Choose two non-renewable resources from the article and explain why these are non-renewable.​

Answers

Answer 1

Two non-renewable resources are coal and petroleum. A natural resource that cannot be easily replaced by natural means quickly enough to keep up with use is referred to as a non-renewable resource (also known as a finite resource).

What are non-renewable resources?

A natural resource that cannot be easily replaced by natural means quickly enough to keep up with use is referred to as a non-renewable resource (also known as a finite resource). Fossil fuels made of carbon are one instance. With the use of heat and pressure, the original biological matter transforms into a fuel like petrol or oil. Although individual elements are always conserved, earth minerals and metal ores, fossil fuels (coal, petroleum, and natural gas), and groundwater in some aquifers are all regarded as non-renewable resources (except in nuclear reactions, nuclear decay or atmospheric escape). Coal, crude oil, and natural gas are examples of natural resources that take thousands of years to naturally produce and cannot be replaced as quickly as they are used up.

How is petroleum formed?

The remains of animals that have been submerged for millions of years deep within the earth's crust give rise to petroleum.

These species, which include different kinds of plants and animals, progressively dissolved over time.

These remnants turned into petroleum as a result of the intense heat, pressure, and lack of air.

Although petroleum is manufactured over millions of years, we also use it at a faster rate than it is created.

They are therefore non-renewable resources.

To know more about fossil fuels, visit:

https://brainly.com/question/3371055

#SPJ1

Complete question:

Choose two non-renewable resources from the article and explain why these are non-renewable.​

a) Water

b) Electricity

c) Wind

d) Petroleum

e) Coal


Related Questions

Liquid nonane (C9H20) reacts with gaseous oxygen to form gaseous carbon dioxide and liquid water. What is the balanced chemical equation?

Answers

The final balanced chemical equation is:

C₉H₂₀(l) + 14O₂(g) → 9CO₂(g) + 10H₂O(l)

What is a balanced chemical equation?

A balanced chemical equation is a representation of a chemical reaction using chemical formulas and coefficients to show the reactants and products involved in the reaction.

To balance a chemical equation, coefficients are placed in front of the chemical formulas to ensure that the number of atoms of each element is equal on both sides of the equation. This results in a balanced equation that accurately represents the reactants and products involved in the reaction, and their relative amounts.

To balance the chemical equation, we need to make sure that the number of atoms of each element is the same on both sides of the equation.

Let's start by counting the number of atoms of each element in the reactants and products:

Reactants:

C₉H₂₀(l) → 9 carbon atoms (C), 20 hydrogen atoms (H)

O₂(g) → 2 oxygen atoms (O) per molecule, so 14 O₂ molecules give 28 oxygen atoms (O)

Products:

9CO₂(g) → 9 carbon atoms (C), 18 oxygen atoms (O)

10H₂O(l) → 20 hydrogen atoms (H), 10 oxygen atoms (O)

Now, we can see that the number of carbon and hydrogen atoms are already balanced, but we need to balance the oxygen atoms.

To do so, we can see that 14 O₂ molecules give us 28 oxygen atoms, which means we need 28/2 = 14 molecules of CO₂ and 14 molecules of H₂O to balance the equation.

The final balanced equation is:

C₉H₂₀(l) + 14O₂(g) → 9CO₂(g) + 10H₂O(l)

Learn more about reaction here:

https://brainly.com/question/28984750

#SPJ1

A 5.00-L tank contains helium gas at 1.50 atm. What is the pressure of the gas when the volume increased to 4.5atm

Answers

Answer:

the pressure of the gas is 1.67 atm when the volume increased to 4.5 L.

Explanation:

Assuming the temperature and the amount of gas remain constant (i.e., the process is isobaric):

Using Boyle's law, we can relate the initial pressure (P1) and volume (V1) to the final pressure (P2) and volume (V2):

P1V1 = P2V2

Plugging in the given values:

P1 = 1.50 atm

V1 = 5.00 L

V2 = 4.5 L

Solving for P2:

P2 = (P1V1)/V2 = (1.50 atm x 5.00 L)/4.5 L = 1.67 atm

When limestone (which is principally CaCO3) is heated, carbon dioxide and quicklime (CaO) are produced by the reaction
CacOs (s) A CaO (s) + CO2(8).
If 16.6 g of CO2 was produced from the thermal decomposition of 40.7 g of CaCOs, what is the percentage yield of the reaction?
Answer in units of %.

Answers

The percentage yield of the reaction is 99.5%.

What is the definition of percentage yield in a chemical reaction?

Percentage yield is the ratio of the actual yield of a reaction to the theoretical yield, expressed as a percentage. It is a measure of the efficiency of a reaction and indicates how much of the desired product was obtained relative to the amount that could have been produced under ideal conditions.

What factors can affect the yield of a chemical reaction?

The yield of a chemical reaction can be affected by a variety of factors, including the purity and amount of the reactants, the conditions under which the reaction occurs (e.g. temperature, pressure, and reaction time), and the efficiency of the reaction process (e.g. whether the product is recovered efficiently).

Other factors that can affect yield include the presence of impurities or side reactions, the stability of the reactants and products, and the skill and experience of the person carrying out the reaction.

