calculate the percent ionization of 0.0075 m butanoic acid in a solution containing 0.075 m sodium butanoate.

The solubility of a gas in a liquid depends on several factors, such as the nature of the gas and the liquid, temperature, and pressure.

According to Henry’s law, the solubility of a gas in a liquid is directly proportional to the partial pressure of the gas above the liquid. This means that as the pressure of the gas increases, more gas molecules can dissolve in the liquid. Conversely, as the pressure of the gas decreases, less gas molecules can dissolve in the liquid.

Therefore, out of the four options given, the decreased temperature is the correct answer. Decreased temperature increases the solubility of a gas in a liquid because it reduces the kinetic energy of the gas molecules, making them less likely to escape from the liquid surface. Increased temperature decreases the solubility of a gas in a liquid because it increases the kinetic energy of the gas molecules, making them more likely to escape from the liquid surface. Increased or decreased volume of the gas does not affect its solubility in a liquid, as long as its partial pressure remains constant.

to know more about Henry's law click here:

https://brainly.com/question/23204201

#SPJ4

A slight decrease in first ionization energy upon going from p to s can be attributed to a screening effect or increased electron-electron repulsion.

What is ionization energy?

The energy required to remove an electron from a gaseous atom or ion is known as ionization energy. The amount of energy required to remove the most loosely bound electron from the gaseous atom or ion is referred to as the first ionization energy. Ionization energy is a physical property that varies with the atomic or ionic radius, the ionization potential, and the degree of electron-electron interaction.

A slight decrease in first ionization energy upon going from p to s can be attributed to what factor?

A screening effect or increased electron-electron repulsion is the factor that can be attributed to a slight decrease in first ionization energy when moving from p to s. As we go from left to right on the periodic table, the ionization energy rises. It occurs because the effective nuclear charge, or the number of protons in the nucleus minus the number of electrons between the nucleus and the valence electron, increases as we go from left to right.The electrons in the inner shells shield the valence electrons from the nucleus's positive charge. The first ionization energy of atoms with similar valence electron configuration decreases as we go down the periodic table. The electrons in the outermost orbital are further away from the nucleus and are more shielded from the attractive power of the nucleus as we go down the periodic table. As a result, less energy is required to remove the valence electron.

To know more about ionization energy click here:

brainly.com/question/1602374

#SPJ11

F = ma

a = F/m

a = 150N/165kg

a = 0.909 m/s²

H3P(aq) is the chemical formula for phosphoric acid, which is a mineral acid commonly used in the production of fertilizers and food additives.

What is Chemical Name?

A chemical name is the name given to a specific chemical compound that describes the type and number of atoms present in the compound. It is different from a chemical formula, which uses chemical symbols and subscripts to indicate the number and type of atoms in a molecule or formula unit of a compound.

Phosphoric acid (H3P) is a colorless, odorless, and highly soluble inorganic acid that contains one phosphorus atom, three hydrogen atoms, and four oxygen atoms. In aqueous solution, it dissociates to produce hydrogen ions (H+) and phosphate ions (H2PO4- and HPO42-). The chemical formula H3P(aq) is used to indicate that the phosphoric acid is dissolved in water to form an aqueous solution.

Learn more about Chemical Name from the given link

https://brainly.com/question/29594386

#SPJ1

When the second ionization energy of Mg is 1445 kj/mol, then the first ionization energy is less than 1445 kj/mol. Thus, (option b) less than 1445 kj/mol is the correct answer.

Ionization energy is the minimum amount of energy required to remove one mole of electrons from a mole of gaseous atoms or ions in the ground state (at zero degrees Kelvin).

The ionization energy of a given element increases as the nuclear charge or atomic number increases, indicating that the electrons are being held more tightly.

1. Ionization energy refers to the energy required to remove an electron from an atom or ion.

2. The first ionization energy is the energy needed to remove the first electron, while the second ionization energy is the energy needed to remove the second electron.

3. In general, the ionization energy increases as electrons are removed, because the remaining electrons are more strongly attracted to the positively charged nucleus.

4. Since the second ionization energy of Mg is 1445 kJ/mol, the first ionization energy must be less than this value, as it takes less energy to remove the first electron.

to know more about ionization energy refer here:

https://brainly.com/question/28385102#

#SPJ11

The equilibrium constant Kb for the reaction is 4.59 x 10^-10.

