As a lead-acid battery is discharged, the pH of the solution in the battery decreases.Additionally, the voltage of the cell decreases as the battery discharges.
As a lead-acid battery is discharged, the pH of the solution in the battery decreases. This is because the overall reaction of the battery results in the production of hydrogen ions (H+) at the negative electrode and the consumption of hydrogen ions at the positive electrode. The accumulation of H+ ions at the negative electrode causes the pH to decrease.
Additionally, the voltage of the cell decreases as the battery discharges. This is because the availability of reactants decreases as the reaction progresses, resulting in a decrease in the driving force for the reaction. The voltage of a lead-acid battery is directly proportional to the concentration of sulfuric acid (H2SO4) in the electrolyte. As the battery discharges, the concentration of sulfuric acid decreases, leading to a decrease in voltage.
To know more about lead acid battery go through:-
https://brainly.com/question/29643320
#SPJ4
a. 5.95g of cobalt (II) carbonate were added to 40 mL of hydrochloric acid with a concentration of 2.0M
b. Calculate the maximum yield of cobalt (II) Chloride-6- water and show that the cobalt (II) carbonate was in excess.
1. CoCO3 + 2 HCl → COCl2 + CO2 + H2O
2. COCl2 + 6H2O →COCl2∙ 6H2O
ii. Maximum yield:
iii. Number of moles of HCl used:
iv. Number of moles CoCl2 formed:
v. Number of moles COCl2∙ 6H2O formed:
vi. Mass of one mole of COCl2∙ 6H2O =238g
vii. Maximum yield of COCl2∙ 6H2O =
viii. Showing that cobalt (II) carbonate is in excess: ix. Number of moles of HCl used:
x. Mass of one mole of CoCO3= 119g
xi. Number of moles of CoCO3 in 5.95 g of cobalt (II) carbonate=
xii. Explain how these calculations show that cobalt (II) carbonate is in excess.
i. Balanced chemical equation: [tex]\rm CoCO_3 + 2 HCl \rightarrow COCl_2 + CO_2 + H_2O[/tex]
[tex]\rm COCl_2 + 6H_2O \rightarrow COCl_2\cdot 6H_2O[/tex]
How are chemical equations and mole determined?ii. Highest yield:
To determine the limiting reactant, we must first determine the maximum production of [tex]\rm COCl_26H_2O[/tex]. By counting the moles of HCl and [tex]\rm CoCO_3[/tex] utilised and comparing them to the stoichiometric coefficients in the balanced chemical equation, this can be accomplished.
Several moles of HCl are used:
[tex]\rm n(HCl) = C \times V = 2.0\ M \times 0.040\ L = 0.080\ mol[/tex]
Several moles of [tex]\rm CoCO_3[/tex] were used:
[tex]\rm n(CoCO_3) = m/M = 5.95\ g / 118.94\ g/mol = 0.050\ mol[/tex]
We can deduce that the mole ratio of HCl to [tex]\rm CoCO_3[/tex] in the balanced equation is 2:1. This means that more HCl than [tex]\rm CoCO_3[/tex] was used, at a rate of moles per litre. [tex]\rm CoCO_3[/tex] is the limiting reactant, according to this.
iii. Quantity of [tex]\rm CoCl_2[/tex] formed:
One mole of [tex]\rm CoCO_3[/tex] reacts to create one mole of [tex]\rm CoCl_2[/tex], as shown by the equation's balanced version. As a result, 0.050 moles of [tex]\rm CoCl_2[/tex] were also produced.
iv. The quantity of [tex]\rm COCl_26H_2O[/tex] that was produced:
One mole of [tex]\rm CoCl_2[/tex] reacts to produce one mole of [tex]\rm COCl_26H_2O[/tex], as shown by the equation's balanced version. As a result, 0.050 moles of [tex]\rm COCl_26H_2O[/tex] were also produced.
v. Mass of one mole of [tex]\rm COCl_2\cdot 6H_2O[/tex] = 238g
vi. Maximum yield off [tex]\rm COCl_2\cdot 6H_2O[/tex]:
Maximum yield = number of moles of f [tex]\rm COCl_2\cdot 6H_2O[/tex] × molar mass of f [tex]\rm COCl_2\cdot 6H_2O[/tex]
Maximum yield = 0.050 mol × 238 g/mol = 11.9 g
viii. Showing that cobalt (II) carbonate is in excess:
To show that [tex]\rm CoCO3[/tex] is in excess, we need to calculate the theoretical yield of f [tex]\rm COCl_2\cdot 6H_2O[/tex] based on the number of moles of HCl used.
