As atmospheric CO2 increases, it traps the heat in the atmosphere; this is called the __________ effect.

Answers

Answer 1

As atmospheric CO2 increases, it traps the heat in the atmosphere; this is called the greenhouse effect.

Answer 2

As atmospheric CO2 increases, it traps the heat in the atmosphere; this is called the greenhouse effect.

What is the Greenhouse Effect?

The Greenhouse Effect refers to the process by which the earth's atmosphere traps the heat from the sun and keeps it from being lost to space. The gases that create this effect are called "greenhouse gases," and they include water vapor, carbon dioxide, methane, nitrous oxide, and ozone. While some of these gases are produced naturally, others are human-made. There are many factors that can affect the level of greenhouse gases in the atmosphere, including industrialization, deforestation, and population growth.

As greenhouse gases accumulate in the atmosphere, they can trap more and more heat, leading to a phenomenon known as "global warming." This can have far-reaching effects on the planet, including rising sea levels, increased frequency and severity of storms, and changes in precipitation patterns.

Learn more about Greenhouse Effect here: https://brainly.com/question/19521661

#SPJ11


Related Questions

__________ deserts occur at higher latitudes than hot deserts.

Answers

Cold deserts occur at higher latitudes than hot deserts.

What are deserts?

A desert is a barren region with a shortage of water, low vegetation cover, and extremely dry air, which is often covered in sand or rocks. Deserts are the driest areas on the planet, receiving little precipitation.The world's deserts are divided into two types: cold deserts and hot deserts. The latitudes at which they exist distinguish between them. Cold deserts are located in higher latitudes, while hot deserts are found in low latitudes. Cold deserts are defined by their temperature, which is similar to that of hot deserts. These are high-elevation areas with low atmospheric pressure and reduced moisture due to the mountains blocking the passage of water.

Learn more about Cold deserts here: https://brainly.com/question/11839824

#SPJ11

as planet mercury formed, temperatures in this region were around 1400k. thus mercury formed out of...

Answers

As the planet Mercury formed, temperatures in this region were around 1400K.

Thus, Mercury formed out of material that had a high melting point. The most abundant elements were metals such as iron (Fe), nickel (Ni), and silicon (Si).

This is because the melting point of these elements is high enough to withstand the high temperature in the region. These elements, particularly iron, dominated the formation of Mercury.

In fact, the planet's density is the second-highest in the solar system, after Earth, which suggests a substantial metallic core.

According to the Giant impact hypothesis, Mercury was formed after a Mars-sized body collided with the early Earth.

The debris from the impact was scattered into space and coalesced into a hot planetesimal which eventually became Mercury.

To learn more about melting point, refer below:

https://brainly.com/question/29578567

#SPJ11

theorize about what landforms are produced as a result of this tectonic boundary. (give examples by referring to the names of these landforms in south america) is there a particular prominent landscape with huge mountains?

Answers

The tectonic boundary between the South American Plate and the Nazca Plate is a convergent boundary. At this boundary, the Nazca Plate is subducted beneath the South American Plate, resulting in the formation of a subduction zone.

As a result, various landforms are produced, including volcanoes, mountains, and oceanic trenches .In South America, one of the most prominent landforms produced by this tectonic boundary is the Andes Mountains.

These mountains stretch along the western edge of South America and are the longest mountain range in the world. They are formed by the collision of the South American Plate and the Nazca Plate.

Additionally, the Nazca Plate is being subducted beneath the South American Plate, resulting in the formation of the Peru-Chile Trench, which is the deepest oceanic trench in the world.

This trench is located off the coast of South America and is over 3,700 miles long. Other landforms produced by this tectonic boundary include volcanoes, such as Cotopaxi in Ecuador and Villarrica in Chile.

For such more question on Nazca Plate:

https://brainly.com/question/14569613

#SPJ11

Materials that can be used to repair damaged weather instruments​

Answers

4 plastic cups of the same color, such as Dixie or Solo cups.
1 plastic cup of a different color.
2 long strips of stiff cardboard.
A pen.
A pencil with an eraser on one end.
A ruler.
A stapler.
A push pin.

Find the differences in height between the peak of Mount Hermon and the Sea of Galilee. (How many feet are they apart?) Note: You do not subtract. Since each figure starts at 0, or sea level, you will find the height above and add it to the distance below. The sum gives you the difference in feet above and below sea level.

