The capacity of Supercut in customers per hour is 18.
The capacity of Supercut is the total number of customers served by three stylists in an hour, considering the average time it takes each stylist to serve one customer. This capacity calculation helps Supercut in keeping up with demand and avoiding long waiting periods, which could discourage clients.
The given data: Supercut salon has three stylists. The average time each stylist takes to serve one customer is 10 minutes. According to the data provided, it takes 10 minutes for each stylist to serve one customer, and there are three stylists. So, in 1 hour (60 minutes), each stylist will have the capacity to serve six clients.
Supercut's total capacity in an hour is calculated by adding up the capacity of each stylist. Therefore, the capacity of Supercut is: Capacity of Supercut = Capacity of each stylist * Number of Stylists= 6 customers * 3 stylists= 18 customers. Therefore, the capacity of the Supercut salon in customers per hour is 18.
To know more about capacity refer here:
https://brainly.com/question/31196313#
#SPJ11
Subtract the following polynomials.
The subtraction of the polynomials (3.1x + 2.8z) - (4.3x - 1.2z) is -1.2x + 4x
How to subtract polynomials?A polynomial is an expression consisting of a sum of a finite number of terms, each term being the product of a constant coefficient and one or more variables raised to a non-negative integer power.
(3.1x + 2.8z) - (4.3x - 1.2z)
open parenthesis
3.1x + 2.8z - 4.3x + 1.2z
combine like terms
3.1x - 4.3x + 2.8z + 1.2z
-1.2x + 4x
Ultimately, -1.2x + 4x is the results of the subtraction of the polynomial.
Read more on polynomials:
https://brainly.com/question/4142886
#SPJ1
HELP ME ASAPPPPP!!!!
Thus, the explicit formula for the simple interest sequence A(n) = P + (n-1)(i.P) is: A(n) = P * (1 + i * (n-1)).
What is simple interest?Simple interest is a method of calculating interest on a loan or investment where interest is charged only on the initial principal amount. In simple interest, the interest rate is applied to the original principal amount, and the interest earned remains the same throughout the entire term of the loan or investment.
by the question.
The formula for a simple interest sequence A(n) = P + (n-1) (i.P) represents the value of an investment that earns simple interest over n periods, where:
A(n) is the value of the investment after n periods.
P is the principal or initial investment
i is the interest rate per period as a decimal fraction (e.g. 0.05 for 5%)
n is the number of periods
To derive the explicit formula for A(n), we can use the formula for simple interest:
I = P * i * n
where I am the total interest earned over n periods. We can then express A(n) as:
A(n) = P + I
Substituting the expression for I, we get:
A(n) = P + P * i * (n-1)
Simplifying, we can factor out P to get:
A(n) = P * (1 + i * (n-1))
To learn more about amount:
https://brainly.com/question/13024617
#SPJ1
How do the values of the 1s in 14. 937 and 6. 1225 compare?
The 1s in 14.937 and 6.1225 have distinct values. The digit 1 in 14.937 is in the thousandths place, representing a value of 0.001, but the digit 1 in 6.1225 is in the hundredths place, representing a value of 0.01.
When we compare the values of the 1s in these two numbers, we can observe that the 1 in 6.1225 is 10 times bigger than the 1 in 14.937. This is due to the fact that the place value of digit 1 in 6.1225 is ten times bigger than the place value of digit 1 in 14.937. It should be noted that while comparing the values of digits in numbers, their location or place value is a significant consideration. Even the smallest Changes in a digit's location can have a substantial influence on its total value. The variation in place value of the 1s in 14.937 and 6.1225 leads in a considerable disparity in their respective values in this situation.
Learn more about values here:
https://brainly.com/question/30781415
#SPJ4
at steady state, the throughput time for one loaf is 3 hours 30 minutes. how much total wip is in the system, in loaves
At steady state, the total WIP in the system is equal to the throughput time divided by the time it takes to make one loaf. Thus, the total WIP in the system is 3.5 loaves.
The total WIP in a system is the sum of all of the work that is in progress. At steady state, the total WIP in the system can be calculated by dividing the throughput time (the time it takes for one loaf to be processed from start to finish) by the time it takes to make one loaf.