ix. A number of moles of HCl used:
[tex]\rm n(HCl) = C \times V = 2.0\ M \times 0.040\ L = 0.080\ mol[/tex]
By looking at the equation in its entirety, we can see that 1 mole of [tex]\rm CoCO_3[/tex] and 2 moles of HCl combine to generate 1 mole of [tex]\rm CoCl_2[/tex]. As a result, the greatest amount of [tex]\rm CoCl_2[/tex] that may be produced using the HCl utilised is:
1 mol [tex]\rm CoCl_2/2[/tex] mol HCl 0.080 mol HCl = 0.040 mol [tex]\rm CoCl_2[/tex]
The actual amount of [tex]\rm CoCl_2[/tex] generated is 0.050 mol, exceeding the maximum amount that may be created using the HCl utilised. This indicates an overabundance of [tex]\rm CoCO_3[/tex].
xi. Number of moles of [tex]\rm CoCO_3[/tex] in 5.95 g of cobalt (II) carbonate:
[tex]\rm n(CoCO_3)[/tex] = m/M = 5.95 g / 118.94 g/mol = 0.050 mol
to know more about concentration here:
brainly.com/question/10725862
#SPJ1
The solubility of a gas is 0.584 g/L at a pressure of 109 kPa. What is the solubility of the gas if the pressure is increased to 85 kPa, given that the temperature is held constant?
The solubility of the gas at a pressure of 85 kPa is 0.456 g/L.
What occurs to gas solubility as pressure increases?The relationship between pressure and a gas's solubility is straightforward. That is, it gets bigger as the strain gets bigger.
The combined gas law can be used to resolve this issue and says that:
(P1V1)/T1 = (P2V2)/T2
To solve for V2, which stands for the new volume at the reduced pressure, we can rearrange this equation as follows:
V2 = (P1V1T2)/(P2T1)
Since the temperature is held constant, T1 = T2, and this simplifies to:
V2 = (P1V1)/P2
Solubility2 = (Solubility1 x P2) / P1
where the solubility at greater pressure is denoted by Solubility1.
With numbers from the problem substituted, we obtain:
Solubility2 = (0.584 g/L x 85 kPa) / 109 kPa
Simplifying this expression, we get:
Solubility2 = 0.456 g/L.
To know more about solubility visit:-
https://brainly.com/question/28170449
#SPJ1
Our atmosphere is made up of 78% N2, 21% O2, and 1% other gases. What is the partial pressure of N2 when atmospheric pressure is 0.980 atm?
Answer: 0.7644 atm
Explanation:
Given,
Total atmospheric pressure= 0.980atm
Percentage of N₂=78%=0.78
Partial Pressure of N₂=Total atmospheric pressure*Percentage of N₂
=0.980 atm × 0.78
=0.7644 atm
What is required to calculate the equilibrium constant of a chemical reaction?
Responses
the concentration of products and reactants
the change in entropy of the reaction
the energy of the reaction
the change in temperature of the reaction
Answer:
The concentration of products and reactants is required to calculate the equilibrium constant of a chemical reaction.
plsss helppp asapppp
Answer:
well u can see clearly that C got the most bonds
What is the balanced equation for
Solid calcium fluoride decomposes to form calcium metal and fluorine gas?
The balanced equation for the given reaction is:
CaF2(s) → Ca(s) + F2(g)
This equation indicates that one molecule of calcium fluoride (CaF2) decomposes into one molecule of calcium (Ca) and one molecule of fluorine gas (F2). The equation is balanced because the number of atoms of each element is equal on both sides of the equation.
How many moles are in 9.35 x 10^24 molecules of
molecular hydrogen?
Answer:
One mole of a substance contains 6.022 x 10^23 particles (Avogadro's number).
Therefore, to find the number of moles in 9.35 x 10^24 molecules of molecular hydrogen, we need to divide this number by Avogadro's number:
moles = (9.35 x 10^24 molecules) / (6.022 x 10^23 molecules/mol)
moles = 15.5 mol (rounded to two decimal places)
Therefore, there are 15.5 moles in 9.35 x 10^24 molecules of molecular hydrogen.
in a sample of 'a' found today, there are 128,000 atoms. if the halflife of 'a' is 5,000 years, in what year will the sample have 8,000 atoms?
In the year 20,002.5, the sample of 'a' will have 8,000 atoms, after passing through approximately 4 half-lives of 5,000 years each.
