#

#SPJ11

When propanoic acid reacts with isopropyl alcohol in the presence of heat and an acid catalyst, the ester formed is isopropyl propanoate.

This reaction is a condensation reaction, which involves the loss of a water molecule. Esters are organic compounds formed by the reaction between carboxylic acids and alcohols in the presence of an acid catalyst.

The reaction is called an esterification reaction, and it produces an ester and water. In this reaction, propanoic acid reacts with isopropyl alcohol to produce isopropyl propanoate.

The chemical reaction can be represented as follows:

CH3CH2COOH + (CH3)2CHOH → CH3CH2COO(CH3)2 + H2O

The acid catalyst used in the reaction is usually concentrated sulfuric acid, which speeds up the reaction by removing water as it is formed.

The ester is characterized by a fruity odour, which is why esters are often used in perfumes and flavorings.

The reaction is reversible, and it reaches an equilibrium point where the forward and backward reaction rates are equal. To drive the reaction forward, excess alcohol is often used.

To know more about ester, refer here:

https://brainly.com/question/10840252#

#SPJ11

The term is used to describe the electrons present in the outermost energy level is the valence electrons.

The number of the electrons in the outermost shell of the particular atom that determines its reactivity, or the tendency to form the chemical bonds with the other atoms. This is the outermost shell and is known as  valence shell, and the electrons present in it are called the valence electrons.

The electrons are on the outermost energy level of the atom are called the valence electrons. These are the electrons that involved in the bonding and the chemical reactions. The other electrons are the  core electrons.

To learn more about electrons here

https://brainly.com/question/31179419

#SPJ4

Yes, it is true that the electronic configuration of O2- is 1s2 2s2 2p6.

Arrangement of electrons in orbitals around atomic nucleus is called electronic configuration and describes how electrons are distributed in its atomic orbitals.

When oxygen atom gains two electrons to form an O2- ion, the two electrons occupy the lowest energy level available, which is the 2s orbital. Therefore, the electronic configuration of O2- is the same as that of neon (1s2 2s2 2p6), which has a full outermost shell of electrons. This noble gas configuration makes the O2- ion stable and less likely to react with other elements.

To know more about electronic configuration, refer

https://brainly.com/question/26084288

#SPJ1

For extraction, there should be an option c) lower solute solubility in the second phase.

Extraction is a process in which a solute is separated from a solution or mixture by two immiscible liquid phases. It involves two phases in which the solute has different solubilities.

In the first phase, the solute has higher solubility, meaning it dissolves more readily.

In the second phase, the solute has lower solubility, meaning it is less likely to dissolve.

In order for extraction to be successful, the solute must be differently soluble in the phases. This ensures that the solute is separated efficiently and effectively.


The process of extraction involves the formation of two liquid phases and the transfer of the solute from one phase to the other. The solute is transferred from the first phase to the second phase, where it is separated from the solution.


To summarize, extraction is a process of separating a solute from a solution or mixture by two immiscible liquid phases. It involves two phases in which the solute has different solubilities.

Therefore, for extraction, it is necessary for the solute to have a lower solubility in the second phase. and hence the correct answer is option c.

To know more about extraction, refer here:

https://brainly.com/question/12910778#

#SPJ11

a. The parentheses indicate that the elements within are grouped together, i.e., they are part of the same unit.

Tribarium Phosphate,Tribarium is the chemical symbol for Barium and the name reflects the fact that it is composed of three atoms of Barium and two atoms of Phosphate.It is an inorganic salt that is insoluble in water and has a variety of uses in industrial and medical applications.

b. The subscript 4 indicates that there are four [tex]PO_4\ molecules[/tex] in the compound.

c.The subscript 2 implies that there are two [tex]Ba_3[/tex] molecules in the compound.

d. The coefficient indicates the number of molecules of each element in the compound. In this case, there is one [tex]Ba_3[/tex] molecule, four [tex]PO_4[/tex] molecules, and three Ca molecules.

learn more about Phosphate Refer:brainly.com/question/30500750

#SPJ1

The relative abundance of each isotope in the mixture and the isotopic mass of each isotope determines the average atomic mass of an element.

The average masses of the atoms of beryllium and fluorine are found in the attachment.

The average atomic mass of lithium is 6.9418 amu.

The average atomic mass of lithium is obtained from the isotopic mass and relative abundance of the two isotopes of lithium.

Isotopic mass of lithium-6 = 6.015 amu

Isotopic mass of lithium-7 = 7.016 amu

To calculate the average atomic mass, we use the formula:

average atomic mass = [(isotopic mass of isotope 1 x number of atoms of isotope 1) + ( isotopic mass of isotope 2 x number of atoms of isotope 2)] / total number of atoms

Substituting the values:

average atomic mass of lithium = [(6.015 amu x 3) + (7.016 amu x 2)] / 5

average atomic mass = 6.9418 amu

Learn more about the average atomic mass of an element at: brainly.com/question/30587714

#SPJ1

Complete question:

1. What are the factors that affect the average atomic mass of a mixture of isotopes?

2. Beryllium (Be) and Fluorine (F) have only one stable isotope. Use the periodic table to complete the following table of the average atomic mass of one atom, two atoms, and three atoms of the isotopes

4. Lithium has only two stable isotopes. Use the sim to determine the following:

a. Atomic mass of lithium-6 = amu

b. Atomic mass of lithium-7= amu

c. Average atomic mass of a sample containing three lithium-6 atoms and two lithium-7 atoms = amu

The volume of 9.7 moles of an ideal gas at stop will be 218.8 L

What is volume of gas ?

To answer this question, we need to know the conditions of "stop." Assuming that you meant "STP" (standard temperature and pressure), which is defined as 0°C (273 K) and 1 atm (101.3 kPa), the volume of 9.7 moles of an ideal gas would be 218.8 L, according to the ideal gas law:

PV = nRT

where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature in Kelvin. At STP, the pressure is 1 atm and the temperature is 273 K. The value of R is 0.08206 L atm/mol K.

Therefore, V = nRT/P = (9.7 mol)(0.08206 L atm/mol K)(273 K)/(1 atm) = 218.8 L.

To know more about volume , visit:

https://brainly.com/question/24189159

#SPJ1

Complete question is: The volume of 9.7 moles of an ideal gas at stop will be 218.8 L.