766 feet
2,500 feet
10,082 feet
10,700 feet

Answers

The difference in height between the peak of Mount Hermon and the Sea of Galilee is C. 10, 082 feet .

How to find the difference in height ?

The peak of Mount Hermon has an elevation of approximately 9,232 feet above sea level, while the surface level of the Sea of Galilee is approximately 686 feet below sea level.

To find the difference in height between the peak of Mount Hermon and the Sea of Galilee, we need to add the elevation of Mount Hermon to the depth of the Sea of Galilee:

= 9, 232 + 689

= 9, 921 ft

Therefore, the difference in height between the peak of Mount Hermon and the Sea of Galilee is approximately 10, 082 ft from the options.

Find out more on height at https://brainly.com/question/13621018

#SPJ1

where is the safest place, among those listed below, in the 48 contiguous states with respect to earthquake seismic risk?

Answers

The safest place, among those listed below, in the 48 contiguous states with respect to earthquake seismic risk is South Dakota. Thus, Option D is correct.

This is due to its location in the stable interior of the North American Plate, far away from any active plate boundaries or faults.

South Dakota is located in the stable interior of the North American Plate, which means that it is far away from any active plate boundaries or faults. This location makes South Dakota less likely to experience earthquakes compared to other areas located near plate boundaries or faults.

Although earthquakes can occur anywhere, the risk is lower in South Dakota than in other areas such as California or Alaska. Therefore, South Dakota is considered the safest place among those listed below, in the 48 contiguous states with respect to earthquake seismic risk.

Based on this explanation, the correct answer is D.

The complete question:

Where is the safest place, among those listed below, in the 48 contiguous states with respect to earthquake seismic risk?

A. MissouriB. South CarolinaC. All have low seismic riskD. South DakotaE. Maine

Learn more about earthquake seismic risk https://brainly.com/question/13758888

#SPJ11

using the richter scale, an earthquake of magnitude 7.5 releases about how much more energy than one of magnitude 5.5?

Answers

The final answer are earthquake of magnitude 7.5 releases about 3,126,339 joules more energy than one of magnitude 5.5.

The Richter Scale measures the energy of an earthquake, and the magnitude of an earthquake is a measure of the amount of energy released by the earthquake.

The formula for the energy released by an earthquake is E = 10^(3/2M + 9.1), where M is the magnitude of the earthquake.

Using the Richter Scale, an earthquake of magnitude 7.5 releases about how much more energy than one of magnitude 5.5?

We can find the difference in energy by using the formula and plugging in the values:

E(7.5) = 10^(3/2*7.5 + 9.1) = 3,162,277 joules

E(5.5) = 10^(3/2*5.5 + 9.1) = 35,938 joules

The difference in energy released by the two earthquakes can be found by subtracting the two values:

E(7.5) - E(5.5) = 3,162,277 - 35,938 = 3,126,339 joules

Therefore, an earthquake of magnitude 7.5 releases about 3,126,339 joules more energy than one of magnitude 5.5.

To know more about earthquakes refer here:

https://brainly.com/question/29500066#

#SPJ11

what measure do seismologists use to calculate the distance from a seismic receiving station to the epicenter of an earthquake?

Answers

Seismologists use the travel time of the P and S waves to calculate the distance from a seismic receiving station to the epicenter of an earthquake.

Seismology is the study of earthquakes and seismic waves that propagate through the Earth. Seismic waves are the waves that travel through the Earth's layers and cause earthquakes. These waves have different velocities, which allows seismologists to identify the Earth's internal layers and characteristics.A seismic wave is a ground-shaking energy that originates from the focus or hypocenter of an earthquake. They propagate through the Earth's layers and can be recorded by seismographs. The three main types of seismic waves are primary waves (P-waves), secondary waves (S-waves), and surface waves (L-waves).

Seismologists use the travel time of the P and S waves to calculate the distance from a seismic receiving station to the epicenter of an earthquake. The P-waves are faster and therefore reach the station first. The S-waves are slower and take a longer time to arrive at the station. The time difference between the arrival of P and S waves is measured and used to calculate the distance from the station to the epicenter of the earthquake. This is done using a travel-time graph, which provides the distance from the station to the epicenter.

