Answer:
C
Explanation:
The azimuthal quantum number can take values from 0 to (n-1)
So in answer C n= 3, l can take values between 0
and 2.
l can't be 3.
ml can take values from -l to +l.
Hope you understood
Help please With this :)))
Answer: 3
Explanation:
A gas has a volume of 1140 ml at 37 ºC and 620 mm Hg pressure. Calculate its volume at STP.
1.900
2.800
3.819
4.1000
Answer:
3. 0.819L (819 mL)
Explanation: Before we go about solving this, we need to do some conversions prior to using the gas law, the gas law is as follows...
P(atm)*V(L)=n(mol)*r(constant)*T(in kelvin)
So here are all the conversions you need.
620 mm Hg -> 0.816 atm
1140 mL -> 1.14 L
37 C -> 310.15 K
After plugging in our new converted values, we will proceed to solve the number of moles of the gas present, our n value, so our equation will look like this...(Note: Constant r in this case is 0.08206 L*atm/K*mol)
(0.816 atm)(1.14 L) = n(0.08206)(310.15)
Solving for n we get 0.03653 moles.
Now our second part is to figure out the volume AT STP (standard temperature/pressure). In the STP conditions, your temperature defaults to 0 C (273.15 K) and 1 atm. Now there is an easier way to do this, but I'll also show the more comprehensive way. Here is the easier method...
Since 1 mole of every gas occupies 22.4 L at STP, we can simply multiply this by our number of moles. So (22.4L)(0.3653 mol) to give us 0.818272.
However, a more accurate answer can be given like this...
Plugging n back into the same equation and this time resetting pressure to 1 atm and temperature to 273.15 K and conserving our number of moles we get...
(1 atm)(v) = (0.03653 mol)(0.08206)(273.15 K)
v = (0.03653)(0.08206)(273.15)
v = 0.8188 L = 0.819 L or 819 mL
Describe the experiment that Chadwick conducted which led to his discovery of the neutron.
Answer:
James Chadwick conducted an experiment where he assailed the element Beryllium with alpha particles that came from the radioactive decay of Polunium. The experiment results showed highly penetrating radiation emitted from the Beryllium. In this, Chadwick proposed that radiation consisted of uncharged particles, which were later founded as neutrons.
How does the structure of compounds determines the properties of the compounds?
All of these properties are due to the chemical structure of the compound. The chemical structure includes the bonding angle, the type of bonds, the size of the molecule, and the interactions between molecules. Slight changes in the chemical structure can drastically affect the properties of the compound.
Stems are important plant structures because they _________.
A.
are the main sites of photosynthesis for plants
B.
are the only site of water and nutrient transport
C.
allow plants to absorb water and nutrients from the soil
D.
give the plant structure and support
Answer:
c
Explanation:
allow plants to absorb water and nutrients from the soil
Thermal energy is associated with _____.(1 point)
electric charge
particle motion
bond strength
substance volume
Answer:
see below
Explanation:
1. particle motion
2. The particles of a liquid can slide past one another.
3. the kinetic energy required to break forces between particles
4. increasing its temperature until it transitions from a solid to a liquid
5. A liquid becomes a gas.
[quizlet: captncrun]
Thermal energy is in the form of heat and light is always associated with the random motion of atoms and molecules. That form of kinetic energy is used to the rise in temperature.
The energy is released from the particles that are heated and collide with each other. This takes place by the particle motion.Hence the option B is correct.
Learn more about the Thermal energy is associated with.
brainly.com/question/16953428.
What’s the answer to this
Answer: 5
Explanation:
please brainliest me
I believe it is 3
Answer:
Explanation:
Question 10
What is this structure name?
CH3 – CH2 - CH
CH – CH – CH2 - CH2
CH; CH – CH, -CH,
СН
CH3
cosh(-cosh(-CH
Simplify the expression using the symmetry of hyperbolic functions
cosh(cosh(CH))
Simplify the expression using the symmetry of hyperbolic functions
the answer is cosh(cosh(CH))
HELPP PLISS :(
Achemist analyzes two samples. One sample contains 14 g of element X and 6.0 g of element Y. The second sample contains 28 g of element X and 6.0 g of element Y. Does it appear that the two samples are the same substance? Explain the reasons for your answer.
A chemist analyzes two samples. One sample contains 14 g of element X and 6.0 g of element
what does feldspar mean?
