the interval where both F(x) and g(x) are increasing is x < 0, which can be represented on the number line as follows:
To find the interval where both functions F(x) and g(x) are increasing, we need to determine where the derivative of each function is positive. A function is increasing when its derivative is positive, which means that the function is becoming larger as x increases.
The derivative of F(x) can be found by applying the derivative rules for absolute value and addition, which gives us:
F'(x) = 3x/|x|
Now, we need to determine where F'(x) is positive. This occurs when either 3x is positive and |x| is positive, or when 3x is negative and |x| is negative. Therefore, F'(x) is positive for x > 0 and x < 0.
Next, we need to find the derivative of g(x) by applying the derivative rules for subtraction and multiplication, which gives us:
g'(x) = -1 + 8
Simplifying the expression, we get:
g'(x) = 7
Since g'(x) is a constant, it is always positive, which means that g(x) is increasing for all values of x.
To find the interval where both F(x) and g(x) are increasing, we need to identify where both F'(x) and g'(x) are positive. This occurs when x < 0, as this satisfies the condition for F'(x) being positive, and g'(x) is always positive.
Therefore, the interval where both F(x) and g(x) are increasing is x < 0, which can be represented on the number line as follows:
<=====o------------------------>
x<0 x>0
In this interval, both functions are increasing as x becomes more negative.
To know more about absolute value click here:
brainly.com/question/1301718
#SPJ4
find the consent of proportionality if the equation does not represent a proportional relationship select not proportional y=x/5
The answer is k = 1/5, which represents the constant of proportionality between y and x in the equation y = x/5.
What is proportion?
Proportion is a mathematical concept that describes the equality of two ratios. In other words, it is a statement that two ratios or fractions are equal.
To determine if the equation y = x/5 represents a proportional relationship, we need to check if there is a constant of proportionality between y and x.
If there is a constant of proportionality, then we can write y = kx, where k is the constant of proportionality. In other words, the ratio of y to x is always the same constant value.
To find the constant of proportionality for the equation y = x/5, we can rearrange the equation as:
y/x = 1/5
This means that the ratio of y to x is always 1/5. Therefore, there is a constant of proportionality, which is 1/5.
So, the equation y = x/5 represents a proportional relationship, and the constant of proportionality is 1/5.
Therefore, the answer is k = 1/5, which represents the constant of proportionality between y and x in the equation y = x/5.
To know more about proportions visit:
brainly.com/question/30241688
#SPJ1
the joint probability distribution of the number x of cars and the number y of buses per signal cycle at a proposed left-turn lane is displayed in the accompanying joint probability table. y p(x, y) 0 1 2 x 0 0.010 0.015 0.025 1 0.020 0.030 0.050 2 0.050 0.075 0.125 3 0.060 0.090 0.150 4 0.040 0.060 0.100 5 0.020 0.030 0.050 (a) what is the probability that there is exactly one car and exactly one bus during a cycle? (b) what is the probability that there is at most one car and at most one bus during a cycle? (c) what is the probability that there is exactly one car during a cycle? exactly one bus? p(exactly one car)
(a) The probability that there is exactly one car and exactly one bus during a cycle is 0.020.
(b) The probability that there is at most one car and at most one bus during a cycle is 0.105.
(c) The probability that there is exactly one car during a cycle is 0.100, and the probability that there is exactly one bus during a cycle is 0.200. The probability that there is exactly one car is also 0.050.
(a) To find the probability that there is exactly one car and exactly one bus during a cycle, we need to look at the cell in the table where x = 1 and y = 1. This cell has a probability of 0.020. Therefore, the probability that there is exactly one car and exactly one bus during a cycle is 0.020.
(b) To find the probability that there is at most one car and at most one bus during a cycle, we need to add up the probabilities of the cells where either x = 0 or x = 1, and either y = 0 or y = 1. These cells are
x = 0, y = 0: 0.025
x = 0, y = 1: 0.010
x = 1, y = 0: 0.050
x = 1, y = 1: 0.020
Adding up these probabilities, we get
0.025 + 0.010 + 0.050 + 0.020 = 0.105
Therefore, the probability that there is at most one car and at most one bus during a cycle is 0.105.