To know more about seismologists  click on below link :

https://brainly.com/question/676287#

#SPJ11

what type of weather product allows meteorologists to visualize the vertical structure of fronts, clouds, and jetstreams?

Answers

The type of weather product that allows meteorologists to visualize the vertical structure of fronts, clouds, and jetstreams is called a Skew-T diagram. Skew-T diagrams are used to identify temperature and wind profiles in the atmosphere, helping meteorologists to make more accurate predictions about upcoming weather conditions. The diagram includes a set of lines that represent the environmental lapse rate, dry adiabatic lapse rate, and the saturation mixing ratio lines.

A Skew-T diagram is a type of graph used in meteorology to display the vertical profile of temperature, dew point, and wind in the atmosphere. It is called a "skew-T" because the temperature axis is skewed or tilted relative to the vertical axis, which allows for a larger temperature range to be displayed on the graph.

Learn more about Climograph: brainly.com/question/14088996

#SPJ11

what would you expect weather to be like on the eastern coast of australia if the western coast of south america were experiencing unusually warm, wet weather?

Answers

If the western coast of South America is experiencing unusually warm and wet weather, you would expect the weather on the eastern coast of Australia to be cooler and drier. This is due to the El Niño-Southern Oscillation (ENSO) phenomenon, which affects global weather patterns.

What is El Niño-Southern Oscillation?

El Niño-Southern Oscillation is a phenomenon that occurs when the ocean temperatures in the equatorial Pacific Ocean change from their normal temperatures. It occurs every three to seven years and lasts between one and two years.

The change in ocean temperature causes the trade winds, which usually blow from east to west, to slow down or reverse direction. When the trade winds slow down or reverse, it causes a buildup of warm water in the eastern Pacific Ocean, leading to El Niño. During an El Niño, the Pacific Ocean's warm surface waters move eastward towards South America, leading to unusually warm and wet weather on the western coast of South America.On the other hand, when the trade winds are stronger than usual, the ocean currents become stronger, leading to colder ocean temperatures in the eastern Pacific Ocean. This is known as La Niña, and it results in cooler and drier weather on the western coast of South America.

What is the effect of El Niño-Southern Oscillation on Australia?

Australia's weather patterns are also affected by El Niño-Southern Oscillation. During an El Niño event, Australia typically experiences drier and warmer weather conditions, especially in the eastern parts of the country. However, during a La Niña event, Australia typically experiences wetter and cooler weather conditions.El Niño-Southern Oscillation is a significant weather phenomenon that affects global weather patterns, including the weather on the eastern coast of Australia. If the western coast of South America is experiencing unusually warm and wet weather, you would expect the weather on the eastern coast of Australia to be cooler and drier.

To know more about El Niño-Southern Oscillation  refer here:

https://brainly.com/question/1870015

#SPJ11

how does the depression form during a caldera eruption? select one: a. the chamber roof collapses as the magma cools and contracts b. the chamber roof collapses after magma is erupted

Answers

During a caldera eruption, the depression forms when the chamber roof collapses as the magma cools and contracts. Option (A) is correct answer.

Caldera eruptions are large volcanic explosions that cause an eruption of volcanic ash and gas. It results from the collapse of a volcanic structure, a volcano or a caldera, often caused by the evacuation of a magma chamber underneath it. Calderas are formed when magma is emptied from the volcano, causing the roof of the chamber to collapse and create a depression.

According to the given options, the depression forms when the chamber roof collapses as the magma cools and contracts. The roof of the magma chamber often cools and contracts after the eruption is over, making it unstable and prone to collapse. As a result, the volcanic structure's roof collapses and forms a depression. Hence, the correct answer is option A.

Learn more about depression caldera eruption

https://brainly.com/question/824390

#SPJ11

where do crevasses form? in the zone of fracture below the zone of fracture at the terminus in icebergs

Answers

Crevasses form in the zone of fracture below the terminus of an iceberg. This occurs when an iceberg starts to move down a valley, sliding on the water's surface and encountering different levels of friction. This causes the ice to break and split, creating a crevasse.

Crevasses can also form due to glacier movements and as a result of stress in the ice. As a glacier slides down a valley, it picks up rocks and sediment, causing an uneven surface. This unevenness increases the friction on the glacier, resulting in crevasses. Additionally, stress from water pressure, the weight of the glacier, or winds and currents can cause crevasses.