In this example, the throughput time is 3 hours 30 minutes and it takes 1 hour to make one loaf. Therefore, the total WIP in the system is 3.5 loaves. This means that at any given time, there are 3.5 loaves in progress in the system.
To know more about throughput time click on below link:
https://brainly.com/question/29669039#
#SPJ11
in conducting a lagrange multiplier test for second-order autocorrelation at the five-percent level of significance, what is the critical value to be used? show your work.
The critical value to be used in conducting a Lagrange multiplier test for second-order autocorrelation at the five-percent level of significance is 3.84.
The Lagrange multiplier test is a technique for testing hypotheses concerning the existence of structure in the disturbance term of regression models. In a variety of econometric models, the presence of autocorrelation (serial correlation) and heteroscedasticity are two examples of such structures.
The LM test is used to determine whether or not autocorrelation is present in a regression model, with the null hypothesis being that there is no autocorrelation. The null hypothesis is always of the form that there is no structure in the disturbance term, i.e. that the errors are not autocorrelated, and the alternative hypothesis is always of the form that some or all of the coefficients are nonzero, indicating the presence of autocorrelation or heteroscedasticity.
The critical value for the Lagrange multiplier test is calculated using a chi-squared distribution, with the degree of freedom being equal to the number of coefficients tested.
The formula for the Lagrange multiplier statistic is given:
LM = T * R² where T is the sample size and R² is the coefficient of determination for the regression.
This value is compared to the critical value of the chi-squared distribution with one degree of freedom to determine whether or not to reject the null hypothesis of no autocorrelation.
The level of significance of the test determines which critical value to use. In this case, the level of significance is 5 percent, so the critical value is 3.84.
To know more about the "Lagrange multiplier " test: https://brainly.com/question/4609414
#SPJ11
Write the ratios for sin A and cos A. The diagram is not drawn to scale.
sin A= 14/50 cos A 48/50
sin A= 48/50 cos A 14/50
sin A 48/14 cos A 14/50
sin A= 48/50 cos A 14/48
The ratio of SINA and COSA = 48/50 and 14/50
What is trignometric ratios?This is the boundary or contour length of a 2D geometric shape.
Depending on their size, multiple shapes may have the same circumference. For example, imagine a triangle made up of wires of length L.
The same wire can be used to create a square if all sides are the same length.
The length covered by the perimeter of the shape is called the perimeter. Therefore, the units of circumference are the same as the units of length.
As we can say, the surroundings are one-dimensional. As a result, you can measure in meters, kilometers, millimeters, etc.
Inches, feet, yards, and miles are other globally recognized units of circumference measurement.
According to our question,
sina = perpendicular\ hypotenuse
= 48/50
cosa= base\ perpendicular
=
14/50
Hence, The ratio of SINA and COSA = 48/50 and 14/50
learn more about trigonometric ratios click here:
brainly.com/question/1201366
#SPJ1
I WILL MARK BRAINLIEST
Answer: If Ava sells a $365 laptop, then she will make $91.25 in commissions.
Step-by-step explanation: 25% of 365 is 91.25
What number is in between 2/5 and 8/15 in its simpilist form
Answer:
búscalos
Step-by-step explanation:
Answer:
7/15
Step-by-step explanation:
2/5 can be converted into 6/15 by multiplying the numerator and denominator by 3. The next number between 6 and 8 is 7, so the answer is 7/15.
if the numerator of a certain fraction is a quarter of the value of the whole fraction, what is the value of the denominator of that fraction?
When the numerator of a certain fraction is a quarter of the value of the whole fraction, the value of the denominator of that fraction is four times the value of the numerator
The denominator of a certain fraction is a number that divides the numerator to produce a fraction. The fraction has two parts, the numerator, and the denominator. The numerator is the top part of a fraction, and the denominator is the bottom part of the fraction. When the numerator of a certain fraction is a quarter of the value of the whole fraction, the value of the denominator of that fraction can be calculated using a mathematical formula.