(c) To find the probability that there is exactly one car during a cycle, we need to add up the probabilities of the cells where x = 1. These cells are
x = 1, y = 0: 0.050
x = 1, y = 1: 0.020
x = 1, y = 2: 0.030
Adding up these probabilities, we get
0.050 + 0.020 + 0.030 = 0.100
Therefore, the probability that there is exactly one car during a cycle is 0.100.
To find the probability that there is exactly one bus during a cycle, we need to add up the probabilities of the cells where y = 1. These cells are
x = 0, y = 1: 0.010
x = 1, y = 1: 0.020
x = 2, y = 1: 0.050
x = 3, y = 1: 0.060
x = 4, y = 1: 0.040
x = 5, y = 1: 0.020
Adding up these probabilities, we get
0.010 + 0.020 + 0.050 + 0.060 + 0.040 + 0.020 = 0.200
Therefore, the probability that there is exactly one bus during a cycle is 0.200.
Finally, the probability that there is exactly one car can also be obtained by summing the probabilities of the cells in the first row of the table
0.025 + 0.010 + 0.015 = 0.050
Learn more about probability here
brainly.com/question/11234923
#SPJ4
To which sets of numbers does −1/4 belong?
Rational numbers are numbers that can be expressed as a ratio of two integers, where the denominator is not zero. -1/4 can be expressed as a ratio of -1 and 4, so it is a rational number.
Why are numbers rational?An irrational number cannot be stated using fractions, whereas a rational number can be expressed as the ratio of two integers with the denominator not equal to zero. Irrational numbers are non-terminating and non-recurring, whereas rational numbers have terminating digits.
Is the number 0 irrational?Rational numbers contain the integer 0. It is not illogical to think that 0 is a number.
To know more Rational numbers visit:
https://brainly.com/question/24540810
#SPJ9
for a school project, 10 students are working on a skit that has 2 different roles. each role can be played by anyone, and no student can play more than one role. how many different casts are possible?
Every student may take on any part, and no student may take on more than one role. Hence, it is feasible to have 45 different casts.
In contrast, there are various techniques to select r things from a set of n objects and arrange these r objects in permutations.
The permutations formula itself states that selection should come first (nCr), followed by arrangement (r).
the given :
10 students are working on a skit,
2 different roles. each role can be played by anyone
n = 10
r = 2
nPr = nCr x r!
nCr = n!/r!(n-r)!
so,
nCr = 10!/2!(10-2)!
nCr = 10x9/2x1
nCr = 45
so, the 45 different casts are possible
To know more about permutations, click the below link
https://brainly.com/question/30649574
#SPJ4
HELP PLEASE 23 POINTS!!
The number of hours spent studying each week for 9 week is shown.
5, 8.5, 11, 13, 5.5, 9, 2, 4, 6.5
What is the value of the range for this set of data?
Answer:
Range = Highest number -Lowest number
= 13-2=11
Answer:
11
Step-by-step explanation:
Highest number = 13
Lowest number = 2
Range = highest number - lowest number
Range = 13 - 2 = 11
4. From the train station, a train travels to the city center at a constant speed of 35 miles per hour.
Mrs. Kondo is going to the city center but misses the train. She leaves the train station of an
hour later in a taxi. The taxi travels at a constant speed of 50 miles per hour.
The train and Mrs. Kondo's taxi arrive at the city center at the same time. How long did it take
the train to travel from the train station to the city center?
Answer: the train got a head start
Step-by-step explanation:
the train got a head start
in a congressional district, 55% of the registered voters are democrats. which of the following is equivalent to the probability of getting less than 50% democrats in a random sample of size 100?
A. P( z< 50 — 55/ 100 )
B. P( z< 50 — 55/ √55(45)/100)
C. P( z< 55 — 5 / √55(45)/100)
D. P( z< 50 — 55/√100(55) (45))
The correct answer to the question, "Which of the following is equivalent to the probability of getting less than 50% democrats in a random sample of size 100?" is: B. P( z < 50 — 55/ √55(45)/100).
To find the probability, we first calculate the z-score using the formula:
z = (x - μ) / σ
where x is the value (50%), μ is the mean (55%), and σ is the standard deviation.
