The total pressure in a 2 L flask that contains 5.33 g of Ne and 13.40 g of Ar at 38°C is 5.20 atm.
To calculate the total pressure, you must use the ideal gas law equation: PV = nRT, where P is pressure, V is volume, n is the amount of gas (in moles), R is the gas constant, and T is temperature in Kelvin.
You must first convert the temperature from Celsius to Kelvin (38°C = 311.15 K). Next, you must convert the mass of each gas into moles (5.33 g Ne = 0.01502 mol, 13.40 g Ar = 0.2225 mol).
Finally, you can calculate the total pressure (P = (0.01502 mol Ne + 0.2225 mol Ar) * 0.08206 L atm K⁻¹ mol⁻¹ * 311.15 K/ (2 L) = 5.20 atm).
To know more about ideal gas law click on below link:
https://brainly.com/question/28257995#
#SPJ11
onsider a process in which an ideal gas is compressed to one-fourth of its original volume at a constant temperature. calculate the entropy change per mole of gas.
The entropy change per mole of gas is -1.387R.
The entropy change per mole of gas in a process in which an ideal gas is compressed to one-fourth of its original volume at a constant temperature can be calculated as follows:
Let us denote the original volume as V₁, the final volume as V₂, and the number of moles of the gas as n. The entropy change can be calculated using the formula:
ΔS = nR ln (V₂/V₁)
Therefore, the entropy change per mole of gas is given by:
ΔSper mole = R ln (V₂/V₁)
In this case, V₁ = 4V₂ and so,
ΔSper mole = R ln (1/4) = - R ln 4 = -2.303 R log 4 = -1.387R
Thus, the entropy change per mole of gas when an ideal gas is compressed to one-fourth of its original volume at a constant temperature is -1.387R.
To know more about entropy change, refer here:
https://brainly.com/question/4526346#
#SPJ11
An ester is mixed with LiNHCH3 in order to perform a SNAc mechanism. What is the LUMO in this reaction?
A. N p orbital
B. C-N σ bond
C. C-O σ* bond
D. C-O π* bond
The LUMO for the reaction when an ester is mixed with [tex]LiNHCH_{3}[/tex] is D. C-O π* bond.
What will be the LUMO in an SNAc mechanism?In the SNAc (nucleophilic acyl substitution) mechanism, the nucleophile (LiNHCH_{3}) attacks the carbonyl carbon of the ester, and the LUMO in this reaction is the lowest unoccupied molecular orbital, which is the C-O π* bond.
To know more about SNAc Mechanism :
https://brainly.com/question/28383861
#SPJ11
sep interpret data explain what is happening to the intermolecular forces as a substance moves across line x from the left to the right. how does this compare to the molecular behavior as a substance changes across line z from the right to the left?
As a substance moves across line X from left to right on the Methanol phase diagram, it undergoes a change in state from solid to liquid.
What is the intermolecular forces about?The above change in state is due to an increase in temperature and pressure, which causes the intermolecular forces between the Methanol molecules to weaken, allowing them to move more freely and transition from a solid state to a liquid state. Therefore, the intermolecular forces between the molecules are decreasing as the substance moves across line X.
On the other hand, as a substance changes across line Z from the right to the left, it undergoes a change in state from gas to liquid. This change in state is due to a decrease in temperature and pressure, which causes the intermolecular forces between the Methanol molecules to strengthen, resulting in the gas molecules losing energy and transitioning to a liquid state. Therefore, the intermolecular forces between the molecules are increasing as the substance moves across line Z.
In summary, as a substance moves across line X from left to right, the intermolecular forces between the molecules are decreasing, while as a substance moves across line Z from right to left, the intermolecular forces between the molecules are increasing.
Read more about intermolecular forces here:
https://brainly.com/question/2193457
#SPJ1
See full question below
ANALYZING DATA
Analyze Phase Diagrams
A phase diagram shows, at any given temperature and pressure, the state of a certain substance, and the conditions where different states can be in equilibrium. The triple point, shown at where the three lines X, Y, and Z meet, is the temperature and pressure where solid, liquid, and gas can coexist. The critical point shows the minimum temperature and pressure where a substance can exist as both a liquid and gas. It is the point where it becomes a supercritical fluid. Supercritical fluids are used for industrial processes, including an alternative way to dye fabrics.
Methanol Phase Diagram
Pressure (atm)
80
Laqurd
Solid X
Y
1
Z
Gas
65
240
-97.65
-97.45
Temperature (°C)
sep interpret data explain what is happening to the intermolecular forces as a substance moves across line x from the left to the right. how does this compare to the molecular behavior as a substance changes across line z from the right to the left?
a crystal is a single, continuous piece of a mineral bounded by flat surfaces that formed naturally as the mineral grew and it needs to be see-through. group of answer choices true false
The given statement "a crystal is a single, continuous piece of a mineral bounded by flat surfaces that formed naturally as the mineral grew and it needs to be see-through" is True because a crystal is a mineral that is bounded by flat surfaces that is formed naturally as the mineral keeps growing.