The mathematical formula for calculating the value of the denominator of a certain fraction is to divide the numerator by the quarter. This is because the numerator is a quarter of the value of the whole fraction. Therefore, the formula is represented as:D = N/1/4where D is the denominator, and N is the numerator of the fraction.To solve for D, we multiply both sides by the reciprocal of the fraction:1/4 = 4/1, so we have:D = N x 4/1D = 4N/
Therefore, the value of the denominator of the fraction is four times the value of the numerator. If the numerator of the fraction is 2, then the denominator of the fraction is 8. In summary, when the numerator of a certain fraction is a quarter of the value of the whole fraction, the value of the denominator of that fraction is four times the value of the numerator.
To know more about fraction refer here:
https://brainly.com/question/18134643
#SPJ11
a marketing research company desires to know the mean consumption of milk per week among people over age 32. they believe that the milk consumption has a mean of 3.1 liters, and want to construct a 98% confidence interval with a maximum error of 0.1 liters. assuming a standard deviation of 0.9 liters, what is the minimum number of people over age 32 they must include in their sample? round your answer up to the next integer.
The minimum number of people over age 32 they must include in their sample or sample size is equals to the 486.
In this question, we will use the margin of error of the 98% confidence interval for the population mean to determine the minimum sample size. We have to provide following informations for consumption of milk per week among people over age 32.
Mean = 3.1 liters
Confidence interval = 98%
Maximum/Margin of error = 0.1 liters
Standard deviations = 0.9 liters
level of significance, α = 1 - 0.98 = 0.02
or α/2 = 0.01
We have to determine the sample size for people over age 32 they must include in their sample. The margin of error is calculated by multiplying a key factor (for a certain level of confidence) by the population standard deviation. The result is then divided by the square root of the number of observations in the sample. Mathematically, [tex] ME =Z_{\frac{\alpha}{2}}\sqrt{ \frac{ σ}{n} }[/tex]
Using the Z-distribution table, value of z for 98% of confidence interval is 2.326. Substituting the known values in above formula, 0.1 = 2.326 √0.9/n
=> √0.9/n = 0.1/2.33 = 0.043
=> 0.9/n = (0.043)² = 0.001849
=> n = 0.9/0.00185
=> n = 486.4865 ~ 486
Hence, required sample size is 486.
For more information about sample size, visit :
https://brainly.com/question/30528695
#SPJ4
How do I solve this?
The unit digit of the given sum [tex]1998^{1999}-1999^{1998}[/tex] is one according to the one's place of 8 and 9 powers.
Here, we need to find the unit digit of [tex]1998^{1999}[/tex] :
8 power of any dight will give us the unit digit of 8, 4, 2 and 6.
Here 8 has power 9.
Then the unit place of the sum will be equal to 2.
Similarly, we need to find the sum of other one.
Other sum: [tex]1999^{1998}[/tex]
9 power of 8
9 power of odd numbers will give 9 as unit digit.
9 power of even numbers will give 1 as unit digit.
Here, we have 8 as power the, we will get the unit digit as 1.
Now we need to simplify the sum.
Unit digit of [tex]1998^{1999}-1999^{1998}[/tex] is equal to 2 - 1 = 1.
The unit digit of the given sum [tex]1998^{1999}-1999^{1998}[/tex] is one.
Learn more about Unit Digits:
https://brainly.com/question/30143551
#SPJ1
7. Levi invests $600 into an account earning 4% annual interest compounded monthly. How much money
will he have in 14 years?
Answer:
Step-by-step explanation:
To solve this question, we can use the formula for compound interest:
A = P(1 + r/n)^(nt)
Where:
A is the total amount of money after t years
P is the initial principal (in this case, $600)
r is the annual interest rate (4%)
n is the number of times the interest is compounded per year (12, for monthly compounding)
t is the number of years
Plugging in the values, we get:
A = 600(1 + 0.04/12)^(12*14)
A = 600(1.00333)^168
A = $988.42 (rounded to two decimal places)
So, after 14 years, Levi will have approximately $988.42 in his account.
to avoid a near midair collision (nmac) with a manned airplane, you estimate that your small ua climbed to an altitude greater than 400 feet agl. to whom must you submit a written report of the deviation?
you estimate that your UA climbed to an altitude greater than 400 feet above ground level (AGL), you must submit a written report of the deviation to the Federal Aviation Administration (FAA).