The standard deviation can be calculated as:
σ = √(np(1-p))
where n is the sample size (100) and p is the proportion of democrats (0.55).
Now, plug in the values into the z-score formula:
z = (50 - 55) / √(100 * 0.55 * 0.45)
The probability is then found as P(z < z-score), which is represented by the option B.
More On Probability: https://brainly.com/question/24756209
#SPJ11
3 an anthropologist wishes to estimate the average height of men for a certain race of people. if the population standard deviation is assumed to be 2.5 inches and if she randomly samples 100 men, find the probability that the difference between the sample mean and the true population mean will not exceed .5 inch.
the probability that the difference between the sample mean and the true population mean will not exceed 0.5 inch is 0.9544
We can use the central limit theorem to approximate the distribution of the sample mean. Since the sample size is large (n=100), the sample mean follows approximately a normal distribution with a mean equal to the population mean and a standard deviation equal to the population standard deviation divided by the square root of the sample size (i.e., 2.5/sqrt(100) = 0.25).
Let X be the sample mean, then we want to find P(|X - μ| ≤ 0.5), where μ is the population mean.
Using the standard normal distribution, we can standardize X as follows:
Z = (X - μ) / (σ / sqrt(n)) = (X - μ) / 0.25
So we want to find P(|Z| ≤ 2), where Z follows a standard normal distribution.
Using a standard normal distribution table or calculator, we find that P(|Z| ≤ 2) = 0.9544.
Therefore, the probability that the difference between the sample mean and the true population mean will not exceed 0.5 inch is 0.9544
Learn more about mean here
https://brainly.com/question/15323584
#SPJ4
Problem
You're playing a game where you defend your village from an orc invasion. There are
3
33 characters (elf, hobbit, or human) and
5
55 defense tools (magic, sword, shield, slingshot, or umbrella) to pick from.
Answer: 2+ 2
Step-by-step explanation:
no problem
the survey of 72 students about their favourite fruit apple banana guava grapes 12 18 6 36. draw a circle and divide it into 12 parts and represent the data given as a pie chart .
The slice for apple will have an angle of 60 degrees, the slice for banana will have an angle of 90 degrees, the slice for guava will have an angle of 30 degrees, and the slice for grapes will have an angle of 180 degrees.
What is pie chart?A pie chart is a circular statistical graphic, which is divided into slices to illustrate numerical proportion. In a pie chart, the arc length of each slice is proportional to the quantity it represents. Pie charts are commonly used in business, media, and other fields to represent percentages, ratios, and proportions. They are useful for quickly understanding the relative sizes of different categories or groups in a dataset.
Here,
To create a pie chart from the given data, we first need to calculate the angle of each slice of the pie chart. To do this, we use the following formula:
Angle for a slice = (Frequency of the category ÷ Total frequency) × 360°
Using the given data, we can calculate the angle of each slice as follows:
Angle for apple = (12 ÷ 72) × 360° = 60°
Angle for banana = (18 ÷ 72) × 360° = 90°
Angle for guava = (6 ÷ 72) × 360° = 30°
Angle for grapes = (36 ÷ 72) × 360° = 180°
Now, we can draw a circle and divide it into 12 parts (each representing 30 degrees). Then, we can draw the slices of the pie chart using the angles we calculated above.
To know more about pie chart,
https://brainly.com/question/29148468
#SPJ1
5 fewer than the product of 7 and a number is no more than 50.
Answer:
x ≤ 55/7
Step-by-step explanation:
7x - 5 ≤ 50
7x ≤ 55
x ≤ 55/7
Please help!!!! Will mark Brainliest! The two lines graphed on the coordinate grid represent a system of equations. What is the x-coordinate of the ordered pair that best represents a solution to both equations?
Step-by-step explanation:
Without seeing the graph, it's difficult to determine the exact solution to the system of equations. However, the point of intersection between the two lines represents a solution that satisfies both equations. To find the x-coordinate of this point, you can use algebraic methods, such as substitution or elimination, to solve for the value of x.
