a square object of mass m is constructed of four identical uniform thin sticks, each of length l, attached together. this object is hung on a hook at its upper corner (fig. p14.73). if it is rotated slightly to the left and then released, at what frequency will it swing back and forth?

When observing a full moon rising at sunset, you will see a full moon high in the sky at midnight. The correct answer choice is "a full moon high in the sky"

The Moon is Earth's only natural satellite, and it has been a focus of human interest and observation for a long time. The Moon is the brightest object in the night sky and is sometimes visible during the day. The Moon is thought to have formed around 4.5 billion years ago, shortly after the formation of the Solar System.

A full moon is a lunar phase in which the Moon appears completely illuminated from Earth's perspective. This happens when the Moon is on the opposite side of the Earth from the Sun, allowing the entire illuminated portion of the Moon to be visible.

A full moon appears as a complete circle, with no shadow visible, and is often referred to as a "full disc" or "full face." Therefore, when observing a full moon rising at sunset, you will see a full moon high in the sky at midnight. So, "a full moon high in the sky." is the correct answer.

For more such questions on full moon, click on:

https://brainly.com/question/31276290

#SPJ11

The leading model of galactic recycling that involves gas being blown high above the disk of the galaxy by supernovae and eventually cooling and raining back down into the disk is called the galactic fountain model.

The galactic fountain model describes a cycle in which gas in the disk of a galaxy is heated and ejected by supernovae explosions, which create a hot, low-density gas that rises above the disk. Over time, this gas cools and falls back towards the disk, where it can be used to form new stars and fuel ongoing star formation.

This process is thought to play a key role in regulating the rate of star formation in galaxies, as well as in determining the chemical composition of the interstellar medium. The galactic fountain model has been supported by observations of gas kinematics and chemical abundances in the Milky Way and other galaxies. It is an important framework for understanding the complex interplay between stellar evolution, gas dynamics, and galaxy formation and evolution.

To know more about the Galaxy, here

https://brainly.com/question/13250140

#SPJ4

The wavelength of the wave of speed 35 m/s is 1.75 m.

Wavelength is the distance taken by a wave to cover one complete cycle.

To calculate the wavelength of the wave, we use the formula below

Formula:

Where:

From the question,

Given:

Substitute these values into equation 1

Hence, the wavelength of the  wave is 1.75 m.

Learn more about wavelength here: https://brainly.com/question/28995449

#SPJ1

The sharpest radius of curvature turn that Bubba can drive at this speed before the barrel starts to slide in the bed of the truck is approximately 183.8 meters.

To find the sharpest radius of curvature turn that Bubba can drive at this speed before the barrel starts to slide in the bed of the truck, we need to use the following formula:
f_s ≤ m * a / N
where f_s is the coefficient of static friction (0.296), m is the mass of the barrel, a is the centripetal acceleration, and N is the normal force. Since the barrel is not accelerating vertically, the normal force (N) equals the gravitational force (mg). The centripetal acceleration (a) can be calculated using the formula:
a = v^2 / r
where v is the speed (23.1 m/s) and r is the radius of curvature. Now, we can plug these equations into the inequality:
0.296 ≤ (23.1^2) / (r * g)
where g is the gravitational acceleration (9.81 m/s²). We need to solve for r:
0.296 * r * 9.81 ≤ 23.1^2
2.90176 * r ≤ 533.61
r ≥ 533.61 / 2.90176
r ≥ 183.8 m

The sharpest radius of curvature turn that Bubba can drive at this speed before the barrel starts to slide in the bed of the truck is approximately 183.8 meters.

For more such questions on radius of curvature , Visit:

https://brainly.com/question/29595940

#SPJ11

Answer:

v = 3.61210464965 m/s

Explanation:

∑F = ma

Centripetal acceleration is mv^2/r and the ball is under a force of gravity

[tex]F=ma\\\\mg = \frac{mv^2}{r}\\\\v=\sqrt{gr} \\\\v=\sqrt{(9.81m/s^2)(1.33m)} \\\\v=3.61210464965m/s[/tex]

The minimum velocity that the ball must have to make it around the vertical circle is 3.66 m/s.