If you are operating a small unmanned aircraft (UA) and have had a near mid-air collision (NMAC) with a manned airplane, and you estimate that your UA climbed to an altitude greater than 400 feet above ground level (AGL), you must submit a written report of the deviation to the Federal Aviation Administration (FAA).
According to the FAA regulations, any UAS operator involved in an NMAC with a manned aircraft must submit a report to the FAA within ten days of the incident. This report must include the date, time, and location of the incident, as well as a detailed description of the events leading up to the NMAC.
You can submit the report online via the FAA's Aviation Safety Reporting System (ASRS) website. The ASRS is a voluntary reporting system that allows pilots and UAS operators to report incidents without fear of enforcement action, provided that the incident was not a result of reckless or intentional behavior.
Learn more about deviation here
https://brainly.com/question/13905583
#SPJ4
For a particular statistics exam, being male is independent of passing the test. The probability of being male is 0. 5 and the probability of passing the test is 0. 8. What is the probability of being male and passing the test?
The probability of being male and passing the test is 0.4.
The probability of being male and passing the test can be calculated using the formula for independent events: P(A and B) = P(A) × P(B).
In this case, A represents being male (P(A) = 0.5), and B represents passing the test (P(B) = 0.8).
Step 1: Identify the probabilities of the independent events.
P(A) = 0.5 (being male)
P(B) = 0.8 (passing the test)
Step 2: Apply the formula for independent events.
P(A and B) = P(A) × P(B)
P(being male and passing the test) = P(being male) × P(passing the test)
Step 3: Calculate the probability.
P(being male and passing the test) = 0.5 × 0.8 = 0.4
So, the probability of being male and passing the test is 0.4.
for such more question on probability
https://brainly.com/question/24756209
#SPJ11
PLEASE HELP!!
Solve and explain
Answer:
Step-by-step explanation:
holy mocacrise
researchers find that pet owners live longer, healthier lives. within this study, pet ownership is the select one: a. independent variable. b. dependent variable. c. spurious variable. d. operational variable.
The answer is option A, pet ownership is the independent variable.
In experimental research, an independent variable is the variable that is manipulated by the researcher to determine its effect on the dependent variable. In this case, the independent variable is pet ownership, which is being studied to determine its effect on the health and lifespan of pet owners.
The dependent variable, in turn, is the health and lifespan of pet owners, which is expected to be influenced by their pet ownership status.
It is important to note that the relationship between pet ownership and health/lifespan could be influenced by other factors, such as age, income, or lifestyle. These other factors are known as spurious variables and can confound the relationship between the independent and dependent variables.
Operational variables, on the other hand, refer to how the researcher measures or manipulates the independent and dependent variables.
To know more about independent variable refer here:
https://brainly.com/question/29430246#
#SPJ11
what is x+6=10 and show your work
Answer:
4
Step-by-step explanation:
4+6=10
if a college instructor alters the distribution of his or her students' midterm exam grades because the class did not do as well as last year's class, with what type of standards is the instructor most concerned?
The college instructor is most concerned with equity standards.
Equity standards are when an instructor adjusts grades to ensure fairness to all students regardless of their individual performances.
This means that if a class as a whole does not do as well as last year, the instructor will alter the distribution of grades so that the overall grades reflect the effort put in by the class.
For example, if the class average is a C, the instructor may raise some grades to a B or even A in order to ensure that the grades are fair to all students in the class.
To know more about Equity standards click on below link:
https://brainly.com/question/11138125#
#SPJ11
if elisa gets an allowance of $30 per week and spends $10 of it on food and drink, $5 on entertainment and $5 on miscellaneous things, how much does she have available to put aside for savings each week?
Answer: She has 10$ to save
Step-by-step explanation:
Elsia has 30$ to start her week. She spent 10 on food and drink, (30-10=20) 5 on entertainment, (20-5=15), and 5 on Misc. things. (15-5=10). This means that the answer is 10.
Steps:
30-10=20
20-5=15
15-5=10
I hope it helped! :D
the radius of a circle is 6 inches what is the area of a sector biunded by 180 degrees arc
The area οf the sectοr bοunded by a 180 degrees arc with a radius οf 6 inches is 18π square inches.