The equilibrium constant expression for the reaction between aniline and water is

Kb = [C6H5NH2][OH-] / [C6H5NH3+]

where [C6H5NH2] is the concentration of aniline, [OH-] is the concentration of hydroxide ions, and [C6H5NH3+] is the concentration of anilinium

The pOH of the solution can be calculated from the pH:

pH + pOH = 14

pOH = 14 - 8.82 = 5.1

The concentration of hydroxide ions can be calculated from the pOH:

pOH = -log[OH-]

[OH-] = 10^-5.18 = 6.91 x 10^-6 M

The concentration of aniline can be calculated from the molarity and volume of the solution:

n = C x V = 0.10 mol/L x 0.025 L = 2.5 x 10^-3 mol

[C6H5NH2] = n / V = 2.5 x 10^-3 mol / 0.025 L = 0.1 M

The concentration of anilinium ions can be calculated from the concentration of aniline and the concentration of hydroxide ions using the equilibrium constant expression:

Kb = [C6H5NH2][OH-] / [C6H5NH3+]

[C6H5NH3+] = [C6H5NH2][OH-] / Kb = (0.1 M)(6.91 x 10^-6 M) / Kb

Now we can use the equation for the ionization constant of water (Kw = [H+][OH-] = 1.0 x 10^-14) to find the concentration of H+ ions:

Kw = [H+][OH-] = (1.0 x 10^-14) M^2 = ([C6H5NH3+])([OH-]) = (0.1 M)(6.91 x 10^-6 M)

[H+] = sqrt(Kw / [OH-]) = sqrt(1.0 x 10^-14 / 6.91 x 10^-6) = 1.51 x 10^-5 M

pH = -log[H+] = -log(1.51 x 10^-5) = 4.82

The equilibrium constant Kb can be calculated from the expression:

Kb = [C6H5NH2][OH-] / [C6H5NH3+]

Kb = (0.1 M)(6.91 x 10^-6 M) / (1.51 x 10^-5 M) = 4.59 x 10^-10

To learn more about Equilibrium :

https://brainly.com/question/19340344

#SPJ11

When solid ammonium hydrogen carbonate is added to water, the following process occurs: (NH₄)HCO₃(s)  NH₄+(aq) + HCO₃-(aq).

When dissolved in water, the soluble ionic compound ammonium carbonate (NH₄)2CO₃ fully dissociates into ammonium cations (NH⁺⁴) and carbonate anions (CO₂). All is well so far. The hydrolysis of the ammonium ion produces ammonia, NH₃, and hydronium ions, H₃O+.

The balanced equation states that warmth causes ammonium carbonate to break down: NH₃(g) + CO₂(g) + H₂O = (NH₄)2CO₃(s)( g) Determine the total volume of gas created by the full breakdown of 11.83 g of ammonium carbonate at 22 °C and 1.02 atm.

To know more about ammonium hydrogen visit:-

https://brainly.com/question/15252971

#SPJ9

Partial pressure of CO2 in the mixture is 0.350 atm.

We need to use mole fraction of [tex]CO_{2}[/tex] to find the partial pressure of CO2 in the mixture

First calculate the moles of carbon dioxide and CH4 in the mixture. Now can use the molar mass of each gas. Then convert the given masses to moles.

moles of [tex]CO_{2}[/tex] = 4.34 / 44.01  = 0.0987 mol

moles of [tex]CH_{4}[/tex] = 3.08  / 16.04 = 0.192 mol

Now have to calculate the total moles of gas.

Total moles = moles of [tex]CO_{2}[/tex] + moles of CH4 = 0.0987 mol + 0.192 mol = 0.2907 mol

Now we will calculate the mole fraction of CO2,

mole fraction of  [tex]CO_{2}[/tex] = moles of [tex]CO_{2}[/tex] / total moles = 0.0987 mol / 0.2907 mol = 0.3396

Finally, mole fraction to calculate the partial pressure of CO2

partial pressure of CO2 = mole fraction of CO2 x total pressure = 0.3396 x 1.03 atm = 0.350 atm

Therefore the partial pressure is 0.350 atm.