To solve the problem, we can use the equation for half-life:
T = (ln(N₀/N))/λ
where T is the half-life, N₀ is the initial number of atoms, N is the final number of atoms, and λ is the decay constant. Rearranging the equation to solve for N gives:
N = N₀e^(-λT)
We can use this equation to solve for the year when the sample will have 8,000 atoms.
Let's plug in the values we know:
N₀ = 128,000N = 8,000T = 5,000 years
λ = ln(2)/THalf-life (T) is 5,000 years.
Thus, decay constant λ is given by:
λ = ln(2)/T= ln(2)/5000= 0.00013862789.
Now we can plug in the values and solve for the year:N = N₀e^(-λT)8000 = 128,000e^(-0.00013862789T)
Divide both sides by 128,000:0.0625 = e^(-0.00013862789T)Take the natural logarithm of both sides:-
2.77259 = -0.00013862789TT = 20,002.5 years ago.
for more such questions on atoms :
https://brainly.com/question/17545314
#SPJ11
how many moles of albr3 will be produced if we start with 4 moles br2?
When starting with 4 moles of Br2, 8/3 moles of AlBr3 will be produced.
To obtain the answer, we'll use the following chemical equation:2Al(s) + 3Br2(l) → 2AlBr3(s)To calculate the number of moles of AlBr3 formed, we must first determine the limiting reagent.
The limiting reagent is the substance that runs out first and prevents the reaction from proceeding.
The reactant that produces the smallest number of moles of the product is typically the limiting reagent in problems like this.
So, let's calculate the number of moles of AlBr3 that can be produced from each reactant when 4 moles of Br2 are used:
For 4 moles of Br2:2AlBr3(s) will be produced from 3 mol of Br24 mol of Br2 will produce (2 mol AlBr3/3 mol Br2) × 4 mol Br2 = 8/3 mol AlBr3
Therefore, when starting with 4 moles of Br2, 8/3 moles of AlBr3 will be produced.
To know more about moles refer to-
brainly.com/question/26416088#
#SPJ11
what is the ph of the resulting solution if 25 ml of 0.432 m methylamine, ch3nh2, is added to 15 ml of 0.234 m hcl? assume that the volumes of the solutions are additive. ka
The pH of the resulting solution is 10.89.
One may determine the pH of a solution by knowing the hydrogen ion concentration in molarity (M). The pOH value, which may also be used to determine the pH of a solution, is influenced by the concentration of the h+ ions. The pH of the mixture is 10.89.
Anything that has a pH of 7.0 or less is acidic, while everything that has a pH of 7.0 or more is alkaline or basic. The pH scale, which goes from 0 (very acidic) to 14 (very basic/alkaline), contains all pH values for typical materials.
volume1 = 25 ml = 25\1000 = 0.025lit
volume 2= 15ml = 15/1000 = 0.015lit
[tex]n_{CH_{3}NH_{2} } = 0.432M*0.025Lit[/tex]
= 0.0108 moles
[tex]n_{HCL} = 0.234M*0.015Lit[/tex]
= 0.00351moles
[tex]CH_{3} NH_{2} + H_{3} O[/tex] ⇆ [tex]CH_{3} N^{+}H _{3} +H_{2} O[/tex]
Initial charge of [tex]CH_{3} NH_{2}[/tex] = 0.0108-0.00351 = 0.00729
Initial charge of [tex]CH_{3} N^{+}H _{3}[/tex] = 0+0.00351
[tex]pH= 14-(p^{xb} +log\frac{[CH_{3}N^{+} H_{3}] }{[CH_{3}NH_{2} ]} )[/tex]
[tex]= 14-(3.43+Log(\frac{0.00351}{0.00729} )[/tex]
= 10.89
The pH of the resulting solution is 10.89
Learn more about pH here:
https://brainly.com/question/17329058
#SPJ4
if air is 20.9% oxygen by volume, how many liters of air are needed to complete the combustion of 25.0L of octane vapor at STP?
Answer:
1,495.11 L volume of air will be required for the complete combustion of octane vapors of 25 L.
the production of iron and carbon dioxide from iron 3 oxide and carbon monoxide is an exothermic reaction. how many kiljoules of heat are produced when 3.40 mol fe2o3 reacts with an excess of co
the reaction releases 1,066.3 kJ of heat.
The balanced chemical equation for the reaction between Fe2O3 and CO to produce Fe and CO2 is:
Fe2O3 + 3CO → 2Fe + 3CO2
According to the equation, 1 mole of Fe2O3 reacts with 3 moles of CO to produce 2 moles of Fe and 3 moles of CO2.