Hοw tο calculate the area οf the sectοr bοunded by a 180 degrees arc?The area οf a sectοr bοunded by a central angle θ and radius r is given by the fοrmula:
A = (θ/360) x πr²
In this case, the central angle is 180 degrees and the radius is 6 inches. we get:
A = (180/360) x π(6²)
= (1/2) x π x 36
= 18π
Therefοre, the area οf the sectοr bοunded by a 180 degrees arc with a radius οf 6 inches is 18π square inches.
To learn more about area, visit:
https://brainly.com/question/7512468
#SPJ9
a line in the xy-plane passes through the origin and has a slope of 1 7 . which of the following points lies on the line? a) (0, 7) b) (1, 7) c) (7, 7) d) (14, 2)
the y-coordinate must be 7 in order for the point to lie on the line.
A line in the xy-plane passes through the origin and has a slope of 1/7. Point B (1, 7) lies on the line, as the slope of the line is calculated by the equation y = mx + b, where m is the slope of the line, and b is the y-intercept. Since the line passes through the origin, the y-intercept is 0. This can be expressed as y = (1/7)x + 0
Learn more about coordinate
brainly.com/question/16634867
#SPJ11
Find the tangent of the larger acute angle in a right triangle with side lengths 10, 24, and 26.
Tangent of the larger acute angle:
Answer:
Step-by-step explanation:
Answer:4/3
Answer:
The tangent of the larger acute angle in a right triangle with side lengths 10, 24, and 26 is 12/5.
Step-by-step explanation:
In a right triangle, the hypotenuse (the side opposite the right angle) is the longest side.
Therefore, in a right triangle with side lengths 10, 24, and 26, the hypotenuse measures 26 units and the legs measure 10 and 24 units.
In a right triangle:
The angle opposite the shortest leg is the smallest acute angle.The angle opposite the longest leg is the largest acute angle.Therefore, the largest acute angle is between the hypotenuse and the shortest leg, which means the side opposite the angle is the longest leg.
The tangent ratio is the ratio of the side opposite the angle to the side adjacent the angle.
Therefore the tangent of the largest acute angle is:
[tex]\implies \sf \dfrac{O}{A}=\dfrac{24}{10}=\dfrac{12}{5}[/tex]
find the surface area of the prism
The surface area of the prism is 264m²
What is surface area of prism?A prism is a solid shape that is bound on all its sides by plane faces. There are different types of prism but the specific one we will be talking about here is triangular based prism.
The surface area of a prism is obtained by adding the area of the faces. Therefore surface area = 2B +ph
area of the base = 1/2 bh
= 1/2 × 6 × 8
= 1/2 × 48
= 24m²
using Pythagoras theorem, the hypotenuse of the triangle = √ 6²+8²
= √ 36+64
= √100 = 10m
perimeter of the base = 6+8+ 10
= 24m
Therefore SA = 2×24 + 24 × 9
= 48 + 216
= 264m²
learn more about surface area of prism from
https://brainly.com/question/1297098
#SPJ1
A 30-foot support cable is attached 22 feet up from the base of an electric pole. What is the measure of the angle to the nearest tenth that the cable makes with the ground?
Answer:
In this problem, we have a right triangle where the hypotenuse is the 30-foot support cable and one leg is 22 feet (the distance from the base of the pole to where the cable is attached). To find the angle that the cable makes with the ground, we need to use trigonometry. The tangent of an angle in a right triangle is equal to the length of the opposite side divided by the length of the adjacent side. In this case, we want to find tan(θ), where θ is the angle between the cable and the ground. Therefore, tan(θ) = opposite/adjacent = 22/30 = 0.7333. Taking inverse tangent on both sides gives us θ = tan^-1(0.7333) ≈ 36.7 degrees to one decimal place. Therefore, to the nearest tenth, the measure of the angle that the cable makes with the ground is approximately 36.7 degrees.
select a correct multiple regression equation that can be used to analyze the data for a two-factorial design with two levels for factor and three levels for factor . define all variables.
A multiple regression equation that can be used to analyze the data for a two-factorial design with two levels for factor A and three levels for factor B can be written as:
Y = b0 + b1A + b2B + b3AB + e
where Y is the dependent variable, A is the independent variable for factor A, B is the independent variable for factor B, A*B is the interaction between A and B, and e is the error term.