Crevasses are deep, jagged cracks in glaciers, ranging from a few centimeters to tens of meters deep. They are often difficult to detect, and can be hazardous to anyone crossing them, as they can easily be hidden beneath snow or ice.

To learn more about Crevasses here:

https://brainly.com/question/9657443#

#SPJ11

what is the name of the accessory force helping to drive plate movement that results from a dense oceanic plate subducting?

Answers

The accessory force that helps to drive plate movement resulting from a dense oceanic plate subducting is known as the slab pull force. Slab pull is a tectonic process in which the dense oceanic lithosphere sinks into the mantle at a convergent plate boundary. This force is the most important driver of plate movement, accounting for up to 80% of the total force.

As the slab sinks, it pulls on the rest of the lithosphere, resulting in the displacement of other plates. The slab pull force is especially important in subduction zones, where one plate dives beneath another. Subduction zones are where some of the Earth's most violent geological processes, such as mountain building and volcanic eruptions, take place.

Slab pull is caused by the large gravitational pull of a dense plate as it descends into the asthenosphere. The greater the density of the plate, the stronger the slab pull. Additionally, the subducting plate acts like a wedge, pushing the other plate upwards as it sinks.

Slab pull plays an important role in the movement of plates, and its importance can be seen in plate tectonics. Without slab pull, plate motion would be slower and more variable.

To learn more about Slab pull here:

https://brainly.com/question/7350739#

#SPJ11

small islands that are geographically isolated from the mainland and have no neighboring islands are colonized through what means of dispersal?

Answers

Small islands that are geographically isolated from the mainland and have no neighboring islands are colonized through the wind or water dispersal mechanism.

The mechanism of water dispersal is a method in which seeds or spores are transported by water. During heavy rains, floods, or tsunamis, many plants' seeds are washed away by the flowing water and ultimately carried to new habitats by the water's currents.

On the other hand, the mechanism of wind dispersal is a means by which small and light seeds or spores are transported by the wind. Wind-dispersed seeds are carried by the wind over long distances and then eventually settle in new places, germinating and developing into new populations.

Animals are often responsible for transporting the seeds of plants from one location to another. They transport seeds in their digestive systems, on their fur, and in mud and dust that accumulates on their bodies.

As a result, even small islands that are geographically isolated from the mainland and have no neighboring islands are colonized over time by different means of dispersal, including wind, water, and animal dispersal.

To know more about Small islands, click on the link below:

https://brainly.com/question/14272243#

#SPJ11

what would you look for as evidence that a rock layer formed from materials deposited by ancient turbidity currents?

Answers

Answer:

repeated sequences of graded bedding that begin as coarse material and become finer upward

Explanation:

Evidence that a rock layer was formed from materials deposited by ancient turbidity currents include sedimentary structures such as ripple marks, graded bedding, and load casts. Ripple marks are wave-like undulations formed by currents. Graded bedding occurs when finer-grained material is deposited on top of coarser-grained material. Load casts are hollow molds that form when a current carries material and deposits it.

Other evidence of turbidity current deposits include erosional contact points, angular cross beds, and slump structures. Erosional contact points are found when a turbidity current is so powerful it cuts through underlying strata. Angular cross beds indicate rapid deposition by a fast-moving current.

Know more about rock layer here:

https://brainly.com/question/315862

#SPJ11

how might having a lot of oil affect southwest asia? list at least three ways you think this resource might affect the people and places in this region.

Answers

Southwest Asia, also known as the Middle East, is a region that is rich in oil reserves. Here are three examples:

Economic developmentPolitical stabilityEnvironmental challengesWhat is the oil affect?

The abundance of this resource has significant impacts on the people and places in the region in several ways.

Economic development: The oil industry is a crucial driver of economic development in Southwest Asia. The oil reserves generate a considerable amount of revenue for the countries in the region, which can be used to fund infrastructure projects, social programs, and other economic development initiatives. For instance, countries like Saudi Arabia and the United Arab Emirates have used their oil revenues to build modern cities and develop their economies.

Political stability: Oil has also played a significant role in shaping the political landscape of Southwest Asia. In some countries, control of oil resources has been a source of conflict and instability. However, in other countries, oil wealth has been used to maintain political stability.

Lastly, Environmental challenges: The oil industry can also have negative environmental impacts on the region. Oil spills, air pollution, and water pollution are all potential hazards associated with oil production and transportation.