Learn more about Partial pressure:

https://brainly.com/question/15082496

#SPJ4

To find the moles of the gas , we can use the ideal gas law. Which states -

[tex] \:\:\:\:\:\:\:\:\:\star\longrightarrow \sf \underline{PV=nRT} \\[/tex]

Where:-

As per question, we are given that-

Now that we have all the required values, so we can put them all in the Ideal gas law formula and solve for moles -

[tex] \:\:\:\:\:\:\:\:\:\star\longrightarrow \sf \underline{PV=nRT} \\[/tex]

[tex] \:\:\:\:\:\:\:\:\:\longrightarrow \sf 1.55 \times 58 = n \times 0.0821 \times 222\\[/tex]

[tex] \:\:\:\:\:\:\:\:\:\longrightarrow \sf 89.9 = n \times 18.2262\\[/tex]

[tex] \:\:\:\:\:\:\:\:\:\longrightarrow \sf n \times 18.2262 =89.9\\[/tex]

[tex] \:\:\:\:\:\:\:\:\:\:\:\:\longrightarrow \sf n = \dfrac{89.9}{18.2262}\\[/tex]

[tex] \:\:\:\:\:\:\:\:\:\:\:\:\longrightarrow \sf n =4.9324......\\[/tex]

[tex]\:\:\:\:\:\: \:\:\:\:\:\:\longrightarrow \sf \underline{n =4.93 \:moles }\\[/tex]

Therefore, 4.93 moles of gas will be occupied 58 L at a pressure of 1.55 atmospheres and a temperature of 222 k

The partial pressure of [tex]O_{2}[/tex] is  2.53 atm  which is calculated using the Ideal gas law.

We can use the ideal gas law to find the total moles of gas present

PV = n RT

n = PV/RT

  = (4.90 atm.) (3.00 L)/(0.0821 L atm. / K mole ) (273K)

n is the 0.656 moles of gas

Now we have to find the pressure of N2

mole fraction N2 = 0.270 mole/0.656 mole

                            = 0.412

Pressure of N2 gas is equals to,

                         =  mole fraction x total pressure

                         = 0.412 x 4.90

                         = 2.02 atm.

We know that the  total pressure = pressure O2 + pressure N2 + pressure CO2

Now we have to find the partial pressure O2.

  = 4.90 atm. - 2.02 atm. - 0.350 atm.

  = 2.53 atm.

To learn more about the Ideal gas law

https://brainly.com/question/15132707

#SPJ4

The correct question is,

Suppose that Daniel has a 3.00 L bottle that contains a mixture of O2 , N2 and CO2 under a total pressure of 4.90 atm. He knows that the mixture contains 0.270 mole N2 and that the partial pressure of CO2 is 0.350  atm. If the temperature is 273  K, what is the partial pressure of O2 ?

The cofactor in the reaction shown is Vitamin K. Option 1 is correct.

Vitamin K is a fat-soluble vitamin that plays a crucial role in blood clotting. It is required for the post-translational modification of certain proteins involved in blood coagulation, including prothrombin and factors VII, IX, and X. These proteins require a specific type of chemical modification, known as gamma-carboxylation, in order to be fully functional. Vitamin K serves as a cofactor for the enzyme that catalyzes this reaction.

Without adequate levels of vitamin K, blood clotting can be impaired, leading to increased bleeding and bruising. Conversely, excess vitamin K can interfere with certain medications used to prevent blood clots, such as warfarin. In summary, vitamin K is an essential cofactor in the blood coagulation cascade, and deficiencies or excesses can have significant clinical implications. Option 1 is correct.

The complete question is

What compound is the cofactor in the reaction shown?

To know more about the Cofactor, here

https://brainly.com/question/29818232

#SPJ4

The relationship between the number of moles and volume is a fundamental concept in the study of gases and their behavior under various conditions.

The relationship between the number of moles (n) and volume (V) in a balloon can be described by the Ideal Gas Law, which states:

PV = nRT

Here, P represents pressure, V is volume, n is the number of moles, R is the ideal gas constant, and T is temperature.

Therefore, the relationship between the number of moles (n) and volume (V) can be simplified to:

V = n (RT/P)

Since R, T, and P are constant values, the relationship between the number of moles (n) and volume (V) is directly proportional.