Since there is an excess of CO, we can assume that all of the Fe2O3 will react completely. Therefore, the number of moles of CO needed can be calculated as:
3.40 mol Fe2O3 × (3 mol CO / 1 mol Fe2O3) = 10.2 mol CO
So, 10.2 moles of CO are needed to react completely with 3.40 moles of Fe2O3.
The heat released by the reaction can be calculated using the standard enthalpy of formation (ΔHf°) values for the compounds involved in the reaction. The ΔHf° values for Fe2O3, CO, Fe, and CO2 are -824.2 kJ/mol, -110.5 kJ/mol, 0 kJ/mol, and -393.5 kJ/mol, respectively.
To calculate the heat released, we can use the following formula:
ΔH = ΣnΔHf°(products) - ΣnΔHf°(reactants)
where ΣnΔHf° is the sum of the standard enthalpies of formation for the products and reactants, and n is the stoichiometric coefficient.
Plugging in the values, we get:
ΔH = (2 mol × -393.5 kJ/mol) + (3 mol × 0 kJ/mol) - (1 mol × -824.2 kJ/mol) - (3 mol × -110.5 kJ/mol)
= -1,066.3 kJ
Therefore, the reaction releases 1,066.3 kJ of heat.
To know more about heat go through:-
https://brainly.com/question/934320
#SPJ4
what is the enthalpy change when a 6.00 g-sample of table sugar (c12h22o11) is oxidized? c12h22o11(s) 12 o2(g) 12 co2(g) 11 h2o(l) h
The enthalpy change for the combustion of 6.00 g of table sugar is -268,228 kJ/mol.
The enthalpy change for the combustion of one mole of table sugar (C12H22O11) can be calculated using the standard enthalpies of the formation of the reactants and products.
The balanced chemical equation for the combustion of table sugar is:
C12H22O11(s) + 12 O2(g) → 12 CO2(g) + 11 H2O(l)
The standard enthalpies of formation of C12H22O11(s), CO2(g), and H2O(l) are -1274.9 kJ/mol, -393.5 kJ/mol, and -285.8 kJ/mol, respectively. The standard enthalpy of the formation of O2(g) is 0 kJ/mol.
To calculate the enthalpy change for the combustion of 6.00 g of table sugar, we need to convert the mass to moles:
moles of C12H22O11 = 6.00 g / 342.3 g/mol = 0.0175 mol
Using the stoichiometric coefficients in the balanced equation, we can determine that 12 moles of O2 are required to completely react with 1 mole of C12H22O11. Therefore, the number of moles of O2 required to react with 0.0175 mol of C12H22O11 is:
moles of O2 = 12 × 0.0175 mol = 0.21 mol
The enthalpy change for the combustion of 0.21 mol of O2 can be calculated using the standard enthalpies of formation:
ΔH = (12 × -393.5 kJ/mol) + (11 × -285.8 kJ/mol) - (-1274.9 kJ/mol) + (0 kJ/mol)
ΔH = -4694.4 kJ/mol
To calculate the enthalpy change for the combustion of 6.00 g of table sugar, we need to divide by the number of moles of C12H22O11:
ΔH = -4694.4 kJ/mol / 0.0175 mol
ΔH = -268,228 kJ/mol
Find out more about enthalpy change
brainly.com/question/2378537
#SPJ4
estimate the maximum conversion of ethylene to ethanol by vapor-phase hydration at 523.15 k and 35 bars for an initial steam-to-ethylene ratio of 5. at these conditions, the fugacity coefficients of ethylene, ethanol, and water are 0.977, 0.827, and 0.887 respectively. a) write the balanced chemical reaction and specify the stoichiometric coefficient of all the species. b) write the mol fraction of each species at any time in terms of x (molar extent of reaction), assuming that initially there are 1 mol of ethylene, 5 mol of steam, and no ethanol. c) calculate the equilibrium constant, k, under these conditions. d) calculate the equilibrium conversion of ethylene to ethanol.
The equilibrium conversion of ethylene to ethanol is:
x = 0.581 or 58.1% (rounded to one decimal place)
The balanced chemical reaction is as follows:
C2H4 + H2O → C2H5OH
The stoichiometric coefficient of ethylene is 1, and the stoichiometric coefficient of water is 1.
The stoichiometric coefficient of ethanol is also
1.b)The mole fraction of ethylene is given by (1-x)/6.
The mole fraction of steam is given by (5-3x)/6.
