An employee is 10 years from retirement and has decided to begin making $2,000 annual contributions into an IRA. The employee is currently in the 33% tax bracket but expects to be in the
15% tax bracket at retirement.
Which of the following contains the better choice with the correct reasoning?
O The Traditional IRA is the better choice because the employee will be taxed at a lower rate on lower earnings in retirement than during employment.
O The Roth IRA is the better choice because the employee will be taxed at a lower rate on lower eamings during employment than in retirement
O The Traditional IRA is the better choice because the employee will be taxed at a higher rate on lower earnings in retirement than during employment.
O The Roth IRA is the better choice because the employee will be taxed at a higher rate on lower eamings during employment than in retirement.

Answer:

2/3

Step-by-step explanation:

A six sided number cube :

Sample space = 1,2,3,4,5,6

Non composite numbers on a six sided number cube = 1,2,3,5

Probability of an event = required outcome / Total possible outcomes

Required outcome = number of non composite number = 4

Total possible outcomes = sample space = 6

P(not composite)= 4/6 = 2/3

Answer:

1 solution

Step-by-step explanation:

Y = 4

Y = 4x - 1

Substitute value of Y here,

4 = 4x - 1

4 + 1 = 4x

5 = 4x

5/4 = x

1.25 = x

•°• The given equation can have only 1 solution, i.e, a linear equation with 1 variable gives only 1 solution.

______

hope this helps!

Answer:b

Step-by-step explanation:

trust it’s b

If you know the coordinates for points between A and B, that you can use this method to determine the dimensions of the spot that is located (0, 1/3) between A and B.

A set of integers called coordinates are used to locate a spot or a shape in a two-dimensional plane. The x-coordinate as well as the y-coordinate are two integers that describe a point's location on a  [tex]2D[/tex] plane.

To find the coordinates of the point that is [tex]1/3[/tex] of the way from point A to point B. we can use the midpoint formula, which states that the coordinates of the midpoint of the line segment joining two points [tex](x1, y1)[/tex]and  [tex](x2, y2)[/tex] are:

[tex]((x1 + x2)/2, (y1 + y2)/2)[/tex]

In this case, let's assume that point A has coordinates (x1, y1) and point B has coordinates (x2, y2). Then the point that is 1/3 of the way from A to B has coordinates:

[tex]((2/3) × x1 + (1/3) × x2, (2/3) × y1 + (1/3) × y2)[/tex]

Therefore, So if you have the coordinates of points A and B, you can plug them into this formula to find the coordinates of the point 1/3 of the way from A to B.

Learn more about coordinates here:

https://brainly.com/question/16634867

#SPJ1

The value of y and z are 11 and 11.

We can see from the diagram that the two triangles are of equal lengths.

To determine the value of the variables, we have to note that;

In triangle QRS, the adjacent sides is y + 20

In triangle VX, the adjacent side is y = 31

Now, equate the values

y + 20 = 31

collect like terms

y = 31 -20

y = 11

Also, the hypotenuse sides are equivalent, then

y + 3z + 28 = 6y + z - 5

collect the like terms

y - 6y + 3z - z = -5 - 28

add or subtract the values

-5y + 2z = -33

Substitute the values

2z = -33 + 55

2z = 22

z = 11

Learn about triangles at: https://brainly.com/question/1058720

#SPJ1

Answer:

(gof)(x) = 14x + 1

Step-by-step explanation:

We can think of (gof)(x) as g(f(x)).  Writing it in this form shows that we must start with the inner function and work our way to the outer function.

Essentially, the input of the inner function yields an output and the output becomes the input of the outer function.

f(x) means that the input is x and since we're given no value for x (e.g. x = so and so), the output is the original function or 2x - 1

Now, this output becomes the input for g(x):

g(2x-1) = 7(2x - 1) + 8

14x -7 + 8

(gof)(x) = 14x + 1

Okay, just think of dilations as scaling the object bigger or smaller. You are just multiplying all points on the shape by a common scalar.

The only other thing is a negative dilation reflects the shape over the origin (which is quite intuitive cause you negate all the coordinates).

Now for question 1 your just trying to find the scale factor given an original point and a dilated point. Since all points are multiplied by the same factor,

(-3,6)x = (-4,8)

x=4/3

For the second question, just check points to see if all follow the same dilation scale factor. For our purposes it suffices to just check the each vertex.

(1,1) -> (2,2) so the scale factor must be 2

(1,4) -> (2,8) good

(5,1) -> (10,2) good

(5,4) -> (10,8) good

So, this transformation describes a dilation. The scale factor is 2.