This means that as the number of moles in the balloon increases, the volume of the balloon also increases, and vice versa.  Similarly, if the number of moles in the balloon decreases, the balloon will contract, resulting in a decrease in volume.

Know more about Ideal Gas Law here :

brainly.com/question/27870704

#SPJ11

The change in the number of moles of gas, Δn_gas, in a chemical reaction can be determined by comparing the total number of moles of gaseous reactants to the total number of moles of gaseous products.

To determine δn_gas (change in moles of gas) in a chemical reaction, follow these steps:

δn_gas = moles of gas (products) - moles of gas (reactants)
Remember to only consider the gaseous species when calculating δn_gas.

To know more about "Moles" refer here:

https://brainly.com/question/24191825#

#SPJ11

The given statement "A precipitate of lead(ii)chloride forms when 200.0 mg of NaCl is dissolved in 0.250 l of 0.12 m lead(ii)nitrate" is true because the ion product, Q, exceeds the solubility product constant, Ksp, for lead(II) chloride.

The first step in solving this problem is to determine whether or not a precipitate of lead(II) chloride will form. This can be done by calculating the ion product, Q, and comparing it to the solubility product, Ksp.

The balanced equation for the reaction is:

Pb(NO₃)₂ + 2NaCl → PbCl₂ + 2NaNO₃

From the equation, we can see that 1 mol of Pb(NO₃)₂ reacts with 2 mol of NaCl to form 1 mol of PbCl₂. Therefore, the moles of Pb(NO₃)₂ in the solution are:

0.12 mol/L x 0.250 L = 0.030 mol

The moles of NaCl in the solution are:

(200.0 mg / 58.44 g/mol) / 0.250 L = 0.0136 mol

Since there are 2 moles of NaCl for every 1 mole of Pb(NO₃)₂, the limiting reactant is NaCl, and all of it will react. This means that 0.0136 mol of PbCl₂ will be formed.

Now, we can calculate the ion product, Q, using the concentrations of Pb²⁺ and Cl⁻ ions in the solution:

[Pb²⁺] = 0.0136 mol / 0.250 L = 0.0544 M

[Cl⁻] = 2 x 0.0136 mol / 0.250 L = 0.109 M

Q = [Pb²⁺][Cl⁻]² = 0.0544 M x (0.109 M)² = 0.000654

Since Q < Ksp, a precipitate of PbCl² will form.

This problem involves the use of the solubility product, Ksp, which is a measure of the maximum amount of a compound that can dissolve in a solution at a given temperature. If the ion product, Q, exceeds Ksp, a precipitate will form.

In this case, we are given the Ksp of PbCl₂, which is 1.7 x 10⁻⁵. We are also given the concentration of Pb(NO₃)₂ and the mass of NaCl, from which we can calculate its concentration. Using these values, we can determine the moles of PbCl₂ that will be formed and the concentrations of Pb²⁺ and Cl⁻ ions in the solution. Finally, we calculate Q and compare it to Ksp to determine whether or not a precipitate will form.

To know more about the Precipitate, here

https://brainly.com/question/29342832

#SPJ4

The shorthand notation using the noble gas inner core is:

Pb: [Xe] 4f^14 5d^10 6s^2 6p^2

The atomic number of lead (Pb) is 82, which means it has 82 electrons. To write the electron configuration of Pb, we first determine the electron configuration of the nearest noble gas, which is xenon (Xe) with the electron configuration [Kr] 4d^10 5s^2 5p^6.

We then add the remaining electrons for Pb:

Pb: [Xe] 4f^14 5d^10 6s^2 6p^2

Find more about electron configuration

brainly.com/question/3664948

#SPJ4

The density of a cube that measures 72g and all sides of the cube measure 2cm is [tex]9000kg/m^3.[/tex]

Given the mass of cube (m) = 72g = 0.072kg

The length of side of cube (a) = 2cm = 0.02m

Let the density of cube = d

The density of a cube can be calculated by dividing the mass (in grams) by the volume (in cubic centimeters). The volume of a cube can be calculated by cubing the length of one side.