The mole fraction of ethanol is given by x/6.c)The expression for the equilibrium constant, K is given by the following formula:
K = yethanol / (yethylene * ywater)
K = (x/6) / [(1-x)/6 * (5-x)/6]
K = x / [(1-x) * (5-x)]d)
The equilibrium conversion of ethylene to ethanol is given by the following formula:x = K / (1+K)At the given conditions of 523.15 K and 35 bars, the value of K is 1.389. Therefore, the equilibrium conversion of ethylene to ethanol is:
x = 1.389 / (1+1.389)
x = 0.581 or 58.1% (rounded to one decimal place)
To learn more about: Equilibrium :
https://brainly.com/question/19340344
#SPJ11
which salt is produced by the neutralization of hydrobromic acid with magnesium hydroxide? group of answer choices mgbr2 mg3br2 mg2br mg2br3 mgbr
The salt produced by the neutralization of hydrobromic acid (HBr) with magnesium hydroxide (Mg(OH)₂) is magnesium bromide (MgBr₂).
During a neutralization reaction, an acid and a base react to form a salt and water. In this case, hydrobromic acid is the acid, and magnesium hydroxide is the base. The balanced chemical equation for this reaction is:
HBr + Mg(OH)₂ → MgBr₂ + 2H₂O
In this equation, the H+ ions from hydrobromic acid and the OH- ions from magnesium hydroxide combine to form water (H₂O), while the Mg²+ ions from magnesium hydroxide and the Br- ions from hydrobromic acid combine to form magnesium bromide (MgBr₂).
To determine the correct formula for the resulting salt, it is essential to consider the charges of the ions involved. Magnesium (Mg) has a charge of +2, and bromide (Br) has a charge of -1. To form a neutral compound, the charges must balance, which is why the formula for magnesium bromide is MgBr₂, with two bromide ions to balance the +2 charge of magnesium.
Thus, the correct answer from the given choices is MgBr₂, magnesium bromide.
Know more about magnesium bromide here :
brainly.com/question/29324548
#SPJ11
How many protons, neutrons, and electrons are in this ion?
Answer:
Ans C is the correct one.
As the element with 15 proton 15 electrons and 16 neutron is phosphorus
calculate the ph during the titration of 36.53 ml of 0.29 m hno3(aq) with 0.12 m naoh after 11.23 ml of the base have been added
During the titration of 36.53 ml of 0.29 m hno3(aq) with 0.12 m naoh after 11.23 ml of the base 0.71 of pH have been added.
During the titration of [tex]HNO_{3}[/tex] with NaOH, the reaction can be represented as:
[tex]HNO_{3}[/tex] + NaOH → [tex]NaNO_{3}[/tex] +[tex]H_{2}O[/tex]
To calculate the pH, first determine the moles of [tex]HNO_{3}[/tex] and NaOH.
moles of [tex]HNO_{3}[/tex] = volume (L) × concentration (M) = 0.03653 L × 0.29 M = 0.01059 mol
moles of NaOH = 0.01123 L × 0.12 M = 0.001348 mol
Now, find the moles of [tex]HNO_{3}[/tex] remaining after reaction with NaOH:
moles of [tex]HNO_{3}[/tex] remaining = 0.01059 mol - 0.001348 mol = 0.009242 mol
Calculate the new concentration of[tex]HNO_{3}[/tex]:
concentration of [tex]HNO_{3}[/tex] = moles of [tex]HNO_{3}[/tex] remaining / total volume
total volume = initial volume of [tex]HNO_{3}[/tex]+ volume of NaOH added = 0.03653 L + 0.01123 L = 0.04776 L
concentration of [tex]HNO_{3}[/tex] = 0.009242 mol / 0.04776 L = 0.1935 M
Finally, calculate the pH using the formula:
pH = -log[H+] = -log([[tex]HNO_{3}[/tex]]) = -log(0.1935) ≈ 0.71
Know more about titration here:
https://brainly.com/question/186765
#SPJ11
the reaction a(g) b(g) c(g) d(g) 30 kj has a forward activation energy of 20 kj. what is the activation energy for the reverse reaction?
The activation energy for the reverse reaction of A(g) + B(g) <=> C(g) + D(g) can be determined using the given forward activation energy (20 kJ) and the enthalpy change of the reaction (30 kJ).
The activation energy for the reverse reaction can be calculated using the formula:
Ea(reverse) = Ea(forward) + ΔH
Where Ea(reverse) is the activation energy for the reverse reaction, Ea(forward) is the activation energy for the forward reaction (20 kJ), and ΔH is the enthalpy change of the reaction (30 kJ).