Crystals are typically transparent or translucent and have a distinctive geometric shape. The size of a crystal can range from microscopic to a few centimeters.
The process of crystal growth can occur in one of two ways.
The first is through nucleation, which is when a particle, called a nucleus, begins to grow around the surface of the mineral. As it continues to grow, the nucleus will attract surrounding atoms and molecules, which then attach to the surface of the nucleus and form the crystal structure.
The second method is called epitaxy, and it occurs when a crystal already present in the environment will attract and attach surrounding atoms and molecules, thereby forming a new crystal structure.
Crystals can form in a wide range of shapes, sizes, and colors depending on the environment and the mineral from which they are formed. Additionally, different crystal shapes can often form from the same mineral depending on the environmental conditions.
In conclusion, it can be said that yes, a crystal is a single, continuous piece of a mineral that is bounded by flat surfaces that formed naturally as the mineral grew and it needs to be see-through.
To know more about Crystals, refer here:
https://brainly.com/question/13008800#
#SPJ11
tell me all about hydrothermal deposits: what are they, when do they typically form in the solidification process, what are the two basic types, where do they typically form, and why are they of special importance?
Answer:
What are they? When do they typically form in the solidification process?
Hydrothermal deposits are hot springs of mineral-rich water that form during the late stages of solidification.
Where do they typically form?
They typically form in volcanoes, mid-ocean ridges, and hot springs.
Why are they of special importance?
They are important sources of ore minerals and precious metals, and provide evidence of past volcanic and tectonic activity. They also give us insight into the chemical and physical processes deep within the Earth.
Hydrothermal deposits are hot springs of mineral-rich water that form when hot magma or lava interacts with groundwater or surface water. They typically form during the late stages of the solidification process, when magma has cooled and begun to crystallize.
There are two basic types of hydrothermal deposits: veins and hot spring deposits. Veins form when mineral-rich fluids are forced into cracks in pre-existing rock layers, while hot spring deposits form when the hot mineral-rich water is discharged from the surface. Hydrothermal deposits can form in a variety of locations, including volcanoes, mid-ocean ridges, and hot springs.
Hydrothermal deposits are of special importance for two main reasons. First, they are often a major source of ore minerals and precious metals, such as gold and silver. Second, they provide important evidence of past volcanic and tectonic activity, which can help us understand the geologic history of an area. Additionally, hydrothermal deposits can provide valuable insight into the chemical and physical processes that occur deep within the Earth.
In summary, hydrothermal deposits are hot springs of mineral-rich water that form during the late stages of solidification. They typically form in volcanoes, mid-ocean ridges, and hot springs. They are important sources of ore minerals and precious metals, and provide evidence of past volcanic and tectonic activity. They also give us insight into the chemical and physical processes deep within the Earth.
Learn more about Hydrothermal deposits here:
https://brainly.com/question/30710400#
#SPJ11
if the equillibrium is established by beginning with equal number of moles of So2 and O2 what must be true at equillibrium
Explanation:
the reaction being referred to is the one where sulfur dioxide (SO2) and oxygen (O2) react to form sulfur trioxide (SO3) according to the following balanced equation:
2 SO2(g) + O2(g) ⇌ 2 SO3(g)
If the equilibrium is established by beginning with equal numbers of moles of SO2 and O2, i.e., if the initial molar amounts of SO2 and O2 are the same, then we can conclude the following at equilibrium:
The rate of the forward reaction (2 SO2(g) + O2(g) → 2 SO3(g)) is equal to the rate of the reverse reaction (2 SO3(g) → 2 SO2(g) + O2(g)).
The concentrations of SO2, O2, and SO3 will remain constant over time.
The amounts of SO2, O2, and SO3 present at equilibrium will depend on the temperature, pressure, and other conditions of the system.
The value of the equilibrium constant (Kc) for the reaction will have a specific numerical value at equilibrium, which will depend on the temperature and other conditions of the system.
The value of the reaction quotient (Qc) for the reaction will be equal to the equilibrium constant (Kc) at equilibrium, indicating that the system is at equilibrium
leave a comment
the electrolyte in automobile lead storage batteries is a 3.75 m sulfuric acid solution that has a density of 1.230 g/ml. calculate the mass percent, molality, and normality of the sulfuric acid.
In summary, the mass percent of the sulfuric acid solution is 29.89%, the molality is 4.35 mol/kg, and the normality is 7.5 N.