To know more about yield,visit:

https://brainly.com/question/30700754

#SPJ1

For the reaction below, how many moles of Nitrogen are required to produce 18 mol of NH3? N₂ + 3H₂ -> 2 NH3.

Answers

Answer:

9mol N

Explanation:

The balanced chemical equation is:

N₂ + 3H₂ → 2NH₃

According to the stoichiometry of this reaction, 1 mole of N₂ reacts with 3 moles of H₂ to produce 2 moles of NH₃.

So, to produce 2 moles of NH₃, we need 1 mole of N₂.

Therefore, to produce 18 moles of NH₃, we would need:

18 mol NH₃ × (1 mol N₂ / 2 mol NH₃) = 9 mol N₂

Thus, 9 moles of nitrogen are required to produce 18 mol of NH₃.

difference between disproportion and comproportion reactions​

Answers

Answer:

Disproportionation reactions involve a molecule being both oxidized and reduced simultaneously, while comproportionation reactions involve two different species reacting to form a single product with an intermediate oxidation state.

For example, the reaction of hydrogen peroxide (H2O2) with potassium permanganate (KMnO4) is a disproportionation reaction, which can be represented as:

2 KMnO4 + 5 H2O2 + 3 H2SO4 → K2SO4 + 2 MnSO4 + 8 H2O + 5 O2

For example, the reaction of sodium thiosulfate (Na2S2O3) with iodine (I2) is a comproportionation reaction, which can be represented as:

2 Na2S2O3 + I2 → Na2S4O6 + 2 NaI

to lower the impacts of climate change we can do the following activities
1
2
3
4
5

science:

Answers

Answer:

To lower the impacts of climate change, we can undertake the following activities:

Invest in low-carbon technologies: Utilize renewable energy sources such as solar panels, tidal energy, wind, wave, and geothermal power to reduce greenhouse gas emissions and minimize our reliance on fossil fuels.

Improve transportation: Opt for fuel-efficient cars, electric vehicles, and better public transport systems to reduce CO2 emissions and pollution.

Adopt sustainable diets: Shift towards plant-based diets, reduce meat and dairy consumption, and support sustainable farming practices to help mitigate climate change.

Restore nature: Plant trees, engage in rewilding schemes, and protect forests and oceans to increase their natural ability to absorb carbon dioxide.

Reduce consumption and waste: Minimize consumption of energy-intensive products, reduce plastic use, and adopt energy-efficient practices in homes, such as insulating walls and roofs and using heat pumps.

CAN SOMEONE HELP WITH THIS QUESTION?✨

Answers

The molarity of the sodium hydroxide solution is 0.0911 M.

we need to calculate the number of moles of potassium hydrogen phthalate:

moles of KHP = mass / molar mass = 0.600 g / 204.22 g/mol = 0.00294 mol

Since one mole of KHP reacts with one mole of NaOH, we know that there are 0.00294 moles of NaOH used in the titration. We can use this information to calculate the molarity of the NaOH solution:

molarity of NaOH = moles of NaOH / volume of NaOH used in liters

We need to convert the volume of NaOH from milliliters to liters:

volume of NaOH = 32.21 mL = 0.03221 L

Now we can calculate the molarity of NaOH:

molarity of NaOH = 0.00294 mol / 0.03221 L = 0.0911 M

The molarity of the sodium hydroxide solution is 0.0911 M.

learn more about Molarity here

https://brainly.com/question/30404105

#SPJ1

Calculate the heat gained by the cold liquid

Answers

To calculate the heat gained by the cold liquid, we need to use the formula: q = m * c * ΔT

where q is the heat gained or lost by the substance, m is the mass of the substance, c is the specific heat capacity of the substance, and ΔT is the change in temperature of the substance.

Let's assume that we have a cold liquid with a mass of 100 grams and an initial temperature of 10°C. We then add 50 grams of a hot solid that has been heated to 80°C. After the solid and liquid are allowed to equilibrate, the final temperature of the mixture is 20°C.

We can first calculate the heat lost by the hot solid using the same formula:

q = m * c * ΔT

q = 50 g * 0.385 J/g°C * (80°C - 20°C)

q = 15400 J

The negative sign indicates that the solid lost heat to the colder liquid.

To calculate the heat gained by the cold liquid, we can use the same formula and the final temperature of the mixture:

q = m * c * ΔT

q = 100 g * 4.184 J/g°C * (20°C - 10°C)

q = 4184 J

Therefore, the heat gained by the cold liquid is 4184 J.

The complete question is :

Use the equation qliquid = m × c × ΔT to calculate the heat gained by the cold liquid. Use the specific heat for the liquid you selected.

Use the equation qwater = m × c × ΔT to calculate the heat lost by the hot water. Show your work using the problem-solving method shown in previous rubrics.

Learn more about specific heat capacity here:

https://brainly.com/question/29766819

#SPJ1

Assume that the short earlobes allele in humans is recessive to the long earlobes allele, and that individuals with the short earlobes genotype exhibit 60% penetrance. What is the probability that two heterozygous individuals will have a child together with the short earlobes phenotype?

Answers

The probability that two heterozygous individuals will have a child together with the short earlobes phenotype is 15%.