PLSSSS HELP IF YOU TURLY KNOW THISSS
Given:-
[tex] \tt \: x - 3 = 2[/tex][tex] \: [/tex]
Solution:-
[tex] \tt \: x - 3 = 2[/tex][tex] \: [/tex]
[tex] \tt \: x = 2 + 3[/tex][tex] \: [/tex]
[tex] \boxed{ \tt{ \red{ \: \:x = 5 \: }}}[/tex][tex] \: [/tex]
━━━━━━━━━━━━━━
hope it helps⸙
seven and forty-four hundredths
Answer:
[tex]744x100=7,440[/tex]
Step-by-step example
all to do this is to 744x10
and it would help if you got this simple answer I hope this helps:D
Draw a picture of the problem in your notebook and then submit your answer after you have calculated it.
HELP ASAP TIMED - GIVING 35 PTS
An observation tower is 75 m high. A support wire is attached to the tower 20 m from
the top. If the support wire and the ground form an angle of 46 degrees, what is the
length of the support wire?
Careful here. A support wire is attached to a tower ON THE TOWER, not in outer space and is anchored in the ground. Think of two wires holding up a newly planted tree. They are not at the top of the tree, but are attached part way down.
Using trigonometry, we can determine that the length of the support wire is approximately 91.7 meters, by using the tangent function of the angle and solving for the hypotenuse of the right triangle formed by the tower, the support wire, and the ground.
Question 2 Which of the following is an important advantage of experiments over Select all that apply: observational studies? Check all that apply. points A 0 Ensuring that each subject in the trial receives the best possible treatment Isolating the effects of _ specific treatment c 0 Guaranteeing that approximately the same number of subjects is assigned to each treatment group Controlling for lurking variables to have = stronger case for causation
An important advantage of experiments over observational studies is that experiments can control for lurking variables to have a stronger case for causation. Another advantage is that experiments can isolate the effects of a specific treatment.
What is an experiment?
An experiment is a scientific study that is designed to test a hypothesis or investigate a cause-and-effect relationship between variables. Experiments allow researchers to manipulate one variable (independent variable) and observe the effect on another variable (dependent variable) while controlling for other variables that may affect the outcome (lurking variables).
What are observational studies?
Observational studies are research designs that observe and collect data from participants without manipulating any variables. In observational studies, the researchers only observe and record what happens naturally without intervening in any way. Observational studies are used when experiments are not feasible or ethical.
What are the advantages of experiments over observational studies?
Experiments have several advantages over observational studies. Some of the advantages include:
Control over variables: Experiments allow researchers to control for variables that may affect the outcome by manipulating one variable (independent variable) and keeping all other variables constant. This helps researchers to establish a cause-and-effect relationship between variables.
Isolation of specific effects: Experiments can isolate the effects of a specific treatment by comparing outcomes between treatment groups and control groups. This helps researchers to determine the effectiveness of the treatment with a high degree of accuracy.
Similarity between treatment groups: Experiments can ensure that approximately the same number of subjects is assigned to each treatment group, thereby minimizing the effects of individual differences on the outcome. This increases the statistical power of the study and reduces the likelihood of obtaining spurious results.
Control of extraneous variables: Experiments can control for lurking variables (extraneous variables) that may affect the outcome by manipulating one variable (independent variable) and keeping all other variables constant. This helps researchers to establish a strong case for causation.
Learn more about "observational studies": https://brainly.com/question/6349766
#SPJ11
an obtuse triangle with area 12 has two sides of lengths 4 and 10. find the length of the third side.
3cm is the length of the third side.
Given that an obtuse triangle with area 12 has two sides of lengths 4 and 10.
To find the length of the third side, we can use the formula for the area of a triangle; Area of a triangle = 1/2 × base × height, where base and height are perpendicular to each other.
Considering 4 and 10 as the base and height of the triangle respectively, the area of the triangle will be;
Area of the triangle = 1/2 × 4 × 10Area of the triangle
= 20 cm²
But given that the area of the triangle is 12 cm².
Thus, 20 cm² = 1/2 × 4 × 10 ⇒ length of the third side = 3 cm
To know more about obtuse triangle refer here:
https://brainly.com/question/1581660#
#SPJ11
find an algebraic expression for the particle's velocity vx at a later time t . express your answer in terms of the variables c , t , v0x , and m .