To calculate the mass percent, molality, and normality of the 3.75 M sulfuric acid solution, follow these steps:
First let's calculate the mass of 1 liter of the solution:
We know, Density = mass/volume. So, mass = density × volume = 1.230 g/mL × 1000 mL = 1230 g
Now, calculating the mass of sulfuric acid (H2SO4) in 1 liter of the solution:
Molarity = moles of solute/volume of solution. So moles of solute = molarity × volume = 3.75 mol/L × 1 L = 3.75 mol
The molar mass of H2SO4 = (2 × 1.01) + (32.07) + (4 × 16) = 98.08 g/mol
Mass of H2SO4 = moles × molar mass = 3.75 mol × 98.08 g/mol = 367.8 g
To Calculate the mass percent of H2SO4:
Mass percent = (mass of solute / mass of solution) × 100
= (367.8 g / 1230 g) × 100 = 29.89%
To Calculate the molality of H2SO4:
Molality = moles of solute / mass of solvent (in kg)
Mass of solvent = mass of solution - mass of solute = 1230 g - 367.8 g = 862.2 g = 0.8622 kg
Molality = 3.75 mol / 0.8622 kg = 4.35 mol/kg
To Calculate the normality of H2SO4:
Normality = molarity × number of equivalents per mole
For H2SO4, there are 2 acidic hydrogens (protons) that can be released, so the number of equivalents per mole = 2.
Normality = 3.75 M × 2 = 7.5 N
In summary, the mass percent of the sulfuric acid solution is 29.89%, the molality is 4.35 mol/kg, and the normality is 7.5 N.
Learn more about mass percent, molarity and normality here, https://brainly.com/question/20349446
#SPJ11
Which of the following contains less solute at a given temperature and pressure ?
unsaturated solution or saturated solution .
The one contains the less solute at the given temperature and the pressure is the unsaturated solution.
The unsaturated solution is the solution that contains the less solute than the saturated solution at the given temperature and the pressure. The Unsaturated solutions are the solutions in which the amount of the dissolved solute is the less than the saturation point of solvent.
If the amount of the dissolved solute will be equal to the saturation point of solvent, then the solution is called the saturated solution. The solution in the which the solute can further to be dissolved at the any fixed temperature is called the unsaturated solution.
To learn more about solution here
https://brainly.com/question/14591590
#SPJ4
li has two natural isotopes: li-6 (6.015 amu) and li-7 (7.016 amu). calculate the atomic mass of element li given the abundance of li-7 is 92.5%. group of answer choices 6.09 amu 6.50 amu 6.52 amu 6.94 amu 12.5 amu
The atomic mass of Li is 6.94 amu.
Li has two natural isotopes: Li-6 (6.015 amu) and Li-7 (7.016 amu). The atomic mass of element Li can be calculated given the abundance of Li-7 is 92.5%. The correct answer is 6.94 amu.Atomic mass is defined as the mass of an atom of an element. It is the sum of the masses of the protons and neutrons present in the atomic nucleus. The atomic mass is usually given in atomic mass units (amu) and is measured using mass spectrometry. Atomic mass is also known as atomic weight.The atomic mass of Li can be calculated as follows:atomic mass of Li = (abundance of Li-6 × atomic mass of Li-6) + (abundance of Li-7 × atomic mass of Li-7)Given,Abundance of Li-6 = 100% - 92.5% = 7.5%Abundance of Li-7 = 92.5%Atomic mass of Li-6 = 6.015 amuAtomic mass of Li-7 = 7.016 amuSubstitute the values in the formula to obtain the atomic mass of Li.atomic mass of Li = (0.075 × 6.015) + (0.925 × 7.016)= 0.45113 + 6.4914= 6.94253≈ 6.94 amu Therefore, the atomic mass of Li is 6.94 amu. An atom is composed of electrons, protons, and neutrons. An atom with a specific number of protons in its nucleus is referred to as an element. A variety of isotopes with different masses can be produced by different atoms of the same element. Naturally occurring isotopes are referred to as natural isotopes.
Learn more about Atomic mass
brainly.com/question/5661976
#SPJ11
What would you predict, the solubility of KHT (solid) in pure water compared with the solubility of KHT (solid) in a 0.1 M KCl solution, which one will be higher? Explain your answer.
The solubility of KHT (solid) in pure water compared with the solubility of KHT (solid) in a 0.1 M KCl solution is predicted to be higher in the 0.1 M KCl solution. This is because the KCl solution has a higher ionic strength, increasing the solubility of ionic compounds like KHT.
Let's understand this in detail:
What is solubility?
Solubility is defined as the ability of a substance to dissolve in a particular solvent under certain conditions. It measures the maximum amount of solute that can be dissolved in a given amount of solvent at a particular temperature, pressure, and other conditions.
Solubility of KHT in pure water:
KHT (Potassium hydrogen tartrate) is a weak acid salt that has low solubility in pure water. The solubility of KHT in pure water is affected by various factors such as temperature, pH, and pressure. The solubility of KHT in pure water is around 4.4 g/L at room temperature.
Solubility of KHT in 0.1 M KCl solution: The solubility of KHT in a 0.1 M KCl solution is predicted to be higher than in pure water. KCl is an ionic salt dissociating in water to produce K+ and Cl- ions. The presence of KCl increases the ionic strength of the solution. This ionic strength improves the solubility of other ionic compounds, such as KHT. KHT has a higher solubility in a 0.1 M KCl solution than in pure water due to this reason.