Steps

The likelihood of the genotype and phenotype of the progeny can be calculated using a Punnett square. Let's refer to the long earlobe gene as "L" and the short earlobe allele as "l."

The probability of each genotype is:

LL = 1/4

Ll = 1/2

ll = 1/4

Now we need to take into account the 60% penetrance of the short earlobes genotype. This means that even if an individual has the genotype for short earlobes (ll), they may not actually exhibit the phenotype.

So the probability of having the short earlobes phenotype is:

P(short earlobes phenotype) = P(ll) x 0.6

P(ll) = 1/4

Substituting in:

P(short earlobes phenotype) = (1/4) x 0.6

P(short earlobes phenotype) = 0.15 or 15%

The probability that two heterozygous individuals will have a child together with the short earlobes phenotype is 15%.

learn more about earlobes phenotype here

https://brainly.com/question/9383852

#SPJ1

If a student weighs out 0.600 g of potassium hydrogen phthalate (MW 204.22 g/mol) and titrates it with sodium hydroxide solution, what is the molarity of the sodium hydroxide solution if it takes 32.21 mL of it to titrate the potassium hydrogen phthalate?

Hint: one mole of hydrogen phthalate reacts with one mole of sodium hydroxide.

Answers

The molarity of the sodium hydroxide solution is 0.09111 M.

What is Molarity?

Molarity is a measure of the concentration of a solution. It is defined as the number of moles of solute dissolved in one liter of solution.

Molarity is an important concept in chemistry because it allows us to quantify the amount of solute in a solution and to make predictions about the behavior of the solution in various chemical reactions.

First, we can calculate the number of moles of potassium hydrogen phthalate using its molecular weight:

moles of KHP = mass / molecular weight

moles of KHP = 0.600 g / 204.22 g/mol

moles of KHP = 0.002938 mol

Since one mole of KHP reacts with one mole of NaOH, we know that there are also 0.002938 moles of NaOH in the titrated solution. We can calculate the molarity of the NaOH solution using the formula:

molarity = moles of solute / volume of solution (in liters)

First, we need to convert the volume of the NaOH solution from milliliters to liters:

volume of NaOH solution = 32.21 mL = 0.03221 L

Now we can calculate the molarity of the NaOH solution:

molarity = 0.002938 mol / 0.03221 L

molarity = 0.09111 M

Learn more about Molarity from the given link

https://brainly.com/question/14469428

#SPJ1

help asap pls practice

Answers

The balanced equation is:

2[tex]Fe^{3+}[/tex]+ 4[tex]H^{+}[/tex] + 2[tex]No_{2} ^{-}[/tex] → 2[tex]Fe^{2+}[/tex] + 2H2O + 2[tex]No_{3} ^{-}[/tex]

What is balanced equation?

To balance this redox reaction, we first need to identify which elements are being oxidized and reduced. In this case, the iron (Fe) is being reduced from a +3 oxidation state to a +2 oxidation state, while the nitrogen (N) in the nitrite ion (NO2-) is being oxidized from a +3 oxidation state to a +5 oxidation state in the nitrate ion (NO3-).

To balance the equation, we can follow these steps:

Write out the unbalanced equation:

[tex]Fe^{3+}[/tex] + [tex]No_{2} ^{-}[/tex] + H₂O → [tex]Fe^{2+}[/tex] +[tex]H^{+}[/tex] + [tex]No_{3} ^{-}[/tex]

Separate the equation into two half-reactions, one for the oxidation and one for the reduction:

Oxidation: [tex]No_{2} ^{-}[/tex] → [tex]No_{3} ^{-}[/tex]

Reduction: [tex]Fe^{3+}[/tex] → [tex]Fe^{2+}[/tex]

Balance the elements in each half-reaction by adding the appropriate number of electrons (e-):

Oxidation: 4[tex]H^{+}[/tex] + [tex]No_{2} ^{-}[/tex] + e- → [tex]No_{3} ^{-}[/tex] + 2H2O

Reduction: Fe³+ [tex]e^{-}[/tex] → [tex]Fe^{2+}[/tex]

Balance the number of electrons transferred in the two half-reactions by multiplying one or both of the half-reactions by a suitable coefficient:

Oxidation: 4[tex]H^{+}[/tex] + [tex]No_{2} ^{-}[/tex] + 2[tex]e^{-}[/tex] → [tex]No_{3} ^{-}[/tex] + 2H2O

Reduction: 2[tex]Fe^{3+}[/tex] + 2[tex]e^{-}[/tex] → 2[tex]Fe^{2+}[/tex]

Add the two half-reactions together and cancel out any common species on both sides of the equation:

2[tex]Fe^{3+}[/tex]+ 4[tex]H^{+}[/tex] + 2[tex]No_{2} ^{-}[/tex] → 2[tex]Fe^{2+}[/tex] + 2H2O + 2[tex]No_{3} ^{-}[/tex]

The balanced equation is:

2[tex]Fe^{3+}[/tex]+ 4[tex]H^{+}[/tex] + 2[tex]No_{2} ^{-}[/tex] → 2[tex]Fe^{2+}[/tex] + 2H2O + 2[tex]No_{3} ^{-}[/tex]

To know more about oxidation, visit:

https://brainly.com/question/16976470

#SPJ1

Calculate the number of moles of H₂O produced from 1.50 mole CH₂COOH reacting
with sufficient O2

Answers

Answer:

Explanation:

need points :>


A first-order reaction is 45% complete after
400 s. Calculate the rate constant of the
reaction?