By plugging the values into the formula, we get
Ea(reverse) = 20 kJ + 30 kJ
Ea(reverse) = 50 kJ
So, the activation energy for the reverse reaction is 50 kJ. This means that to break the bonds in C and D and form A and B, 50 kJ of energy is required. In general, activation energy is the minimum amount of energy required for a chemical reaction to occur. In this case, the forward reaction has a lower activation energy (20 kJ), which means it is easier to form C and D from A and B compared to the reverse reaction.
Know more about activation energy here:
https://brainly.com/question/10507976
#SPJ11
compound has a molar mass of and the following composition: element mass % phosphorus 43.64% oxygen 56.36% write the molecular formula of .
The molecular formula is 2(P2O5), or P4O10.
To determine the molecular formula of the compound, we first need to find the empirical formula. We can assume 100 g of the compound, which means that there are 43.64 g of phosphorus and 56.36 g of oxygen.
We can convert the masses of each element to moles by dividing by their respective atomic masses:
moles of P = 43.64 g / 30.97 g/mol = 1.41 mol
moles of O = 56.36 g / 16.00 g/mol = 3.52 mol
Next, we can divide each number of moles by the smallest number to get the mole ratio:
P:O = 1.41 mol / 1.41 mol = 1
O:O = 3.52 mol / 1.41 mol = 2.49
We can round the mole ratio to the nearest whole number to get the empirical formula: P2O5
To find the molecular formula, we need to know the molar mass of the compound. Let's assume it is 284 g/mol (a multiple of the empirical formula mass of 142 g/mol).
We can divide the molar mass by the empirical formula mass to get the integer multiple:
n = 284 g/mol / 142 g/mol = 2
Find out more about molar mass
brainly.com/question/17032528
#SPJ4
the ksp of al(oh)3 is 1.0 x 10-33. what is the solubility of al(oh)3 in 0.000010 m naoh? give your answer using scientific notation and to 2 significant figures (i.e., one decimal place).
The solubility of Al(OH)3 in 0.000010 M NaOH is 3.2 x 10⁻¹°M to 2 significant figures.
How we can calculate solubility ?
The balanced chemical equation for the dissolution of Al(OH)3 in water is:
Al(OH)3(s) + 3 OH-(aq) ↔ Al(OH)3 3-(aq)
The solubility product expression is:
Ksp = [Al(OH)3 3-][OH-]³
Since the concentration of OH⁻ is provided, we can use it to find the concentration of Al(OH)3 3- and then calculate the solubility:
[OH-] = 0.000010 M
From the balanced equation, we can see that the concentration of Al(OH)3 3- is three times the concentration of OH⁻, so:
[Al(OH)3 3⁻] = 3[OH⁻] = 3(0.000010 M) = 3.0 x 10⁻⁵ M
Substituting this value and the Ksp into the solubility product expression, we get:
1.0 x 10⁻³³= (3.0 x 10⁻⁵)¹ [0.000010]³
Solving for the solubility [Al(OH)3] gives:
[Al(OH)3] = (1.0 x 10⁻³³/0.000010³)^1/4 = 3.2 x 10⁻¹° M
Therefore, the solubility of Al(OH)3 in 0.000010 M NaOH is 3.2 x 10⁻¹°M to 2 significant figures.
Learn more about solubility
brainly.com/question/29661360
#SPJ11
the graduated cylinder is not rinsed after transferring the sodium carbonate solution to the beaker? explain
If the graduated cylinder is not rinsed after transferring the sodium carbonate solution to the beaker, it can introduce a source of error into the experiment.
When a solution is transferred from one container to another, a small amount of the solution can remain in the container and stick to the walls or bottom of the container. This is known as residual solution or carryover, and it can affect the concentration of the solution being transferred.
In the case of transferring sodium carbonate solution to a beaker, any residual solution left in the graduated cylinder can affect the concentration of the sodium carbonate solution in the beaker. This can lead to inaccurate measurements and affect the outcome of the experiment.
Rinsing the graduated cylinder with a small amount of the solution being transferred can help ensure that all of the solution is transferred to the beaker and any residual solution is also added to the beaker. This can help to minimize the error introduced by residual solution or carryover.
To know more about solution, here
brainly.com/question/29732765
#SPJ4
which factor has more impact on the strength of an acid, the polarity of the bond or the length of the bond
Both polarity and bond length have an impact on the strength of an acid. But bond length has an effect on limited number of acids. So while comparing polarity has more impact on strength of the acid.
Strength of an acid is determined by how easily the acid dissociates and ionizes in water. Dissociation of acid is governed by the following factors.