#SPJ11
Learn more about solubility: Explain how you would find the solubility of a solute https://brainly.com/question/23946616
In a mixture of oxygen and nitrogen gas, 90% of the total gas pressure is exerted by the nitrogen. If the total pressure is 5.0 atm, what pressure does the oxygen exert? (Number only, 1 decimal place)
As a result, oxygen exerts a pressure of 0.5 atm.
What is the oxygen content in the air and the pressure in atm?1013.25 mbar is the atmospheric pressure at sea level (under normal atmospheric circumstances). Here, nitrogen (78.08% vol), oxygen (20.95% vol), argon (0.93% vol), and carbon dioxide (0.040% vol) make up the majority of the dry air.
If nitrogen is responsible for 90% of the total pressure, oxygen is responsible for the remaining 10%.
First, let's calculate the pressure that nitrogen exerts:
Pressure of nitrogen = 90% of total pressure
= 0.9 * 5.0 atm
= 4.5 atm
Now, we can find the pressure exerted by oxygen:
Pressure of oxygen = 10% of total pressure
= 0.1 * 5.0 atm
= 0.5 atm.
To know more about pressure visit:-
https://brainly.com/question/18431008
#SPJ1
what is the concentration (in m) of a sample of the unknown dye with an absorbance of 0.29 at 542 nm?
Answer: The concentration (in m) of a sample of the unknown dye with an absorbance of 0.29 at 542 nm is 1.29 x 10^-5M.
What is the Beer-Lambert law?
The Beer-Lambert law relates the intensity of light absorption to the concentration of the absorbing material present in a sample. According to the Beer-Lambert law, the absorbance of light is directly proportional to the concentration of the absorbing material in the sample and the path length of the light through the sample.
What is the formula to calculate concentration?
The formula to calculate concentration is given as;
C = A/εl
Where,C is the concentration of the sample, A is the absorbance of the sample, ε is the molar absorptivity coefficient of the absorbing material, l is the path length of the light through the sample.
Now, putting the given values in the above formula, we get, C = A/εl
Here,
A = 0.29ε = molar absorptivity coefficient of the absorbing materiall = path length of the light through the sample= 1 cm
So, putting the values in the formula we get,
C = 0.29/(8.6 x 10^3 M^-1cm^-1 × 1 cm)C
= 3.37 x 10^-5 M or 1.29 x 10^-5M (approx)
Hence, the concentration (in m) of a sample of the unknown dye with an absorbance of 0.29 at 542 nm is 1.29 x 10^-5M.
Learn more about concentration here:
https://brainly.com/question/10725862#
#SPJ11
which isotope contributed the greater activity to the radiation cloud? assume that there are no atoms emitted in the accident.
The isotope that contributed the greater activity to the radiation cloud is I-131.
The isotopes that contributed to the radioactivity of the cloud were mostly short-lived isotopes, and hence the isotopes with longer half-lives like Cesium-137 did not contribute much to the activity. Iodine-131 is one such short-lived isotope that had a half-life of 8.1 days.Iodine-131 has an atomic number of 53, and hence it is a radioactive isotope of iodine. The isotope was emitted into the environment as a result of the Chornobyl disaster.
The isotope was a cause of worry as it is readily absorbed by the body and can accumulate in the thyroid gland causing cancer in the long run. The other isotopes that contributed to the radioactivity of the cloud include strontium-90, cesium-134, and cesium-137.
Read more about the isotope:
https://brainly.com/question/14220416
#SPJ11
a concentration cell is constructed using silver metal and .05 m and 1.5 m silver nitrate, what is the cell potential to two significant figures and in volts? ecell
Answer: The cell potential is the measure of how much potential energy the cell has, and it can be calculated by subtracting the standard potentials of each half-cell. The cell potential of this concentration cell is 0.54 V (to two significant figures). This potential difference is the amount of potential energy available in the cell and is measured in volts.
A concentration cell is a cell that is constructed by two half-cells with different concentrations of the same electrolyte. In this case, a concentration cell has been constructed using silver metal and solutions of 0.05 m and 1.5 m silver nitrate. The cell potential is the measure of how much potential energy the cell has, and it can be calculated by subtracting the standard potentials of each half-cell. The cell potential of this concentration cell is 0.54 V (to two significant figures).
The cell potential is determined by the difference in the standard potentials of the two half-cells. The standard potential of the silver half-cell is 0.799 V, and the standard potential of the silver nitrate half-cell (using 0.05 m and 1.5 m concentrations) is 0.259 V. To calculate the cell potential, subtract the standard potential of the silver nitrate from the silver: 0.799 V - 0.259 V = 0.54 V.
The cell potential of a concentration cell is determined by the difference between the standard potentials of the two half-cells, which can be calculated by subtracting the standard potential of the silver nitrate from the silver, resulting in 0.54 V (to two significant figures). This potential difference is the amount of potential energy available in the cell and is measured in volts.