Answers

Answer:

the rate constant of the reaction is approximately 0.0021 s^-1.

Explanation:

To calculate the rate constant of a first-order reaction, we can use the following equation:

ln([A]t/[A]0) = -kt

Where [A]t is the concentration of reactant at time t, [A]0 is the initial concentration of reactant, k is the rate constant, and t is time.

Given that the reaction is 45% complete after 400 s, we can assume that [A]t/[A]0 = 0.55 (since 100% - 45% = 55%). Plugging this value into the equation above, we get:

ln(0.55) = -k(400)

Solving for k, we get:

k = -ln(0.55)/400

k ≈ 0.0021 s^-1

A first-order reaction is 45% complete after 400 s. Therefore, 0.0021 s⁻¹ is the rate constant of the reaction.

What is rate constant?

The chemical kinetics rate law, which connects the molecular concentration of reacting substances to reaction rate, uses the rate constant as a proportionality factor. The letter k in an equation designates it, which is also referred to as either the resultant rate constant and reaction rate coefficient.

The link among the molecular concentration of reactants with the rate for a chemical reaction is shown by the proportionality constant k. Utilising the molecular weights of each of the reactants with the sequence of the reaction, the rate constant can be calculated experimentally. As an alternative, the Arrhenius equation can be used to compute it.

ln([A]t/[A]0) = -kt

[A]t/[A]0 = 0.55

ln(0.55) = -k(400)

k = -ln(0.55)/400

k ≈ 0.0021 s⁻¹

Therefore, 0.0021 s⁻¹ is the rate constant.

To know more about rate constant, here:

https://brainly.com/question/20305871

#SPJ2

someone pls help T-T

100 points

Answers

Layer 1 because it is closest to the surface

FILL IN THE BLANK
In both fusion and fission, stability _______ as a result of the reaction.
Select one:
a) Increases
b) Decreases
c) Remains the same

Need help on this ASAP thank you!!

Answers

In both fusion and fission, stability decreases as a result of the reaction. In fusion, two smaller nuclei combine to form a larger nucleus, releasing energy in the process.

The resulting nucleus may be unstable and undergo radioactive decay, which can further release energy. In fission, a larger nucleus is split into smaller nuclei, also releasing energy. The resulting nuclei may also be unstable and undergo radioactive decay. In both cases, the process of splitting or combining nuclei releases energy, but it also reduces the overall stability of the resulting nuclei.

To know more about radioactive decay please refer:

https://brainly.com/question/1770619

#SPJ1

What is the percent composition of Iron in a pure sample of Iron (III) oxide(Fe₂03)?

Answers

The percentage of iron in ferric oxide is 70%.

Molecular formula of ferric oxide is [tex]Fe_{2} O_{3}[/tex].

First, we will calculate the total mass of ferric oxide.

Molecular weight of oxygen = 16

Molecular weight of iron = 56

Therefore, total mass of oxygen=3 × 16 =48 g

and total mass of iron=2 × 56 =112 g

Percentage of metal in the chemical = total mass of the metal/ total mass of the compound× 100

Now, total mass of ferric oxide = 48+ 112 =160 g

Percentage of iron in the chemical = total mass of the iron/ total mass of ferric oxide × 100= 112160 × 100=70 %

Therefore, the percentage of iron in ferric oxide is 70%.

To learn more about molecular weight,

brainly.com/question/27988184

brainly.com/question/18948587

You have 1,500g of ethane to react with 10,000g of oxygen. which will run out first?

Answers

Answer:

Ethane(C2H6) reacts with oxygen gas to produce carbon dioxide and water.

7. How many molecules of food dye were actually in the last solution? To calculate this we need to make some assumptions:
a. 10 drops of the 100% solution has a mass of 1 gram.
b. 1 gram of food dye has approximately 1.2*1022 molecules in it. (this is
based on its molecular weight and a little finagling with Avogadro's
number)
I
c. Now, depending on how many dilutions you made, you can figure out
how many molecules of food dye are actually sitting on the
bottom of your crucible. HINT: your first dilution has 1/10 the
number of molecules as the original Dye.
SHOW YOUR CALCULATIONS HERE:

Answers

There are approximately [tex]1.2*10^17[/tex] molecules of food dye in the last solution.

Assuming that one drop of 100% solution is approximately 0.1 mL, then 10 drops of the 100% solution would be equivalent to 1 mL. If this 1 mL of the 100% solution was diluted to a final volume of 50 mL, then the dilution factor is 50.