Answer:
an abundant rock-forming mineral typically occurring as colorless or pale-colored crystals and consisting of aluminosilicates of potassium, sodium, and calcium.
Explanation:
Answer:
Feldspars are a group of rock-forming aluminium tectosilicate minerals, containing sodium, calcium, potassium or berium
True or false?
Increasing the temperature can help slow down chemical reactions by "burning away" unnecessary molecules
Which of these properties is mainly responsible for the difference in
melting rate between salt water and fresh water?
O acidity
O temperature
G
O density
O mass
Answer:
Density is mainly responsible for the difference in melting rate between salt water and fresh water.
Explanation:
Hoped this helped.
a hot air balloon has a volume of 875L. what is the original temperature of the balloon if its volume changes to 955 L when heated to 56
Answer:
using Charles law
v1/t1= v2/ t2
Explanation:
875/t1=955/56+273
t1= 329* 875/955
t1= 302.82k
The initial temperature of the hot air balloon can be calculated from Charles's law. The initial temperature of the balloon was, 51.3 °C.
What is Charles's law?According Charles's law, at constant pressure, the temperature and volume of a gas is in direct proportionality. Thus volume increases with an increase in temperature. Therefore V/T = a constant.
Let V₁ and T₁ be the initial volume and initial temperature and V₂ and T₂ be the final volume and temperature respectively. Thus we can write the relation as:
V₁ /T₁ = V₂/T₂ .
Given that the initial and final volume are 875 L and 955 L respectively. The final temperature is 56 °C. Thus the initial temperature is calculated as :
T₁ = V₁T₂/V₂
= (875 L × 56 °C )/955 L
= 51.3 °C.
Hence, the initial temperature of the hot air balloon was 51.3 °C.
To find more on Charles's law, refer here:
https://brainly.com/question/16927784
#SPJ5
If a barometer were built using water (d=1.0 g/cm3) instead of mercury (d=13.6 g/cm3), would the column of water be higher than, lower than, or the same as the column of mercury at 1.00 atm? If the level is different, by what factor? Explain.
Mercury is a compound denser than water and when this happen, it stays lower.
So, in this case, water stays higher than mercury because its density is low.
The level is different by a factor of 13.6 times taller.
He says that because the oxygen atoms are split between two different molecules in the products, the equation does not support the law of conservation of matter. Is your friend right? explain your answer?
According to conservation of matter, there should be equal amounts of all elements on both the reactant and product side.
Reactant:
1 Ca
1 C
1 O
Product:
1 Ca
1 C
3 O
Therefore, your friend is right because the law of conservation of matter is not followed in this chemical equation.
(e) alkaline earth element with the least massive atoms
The alkaline earth element with the least massive atoms is beryllium (Be). Beryllium, located in Group 2 of the periodic table, possesses the lowest atomic number and atomic mass within the alkaline earth elements.
Among the alkaline earth elements, which are found in Group 2 of the periodic table, beryllium (Be) stands out for having the least massive atoms. The periodic table is organized in a way that elements are ordered by increasing atomic number, which corresponds to the number of protons in an atom's nucleus. For alkaline earth elements, the atomic numbers increase from beryllium (Be) with atomic number 4 to radium (Ra) with atomic number 88.
Atomic mass, on the other hand, takes into account the sum of protons and neutrons in an atom's nucleus, as electrons contribute very little to the overall mass. Since beryllium (Be) has the lowest atomic number in the alkaline earth group, it also has the fewest protons and neutrons among its isotopes, leading to a lower atomic mass compared to other elements in the same group.
To learn more about periodic table
brainly.com/question/28747247
#SPJ3
A mixture of two gases with a total pressure of 2.78 atm contains 0.70 atm of Gas A. What is the partial pressure of Gas B in atm
Answer:
2.08 atm
Explanation:
Here we use Dalton's Law of Partial Pressures: Pa+Pb=Ptotal. 0.70 atm + Pb = 2.78 atm. To find the missing pressure of gas b we subtract .7 from the 2.78
name 2 elements that are liquid at room temperature and describe their colour
Answer:
Bromine
Mercury
Bromine (symbol Br and atomic number 35) is a reddish-brown liquid, with a melting point of 265.9 K. Mercury (symbol Hg and atomic number 80) is a toxic shiny silvery metal, with a melting point of 234.32 K.
help! giving brainliest.