Learn more about concentration cell here:
https://brainly.com/question/12674058#
#SPJ11
PLEASEEEEEEEEE HELP MEEEE AND EXPLAINNNNN
each of the following pairs of solutions produces a reaction. for each reaction, write the balanced molecular and net ionic equations, and classify the reaction as a precipitation, neutralization, gas-forming, or redox reaction. a. sodium carbonate and hydrochloric acid b. silver nitrate and copper c. nickel(ii) bromide and ammonium sulfide d. phosphoric acid and barium hydroxide
A. The reaction is a neutralization reaction.
B. The reaction is a redox reaction.
C. The reaction is a precipitation reaction.
D. The reaction is a neutralization reaction.
The balanced molecular and net ionic equations are below.
A. Sodium Carbonate and Hydrochloric Acid:
The molecular equation is:
Na₂CO₃ + 2HCl → 2NaCl + H₂O + CO₂
The net ionic equation is:
2H⁺ + CO₃²⁻ → H₂O + CO₂
This reaction is a neutralization reaction, producing salt and water.
B. Silver Nitrate and Copper:
The molecular equation is:
2AgNO₃ + Cu → 2Ag + Cu(NO₃)₂
The net ionic equation is:
2Ag⁺ + Cu → 2Ag + Cu²⁺
This reaction is a redox reaction, in which copper metal is produced from copper ions.
C. Nickel(II) Bromide and Ammonium Sulfide:
The molecular equation is:
NiBr₂ + (NH₄)₂S → NiS + 2NH₄Br.
The net ionic equation is:
Ni²⁺ + 2Br⁻ + 2NH₄⁺ + S²⁻ → NiS + 2NH₄Br.
This reaction is a precipitation reaction, in which a solid salt is formed.
D. Phosphoric Acid and Barium Hydroxide:
The molecular equation is:
2H₃PO₄ + 3Ba(OH)₂ → Ba₃(PO₄)₂ + 6H₂O
The net ionic equation is:
6H⁺ + 3Ba²⁺ + 6OH⁻ → Ba⁺ + 6H₂O.
This reaction is a neutralization reaction, producing salt and water.
To know more about the neutralization reaction, refer here:
https://brainly.com/question/28970253#
#SPJ11
Study the chemical equations in the table.
2ZnS(s)+3O2(g)⟶2ZnO(s)+2SO2(g)
Cu2+(aq)+H2S(g)⟶CuS(s)+2H+(aq)
4H+(aq)+2Cl−(aq)+MnO2(s)⟶Mn2+(aq)+Cl2(g)+2H2O(l)
Classify each reactant in the chemical equations as an oxidizing agent, a reducing agent, or neither. O2, MnO2, ZnS, Cu2+, H2S, Cl−, H+
Calculate the increase or decrease in the oxidation state for each element listed as it changes from a reactant to a product. Use a negative sign to show a decrease in oxidation state.
sulfur, beginning in the reactant ZnS. = ___________
sulfur, beginning in the reactant H2S = ___________
chlorine, beginning in the reactant Cl− = ____________
manganese, beginning in the reactant MnO2 = _________
In the chemical equations, the reactants can be classified as follows:
1. O2 is an oxidizing agent as it gains electrons and gets reduced.
2. MnO2 is an oxidizing agent as it gains electrons and gets reduced.
3. ZnS is a reducing agent as it loses electrons and gets oxidized.
4. Cu2+ is an oxidizing agent as it gains electrons and gets reduced.
5. H2S is a reducing agent as it loses electrons and gets oxidized.
6. Cl- is a reducing agent as it loses electrons and gets oxidized.
7. H+ is an oxidizing agent as it gains electrons and gets reduced.
Now, let's calculate the increase or decrease in the oxidation state for each element as it changes from a reactant to a product:
1. Sulfur, beginning in the reactant ZnS, has an oxidation state of -2. In the product SO2, sulfur has an oxidation state of +4. The change in oxidation state is +4 - (-2) = +6.
2. Sulfur, beginning in the reactant H2S, has an oxidation state of -2. In the product CuS, sulfur has an oxidation state of -2. The change in oxidation state is -2 - (-2) = 0.
3. Chlorine, beginning in the reactant Cl-, has an oxidation state of -1. In the product Cl2, chlorine has an oxidation state of 0. The change in oxidation state is 0 - (-1) = +1.
4. Manganese, beginning in the reactant MnO2, has an oxidation state of +4. In the product Mn2+, manganese has an oxidation state of +2. The change in oxidation state is +2 - (+4) = -2.
So the oxidation state changes are:
Sulfur in ZnS = +6
Sulfur in H2S = 0
Chlorine in Cl- = +1
Manganese in MnO2 = -2
#SPJ11
Learn more about oxidizing agent: What is an oxidizing agent? https://brainly.com/question/14041413
chemoorganotroph and a photoautotroph would not be competing with each other for (choose all that apply) a. carbon b. light c. nitrogen d. oxygen
The chemoorganotroph and a photoautotroph would not be competing with each other for carbon and light.