Using the given approximation of 1 gram of food dye having approximately [tex]1.2*10^22[/tex] molecules, we can calculate the number of molecules in the original 1 mL of the 100% solution to be:

1 g * ([tex]1.210^22[/tex]molecules/g) = [tex]1.210^22[/tex]molecules

For the first dilution, the number of molecules would be 1/10th of this value, or:

(1/10) * [tex]1.210^221.210^22[/tex] = [tex]1.210^21[/tex]molecule

For the second dilution, the number of molecules would be 1/10th of this value, or:

[tex](1/10) * 1.210^21 = 1.210^20[/tex] molecules

If this process was repeated for a total of 5 dilutions, the number of molecules in the final solution would be:

[tex](1/10)^5 * 1.210^22 = 1.210^17[/tex]molecules

Therefore, there are approximately [tex]1.2*10^17[/tex] molecules of food dye in the last solution.

Learn more about molecules here

https://brainly.com/question/19922822

#SPJ1

For the substances we will test in this experiment, use your knowledge of these substances to make a prediction about which ones you think will be strong electrolytes, weak electrolytes, or non-electrolytes. Be sure to indicate a rationale for your choices.

1. distilled water
2. sodium chloride solution
3. glycerol solution
4. acetic acid solution
5. calcium chloride solution
6. sucrose solution
7. hydrochloric acid solution
8. ethanol solution
9. simulated urine solution

Answers

Here are my predictions for each of the substances based on their properties:

Distilled water - Non-electrolyte. Distilled water is a pure substance and does not contain any ionic compounds or free ions.
Sodium chloride solution - Strong electrolyte. Sodium chloride is an ionic compound that dissociates completely into its constituent ions when dissolved in water.
Glycerol solution - Non-electrolyte. Glycerol is a molecular compound and does not dissociate into ions when dissolved in water.
Acetic acid solution - Weak electrolyte. Acetic acid is a weak acid that dissociates only partially into its constituent ions when dissolved in water.
Calcium chloride solution - Strong electrolyte. Calcium chloride is an ionic compound that dissociates completely into its constituent ions when dissolved in water.
Sucrose solution - Non-electrolyte. Sucrose is a molecular compound and does not dissociate into ions when dissolved in water.
Hydrochloric acid solution - Strong electrolyte. Hydrochloric acid is a strong acid that dissociates completely into its constituent ions when dissolved in water.
Ethanol solution - Non-electrolyte. Ethanol is a molecular compound and does not dissociate into ions when dissolved in water.
Simulated urine solution - This will depend on the specific composition of the simulated urine solution. However, urine typically contains a variety of dissolved ions and compounds, including electrolytes like sodium and potassium ions. Therefore, I would predict that simulated urine solution is likely to be a strong electrolyte.

please help with this question :)

Answers

For a 1-gram piece of magnesium, the amount of MgO produced by Mg is less than the amount produced by O2. Therefore, Mg is the limiting reactant and O2 is in excess.

For a 1000-gram piece of magnesium, the amount of MgO produced by Mg is still less than the amount produced by O2, even though there is a lot more Mg present. Therefore, Mg is still the limiting reactant and O2 is in excess.

To determine which reactant is limiting and which is in excess, we need to calculate the amount of product that each reactant can produce and compare them.

For a 1-gram piece of magnesium:

Moles of Mg = mass/Molar mass = 1 g/24.31 g/mol = 0.041 moles

Moles of O2 = volume x pressure/RT = (22.4 L at STP x 1 atm)/(0.0821 L·atm/mol·K x 273 K) = 1.0 moles

According to the balanced equation, 2 moles of Mg reacts with 1 mole of O2 to produce 2 moles of MgO

Therefore, the amount of MgO produced by 0.041 moles of Mg would be (2/2) x 0.041 moles = 0.041 moles

The amount of MgO produced by 1 mole of O2 would be (2/1) x 0.041 moles = 0.082 moles

We can see that the amount of MgO produced by Mg is less than the amount produced by O2. Therefore, Mg is the limiting reactant and O2 is in excess.

For a 1000-gram piece of magnesium:

Moles of Mg = mass/Molar mass = 1000 g/24.31 g/mol = 41.1 moles

Moles of O2 = volume x pressure/RT = (22.4 L at STP x 1 atm)/(0.0821 L·atm/mol·K x 273 K) = 1.0 moles

According to the balanced equation, 2 moles of Mg reacts with 1 mole of O2 to produce 2 moles of MgO

Therefore, the amount of MgO produced by 41.1 moles of Mg would be (2/2) x 41.1 moles = 41.1 moles

The amount of MgO produced by 1 mole of O2 would be (2/1) x 41.1 moles = 82.2 moles

We can see that the amount of MgO produced by Mg is still less than the amount produced by O2, even though there is a lot more Mg present. Therefore, Mg is still the limiting reactant and O2 is in excess.

learn more about limiting reactant here

https://brainly.com/question/26905271

#SPJ1

What are 4 body systems that are used when taking a test and how do each help?

Answers

Answer:

Great question! Here are four body systems that are used when taking a test and how each helps: 1. Nervous system: The nervous system is responsible for processing information and responding to stimuli. It plays a crucial role in test-taking by allowing students to process and understand the questions being asked, recall the relevant information, and formulate responses. 2. Cardiovascular system: The cardiovascular system circulates blood throughout the body, providing oxygen and nutrients to the brain and other organs. During a test, the cardiovascular system helps to maintain focus and mental clarity by providing the brain with the energy it needs to function optimally. 3. Respiratory system: The respiratory system is responsible for taking in oxygen and expelling carbon dioxide. Proper breathing is essential during test-taking because it helps to reduce stress and anxiety, and provides oxygen to the brain, which is necessary for clear thinking. 4. Muscular system

Four key body systems that are used when taking a test are Nervous System, Circulatory System, Respiratory System, Musculoskeletal System

Nervous System: The nervous system is crucial for cognitive processes, including memory, attention, and problem-solving.