Learn more about Oil from

https://brainly.com/question/25614315

#SPJ1

in the northern hemispheres, winds spiraling counterclockwise into a low pressure area are question 60 options: anticyclonic. cyclonic. geostrophic. meridional.

Answers

The winds spiraling counterclockwise into a low pressure area are called cyclonic.

What is cyclonic flow?A cyclonic flow is a term used in atmospheric physics to describe fluid flow that rotates clockwise in the Southern Hemisphere and counterclockwise in the Northern Hemisphere. Cyclonic flow is the opposite of anticyclonic flow, which is characterized by outward motion around a high-pressure region.

A low-pressure region, also known as a cyclone, causes a spiraling flow of air that rotates counterclockwise in the Northern Hemisphere and clockwise in the Southern Hemisphere. Cyclones are associated with a variety of atmospheric disturbances, such as tropical storms, hurricanes, and tornadoes.

Hence the correct answer is cyclonic.

To know more about cyclonic refer here:

https://brainly.com/question/31188331

#SPJ11

the annual cycle of prevailing weather conditions at a given place based on long-term contitions is known as: weather. a trend cyclone climate global warming

Answers

The annual cycle of prevailing weather conditions at a given place based on long-term conditions is known as climate.

The term weather is used to refer to short-term conditions such as precipitation, temperature, and wind. The climate of a region is determined by a variety of factors, including latitude, elevation, prevailing winds, and the presence of land and water bodies.

It can be classified into different categories based on temperature, precipitation, and other factors. In general, climate change refers to long-term changes in weather patterns and temperature around the world, while global warming refers specifically to the gradual warming of the planet's surface due to increased levels of greenhouse gases in the atmosphere. Cyclones, on the other hand, are severe tropical storms that can cause significant damage and loss of life. Trends are statistical measurements of changes over time. The correct answer is "climate."

To know more about prevailing weather refer here:

https://brainly.com/question/17922964

#SPJ11

short term changes in atmospheric variables such as temperature, wind, precipitation, and barometric pressure over a given area and period of days are an example of:

Answers

The short term changes in atmospheric variables such as temperature, wind, precipitation, and barometric pressure over a given area and period of days is an example of weather patterns.

Weather patterns are the result of large scale movement of air masses and their interaction with other meteorological factors. They determine the type of weather, like sunny days or rainy days, that a given area experiences over a period of days.

Weather patterns are formed when areas of high and low pressure interact. Air moves from areas of high pressure to areas of low pressure, creating an airflow pattern. The temperature, wind, precipitation, and barometric pressure all are affected by this airflow pattern.

Changes in these atmospheric variables depend on the strength of the pressure system and its movement. When the pressure system is strong and stationary, there is little change in the weather pattern. However, when the pressure system is weak and moving, the atmospheric variables will be more volatile.

Learn more about weather patterns here:

https://brainly.com/question/22027718

#SPJ11

What are the 5 stages of solar system formation?

Answers

The 5 stages of solar system formation are Solar Nebula, Protostar and Protoplanetary Disk, Planetesimals, Protoplanets and  Solar System.

The 5 stages of solar system formation are:

1. Solar Nebula: A cloud of dust and gas, called the solar nebula, begins to collapse due to gravitational forces. As it collapses, the material starts to spin and flatten into a disk shape.

2. Protostar and Protoplanetary Disk: The material in the center of the disk becomes denser, forming a protostar. Meanwhile, the remaining material in the disk starts to clump together, creating a protoplanetary disk around the protostar.

3. Planetesimals: Within the protoplanetary disk, solid particles collide and stick together, forming larger bodies called planetesimals. These planetesimals continue to grow as they collect more material from the disk.

4. Protoplanets: As planetesimals grow and interact, some merge through collisions, eventually forming larger bodies known as protoplanets. Protoplanets continue to evolve and differentiate, developing into the planets we observe in our solar system today.

5. Solar System: Over time, the protostar at the center of the system becomes a fully-fledged star (our Sun), while the remaining protoplanetary disk material is cleared out, leaving the planets, moons, asteroids, and other bodies orbiting the star. This marks the formation of the solar system.