The chemoorganotroph is a microorganism which derives its energy from organic compounds. It uses organic carbon as its electron donor and chemical energy source. Chemoorganotrophs can be found in a variety of environments, including soil, water, and the human body.
The photoautotroph is a microorganism that is capable of generating its organic food using sunlight and carbon dioxide. It converts carbon dioxide and water into organic compounds that it uses to create energy through photosynthesis.
Competition is an interaction between two or more organisms or populations that use the same limited resources, resulting in a decrease in the availability of these resources. In this context, chemoorganotrophs and photoautotrophs do not compete for carbon and light.
Therefore, the correct options are (a) carbon and (b) light.
Learn more about chemoorganotroph: https://brainly.com/question/29872582
#SPJ11
a solution made with of a triprotic acid ( , ; ; ) dissolved in of solution, was titrated with . answer the following question about the of the solution, during this titration experiment: what is the ph of the solution when you have added of naoh solution?
The pH of the solution is equal to the pKa₁ of the tri-protic acid.
The pH of a solution made with a tri-protic acid dissolved in water, when titrated with NaOH, can be determined using the following equation:
pH = pKa₁ + log10 [NaOH]/[acid]
Where pKa₁ is the first dissociation constant of the acid and [NaOH] and [acid] is the molar concentrations of the NaOH and acid solutions, respectively.
In this titration experiment, if you have added 0.1 moles of NaOH solution, then the molar concentration of the NaOH solution is 0.1 M and the molar concentration of the acid solution remains unchanged. Substituting these values into the equation, we can calculate the pH of the solution:
pH = pKa₁ + log10 [0.1/[acid]] = pKa₁ + 0 =pKa₁
Therefore, the pH of the solution when 0.1 moles of NaOH has been added is equal to the pKa₁ of the tri-protic acid.
To know more about pH, refer here:
https://brainly.com/question/491373#
#SPJ11
according to the vsepr model, the electron-pair arrangement of the central atom in bh3 is predicted to be .
According to the VSEPR model, the electron-pair arrangement of the central atom in BH₃ is predicted to be trigonal planar.
What is VSEPR Theory?VSEPR stands for Valence Shell Electron Pair Repulsion. It is a model used in chemistry to predict the shape of individual molecules based on the extent of electron-pair electrostatic repulsion. It is founded on the Lewis structure theory of bonding, which describes electron pairs as lone pairs and bonds. Furthermore, VSEPR is based on the idea that electrons repel one another because they are negatively charged.
How does VSEPR Theory predict the electron-pair arrangement of BH₃?The electron-pair arrangement of the central atom in BH₃ is predicted to be trigonal planar by the VSEPR model.
BH₃ is a boron atom bonded to three hydrogen atoms. Boron has three valence electrons, but it requires six valence electrons to satisfy the octet rule. This means that boron has a vacant p orbital that it can use to form a molecule. The three hydrogen atoms are covalently bonded to the boron atom, with each hydrogen atom sharing one electron pair with the boron atom.
Based on this electron-pair arrangement, the VSEPR model predicts that the molecule will have a trigonal planar geometry. This means that the three hydrogen atoms will be positioned around the boron atom at the corners of an equilateral triangle. This arrangement causes the electron pairs in the valence shell to be as far apart as possible, resulting in a repulsion-free arrangement that is energetically stable.
Thus, the structure of BH₃ will be a trigonal planar.
To know more about the VSEPR Theory, refer here:
https://brainly.com/question/14574141#
#SPJ11
Calculate the pH of a 0.050 M solution of hydroxylamine, NH2OH. Kb = 6.6 x 10^-9
The pH of hydroxylamine will be 8.76.
The first step is to write the balanced equation for the reaction of hydroxylamine with water:
NH₂OH + H₂O ⇌ NH₃OH⁺ + OH⁻
The Kb expression for this reaction is:
Kb = [NH₃OH⁺][OH⁻] / [NH₂OH]
We are given the Kb value as 6.6 x 10⁻⁹, so we can use this to find the concentration of hydroxylamine that has been deprotonated:
Kb = [NH₃OH⁺][OH⁻] / [NH₂OH]
6.6 x 10⁻⁹ = x² / (0.050 - x)
Assuming that x is very small compared to 0.050, we can simplify the expression as follows:
6.6 x 10⁻⁹ = x² / 0.050
x² = 3.3 x 10⁻¹⁰
x = 5.7 x 10⁻⁶ M
Now that we have the concentration of hydroxide ions, we can use this to find the pH of the solution:
pOH = -log[OH-] = -log(5.7 x 10⁻⁶) = 5.24
pH = 14.00 - pOH = 8.76
Therefore, the pH of a 0.050 M solution of hydroxylamine is 8.76.