The volume of cube is measured as [tex](V) = a^3[/tex] then:

[tex]V = (0.02)^3 = 8 * 10^{-6}m^3[/tex]

We know that the density is calculated as mass per unit volume such that d = m/V

[tex]d = 0.072kg/8 * 10^{-6}m^3 = 9 *10^{3}kg/m^3[/tex]

To learn more about density click here https://brainly.com/question/29775886

#SPJ1

48.18 g of S8 were generated in this reaction. If 1 mole of Fe and 8 moles of S combine to form 8 moles of FeS.

The reaction's balanced chemical equation is 8 FeS (s) + S8 → 8 FeS. (s)

1 mole S8 divided by 8 moles FeS yields 0.1875 moles S8.

We must utilize S8's molar mass to convert moles to grams. S8 has the following molar mass: 8 32.06 g/mol = 256.48 g/mol

The mass of S8 that was involved in the reaction is as follows: 0.1875 moles S8 256.48 g/mol = 48.18 g S8 (rounded to two significant figures)

The response is 48.18 g.

To learn more about mass of product visit:

brainly.com/question/19694949

#SPJ9

The correct option is A and E.  A short-stem funnel can be used for vacuum filtration. and the dimensions of the funnel need to be adjusted primarily based at the quantities being treated.

Filtration is a commonly used separation technique in chemistry that involves the physical separation of solid particles from a liquid or gas by passing the mixture through a filter medium. The filter medium is usually a porous material, such as paper, glass wool, or a membrane, that allows the liquid or gas to pass through while trapping the solid particles.

Filtration is used in a wide range of applications, including water purification, air purification, and the separation of solid and liquid phases in chemical reactions. In analytical chemistry, filtration is often used to separate solid precipitates from a solution to isolate and analyze the desired product. Filtration can be performed using a variety of different filter media and techniques, including gravity filtration, vacuum filtration, and pressure filtration.

To learn more about Filtration visit here:

brainly.com/question/31326542

#SPJ4

Complete Question:

which statements are correct regarding a vacuum filtration? (take a look at all that practice.) institution of answer choices

A). a brief-stem funnel may be used for a vacuum filtration.

B). the answer can not be too acidic or too basic while using filter paper.

C). no filter out paper is wanted whilst the usage of a hirsch funnel.

D). vacuum filtration works nicely with boiling solutions.

E). the dimensions of the funnel need to be adjusted primarily based at the quantities being treated.

The new HCL concentration is 1.11. Mathematically, concentration is calculated by dividing the mass, moles, or volume of the solute by the mass, moles, or volume of the solution (or, less commonly, the solvent).

(2.50) * (0.400) = (M₂) * (0.900)

(2.50 * 0.400) / 0.900 = M₂

(2.50 * 4) / 9 = M₂

1.11 = M₂

Both hydrogen chloride gas and aqueous hydrochloric acid are referred to as HCl. The reaction between hydrogen and chlorine produces the colourless gas known as hydrogen chloride. When it comes into contact with ambient humidity, it emits white vapours of hydrochloric acid. Hydrochloric acid is a potent mineral acid that has a wide range of industrial applications. Gastric acid naturally contains hydrochloric acid. In technology and industry, hydrochloric acid and hydrogen chloride gas are crucial.

Learn more about HCL here: brainly.com/question/3637432

#SPJ4

Answer: carbon dioxide

Explanation:During separation of air by fractional distillation method, air undergoes compression by increasing the pressure and cooling by decreasing the temperature. After this point air gets converted into a liquid state and the carbon dioxide present in the air, converted into a solid form which is known as dry ice and separated at this point of time.

The pressure required to compress 198 L of air at 2.5 atm into a cylinder whose volume is 35 L is approximately 14.14 atm.

We can use Boyle's law, which states that the pressure and volume of a gas are inversely proportional at a constant temperature, to solve this problem. The equation for Boyle's law is:

P1V1 = P2V2

where P1 and V1 are the initial pressure and volume of the gas, and P2 and V2 are the final pressure and volume of the gas.