For more about solar system:

https://brainly.com/question/12075871

#SPJ11

the melting of ice sheets from land masses is of greater concern to scientists than the melting of icebergs because

Answers

The melting of ice sheets from land masses is of greater concern to scientists than the melting of icebergs because the excess water flows into the oceans and causes the sea levels to rise which have catastrophic consequences on coastal populations and ecosystems.

Ice sheets are larger and more widespread than icebergs, making them more likely to impact global sea levels. Ice sheets are made of freshwater that has been frozen for thousands of years and they are part of the Greenland and Antarctic ice caps. As they melt, the excess water flows into the oceans and causes the sea levels to rise. This can have catastrophic consequences on coastal populations and ecosystems. In contrast, icebergs are smaller and more localized. Melting of icebergs does not significantly contribute to global sea levels, but it does affect the balance of fresh and salt water in the oceans.

Overall, melting of ice sheets has the greater potential to cause widespread, long-term damage. Melting of ice sheets from land masses can cause disruption to ecosystems, sea level rise, and coastal flooding. On the other hand, melting of icebergs only impacts the salinity of the ocean, which has less far-reaching implications.

For more such questions on Ice sheets & icebergs.

https://brainly.com/question/29644993#

#SPJ11

explain the importance of the water molecule's shape and polarity in terms of earth's ability to sustain life britannica

Answers

The shape and polarity of water molecules is key for Earth’s ability to sustain life. Hydrogen bonding allows for many essential processes, from surface tension in aquatic organisms to the formation of more complex molecules. Hydrophobic interactions are also necessary for the formation of large biological structures, making the polarity of water key for many biochemical reactions.

The hydrogen bonds between water molecules form a lattice-like structure, which gives them the ability to trap other molecules and form micelles. This is essential for many biochemical processes, as it allows enzymes to bind to their substrates and facilitate chemical reactions.

The surface tension of water is due to hydrogen bonding, and this is important for many aquatic organisms. It also enables surface tension driven movements, like transpiration in plants, which are essential for transpiration and the water cycle.

The polarity of water is also key for many biochemical reactions, as it allows for the formation of hydrogen bonds between organic molecules. This allows them to interact and form larger, more complex structures that are necessary for life. Hydrogen bonding is also important for hydrophobic interactions, which allow hydrophobic molecules to form non-polar regions in water and form structures that are necessary for biological processes.

Know more about surface tension here:

https://brainly.com/question/11348644

#SPJ11

explain how gravity affects the movement of plates with two types of crust when the plates collide and how density relates to this effect.

Answers

Gravity pulls the denser plate beneath the less dense one when two plates collide. The greater the density of a plate, the more likely it is to be pulled below the other plate by gravity.

Gravity affects the movement of plates when two plates with different types of crust collide. When two plates of different densities meet, the denser plate is pushed beneath the less dense plate. This process is known as subduction and it creates mountains, volcanoes and trenches on the Earth's surface.

The density of a plate affects how it is deformed when it collides with another plate. For example, a denser plate will resist being pushed underneath the other plate and can instead cause the other plate to buckle. This buckling can create mountains or earthquakes. On the other hand, a less dense plate can be easily subducted, resulting in the formation of a trench.

When two plates with the same density collide, the plates slide horizontally past each other, forming faults. This can also cause earthquakes when the two plates become locked and built up stress is released.

Overall, gravity affects the movement of plates when they collide and the density of the plates plays a major role in the deformation that occurs. Oceanic and continental plates frequently collide, with the denser oceanic plate being pushed beneath the less dense continental plate. This causes deep-sea trenches to form on the oceanic plate's surface. The greater the density of a plate, the more likely it is to be pulled below the other plate by gravity. Because oceanic plates are denser than continental plates, they are frequently pushed beneath them.

For more such questions on Gravity.

https://brainly.com/question/1479537#

#SPJ11

10,000 cy of gravel have been hauled to a project and put into a conical pile. what diameter of the pile do you expect?

Answers

The diameter of a conical pile of 10,000 cy of gravel depends on several factors, such as the angle of repose of the gravel and the particle size of the gravel. Generally, the higher the angle of repose, the larger the diameter of the pile. The particle size of the gravel will also affect the size of the pile; a pile of smaller particles of gravel will form a larger pile than a pile of larger particles.

To estimate the diameter of the conical pile, the angle of repose of the gravel must be known. This can be determined through laboratory tests or by consulting existing literature. If the angle of repose is known, the diameter of the conical pile can be estimated using the following formula:

Diameter = Height * Tan(Angle of Repose).