The value of x does not exist.

What is Quadratic equation?

A quadratic equation is a second-degree polynomial equation in a single variable of the form ax^{2} + bx + c = 0, where a, b, and c are constants and x is the variable. The highest exponent of the variable in a quadratic equation is 2, and the equation can be written in standard form, where the coefficient of the squared term (a) is not equal to zero.

The given expression is:

5x² - √3x + 2

This is a quadratic expression in the variable x, which means that it can be written in the form of ax² + bx + c, where a, b, and c are constants. In this case, we have:

a = 5

b = -√3

c = 2

We can use the quadratic formula to find the roots of this expression:

x = [-b ± √(b² - 4ac)] / 2a

Now, putting the values of a, b, and c, we get:

x = [-(-√3) ± √((-√3)² - 4(5)(2))] / 2(5)

Now, Simplifying the expression under the square root, we get:

x = [√3 ± √(-71)] / 10

Since the expression under the square root is negative, there are no real roots to this equation. Therefore, the expression 5x² - √3x + 2 has no real solutions.

To learn more about Quadratic equation, visit the link:

https://brainly.com/question/1214333

#SPJ1

Answer:

To calculate the surface area of an object, we need to know its shape. Please provide more information on the object's shape or context of the problem to calculate its surface area.

Answer:

Dragonflies

Step-by-step explanation:

They can fly on top of the water, but also, they have the fastest turns per second for their wings.

Answer:

We can use the formula for continuous compound interest to find the balance in Joseph and Deb's savings account after 1 year:

A = Pe^(rt)

where A is the balance, P is the principal (initial deposit), e is the mathematical constant approximately equal to 2.71828, r is the annual interest rate as a decimal, and t is the time in years.

Substituting the given values, we get:

A = $600.00e^(0.05*1)

Using a calculator, we get:

A ≈ $632.57

Therefore, Joseph and Deb will have approximately $632.57 in their savings account after 1 year. They can spend up to this amount on their trip. Rounded to the nearest cent, the answer is $632.57.

The range of the function is the set of all real numbers greater than or equal to -2, because the lowest possible value of the function is -2, which occurs at x = 2.

What is a piecewise function ?

A piecewise function is a function that is defined by different equations on different parts of its domain. The graph of a piecewise function consists of several distinct parts, each corresponding to a different equation.

The graph shown is an example of a piecewise function. The function is defined using different equations on different intervals of the domain.

On the interval from negative infinity to negative 2, the function is defined by the equation y = 2. This means that the value of the function is always 2 on this interval, regardless of the value of x.

On the interval from negative 2 to 2, the function is defined by the equation y = -x. This means that the value of the function is equal to the negative of x on this interval.

On the interval from 2 to positive infinity, the function is defined by the equation y = 2. This means that the value of the function is always 2 on this interval, regardless of the value of x.

At the point x = -2, the function experiences a discontinuity, because the two equations that define it have different values at this point. The function is not differentiable at this point, because it does not have a well-defined tangent line.

The domain of the function is the set of all real numbers, because there are no restrictions on the values of x that are allowed.

Therefore, The range of the function is the set of all real numbers greater than or equal to -2, because the lowest possible value of the function is -2, which occurs at x = 2.

To learn more about Piecewise function from given link.

https://brainly.com/question/24031122

#SPJ1

The statements that are true regarding the diagram given are:

Angle sum property of triangle states that the sum of interior angles of a triangle is 180°.

We have in the diagram that in the diagram given, the statements that are all true are:

m∠3 + m∠4 = 180° (angles on a straight line)

m∠4 = m∠1 + m∠2 (external angle theorem)

m∠1 + m∠2 + m∠3 = 180° (triangle sum theorem).

Learn more about triangle sum theorem at: brainly.com/question/7696843

#SPJ1

Answer:

|x-5|=0

Step-by-step explanation:

That was easy.

Answer:

Let's denote the length of the equal sides of the isosceles triangle by "x". Then the perimeter of the triangle can be expressed as:

Perimeter = 2x + 9

But we also know that the perimeter of the triangle is 25cm, so we can set these two expressions equal to each other and solve for x:

2x + 9 = 25

2x = 16

x = 8

Therefore, the length of each of the equal sides is 8cm. Now, we can use the formula for the area of a triangle:

Area = (base × height) / 2

Since the triangle is isosceles, we know that the height is also the perpendicular bisector of the base, dividing it into two equal parts of length 4.5cm each. Now we can find the height of the triangle using the Pythagorean theorem:

h² + 4.5² = 8²

h² + 20.25 = 64

h² = 43.75

h ≈ 6.61

Substituting these values into the formula for the area of the triangle, we get:

Area = (9 × 6.61) / 2

Area ≈ 29.76 cm²

Therefore, the area of the isosceles triangle is approximately 29.76 cm².