In this problem, we have:

P1 = 2.5 atm (the initial pressure of the air)

V1 = 198 L (the initial volume of the air)

V2 = 35 L (the final volume of the air, after compression)

We need to find P2, the final pressure of the air after compression. To do so, we can rearrange Boyle's law equation to solve for P2:

P2 = P1V1/V2

Substituting the values given, we get:

P2 = 2.5 atm x 198 L / 35 L

P2 = 14.14 atm (rounded to two decimal places)

The pressure required to compress 198 L of air at 2.5 atm into a cylinder whose volume is 35 L is approximately 14.14 atm.

learn more about pressure here

https://brainly.com/question/24719118

#SPJ1

A. Balanced reactions and reaction type is given below as asked in question above :

C₂H₂ + 5 O₂ → 4 CO₂ + 2 H₂O (combustion)

2 NaOH + Cl₂ → NaCl + NaClO + H₂O (double-displacement)

Fe + 2 HCl → FeCl₂ + H₂ (single-displacement)

P₄ + 5 O₂ → P₄O₁₀ (synthesis)

2 Fe + 2 NaOH + H₂O → 2 Fe(OH)₂ + 2 Na⁺ (double-displacement)

2 NaHCO₃ → 2 NaNO₃ + H₂O + 2 CO₂ (decomposition)

B. Reaction type:

3 Na₃PO₄ + K₃PO₄ → 6 NaOH + 2 K₃PO₄ (double-displacement)

PbSO₄ + Fe → Pb + FeSO₄ (single-displacement)

B₂O₃ + 6 HF → 2 BF₃ + 3 H₂O (double-displacement)

2 Al + 6 HCl → 2 AlCl₃ + 3 H₂ (single-displacement)

2 H₂O₂ → O₂ + 2 H₂O (decomposition)

Fe(OH)₃ + 3 NaCl → FeCl₃ + 3 NaOH (double-displacement)

To know more about double-displacement, visit:

https://brainly.com/question/29307794

#SPJ1

Sodium phosphate and calcium chloride reacts to form sodium chloride and calcium phosphate. If we have 379.4 grams of calcium chloride and an excess of sodium phosphate, we can make 353.3g of calcium phosphate.

The balanced chemical equation of sodium phosphate and calcium chloride to form sodium chloride and calcium phosphate is given as

2Na₃PO₄ + 3CaCl₂ → 6NaCl + Ca₃(PO₄)₂

We will convert given grams of calcium chloride into moles.

Using mol ratio, the moles of calcium phosphate are calculated and converted to grams as:

we know that,

Molar mass of calcium chloride is 110.98 gram /mol

And molar mass of calcium phosphate is 310 gram/mol.

By using dimensional analysis we get:

=379.4 g CaCl₂ (1 mol CaCl₂/ 110.98gCaCl₂)(1 molCa₃(PO₄)₂/3 molCaCl₂ )(310gCa₃(PO₄)₂/1 mol Ca₃(PO₄)₂)

=353.3 g Ca₃(PO₄)₂

Thus, 353.3 grams of calcium phosphate can be formed from the reaction

To know more about calcium phosphate here

https://brainly.com/question/2396369

#SPJ4

The complete question should be:

Sodium phosphate and calcium chloride react to form sodium chloride and calcium phosphate. If you have 379.4 grams of calcium chloride and an excess of sodium phosphate, how much calcium phosphate can you make?

The reaction that occurs when the starting material is a carboxylic acid is called esterification. carboxylic acids react with alcohols in acid to form the functional group ester.

Esterification is a chemical process which involves the combination of two reactants (usually an alcohol and an acid) to form ester as the end product.  Esters are organic compounds, also found in biological materials, and they have a distinctive, fruity smell.

The process of making ester involves combining a carboxylic acid with an excess of an alcohol while using a tiny amount of a strong acid, like conc. H₂SO₄, as a catalyst. Esterification reaction is a reversible reaction, and the equilibrium constant for the reaction is often close to 1. Numerous strategies can be  employed to raise the yield of ester because it is a reversible reaction .

To know more about functional groups here

https://brainly.com/question/29035899

#SPJ4

The pH of the 19.0 mL sample of 0.455 M aqueous hypochlorous acid solution is approximately 4.49.