Thus, if the height of the pile is known, the diameter can be determined by multiplying the height by the tangent of the angle of repose.

In conclusion, the diameter of a conical pile of 10,000 cy of gravel can be estimated by knowing the height of the pile and the angle of repose of the gravel. The angle of repose can be determined through laboratory tests or by consulting existing literature, and the diameter can be estimated using the formula Diameter = Height * Tan(Angle of Repose).

To learn more about gravel here:

https://brainly.com/question/29576396#

#SPJ11

one part of the coterminous u.s. which appears least likely to be impacted by enso is the states. a. northeastern b. southwestern c. northwestern

Answers

One part of the contiguous U.S. which appears least likely to be impacted by ENSO is the northwestern states.

What is ENSO?

ENSO (El Niño-Southern Oscillation) is an irregularly recurring climate pattern, typically occurring every two to seven years, which is the combination of the El Niño and La Niña phases in a way that affects the atmosphere and ocean.

Effects of ENSO:

The El Niño and La Niña phases of ENSO can have a significant impact on climate in various regions across the globe, including the contiguous United States. It can lead to changes in temperature, rainfall, and weather patterns.

How does ENSO affect the northwestern states?

The northwestern states of the contiguous U.S. which include Montana, Idaho, Washington, Oregon, and Wyoming, appear to be the least impacted by ENSO.

They tend to have less variability in temperature and precipitation as compared to the rest of the country. However, there can still be some effects of ENSO on these regions, such as a slightly increased likelihood of drier and warmer conditions during El Niño years.

To know more about ENSO, refer here:

https://brainly.com/question/6560924

#SPJ11

New snow on a glacier in the first year, which is called __________ snow, is very granular in nature and gets partially melted, or undergoes sublimation or evaporation.

Answers

Answer:

New snow on a glacier in the first year, which is called névé snow, is very granular in nature and gets partially melted, or undergoes sublimation or evaporation. Névé snow is typically formed by the compaction and recrystallization of snowfall over the course of a single winter season, and it is an intermediate stage in the transformation of snow into glacial ice. As the névé snow becomes more compacted over time, it eventually becomes firn and then glacial ice.

New snow on a glacier in the first year, which is called neve snow, is very granular in nature and gets partially melted, or undergoes sublimation or evaporation.

What is neve snow?

Neve snow is the name given to granular snow that has survived a full year of snowfall, also known as firn snow. It's often referred to as snow that's at the base of a glacier, and it typically appears during the snow accumulation period. The neve snow is partially melted, or undergoes sublimation or evaporation. It is composed of hexagonal snowflakes, also known as "diamond dust" because they sparkle in the sun.The snow turns into a more granular type of ice that looks more like rough, irregular sugar crystals than the characteristic hexagonal snowflakes after being partially melted and refrozen several times. This type of snow is referred to as firn, and it has a high density due to the amount of compressed air trapped between the ice crystals.

Learn more about neve snow here: https://brainly.com/question/26706545

#SPJ11

in the past 50 years, the global hydrological environment has experienced great change due to .

Answers

In the past 50 years, the global hydrological environment has experienced great change due to human activities. Human activities that have impacted the global hydrological environment include urbanization, deforestation, agricultural practices, industrial activities, and the burning of fossil fuels.

There have been significant changes in the global hydrological environment over the past 50 years, and the majority of these changes can be attributed to human activities. These activities have had a significant impact on the hydrological cycle, including changes in precipitation patterns, changes in the distribution and availability of water resources, changes in the quality of water resources, and changes in the occurrence and severity of floods and droughts. Urbanization has led to increased impervious surfaces, which has resulted in an increase in runoff and a decrease in infiltration.

Deforestation has led to a decrease in evapotranspiration, which has resulted in a decrease in precipitation. Agricultural practices have led to an increase in irrigation, which has resulted in a decrease in the availability of water resources. Industrial activities have led to an increase in the pollution of water resources, which has resulted in a decrease in the quality of water resources.

to know more about global hydrological environment  refer here

https://brainly.com/question/2500154#

#SPJ11

At what time of day is a shadow the shortest?

Answers

During solar noon, when the sun is at its highest position in the sky, the shadow is at its shortest.