Learn more about pH on:
https://brainly.com/question/172153
#SPJ11
the student then prepares a solution using four pellets of naoh dissolved to 100.00 ml in a volumetric flask. the student slowly adds this to the khp solution to perform a titration. it requires 22.50 ml of the naoh solution to reach the endpoint. what is the molarity of the naoh solution based on this titration?
The volume of NaOH solution used in the titration is 22.50 mL or 0.0225 L. The molarity of the NaOH solution is 0.210 mol/L.
To determine the molarity of the NaOH solution, we can use the balanced chemical equation for the reaction between NaOH and KHP:
NaOH + KHP → NaKP + H2O
From the equation, we can see that one mole of NaOH reacts with one mole of KHP. Therefore, the number of moles of NaOH used in the titration can be calculated by:
moles NaOH = molarity of NaOH solution × volume of NaOH solution used (in liters)
The volume of NaOH solution used in the titration is 22.50 mL or 0.0225 L.
To calculate the molarity of the NaOH solution, we need to determine the number of moles of NaOH used in the titration. From the balanced equation, we can see that one mole of KHP reacts with one mole of NaOH. The mass of KHP used in the titration is 0.969 g, which corresponds to the number of moles of KHP used:
moles KHP = mass of KHP / molar mass of KHP
= 0.969 g / 204.22 g/mol
= 0.004738 mol
Since the stoichiometry of the reaction is 1:1, the number of moles of NaOH used in the titration is also 0.004738 mol. Substituting these values into the above equation, we get:
0.004738 mol = molarity of NaOH solution × 0.0225 L
Solving for the molarity of the NaOH solution, we get:
molarity of NaOH solution = 0.004738 mol / 0.0225 L
= 0.210 mol/L
To learn more about molarity
https://brainly.com/question/8732513
#SPJ4
generally speaking, what should the rf value of your desired compound be to get a good separation in a column chromatography experiment?
Generally speaking, a good separation will result when the RF value of the desired compound is within the range of 0.2 to 0.8 in a column chromatography experiment.
The RF value is a ratio of the distance a compound has moved on a chromatogram to the distance the solvent front moved.
The distance a compound travels is measured from the starting point to the centre of the spot. The RF value is used to compare substances and can be used to determine whether two or more compounds are identical.
The RF value can be influenced by various factors including solvent composition, the type of adsorbent used, and the temperature of the chromatography experiment. The solvent composition is the most important factor that affects the RF value.
The polarity of the solvent used is an important factor, as polar solvents are better at dissolving polar compounds, while nonpolar solvents are better at dissolving nonpolar compounds.
The type of adsorbent used in chromatography is also important, as different adsorbents have different polarities and will attract different compounds differently.
The temperature at which the chromatography is performed is also important, as different compounds have different boiling points and may be affected differently by changes in temperature.
To know more about RF value refer here:
https://brainly.com/question/17796724#
#SPJ11
Name the following
ionic compounds:
Na Cl
Mg0
CO
CO₂
Na F
Answer: NaCl: Sodium chloride
MgO: Magnesium oxide
CO: Carbon monoxide (Note: this is a covalent compound, not an ionic compound)
CO₂: Carbon dioxide (Note: this is a covalent compound, not an ionic compound)
NaF: Sodium fluoride
when a system is at dynamic equilibrium, a) no reactions are occurring. b) a reaction is occurring in only one direction. c) the rates of the forward and reverse reactions are equal. d) all of the reactants have been converted to products
c) The rates of the forward and reverse reactions are equal. When the forward and reverse processes move ahead and backward at the same pace, with no discernible change in the system, this is referred to as dynamic equilibrium for reversible processes.
Dynamic equilibrium occurs when, given a reversible process, the rate of the forward reaction equals the rate of the reverse reaction. Although it appears that nothing is happening because the two rates are equal, the reaction is actually continuing at its steady rate. The equilibrium state is one in which there is no net change in the concentrations of reactants and products. The opposite is true; at equilibrium, both forward and reverse reactions proceed at the same rate, maintaining the net concentrations of reactants and products as is.
Learn more about equilibrium here:
https://brainly.com/question/14929208
#SPJ4
liquid hydrogen is used as one part of the booster fuel in the space shuttle. what type of forces exist between hydrogen molecules in liquid hydrogen?
Liquid hydrogen is held together by dispersion forces, which are weak attractions between molecules caused by the uneven distribution of electrons.
The dispersion force is a type of force that exists between molecules. This force is very weak and temporary, but it can be sufficient to bind the atoms of some molecules together in a molecule. Dispersion forces are sometimes known as London forces, van der Waals forces, or instantaneous dipole-induced dipole forces.
The dispersion force is caused by the motion of electrons within the molecule. Electrons are always in motion, and sometimes the electrons in a molecule will happen to accumulate more on one side of the molecule than on the other. When this happens, a temporary electric dipole moment is created, which can attract or repel other molecules nearby. The dispersion force is an attractive force because the temporary electric dipole moment can attract other molecules.
Learn more about dispersion force at https://brainly.com/question/1432999
#SPJ11
how would u make a 1.0L of a 0.1 M solution of AgNO3?