To determine the pH at the start of the titration, before any potassium hydroxide has been added, we can use the following steps:

1. Identify the given information:
- Volume of hypochlorous acid (HOCl) solution = 19.0 mL
- Molarity of hypochlorous acid (HOCl) solution = 0.455 M

2. Write the dissociation reaction for hypochlorous acid:
HOCl ⇌ H+ + OCl-

3. Use the Ka expression to calculate the pH:
Ka = [H+][OCl-] / [HOCl]
For hypochlorous acid, Ka = 3.5 x 10^-8

4. Set up an ICE table:
 Initial:      0.455 M      0 M        0 M
 Change:       -x          +x         +x
 Equilibrium: 0.455-x M     x M        x M

5. Substitute the values into the Ka expression:
(3.5 x 10^-8) = (x)(x) / (0.455 - x)

6. Solve for x (assuming x is small compared to 0.455, so 0.455 - x ≈ 0.455):
x = √((3.5 x 10^-8) * 0.455) ≈ 3.22 x 10^-5 M

7. Calculate the pH:
pH = -log[H+] = -log(3.22 x 10^-5) ≈ 4.49

At the start of the titration, before any potassium hydroxide has been added, the pH of the 19.0 mL sample of 0.455 M aqueous hypochlorous acid solution is approximately 4.49.

Learn more about pH here:

brainly.com/question/28133567

#SPJ11

21.167 ml of 0.0861 m KOH are required to titrate 25.0 ml of 0.0729 m HCL to the equivalence point.

Neutralization reaction is defined as a chemical reaction in which an acid and a base reacts with each other. Basically it is explained as when a strong acid reacts with a strong base the resultant salt is neither acidic nor basic in nature which is called neutral. The balanced chemical equation for the neutralization reaction between KOH and HCL  can be written as,

KOH +HCL → KCL + H₂O

The equivalence point of a chemical reaction is defined as the point at which chemically equivalent quantities of reactants of the reaction have been mixed together. For an neutralization reaction the equivalence point is where the moles of acid and the moles of base would neutralize each other as per the chemical reaction.

Moles of KOH is equals to moles of HCL.

Equivalent point of KOH =  0.0729 m * 25.0 ml / 0.0861 m

                                           = 21.167 ml

To learn more about equivalence point

https://brainly.com/question/2496608

#SPJ4

Answer:

A)  44.0 g of CO₂

Explanation:

Avogadro's number is a constant that represents the number of particles in one mole of a substance. It is defined as exactly 6.02214076 × 10²³ particles per mole.

To determine which quantity contains Avogadro's number of molecules, calculate the molar mass of each compound, then use the number of molecules formula to find the number of molecules of the substance.

[tex]\boxed{\begin{minipage}{7 cm}\underline{Number of molecules}\\\\$\dfrac{m}{M} \times 6.02214076 \times 10^{23}$\\\\where:\\\phantom{ww}$\bullet$ $M =$ molar mass.\\ \phantom{ww}$\bullet$ $m =$ mass of a substance (in grams)\\\end{minipage}}[/tex]

[tex]\hrulefill[/tex]

CO₂ is a chemical compound made up of molecules that each have one carbon atom (C) and two oxygen atoms (O₂).

Atomic mass of carbon is 12.011 amu.

Atomic mass of oxygen is 15.999 amu.

Therefore, the molar mass of CO₂ is:

= C + 2O

= 12.011 + 2 × 15.999

= 44.009 g/mol

Given there is 44.0 g of CO₂, the number of molecules of CO₂ is:

[tex]\implies \dfrac{44}{44.009}\times 6.02214076 \times 10^{23}=6.02 \times 10^{23}[/tex]

[tex]\hrulefill[/tex]

NH₃ is a chemical compound made up of molecules that each have one nitrogen atom (N) and three hydrogen atoms (H₃).

Atomic mass of nitrogen is 14.0067 amu.

Atomic mass of hydrogen is 1.00784 amu.

Therefore, the molar mass of NH₃ is:

= N + 3H

= 14.0067 + 3 × 1.00784

= 17.03022 g/mol

Given there is 20.0 g of NH₃, the number of molecules of NH₃ is:

[tex]\implies \dfrac{20}{17.03022}\times 6.02214076 \times 10^{23}=7.07 \times 10^{23}[/tex]

[tex]\hrulefill[/tex]

H₂O is a chemical compound made up of molecules that each have two hydrogen atoms (H₂) and one oxygen atom (O).