1. Size of the atom
2. Electronegativity differences
3. Charge on the acid
4. Oxidation state of the central atom.
As the size increases, the bond length increases. The bond becomes weaker and dissociates easily. So the acid become stronger. This trend is usually seen in hydro halides. HCl will be a stronger acid than HF. But the bond length determines the strength of an acid only to a certain extend.
As difference in electronegativity increases, the polarity between atoms increases. So dissociation will become easier. So higher the polarity, greater the acid strength. In almost all acids, polarity determines its strength.
So polarity has more impact than bond length.
For more information regarding strength of an acid, kindly refer
https://brainly.com/question/30323941
#SPJ4
The molar mass of P2O5 is Blank 1 grams per mole. Please round atomic masses to the nearest whole number.
The molar mass of P2O5 is 142 grams per mole. This means that if we have one mole of P2O5, it will weigh 142 grams. Similarly, if we have 0.5 moles of P2O5, it will weigh 0.5 x 142 = 71 grams.
The molar mass of a compound is the mass of one mole of that compound. It is expressed in grams per mole. The molar mass is calculated by adding up the atomic masses of all the atoms in the compound.
In the case of P2O5, we have two phosphorus atoms and five oxygen atoms. The atomic mass of phosphorus is 31, which means that each phosphorus atom contributes 31 units of mass to the compound. The atomic mass of oxygen is 16, which means that each oxygen atom contributes 16 units of mass to the compound.
To calculate the molar mass of P2O5, we need to add up the mass contributed by each atom:
Molar mass of P2O5 = 2 x atomic mass of P + 5 x atomic mass of O
Molar mass of P2O5 = 2 x 31 + 5 x 16
Molar mass of P2O5 = 62 + 80
Molar mass of P2O5 = 142 g/mol.
Learn more about molar mass here:
https://brainly.com/question/30216315
#SPJ1
a solution is prepared by adding 0.10 mol of potassium chloride, kcl, to 1.00 l of water. which statement about the solution is correct?
The solution has a concentration of 0.10 M, is neutral with a pH of 7, and is electrically neutral.
At the point when 0.10 mol of potassium chloride (KCl) is added to 1.00 L of water, an answer is shaped. This arrangement has a grouping of 0.10 M, and that really intends that there are 0.10 moles of KCl per liter of water.The arrangement is impartial, as KCl is a salt that separates totally in water, delivering equivalent measures of potassium particles (K+) and chloride particles (Cl-), neither of which have acidic or essential properties. Subsequently, the pH of the arrangement is 7, which is unbiased.
This fixation is otherwise called the molarity of the arrangement. Furthermore, the arrangement is electrically nonpartisan, as the positive charges from the potassium particles balance out the negative charges from the chloride particles.
To learn more about molarity, refer:
https://brainly.com/question/29864297
#SPJ4
What is a correct statement about the solution prepared by adding 0.10 mol of potassium chloride, KCl, to 1.00 L of water?
the unknown aldehydes/ketones and sodium borohydride are all more soluble in ethyl acetate than methanol. would ethyl acetate therefore be a more suitable solvent for this experiment? why or why not? provide a reaction scheme to help explain your answer:
Ether acetate would be a suitable solution for the experiment based on the solubility of sodium borohydride and the mysterious aldehydes/ketones.
It is necessary to decrease unidentified aldehydes/ketones with sodium borohydride while submerging the reactants and products.
An unnamed ketone or aldehyde is reduced using sodium borohydride. The resulting alcohol (RCH2OH/R2CHOH), sodium borate (NaBO2), and hydrogen gas are produced when the unknown aldehyde or ketone (RCHO/R2CO) reacts with sodium borohydride (NaBH4). (H2).
Ethyl acetate would be a better solvent overall for the experiment because it would make the reactants and products more soluble.
Learn more about Ether acetate:
https://brainly.com/question/30434200
#SPJ4
What is the amount of heat required if 250.0 g of water is heated from 22.0 degrees C to 75.0 degrees C?
To calculate the amount of heat required to heat 250.0 g of water from 22.0 degrees C to 75.0 degrees C, we can use the formula:
Q = m × c × ΔT
where Q is the amount of heat, m is the mass of the water, c is the specific heat capacity of water, and ΔT is the change in temperature of the water.
The specific heat capacity of water is 4.184 J/(g·°C), which means that it takes 4.184 joules of energy to raise the temperature of 1 gram of water by 1 degree Celsius.