Circulatory System: The circulatory system, consisting of the heart, blood vessels, and blood, plays a vital role in delivering oxygen and nutrients to the brain.

Respiratory System: The respiratory system is responsible for supplying oxygen to the body and eliminating carbon dioxide.

Musculoskeletal System: The musculoskeletal system, consisting of bones, muscles, and joints, supports posture and physical stability during the test.

Hence, four body systems are explained above.

Learn more about body systems here:

https://brainly.com/question/13258877

#SPJ 2

What was the initial molarity of a sodium hydroxide solution if 45.0 mL of the solution was diluted such that the volume of the diluted sample is now 180 mL and the new concentration is 0.100 M NaOH?

___M (Answer Format X.X)

Answers

Answer:

the sodium hydroxide solution was 0.4 M.

Explanation:

To solve this problem, we can use the dilution formula:

M1V1 = M2V2

where M1 is the initial concentration, V1 is the initial volume, M2 is the final concentration, and V2 is the final volume.

We are given that 45.0 mL of a sodium hydroxide solution was diluted and the resulting volume is 180 mL with a concentration of 0.100 M. Let's use M1 for the initial concentration, V1 for the initial volume, M2 for the final concentration, and V2 for the final volume.

M2 = 0.100 M

V1 = 45.0 mL

V2 = 180 mL

We can rearrange the dilution formula to solve for M1:

M1 = (M2V2) / V1

Substituting the given values, we get:

M1 = (0.100 M x 180 mL) / 45.0 mL

M1 = 0.400 M

Therefore, the initial molarity of the sodium hydroxide solution was 0.4 M.

1.
Which of the following quotes best explains the role of the USDA in developing biotechnology?
“USDA supports the safe and appropriate use of science and technology, including biotechnology, to help meet agricultural challenges and consumer needs of the 21st century.”
“Since the first successful commercialization of a biotechnology-derived crop in the 1990s, many new crop varieties have been developed and made available to U.S. farmers and farmers worldwide.”
“The United States is the largest exporter of agricultural products, which helps feed the world's population.”
“Agricultural biotechnology is a range of tools, including traditional breeding techniques, that alter living organisms, or parts of organisms, to make or modify products.”




2.
Increased biotechnology has:
decreased the use of synthetic pesticides.
increased the chemical content of fruits and vegetables.
created new, devastating plant diseases.
made farming less profitable.

Answers

Based on public policy, the most recent scientific findings, and efficient management, we give leadership on matters relating to food, agriculture, energy wealth, rural development, nutrition, & related topics.

What is an illustration of biotechnology?

A few examples of how biotechnology is influencing medicine are synthetic growth hormone and insulin as well as diagnostic procedures to find various ailments. The improvement of industrial procedures, environmental remediation, and agricultural production have all benefited from the use of biotechnology.

Is working in biotechnology a wise career move?

The demand for biotechnology is growing in industries including pharmaceutical, animal husbandry, agricultural, healthcare, medicine, genetic engineering, etc. In addition, biotechnologists are well compensated for their work. Thus, it is undoubtedly a smart professional choice.

To know more about Biotechnology visit:

https://brainly.com/question/28609422

#SPJ1

Suppose hydroxide ion, OH–, is the only anion contributing to the alkalinity of the sample. How will the “P” and “T” alkalinity values compare?

Answers

In comparison to the "P" alkalinity, the "T" alkalinity will be higher.

The "P" alkalinity of a sample is determined by the amount of hydrogen ions ([tex]H^+[/tex]) that are neutralized by the anions present. The "T" alkalinity of a sample is determined by the amount of hydroxide ions ([tex]OH^-[/tex]) that are neutralized by the cations present. In a sample where the only anion contributing to alkalinity is hydroxide ion, [tex]OH^-[/tex], the "P" alkalinity will be zero since there are no hydrogen ions ([tex]H^+[/tex]) to be neutralized. However, the "T" alkalinity will be equal to the amount of hydroxide ions ([tex]OH^-[/tex]) present since all of the [tex]OH^-[/tex] ions will be neutralized by the cations present. Therefore, in this case, the "T" alkalinity will be greater than the "P" alkalinity.

learn more about hydroxide ions Refer:brainly.com/question/14619642

#SPJ1

50.0 mLs of HCl of unknown concentration is titrated to neutrality with 90.0 mL of 0.650 M NaOH. Calculate the molarity of the HCl.

Answers

Answer:

the molarity of the HCl is 1.17 M.

Explanation:

The balanced chemical equation for the reaction between HCl and NaOH is:

HCl + NaOH -> NaCl + H2O

From the equation, we can see that one mole of HCl reacts with one mole of NaOH to produce one mole of NaCl and one mole of water.