Atomic mass of hydrogen is 1.00784 amu.

Atomic mass of oxygen is 15.999 amu.

Therefore, the molar mass of H₂O is:

= 2H + O

= 2 × 1.00784 + 15.999

= 18.01468 g/mol

Given there is 9.01 g of H₂O, the number of molecules of H₂O is:

[tex]\implies \dfrac{9.01}{18.01468}\times 6.02214076 \times 10^{23}=3.01 \times10^{23}[/tex]

[tex]\hrulefill[/tex]

H₂SO₄ is a chemical compound made up of molecules that each have two hydrogen atoms (H₂), one sulphur atom (S) and four oxygen atoms (O).

Atomic mass of hydrogen is 1.00784 amu.

Atomic mass of sulphur is 32.065 amu.

Atomic mass of oxygen is 15.999 amu.

Therefore, the molar mass of H₂SO₄ is:

= 2H + S + 4O

= 2 × 1.00784 + 1 × 32.065 + 4 × 15.999

= 98.07668 g/mol

Given there is 108.0 g of H₂SO₄, the number of molecules of H₂SO₄ is:

[tex]\implies \dfrac{108.0}{98.07668}\times 6.02214076 \times 10^{23}=6.63 \times 10^{23}[/tex]

[tex]\hrulefill[/tex]

44.0 g of CO₂ = 6.02 × 10²³ molecules (3 s.f.)

20.0 g of NH₃ = 7.07 × 10²³ molecules (3 s.f.)

9.01 g of H₂O = 3.01 × 10²³ molecules (3 s.f.)

108.0 g of H₂SO₄ = 6.63 × 10²³ molecules (3 s.f.)

As Avogadro's number of molecules is 6.02 × 10²³ to three significant figures, the quantity that contains the same number of molecules is:

The quantity that contains Avogadro's number of molecules is 44.0 g of CO₂. Therefore, option A is correct.

Avogadro's number is a constant that represents the number of particles (atoms, molecules, ions, etc.) in one mole of a substance. It is equal to 6.022 × 10²³.

CO₂ (carbon dioxide) has a molar mass of approximately 44.01 g/mol. Therefore, 44.0 g of CO₂ corresponds to 1 mole of CO₂, which contains Avogadro's number of molecules.

NH₃ (ammonia) has a molar mass of 17.03 g/mol. Therefore, 20.0 g of NH₃ corresponds to 1.17 moles of NH₃, which is less than Avogadro's number of molecules.

H₂O (water) has a molar mass of 18.02 g/mol. Therefore, 9.01 g of H₂O corresponds to 0.5 moles of H₂O, which is less than Avogadro's number of molecules.

Sulfuric acid has a molar mass of 98.09 g/mol. Therefore, 108.0 g of H₂SO₄ corresponds to 1.1 moles of H₂SO₄, which is less than Avogadro's number of molecules.

To learn more about the Avogadro's number, follow the link:

https://brainly.com/question/16348863

#SPJ6

Ink's RF values are computed. Blue Ink has an average retention factor Rf value of 0.82 in 15 minutes, 0.87 in 30 minutes, and 0.86 in 60 minutes at room temperature.

The ratio of the spot's elevation above the origin to the solvent front's elevation above the origin is the retention factor for a given substance.

The identification and properties of the various compounds can be established using the Rf values. Since more polar chemicals have a larger attraction for the polar solid phase, they will have smaller Rf values.

The retention factor (Rf value) in chromatography is significant because it can be used to anticipate where a specific material would appear on the chromatogram.

To know about retention factor

https://brainly.com/question/30160568

#SPJ4

The text makes clear that Johnson was always devoted to arithmetic by emphasizing her love of counting. a great deal, in size, scope, or importance.

Astronaut aspirants must hold a master's degree, typically in a STEM subject. Along with these requirements, you must successfully complete two years of training and the challenging NASA physical. As a scientist, engineer, or astronomer, you can work in space.

The minimum educational requirements for astronauts include a master's degree and two years of related job experience. A thousand hours of pilot-in-command experience is also an option. A very competitive and selective career path is becoming an astronaut.

To know more about Astronaut visit:

https://brainly.com/question/11244838

#SPJ1