Answer:
You need to dissolve 16.988 g of AgNO3 in enough water to make a final volume of 1.0 L to make a 0.1 M solution of AgNO3.
Explanation:
To make a 1.0 L of a 0.1 M solution of AgNO3, you need to know the molar mass of AgNO3, which is:
Ag = 107.87 g/mol
N = 14.01 g/mol
O = 16.00 g/mol (there are three O atoms, so 3 x 16 = 48.00 g/mol)
Total = 169.88 g/mol
Next, you need to calculate the mass of AgNO3 required to make a 0.1 M solution in 1.0 L of water:
0.1 moles/L * 1.0 L = 0.1 moles
Mass = moles x molar mass
Mass = 0.1 moles x 169.88 g/mol
Mass = 16.988 g
Therefore, you need to dissolve 16.988 g of AgNO3 in enough water to make a final volume of 1.0 L to make a 0.1 M solution of AgNO3.
calculate the ph for each case in the titration of 50.0 ml of 0.210 m hclo(aq) with 0.210 m koh(aq). use the ionization constant for hclo.
The initial pH of the titration is 2.50 and the final pH of the titration is: -1.67.
To calculate the pH for each case in the titration of 50.0 mL of 0.210 M HClO (aq) with 0.210 M KOH (aq), you must first use the ionization constant for HClO. The ionization constant for HClO is equal to 1.5 x 10-2. Now, you can calculate the pH of the titration.
At the beginning of the titration, the pH can be determined by the initial concentration of HClO (0.210 M). Since HClO is a weak acid, it partially dissociates in water, releasing hydrogen ions. The [H+] is equal to the HClO initial concentration multiplied by the ionization constant: [tex][H+] = 0.210 x 1.5 x 10-2 = 3.15 x 10-3[/tex]
The pH can be determined by the negative logarithm of the [tex][H+], or pH = -log[H+][/tex]. So, the initial pH of the titration is [tex]-log (3.15 x 10-3) = 2.50.[/tex]
As the titration proceeds, the pH will increase due to the addition of KOH, a strong base. The final pH of the titration can be calculated in the same manner. At the equivalence point, the [H+] is equal to the KOH initial concentration multiplied by the ionization constant:[tex][H+] = 0.210 x 1 = 0.210.[/tex]
The pH of the equivalence point is [tex]-log (0.210) = -1.67.[/tex] To summarize, the initial pH of the titration is 2.50 and the final pH of the titration is -1.67.
To know more about titration refer here:
https://brainly.com/question/2728613#
#SPJ11
which molecule would you expect to be more soluble in ethanol ch3ch2oh), ccl4 or ch2cl2? explain your choice.
Answer: Among CCl4, CH2Cl2 and ethanol, CH2Cl2 is the molecule that is more soluble in ethanol (CH3CH2OH).
Explanation:
Solubility can be defined as the amount of substance that can dissolve in a solvent. The amount of substance that can be dissolved in a solvent depends on various factors such as the polarity of the molecule and the intermolecular forces acting between the solvent and the solute.
Solvents that have the same polarity will dissolve each other. The polar and nonpolar nature of the molecule will help in deciding its solubility in a solvent.
Ethanol is a polar molecule with a hydroxyl group that can form hydrogen bonds with other molecules. Ethanol can dissolve polar or ionic molecules very well and hence, it is used as a solvent for many applications.
On the other hand, CCl4 is a nonpolar molecule and doesn't dissolve in polar solvents like water. In CCl4, the four chlorine atoms are equally distributed around the carbon atom, giving it a tetrahedral shape. The bond dipoles cancel each other out and hence, the molecule doesn't have a net dipole moment.
CH2Cl2 is a polar molecule with a dipole moment due to the difference in electronegativity between the carbon, hydrogen and chlorine atoms. The C-Cl bond is polar and creates a dipole moment that can interact with the polar solvent, ethanol. Hence, CH2Cl2 is more soluble in ethanol than CCl4.
Learn more about solubility here:
https://brainly.com/question/29661360#
#SPJ11
what is the ph of a 0.785 m solution of formic acid, hcho2? the ka of hcho2 is 1.77 x 10-4
Answer:
nerd
Explanation:
nerd
Answer: The pH of a 0.785 M solution of formic acid (HCHO2) is 3.85.
The pH of a 0.785 M solution of formic acid (HCHO2) can be calculated using the Ka value of 1.77 x 10-4. First, we calculate the concentration of the hydrogen ion, [H+], in the solution:
[H+] = Ka x [HCHO2] = 1.77 x 10-4 x 0.785 = 1.39 x 10-4 mol/L
The pH of the solution is equal to the negative logarithm of the hydrogen ion concentration:
pH = -log[H+] = -log(1.39 x 10-4) = 3.85
Therefore, the pH of a 0.785 M solution of formic acid (HCHO2) is 3.85.
Learn more about ph level here:
https://brainly.com/question/1458045#
#SPJ11