Substituting the given values, we get:
Q = 250.0 g × 4.184 J/(g·°C) × (75.0°C - 22.0°C)
Q = 250.0 g × 4.184 J/(g·°C) × 53.0°C
Q = 55,317.2 J or 55.32 kJ (to two decimal places)
Therefore, it requires 55.32 kJ of heat to raise the temperature of 250.0 g of water from 22.0°C to 75.0°C.
mark the developed spot with pencil. calculate the rfvalues. determine the components of unknowns a and bpare these values to those reported in literature.what could bethe identity of sample b?
Based on the identity of the components present in the unknown sample and their properties, make an educated guess as to the identity of sample B.
In general, however, the steps involved in calculating Rf values and identifying unknown components in chromatography would be as follows:
Run the chromatography experiment using a known set of standards and the unknown sample.
Develop the chromatogram by visualizing the spots using UV light, ninhydrin spray, iodine vapor, or other suitable methods.
Mark the center of each spot with a pencil or other suitable marking tool.
Measure the distance traveled by each spot from the origin to the center of the spot (known as the "spot distance") and the distance traveled by the solvent front (known as the "solvent distance").
Calculate the Rf value of each spot using the formula Rf = spot distance / solvent distance.
Compare the Rf values of the unknown sample to those of the known standards and literature values to identify the components present in the sample.
For more questions on Rf values
https://brainly.com/question/17751879
#SPJ11
How many moles of O2 form when 1.0 mole of KCIO3 decomposes?
The balanced chemical equation for the decomposition of KCIO3 is:
2 KClO3 → 2 KCl + 3 O2
From the equation, it can be seen that for every 2 moles of KCIO3 that decompose, 3 moles of O2 are formed. Therefore, to determine the number of moles of O2 formed when 1.0 mole of KCIO3 decomposes, we need to use the mole ratio of KCIO3 to O2.
The mole ratio of KCIO3 to O2 is 2:3 (from the balanced chemical equation), which means that for every 2 moles of KCIO3 that decompose, 3 moles of O2 are formed. Therefore, to find the number of moles of O2 formed when 1.0 mole of KCIO3 decomposes, we can use the following proportion:
2 moles KCIO3 / 3 moles O2 = 1 mole KCIO3 / x moles O2
Solving for x, we get:
x = (3 moles O2)(1 mole KCIO3) / (2 moles KCIO3) = 1.5 moles O2
Therefore, when 1.0 mole of KCIO3 decomposes, 1.5 moles of O2 are formed.
To know more about mole ratio, visit:
https://brainly.com/question/15288923
#SPJ1
what element is defined by the following information? p = 20 n° = 20 e- = 20
a. calcium
b. argon
c. potassium
d. neon
e. zirconium
The element defined by the following information: p = 20 n° = 20 e- = 20 is argon. The correct answer is option b.
What is an atom?An atom is the smallest constituent unit of ordinary matter that has the chemical properties of an element. An atom consists of a central nucleus, which is made up of protons and neutrons, as well as electrons that orbit the nucleus.
Every electron in an atom has a negative charge, and protons, which are situated in the nucleus, have a positive charge. A neutrally charged atom has the same number of protons as it does electrons. The atomic number is the number of protons in the nucleus of an atom.
The number of electrons in a neutral atom is the same as the number of protons. For instance, if an element has an atomic number of 6, it indicates that the nucleus of each atom contains six protons. All atoms of the same element have the same atomic number.
What is argon?Argon is a chemical element with the symbol Ar and atomic number 18. It is the third most abundant gas in the Earth's atmosphere, accounting for 0.934 percent of the atmosphere's volume.
Argon is colorless, odorless, and tasteless, and it is used in a variety of applications such as welding and lighting. Argon's atomic number is 18, indicating that it has 18 protons in its nucleus.
Argon has 18 electrons orbiting the nucleus, with the same number of electrons as protons. Argon is a member of the noble gas group, which is a group of elements that have eight electrons in their outermost electron shell.
The correct answer is option b.
To know more about argon refer to-
brainly.com/question/133359#
#SPJ11
What is a concern of the survey method of research?
1.the target population will not be able to be identified
2.the number of people in the survey may be too large
3.the researcher is dependent on the person answering the survey to be honest
4.all answers are correct
Concern of the survey method of research is : 3.)the researcher is dependent on the person answering the survey to be honest.
What is a concern of the survey method of research?One concern of the survey method of research is that the researcher is dependent on the person answering the survey to be honest. There is a risk that participants may provide inaccurate or incomplete responses due to range of factors such as social desirability bias, memory recall issues, or misunderstanding of questions.
Therefore, option 3)the researcher is dependent on the person answering the survey to be honest is the most accurate answer.
To know more about survey method, refer
https://brainly.com/question/13435620
#SPJ1