First, let's calculate the number of moles of NaOH used:

moles of NaOH = Molarity x Volume in liters

moles of NaOH = 0.650 M x 0.0900 L

moles of NaOH = 0.0585 mol

Since the reaction between HCl and NaOH is a 1:1 stoichiometry, the number of moles of HCl is also equal to 0.0585 mol.

Now, we can use the number of moles of HCl and the volume of HCl to calculate the molarity:

Molarity of HCl = moles of HCl / Volume in liters

Molarity of HCl = 0.0585 mol / 0.0500 L

Molarity of HCl = 1.17 M

Therefore, the molarity of the HCl is 1.17 M.

CAN SOMEONE HELP WITH THIS QUESTION?✨

Answers

Fe²⁺ is the reducing agent since in the given redox reaction it loses electrons which are transferred to another species.

What is a reducing agent?

A reducing agent, also known as a reductant, is a substance that causes a reduction in another substance by donating electrons or by removing oxygen from the substance being reduced. In other words, it is a substance that facilitates a chemical reaction by undergoing oxidation itself.

A reducing agent is typically an electron donor and is oxidized during the reaction. Examples of reducing agents include metals like zinc, hydrogen gas, and organic compounds like alcohols and sugars.

Learn more about reducing agents here:

https://brainly.com/question/2890416

#SPJ1

17. Describe the results of an experiment where Detroit and Flint water are placed in beakers,
stirring, in the presence of a metal coil.
#17

Answers

Without more information about the specific experiment, it is difficult to provide a definitive answer to this question. However, based on the limited information provided, it seems that the experiment involves placing water samples from Detroit and Flint into separate beakers, stirring them, and then introducing a metal coil into each beaker.

What is Metal?

Metal is a type of element characterized by its shiny appearance, malleability, ductility, and ability to conduct heat and electricity. Metals are typically solid at room temperature (except for mercury, which is a liquid) and have a high melting and boiling point.

If the metal coil is made of a reactive metal such as iron, zinc, or aluminum, and the water contains dissolved oxygen and other ions, then the metal coil may undergo a chemical reaction with the water. This could result in the formation of metal ions and the release of hydrogen gas. The metal ions and other reaction products could then combine with other compounds in the water to form insoluble precipitates, which could appear as a cloudy or turbid solution.

Learn more about Metal from the given link

https://brainly.com/question/4701542

#SPJ1

Calculate the buffer capacity for OH- of the buffer composed of 1.0 L of 1.0 M CH3COOH / 0.575 M NaCH3COO. (Change in pH = 4.52)

Answers

The buffer capacity for OH- is equal to the concentration of OH- added, which is [tex]1.87 × 10^-9[/tex] M.

The buffer capacity for OH- is given by the Henderson-Hasselbalch equation:

pH = pKa + log([A-]/[HA])

where pH is the desired pH change, pKa is the dissociation constant of the acid, [A-] is the concentration of the conjugate base, and [HA] is the concentration of the acid.

Rearranging the equation, we get:

[A-]/[HA] = [tex]10^(pH - pKa)[/tex]

In this case, CH3COOH is the acid, and NaCH3COO is its conjugate base. The dissociation constant of acetic acid (CH₃COOH) is 4.76. We can calculate the concentrations of CH₃COOH and NaCH₃COO as follows:

[CH₃COOH] = 1.0 M

[NaCH₃COO] = 0.575 M

To calculate the buffer capacity for OH-, we first need to find the pH of the buffer before adding OH-. We can use the Henderson-Hasselbalch equation to do this:

pH = pKa + log([A-]/[HA])

pH = 4.76 + log(0.575/1.0)

pH = 4.19

Now, if we add OH- to the buffer, it will react with CH₃COOH to form CH₃COO-, according to the following balanced equation:

CH₃COOH + OH- → CH₃COO- + H₂O

The concentration of OH- added to the buffer can be calculated using the pH change:

pH = 4.19 + 4.52 = 8.71

[OH-] = 10^-(pH) = 1.87 × [tex]10^-9[/tex]M

The change in concentration of CH3COOH and CH3COO- due to the addition of OH- can be calculated using stoichiometry:

Δ[CH₃COOH] = -[OH-]

Δ[CH₃COO-] = [OH-]

Therefore, the new concentrations of CH₃COOH and CH₃COO- after adding OH- are:

[CH₃COOH] = 1.0 - [OH-] = 1.0 - 1.87 ×[tex]10^-9[/tex] = 1.0 M

[CH₃COO-] = [NaCH₃COO] + [OH-] = 0.575 + 1.87 × [tex]10^-9[/tex] = 0.575 M

Using the Henderson-Hasselbalch equation, we can calculate the new pH of the buffer:

pH = pKa + log([A-]/[HA])

pH = 4.76 + log(0.575/1.0)

pH = 4.19

Learn more about concentration here:

https://brainly.com/question/10725862

#SPJ1

Need help with problem

Answers

The number of moles of CO contained in the 20.0 L tank at 93 °C and 4.52 atm is 3.01 moles (3rd option)

How do i determine the number of mole contained in the tank?