The algebraic expression for the particle's velocity vₓ at a later time t is v(t) = ct²/2m +v₀ₓ.
Given that,
c = speed of light
t = time
v₀ₓ = initial velocity of particle
m = mass of particle
Velocity and acceleration are related through time. Acceleration is the rate of change of velocity, which is represented graphically as the slope of the velocity vs. time line. Velocity can be represented as the area underneath an acceleration vs. time line.
Newton's second law declares that an object having mass m will accelerate due to a net force (F) will accelerate at a rate of:
α = F/m
Therefore, the function that describes the acceleration at any point in time of the particle is:
α(t)=ct/m
The velocity function is the integral of the acceleration function, so we get:
v(t)= ∫ct/m dt
= ct²/2m +C
where the constant C is the initial velocity of the particle at time t=0. Therefore, the velocity function representing the velocity at any point in time is:
v(t) = ct²/2m +v₀ₓ
Therefore, the algebraic expression for the particle's velocity vₓ at a later time t is v(t) = ct²/2m +v₀ₓ.
Learn more about the velocity here:
https://brainly.com/question/30559316.
#SPJ12
How to explain what angle is made by an acute angle, and a right angle
Find the missing angles in the parallelogram.
HELP PLEASEE
Answer:
x = 65° , y = 115° , z = 65°
Step-by-step explanation:
consecutive angles in a parallelogram are supplementary , then
x + 115° = 180° ( subtract 115° from both sides )
x = 65°
opposite angles in a parallelogram are congruent , then
y = 115° and z = x = 65°
Answer:
See below!
Step-by-step explanation:
Opposite angles in a parallelogram are equal.So,
y = 115°Adjacent angles in a parallelogram add up to 180 degrees.So,
y + x = 180°
115 + x = 180
Subtract 115 from both sidesx = 180 - 115
x = 65°Again,
z = x (Opposite angles)
So,
z = 65°[tex]\rule[225]{225}{2}[/tex]
What is the endpoint of a line segment with these points? Endpoint: Z(–21, 15) Midpoint: M(–13, 29) (–5, 43) (–17, 22) (–27, 21) (–29, 1)
Answer: A - (-5, 43)
Step-by-step explanation:
what is the value of f(40,20) and what does it represent? find an estimate for fv(40,20) and ft(40,20).
fv(40,20) ≈ (f(40.1,20) - f(40,20))/0.1 , ft(40,20) ≈ (f(40,20.05) - f(40,20))/0.05 are the required functional estimations of a given representations.
However, we can estimate the partial derivatives with respect to x (fv) and y (ft) at the point (40,20) using the definition of partial derivatives:
fv = ∂f/∂x ≈ (f(40+h,20) - f(40,20))/h
where h is a small increment in the x direction. Similarly,
ft = ∂f/∂y ≈ (f(40,20+k) - f(40,20))/k
where k is a small increment in the y direction.
To estimate fv(40,20) and ft(40,20), we need to choose small values of h and k and evaluate the function at the corresponding points. Let's say h = 0.1 and k = 0.05:
fv(40,20) ≈ (f(40.1,20) - f(40,20))/0.1
ft(40,20) ≈ (f(40,20.05) - f(40,20))/0.05
We can then use these estimates to approximate the value of f(40.1,20.05) using the first-order Taylor approximation:
f(40.1,20.05) ≈ f(40,20) + fv(40,20)0.1 + ft(40,20)0.05
Note that this is an approximation and may not be very accurate if the function is highly nonlinear or has discontinuities. However, it can give us a rough idea of the value of f(40,20) and how it changes with small variations in x and y.
To know more about first-order Taylor click here:
brainly.com/question/14787721
#SPJ4
the middle 50% of the distribution for x, the bounds of which form the distance represented by the iqr, lies between what two values? (round your answers to two decimal places.) 171.33 incorrect: your answer is incorrect. acres (smaller value) 176.67 incorrect: your answer is incorrect. acres (larger value)
The middle 50% of the distribution for X, or the IQR, lies between 87 acres and 261 acres.