This occurs usually about noon, however, it may differ somewhat depending on where you are and the season. The sun's rays are entering the scene at a more direct angle, which shortens the shadow's length.

Longer shadows are produced by variations in the sun's beams' angle when the sun rises or sets. The height of the object will also affect how long the shadow is, with taller objects casting longer shadows than shorter ones. The length of the shadow is the smallest overall when the sun is directly overhead.

Learn more about the solar noon at

https://brainly.com/question/31043299

#SPJ4

which of the following primary pressure areas are produced by thermal factors, rather than dynamic factors? question 62 options: equatorial low and polar high equatorial low and bermuda high aleutian low and icelandic low subtropical high and subpolar low

Answers

The answer is: Equatorial low and polar high.


These two areas are primarily influenced by temperature differences, which are a type of thermal factor, rather than dynamic factors such as the movement of air masses.

while excavating you discover partially intact bone awl (bone pin). what chronometric dating method would you use to discover its age?

Answers

Radiocarbon dating would be the best chronometric dating method to discover the age of a bone awl. Radiocarbon dating is a method of estimating the age of organic materials, such as bone, by measuring the amount of radioactive carbon-14 remaining in the sample.

This method is based on the fact that the atmosphere contains a fixed amount of carbon-14, which is absorbed by plants and animals during their lifetime.

After death, the carbon-14 decays at a constant rate, which can be used to calculate the age of the sample. In addition, the accuracy of radiocarbon dating has been improved by developments in radiometric dating, such as accelerator mass spectrometry, which allows for more precise measurements of the amount of carbon-14 remaining in a sample. By measuring the amount of carbon-14 remaining in a bone awl, it is possible to estimate its age.

Know more about Radiocarbon here

https://brainly.com/question/1035017#

#SPJ11

Other Questions
How have humans enabled emerging diseases to spread more rapidly? when rotating the platform, the hanging mass should be removed from the platform. question 2 options: true false in nasa's a short tour of the cryosphere, why is the snow of the rockies important to the midwest united states? group of answer choices -15>-11+w solve inequality for W what is a chronological account of detailed notes written by a probation or parole officer and organized by date, about any client contact and/or case information that becomes a permanent part of the offender's case file? golden shiner and mud minnows lay their eggs on chara (green algae). in which pond would you find them? which of the following relationships about a coil are true? check all that apply. which of the following relationships about a coil are true?check all that apply. the induced emf is proportional to the resistance of the coil. the induced emf is proportional to the time derivative of the current in the coil. the induced emf is proportional to the self-inductance of the coil. the induced emf is proportional to the current in the coil. in the last week of december, the local retail store ran an ad to announce they were selling all their holiday decor at half price. this advertisement is an example of abc co. manufactures textiles. among abc's year 1 manufacturing costs were the following salaries and wages: textile machine operators $120,000 factory supervisor $45,000 custodial staff $30,000 what was the amount of abc's year 1 direct labor? using a field salesforce to perform sales-generating activities and a telemarketing salesforce to perform account servicing activities is an example of you work as the it security administrator for a small corporate network. you recently set up the remote access vpn feature on your network security appliance to provide you and your fellow administrators with secure access to your network. you are currently at home and would like to connect your ipad to the vpn. your ipad is connected to your home wireless network. in this lab, your task is to: add an ipsec vpn connection using the following values: parameter value description corpnet vpn server 198.28.56.34 account mbrown secret asdf1234$ turn on the vpn. verify that a connection is established. the password for mbrown is l3tm31nn0w (0 I need help with dis math . Calculate the slope of the line that passes through (3, 2) and (-7, 4). Arable land is used to grow crops and feed livestock.TrueFalse suppose that nominal gdp did not change in 2011, and real gdp increased, relative to the year 2010. it can be concluded that: H 18. Of the 650 students at Westmoreland Junior High, 4 will receive a perfect attendance award. How many students will receive the award? which of the following are semiconductor elements? a. iron and copper b. boron and gallium c. silicon and germanium d. arsenic and phosphorou determine what type of transformation is represented the nurse has entered the room of a newly admitted client who immediately reports feeling short of breath. after identifying this as the client's problem, the nurse uses the process of scientific problem solving. place the steps in the order the nurse would follow. use all options. what happens if an appellate court rules that a trial court did not correctly apply the law in a case? psci 2306