Answer:forgot the explanation

Step-by-step explanation: give me a equation to solve

The exponential equation represents a growth, and the rate of increase is 9%.

The general exponential equation is written as:

y = A*(1 + r)^x

Where A is the intial value, and r is the rate of growth or decay, depending of the sign of it (positive is growth, negative is decay).

Here we have:

y = 38*(1.09)^x

We can rewrite this as:

y = 38*(1 + 0.09)^x

So we can see that r is positive, thus, we have a growth, and the percentage rate of increase is 100% times r, or:

100%*0.09 = 9%

Learn more about exponential equations at:

https://brainly.com/question/11832081

#SPJ1

The amount of liquid that can be processed in 2 hours at a unit rate of 1 gallon per 18.25 minutes is calculated to be approximately 6.58 gallons.

What is unit rate?

A unit rate is the cost for only one of anything. This is expressed as a ratio with a denominator of 1. For instance, if you covered 70 yards in 10 seconds, you did so at an average speed of 7 yards per second. Although both of the ratios—70 yards in 10 seconds and 7 yards in one second—are rates, only the latter is a unit rate.

Assuming the unit rate of 1 gallon per 18.25 minutes, we can convert 2 hours to minutes by multiplying it by 60, which gives us 120 minutes.

So, in 120 minutes, the amount of liquid that can be processed at a unit rate of 1 gallon per 18.25 minutes would be:

(120 minutes) / (18.25 minutes/gallon) = 6.58 gallons

Therefore, the amount of liquid that can be processed in 2 hours at a unit rate of 1 gallon per 18.25 minutes is found out to be  approximately 6.58 gallons.

To learn more about the unit rate from the given link

https://brainly.com/question/4895463

#SPJ9

The complete question is :

What is the amount of liquid that can be processed in 2 hours at a unit rate of 1 gallon per 18.25 minutes?

The linear function can be written as:

f(x) = -x/3 + 17/3

A general linear function can be written as:

f(x) = ax + b

Where a is the slope, and b is the y-intercept.

If we know two points on the line (x₁, y₁) and (x₂, y₂), then the slope of the linear function is:

a= (y₂ - y₁)/(x₂ - x₁)

Here we know the pairs:

f(-4) = 7

f(5) = 4

So we have the points (-4, 7) and (5, 4), then the slope is:

a = (4 - 7)/(5 + 4) = -3/9 = -1/3

Then we can write:

f(x) = -x/3 + b

now we can use one of the given points, like f(5) = 4, replacing that there we will get:

4 = -5/3 + b

4 + 5/3 = b

12/3 + 5/3 = b

17/3 = b

So the function is:

f(x) = -x/3 + 17/3

Learn more about linear functions at:

https://brainly.com/question/4025726

#SPJ1

Answer: 15 of those teachers are men

Step-by-step explanation: 2 out of 3, is of course written as 2/3

if 2/3 are women, this means 2/3 of 45 is 30, meaning 30 of the teachers are women, so if 30/45 are women, the remaining 15 are men

Part 1: a. A. The sample size needs to be greater than or equal to 30.

Part 2: The probability is approximately 0.0013.

Part 3: There is a 10% chance of being at or below a mean oil-change time of 14.9 minutes.

The number of individuals or items in a population that are selected for study.

A. The sample size needs to be greater than or equal to 30.

This is due to the Central Limit Theorem, which states that the sample size of a normal distribution must be 30 or more to produce reliable results.

If a sample size is less than 30, the results may be skewed and not accurately represent the true population mean and standard deviation.

B. The probability is approximately 0.0013.

This probability can be calculated by using the z-score formula and plugging in the mean, standard deviation, and sample size.

The z-score for a sample mean of 15 minutes =-3.3,

which translates to a probability of 0.0013 using the z-score table.

C. There is a 10% chance of being at or below a mean oil-change time of 14.9 minutes.

This can be calculated by using the z-score formula and plugging in the mean, standard deviation, and sample size.

The z-score for a 10% chance= -1.28,

which translates to a mean oil-change time of 14.9 minutes.

For more questions related to z-score

https://brainly.com/question/28096232

#SPJ1

We need to add a volume of 39.69 fluid ounces of gasoline to the mixture to bring it to 50 parts gasoline and 1 part oil.