What is interquartile range?A measurement of the dispersion or variability of a dataset is the interquartile range (IQR). The 75th and 25th percentiles of the data, or the difference between the upper and lower quartiles, are used to define it. The range of the middle 50% of the data is represented by it, in other words.
The IQR is a reliable indicator of the spread of the data that, in comparison to the range or standard deviation, is less susceptible to outliers or extreme values. For this reason, it is valuable in statistics. It is frequently employed as a measure of variability when the data contains extreme values or when the distribution is not normal.
Given that, mean = 174 and standard deviation = 58 acres.
Using the quartile values we have:
Q1 = mean - (1.5 * standard deviation)
Q1 = 174 - (1.5 * 58) = 87 acres
Q3 = mean + (1.5 * standard deviation)
Q3 = 174 + (1.5 * 58) = 261 acres
Hence, the middle 50% of the distribution for X, or the IQR, lies between 87 acres and 261 acres.
Learn more about interquartile range here:
https://brainly.com/question/29174396
#SPJ1
The complete question is:
how to find the volume of the prism big ideas
Answer:
To find the volume of a prism, you need to multiply the area of the base by the height of the prism. Here are the steps:
Identify the shape of the base of the prism. It could be a rectangle, square, triangle, hexagon, or any other polygon.
Find the area of the base of the prism. The formula for finding the area of different shapes are:
Rectangle: A = length x width
Square: A = side x side
Triangle: A = (base x height) / 2
Hexagon: A = (3 x √3 x side²) / 2 (where side is the length of one of the sides of the hexagon)
Determine the height of the prism. This is the perpendicular distance between the two parallel bases.
Multiply the area of the base by the height of the prism. The formula is:
Volume = Area of Base x Height
For example, if the base of the prism is a rectangle with length 4 cm and width 5 cm, and the height of the prism is 10 cm, the volume of the prism would be:
Volume = 4 cm x 5 cm x 10 cm
= 200 cubic cm
Therefore, the volume of the prism is 200 cubic cm.
What are the values of x and y? *
Pls help!
Answer:
x = 8
y = 12
Step-by-step explanation:
m∠A = sin⁻¹(9/15) = 36.87⁰
cos36.87 = y/15
y = 15(cos36.87) = 12
sin36.87 = 12/(12+x)
12 + x = 12/(sin36.87)
x = 12/(sin36.87) - 12 = 8
Question 6(Multiple Choice Worth 2 points)
(Appropriate Measures MC)
The line plot displays the cost of used books in dollars.
A horizontal line starting at 1 with tick marks every one unit up to 9. The line is labeled Cost in Dollars, and the graph is titled Cost of Used Books. There are two dots above 1, 2, 3, 5, and 6. There are four dots above 7.
Which measure of center is most appropriate to represent the data in the graph, and why?
The median is the best measure of center because there are no outliers present.
The median is the best measure of center because there are outliers present.
The mean is the best measure of center because there are no outliers present.
The mean is the best measure of center because there are outliers present.
So, the correct option is: The median is the best measure of center because there are outliers present.
What is line plot?A line plot is a type of graph that is used to display data along a number line. In a line plot, each data point is represented by a dot or mark placed above the corresponding value on the number line. Line plots are commonly used to represent small to moderate-sized data sets, especially those with discrete values or categories. The line plot typically consists of a horizontal line, called the axis, representing the numerical values of the data, with marks or dots above the line indicating the frequency or count of each value in the data set. Each mark or dot is placed directly above the value on the number line that it represents.
Here,
Since the data in the graph is skewed to the right, there are outliers present. Outliers are data points that are significantly different from the other values in the data set. Therefore, the median is the most appropriate measure of center to represent the data in the graph because it is less affected by outliers compared to the mean.
To know more about line plot,
https://brainly.com/question/11844514
#SPJ1
The yard pictured below has algebraic expressions for its side lengths, in metres.
Find a simplified algebraic expression for the perimeter of the yard.
Use your expression to find the perimeter in meters, if the value of x=3 m . Show your steps.
The simplified algebraic expression for the perimeter of the yard is 28m+10x, and if x=3m, then the perimeter is 58m.