First, we shall list out the given parameters from the question. Details below:

Volume of tank (V) = 20.0 L Temperature (T) = = 93 °C = 93 + 273 = 366 KPressure (P) = 4.52 atmGas constant (R) = 0.0821 atm.L/molKNumber of mole (n) =?

We can obtain the number of mole in the tank as follow:

PV = nRT

4.52 × 20 = n × 0.0821 × 366

90.4 = n × 30.0486

Divide both sides by 30.0486

n = 90.4 / 30.0486

n = 3.01 moles

Thus, we can conclude that the number of mole of the gas is 3.01 moles (3rd option)

Learn more about number of mole:

https://brainly.com/question/29927685

#SPJ1

2. a) what is the empirical formula of an ingredient in bufferin table that has the percent composition C1:4.25%, 0:56 93% and Mg: 28.83 % by mass
b) An analysis of sample of an organic compound shows that it contains 39.9 % C, 6.9% H, and 53,2% 1. calculate the empirical formula of the compound
2. the relative molecular mass is 60 what is the molecular formula of the compound?​

Answers

Explanation:

a)Take percentages and divide by mole wt ( from periodic table) of the corresponding element

          C     14.25 / 12            = 1.1875

          O     56.93 / 15.99     = 3.56

          Mg   28.83/24.3        = 1.186        Divide by the smallest number

                        C 1.1875/1.186      = 1

                         O 3.56 / 1.186     = 3

                         Mg  1.186 / 1.186 =  1

C O3  Mg         commonly written as Mg CO3   ( magnesium carbonate)

Other Questions
The shark population has decreased. Explain what effect this might have on the populations of starfish and limpets. In the circle below, suppose m VUX = 228 and mZUVW=121. Find the following.UX(a) m/VUX = (b) m LUXW =0. An outline of a city map is shown. The population of the city is 23,023 people. What is the population density of the city? supportive leadership is an important dimension of leader behavior for the path-goal model of leadership. question 10 options: true false which of the following may be an advantage of making a part rather than buying it?multiple select question.a smoother flow of parts and materials for productionless dependence on outside suppliersmore dependence on suppliershigher quality and lower cost because the supplier company enjoys economies of scale #One of the advances in genetic research is the development of genetically modifiedorganisms (GMO's). This creates plants that are resistant to diseases and insects, droughttolerant, and can be mass produced more efficiently by altering the DNA sequence to makethem better suited to the environment. Many farmers in our area use GMO's for their cropswithout even knowing they are using GMOs. This also creates animals which are larger,stronger, and more resistant to disease. Considering the world population is nearing 7 billionpeople and hunger is a major concern with the development of lands once used foragriculture, food will become more difficult to provide. Should science continue to modifyplants and animals, even though that is not how they were originally created? Do you thinkyou are eating GMO's? Should companies be required to label food that is a GMO? Take aposition and defend your answer. 6. this is an example of appropriately fulfilling the duty to provide proper instruction: assistant coaches teach skills without supervision by the head coach. a. true b. false which is not an advantage of working in a team? select one: a. group decision may be of a higher quality than that made by an individual b. teams are frequently overused c. group members are more likely to be committed to the project and/or results d. it may reduce the chance of communication problems Why is Kobe and Jordan's poem similar in format? a domestic limited liability company not classified as a corporation under irs regulations is owned entirely by one individual taxpayer. unless the taxpayer elects otherwise, the company will be taxed as in classical variables sampling, the evidence supports the conclusion that the account is not materially misstated if both the upper and lower limits are within the bounds of "All persons born or naturalized in the United States, and subject to the jurisdiction thereof,are citizens of the United States and of the State wherein they reside. No State shall makeor enforce any law which shall abridge the privileges or immunities of citizens of theUnited States; nor shall any State deprive any person of life, liberty, or property, without dueprocess of law; nor deny to any person within its jurisdiction the equal protection of thelaws." - 14th AmendmentIn your opinion, which 2 words capture the most importantinformation? How can Jessica better introduce her claim? the nurse assesses a patient with chronic obstructive pulmonary disease (copd) who has been admitted with increasing dyspnea over the past 3 days. which finding is most important for the nurse to report to the health care provider? Establish the relationship between computer and mass media while justifying the importance of computer to mass communication UESTION 37Effective studying is effortless.TrueO FalseQUESTION 38is an effective study strategy where you don't cram but study over a period of days, preferably with breaks in betweenO a. Practice testingOb. InterleavingO c. SpacingO d. CrammingQUESTION 39Click Save and Submit to save and submit. Click Save All Answers to save all answers. Suki purchased $9,600 worth of stock and paid her broker a 2.5% brokerfee. She had an immediate need for cash and was forced to sell the stockwhen it was worth $8,000. She used a discount broker who charged$33.97 per trade transaction.Compute Suki's net loss(-) after the broker fees were taken out. throughout the world groups and societies vary in terms of social organization. however, a division of labor based on A large 2.00104 L aquarium is supported by four wood posts (Douglas fir) at the corners. Each post has a square 5.60 cm x 5.60 cm cross section and is 80.0 cm tall.By how much is each post compressed by the weight of the aquarium? a registered nurse teaches a new nurse about when a client with high blood pressure would follow up with the primary health care provider . which statement made by the new nurse indicates effective learning ?