The variables can be defined as follows:
Y: The dependent variable that is being measured in the study.
A: The independent variable representing factor A, which has two levels (A1 and A2).
B: The independent variable representing factor B, which has three levels (B1, B2, and B3).
A*B: The interaction term between factor A and factor B.
e: The error term that captures the variability in the dependent variable that is not explained by the independent variables.
This equation allows us to examine the main effects of both factors (A and B) as well as their interaction (A*B) on the dependent variable Y in a two-factorial design.
To know more about multiple regression refer here:
https://brainly.com/question/3737733#
#SPJ11
in how many ways can a sample of 5 keyboards be selected so that exactly two have an electrical defect?
There are 105 ways to select a sample of 5 keyboards from a set of 10 keyboards such that exactly 2 of the keyboards have an electrical defect.
To find the number of ways to select a sample of 5 keyboards so that exactly 2 have an electrical defect, we can use the combination formula:
C(n,k) = n! / (k! * (n-k)!)
where n is the total number of keyboards, k is the number of defective keyboards, and C(n,k) is the number of ways to choose k defective keyboards from a total of n keyboards. Here, n = 10 (assuming there are 10 keyboards in the sample), and k = 2.
We can choose 2 defective keyboards from the total of 3 defective keyboards in C(3,2) = 3 ways. We can also choose 3 non-defective keyboards from the total of 7 non-defective keyboards in C(7,3) = 35 ways. Therefore, the total number of ways to select a sample of 5 keyboards so that exactly 2 have an electrical defect is:
C(3,2) * C(7,3) = 3 * 35 = 105
So there are 105 ways to select a sample of 5 keyboards from a set of 10 keyboards such that exactly 2 of the keyboards have an electrical defect.
To know more about combination formula: click here:
brainly.com/question/13095958
#SPJ4
In 1900, about 3.05 million people lived in Texas. Altogether, about 76.1 million people lived in the United States. About how many people in the United States did not live in Texas. PLEASE HELP I ONLY HAVE 5 MINUTES
Answer:
Step-by-step explanation:
To find out how many people in the United States did not live in Texas in 1900, we can subtract the population of Texas from the population of the United States:
Number of people in the United States who did not live in Texas = Population of the United States - Population of Texas
Number of people in the United States who did not live in Texas = 76.1 million - 3.05 million
Number of people in the United States who did not live in Texas = 73.05 million
Therefore, about 73.05 million people in the United States did not live in Texas in 1900.
Answer: 73.05 million people in the United States did not live in Texas in 1900.
Step-by-step explanation:
What is the domain of h(t)= -16t^2 + 112t + 60?
Answer:
The function h(t) = -16t^2 + 112t + 60 is a quadratic function, which means it is defined for all real numbers.
Therefore, the domain of h(t) is the set of all real numbers. In interval notation, we can express this as:
Domain of h(t): (-∞, ∞)
8x -4 > 3x -9 respuesta plis
Answer:
x > -1
Step-by-step explanation:
8x - 4 > 3x - 9
5x - 4 > -9
5x > -5
x > -1
for each triangle find the given side length round to the nearest tenth
The missing side length for the triangle is given as follows:
[tex]x = \frac{16\sqrt{3}}{3}[/tex]
What are the trigonometric ratios?The three trigonometric ratios are the sine, the cosine and the tangent, and they are defined as follows:
Sine of angle = length of opposite side to the angle divided by the length of the hypotenuse.Cosine of angle = length of adjacent side to the angle divided by the length of the hypotenuse.Tangent of angle = length of opposite side to the angle divided by the length of the adjacent side to the angle.For the angle of 60º on the triangle, we have that:
The opposite side is of 16.The adjacent side is of x.The tangent of 60º is equals to the square root of 3, hence the value of x is obtained as follows:
tan(60º) = 16/x
[tex]\sqrt{3} = \frac{16}{x}[/tex]
[tex]x = \frac{16}{\sqrt{3}} \times \frac{\sqrt{3}}{\sqrt{3}}[/tex]
[tex]x = \frac{16\sqrt{3}}{3}[/tex]
Missing InformationThe triangle is given by the image presented at the end of the answer.
More can be learned about trigonometric ratios at brainly.com/question/24349828
#SPJ1