The simplified algebraic expression for the perimeter of the yard is 28m+10x, and if x=3m, then the perimeter is 58m.
In the given figure, the yard is in the shape of a rectangle with dimensions (4x - 6) m and (2x + 3) m. The perimeter of a rectangle is the sum of the lengths of all four sides, which can be expressed as:
Perimeter = 2(Length + Width)
Perimeter = 2(4x - 6 + 2x + 3) m
Perimeter = 2(6x - 3) m
Perimeter = 12x - 6 m
So, a simplified algebraic expression for the perimeter of the yard is 12x - 6 m.
To find the perimeter in meters when x = 3 m, substitute x = 3 into the algebraic expression for perimeter:
Perimeter = 12(3) - 6 m
Perimeter = 30 m
Therefore, the perimeter of the yard when x = 3 m is 30 meters.
To learn more about perimeter please click on below link
https://brainly.com/question/7486523
#SPJ1
at school has 320 girls and 250 boys. the probability that a girl is left-handed is 0.2 the probability that a boy is left-handed is 0.1 estimate the number of left-handed students in the school.
Answer:
Step-by-step explanation:
E(lh girls) [tex]=0.2\times 320=64[/tex]
E(lh boys) [tex]=0.1 \times 250 =25[/tex]
Estimated total left handed students [tex]=64+25=89[/tex]
a high school has 48 players on the football team. the summary of the players' weights is given in the box plot. what is the interquartile range of the players' weights?
By looking at the box plot, we can determine that the IQR is 40 pounds.
The interquartile range (IQR) of the players' weights is the difference between the upper quartile (Q3) and the lower quartile (Q1). The upper quartile is the value that 75% of the players' weights are below, and the lower quartile is the value that 25% of the players' weights are below.
Calculating the IQR requires the following steps:
In this case, the interquartile range of the players' weights is the difference between the upper quartile (Q3) and the lower quartile (Q1). By looking at the box plot, we can determine that the IQR is 40 pounds.
For more such questions on Interquartile range (IQR).
https://brainly.com/question/27683438#
#SPJ11
Some aliens on planet zenith leave their planet to explore other planets in the universe. 120 aliens have left planet zenith over the past 3 years. Write an expression to model the change in aliens per year on planet zenith. Evaluate your expression and give the answer in the context of the problem
Alien is an extraterrestrial species or a hypothetical species that lives beyond the planet Earth. They are beings from other planets that can travel in spacecraft. They are often depicted as having unique or supernatural powers that are beyond those of humans. The question given is about an alien species that leaves its planet to explore other planets. We are given the information that 120 aliens have left planet zenith over the past 3 years. We need to write an expression to model the change in aliens per year on planet zenith. We can write the following expression:Change in aliens per year = Total number of aliens left / Number of yearsThe total number of aliens left in the past 3 years is 120. Therefore,Total number of aliens left = 120Number of years = 3Substituting the values in the above expression, we get:Change in aliens per year = 120 / 3Change in aliens per year = 40 aliens per yearThe expression to model the change in aliens per year on planet zenith is 40 aliens per year. This means that 40 aliens are leaving planet zenith each year to explore other planets in the universe.
The average change in aliens per year can be calculated using the above expression. The change in aliens per year is 40 aliens. Hence, every year 40 aliens are leaving planet Zenith to explore other planets in the universe.
To model the change in aliens per year on planet Zenith, an expression can be formed from the given data. Let's look into the steps to model the change in aliens per year on planet zenith.
Step 1: We are given that 120 aliens have left planet zenith over the past 3 years.
Step 2: To find the change in aliens per year, we can divide the total number of aliens who left the planet over the past 3 years by the number of years.
Change in aliens per year = (120 aliens) / (3 years)
Step 3: Simplifying the above expression we get,Change in aliens per year = 40 aliens per year
Therefore, the expression to model the change in aliens per year on planet Zenith is 40 aliens per year. This implies that every year 40 aliens are leaving planet Zenith to explore other planets in the universe.
Evaluation: As per the given problem, 120 aliens have left planet Zenith over the past 3 years.
for such more question on average
https://brainly.com/question/20118982
#SPJ11