Answer:
A
Explanation:
will group 2 elements gain electrons to bond with non-metals in group 16 in a 2:1 ratio
375cm³ of a gas has a pressure of 770 mm Hg, find it Volume if the pressure is reduced to 750 mm Hg
Answer:
Explanation:
Givens
v1 = 375 cm^3
P1 = 770 mm Hg
V2 = ?
P2 = 750 mm Hg
Formula
V1 P1 = V2 P2
Solution
375 * 770 = V2 * 750 Combine the left
288750 = V2 * 750 Divide both sides by 750
288750/750 = V2
V2 = 385
Hey :3 please help with this. Will mark brainlist if you’re right
Answer: 4
Explanation:
How many moles of Mg are needed to react with 20 mol O2?
What is the percent composition of Be(OH)2?
Answer:
Ba 80.148%. H 1.77% O 18.657%
please fast but right no link or bot
The table below provides data about a gas sample. Which of the following can be determined using the data?
Volume 2.0 L
Pressure 3.6 atm
Temperature 323 K
the chemical composition of the gas
the condensation temperature of the gas
the number of moles in the sample
the distance between gas molecules in the sample
Explanation:
Tabel di bawah ini memberikan data tentang sampel gas. Manakah dari berikut ini yang dapat ditentukan dengan menggunakan data? Volume 2,0 L Tekanan 3,6 atm Suhu 323 K komposisi kimia gas suhu kondensasi gas jumlah mol dalam sampel jarak antar molekul gas dalam sampel
Explanation:
....
해바라기해바라기해바라기해바라기
20 points! Please Help!!
Based on what you have read what is the opportunity cost of the glass-making company's decision?
a higher quaity tem
a greater proft
a loss of equipment
a longer production time
Answer:
a greater profit......
A scientist wants to make a solution of tribasic sodium phosphate, Na3PO4, for a laboratory experiment. How many grams of Na3PO4 will be needed to produce 400. mL of a solution that has a concentration of Na ions of 1.00 M
Answer:
21.86 grams
Explanation:
It is important to note that for every mol of Na3PO4 there is, 3 mols of Na ions are produced.
Na+=1m(0.4l), so mols of Na3PO4= 0.4/3= 0.13333... mols
the molar mass of Na3PO4 is 163.94 grams/mol. 0.1333*163.94=21.86 grams of Na3PO4.
If acid comes in contact with your skin, why must you flush the area with plenty of cold water, rather than neutralizing the acid with a base?
Answer:
that would just create a bigger mess if you flush it with ice water it can reduce swelling and help dull your nerves
Explanation:
If acid comes in contact with your skin, because having an excessive amount of base can also be harmful. Acid is weakened and rendered ineffective by water.
What is acid?A chemical species known as an acid absorbs electrons and/or provides protons or hydrogen ions. When a hydrogen atom is bound to an acid, it can release (dissociate) and produce a cation as well as an anion in water. A substance's acidity and solution pH increase according to the amount of hydrogen ions it produces.
There are various definitions for acids. When someone uses the term "an acid," they typically mean an Arrhenius or Brnsted-Lowry acid. Often, a Lewis acid being referred to as a "Lewis acid." If acid comes in contact with your skin, because having an excessive amount of base can also be harmful. Acid is weakened and rendered ineffective by water.
Therefore, if acid comes in contact with your skin, because having an excessive amount of base can also be harmful. Acid is weakened and rendered ineffective by water.
To know more about acid, here:
https://brainly.com/question/29796621
#SPJ3
Which ion with a
+2
charge has the electron configuration
1s2 2s2 2p6 3s2 3p6 4s2 3d10 4p6?
Answer:
atomic # 38 or strontium (Sr)
Explanation:
Which ion with a
+2charge has the electron configuration
1s2 2s2 2p6 3s2 3p6 4s2 3d10 4p6?
ADD THE ELECTRONS AND ADD 2 MORE FOR THE +2 CHARGE
so
2 +2 +6 +2 +6 +2 + 10 + 6 +2
so if it is now neutral (you added 2 e's to ofsetr the +2 charge) it has 38
protons, so it is atomic # 38 or strontium (Sr)
A mixture of two or more metals is called: A) Mixture B) Compound C) solution D) alloy
Answer:
C
Explanation:
Mixture of 2 or more metals is a compound
example is water which is made up of hydrogen and oxygen.