Mensuration is the branch of mathematics concerned with the measurement of geometric figures and parameters such as length, volume, shape, surface area, and lateral area. 

According to information in the question:

The mixture is 40 parts gasoline and 1 part oil, there are 40 + 1 = 41 parts in total.

Let, the amount of oil in the mixture "x".

We know that there are 2 and 1/2 gallons of the mixture, which is the same as 2.5 * 128 = 320 fluid ounces.

So, the equation which can be formed is

x/41 * 320 = the amount of oil in the mixture (in fluid ounces)

Solving for "x":

x/41 * 320 = x/41 * 50 + 320 - (x/41 * 50)

Multiplying both sides by 41:

x * 320 = 50x + 41(320 - 50x)

Simplifying:

320x = 41(320)

x = 41 * 10 = 410 (fluid ounces of oil in the mixture)

Thus, amount of gasoline in the mixture is

40 parts gasoline / 41 parts total * 320 fluid ounces = 311.22 fluid ounces of gasoline.

Let the gasoline we need be "y", so a equation can be formed as follows

(311.22 + y)/(41 + y) * 320 = 410

Solving for y:

(311.22 + y)/(41 + y) = 410/320

Multiplying both sides by (41 + y) * 320:

311.22 + y = 410/320 * (41 + y) * 320

Simplifying:

311.22 + y = 205.625 * (41 + y)

311.22 + y = 8434.375 + 205.625y

Solving for y:

204.625y = 8123.155

y = 39.69 (fluid ounces of gasoline to add)

Therefore, we need to add 39.69 fluid ounces volume of gasoline to the mixture to bring it to 50 parts gasoline and 1 part oil.

To learn more about volume, visit the link below

https://brainly.com/question/1578538?

#SPJ9

Answer:  mBED = 2(42°) = 84°

Step-by-step explanation:
  We are asked to find the measure of the central angle ∠BED in the circle given that the measure of the minor arc BD is 42°.

We can use the formula that states that the measure of a central angle is equal to twice the measure of its intercepted arc. That is,

m∠BED = 2*mBD

We can substitute the value of mBD, which is 42°, into our equation.

m∠BED = 2*42°

m∠BED = 84°

Therefore, the measure of the central angle ∠BED is 84°.

Answer:

85 degrees.

Step-by-step explanation:

These are parallelograms, meaning the opposite sides are parallel. Since they are parallel, that the line EA becomes a transversal and a bisector for the angle CEK. That means the angle 8 and 3 are equivalent and 7 and 4 are equivalent. This is due to Same Side Interior Angles. These are two halves of the big angle. If the halves are equal, so are the angles. Therefore, CEK = CAK.

Try going to the store and they should be surprisingly cheap.

Answer: here it is.

Step-by-step explanation:

Slope is zero and the y-intercept is (0,-5)

What is slope ?

In mathematics, slope is a measure of the steepness of a line. It is defined as the ratio of the vertical change (rise) between two points on the line to the horizontal change (run) between the same two points.

In other words, the slope of a line is the change in the y-coordinate divided by the change in the x-coordinate between any two points on the line. It can also be thought of as the rate at which the line rises or falls as it moves horizontally.

The formula for calculating slope is:

slope = (y2 - y1) / (x2 - x1)

where (x1, y1) and (x2, y2) are two points on the line.

According to the question:
The equation Y = -5 is already in slope-intercept form, which is y = mx + b, where m is the slope and b is the y-intercept.

Comparing the equation Y = -5 to y = mx + b, we can see that:

The slope, m, is 0, since there is no x-term in the equation.

The y-intercept, b, is -5, since that is the constant value in the equation.

Therefore, the correct answer is:

B. Slope is zero and the y-intercept is (0,-5)


To know more about slope visit:
https://brainly.com/question/14548961
#SPJ1

Answer:

To find the domain of the function f(x) = (x-7)(x-1)/(x+3)(x-1), we need to consider the values of x that make the denominator zero since division by zero is undefined.

In this case, the denominator (x+3)(x-1) is zero when x = -3 and x = 1. Therefore, we need to exclude these values from the domain.

So, the domain of f(x) is all real numbers except x = -3 and x = 1.

In interval notation, we can write the domain as (-∞, -3) U (-3, 1) U (1, ∞).

Answer:

7/8 - 2/3 = 5/8 pint of water left in the bottle.

Answer:

Step-by-step explanation: 1. is Yes 2 is no 3. is all 4 is Y and 50 5 is yes and -1