When the ball is swung in a vertical circle, there are two forces acting on the ball, which are the gravitational force and the tension force in the string. When the velocity of the ball is minimum, the gravitational force will be equal to the tension force in the string.

The centripetal force is also equal to the gravitational force. This can be expressed mathematically as:

[tex]\frac{mv^2}{R} = mg + T[/tex]

Where m is the mass of the ball, v is its velocity, R is the radius of the vertical circle, g is the acceleration due to gravity, and T is the tension force in the string. Rearranging the formula gives:

[tex]v^2 = Rg + R*(\frac{T}{m})[/tex]

We can see that the minimum velocity of the ball is achieved when T is minimum. At the top of the circle, T is minimum, which means:

[tex]v^2 = Rg[/tex]

So, [tex]v = \sqrt{(Rg)} = \sqt{(1.33 * 9.81)} = 3.66[/tex] m/s

Therefore, the minimum velocity that the ball must have to make it around the vertical circle is 3.66 m/s.

To know more about centripetal force

brainly.com/question/14249440

#SPJ11

A mass-spring system oscillates with a period of 2.2 s. If both the mass and the spring constant are increased by a factor of four, the period of the system will remain the same. Here option B is the correct answer.

The period of a mass-spring system is given by:

T = 2π √(m/k)

where T is the period, m is the mass of the object attached to the spring, and k is the spring constant.

If both the mass and spring constant is increased by a factor of four, the new period can be calculated as:

T' = 2π √(4m/4k) = 2π √(m/k)

Since the mass and spring constant are increased by the same factor, their ratio remains the same, and the expression simplifies to the original equation for the period.

Therefore, the period of the system would remain the same if both the mass and spring constant were increased by a factor of four.

This result can be understood intuitively by considering that increasing the mass would increase the inertia of the system while increasing the spring constant would increase the force required to move the mass. These effects would cancel out and result in the same period of oscillation.

To learn more about spring constant

https://brainly.com/question/20388857

#SPJ4

If a white dwarf gains sufficient mass , it can undergo a type I supernova. This occurs when the white dwarf reaches Chandrasekhar limit, which is approximately 1.4 times mass of the Sun.

If a white dwarf does not gain sufficient mass to undergo a type I supernova, it will eventually cool down and become a black dwarf. A brown dwarf is a failed star that is not massive enough to undergo nuclear fusion in its core, and so it emits very little light or heat.

A type II supernova occurs when a massive star runs out of fuel and its core collapses, leading to a catastrophic explosion. This is distinct from a type I supernova, which involves a white dwarf.

To know more about catastrophic explosion, here

brainly.com/question/24321216

#SPJ4

Jupiter mass planets that are found close to their parent stars are called Hot Jupiters. These are a type of exoplanet, or a planet that orbits a star outside of our solar system. Hot Jupiters are characterized by their large mass, similar to Jupiter, and their close proximity to their host stars, which results in high temperatures.

In comparison to the other options:

1. Super-Earths are planets with a mass greater than Earth's but smaller than Uranus or Neptune. They can be found in various distances from their stars and do not necessarily have Jupiter-like masses.

2. Goldilocks planets, also known as habitable zone planets, are exoplanets that orbit their stars in a range where conditions might be suitable for life as we know it, with temperatures allowing for the presence of liquid water. These planets can be of various sizes and masses, not specifically Jupiter-sized.

3. Cold Jupiters are gas giants that orbit their stars at a greater distance, similar to how Jupiter orbits our Sun. They have lower temperatures due to their distance from their host stars.

To Learn More About Jupiters

https://brainly.com/question/30192826

#SPJ11

Quantum mechanics uses a mathematical structure called a wave function to describe the state of a system, while classical mechanics use a set of variables, such as position and momentum.

This is how quantum mechanics differs from classical mechanics in the way the state of a physical system is represented mathematically. Instead of describing the exact state of a particle, the wave function explains the probability of finding a particle in a given state.

The principle of superposition states that particles have no apparent state until they are detected, which alludes to its theoretical importance. It affects how we perceive the fabric of reality and how small entities behave.

Learn more about quantum mechanics at

https://brainly.com/question/11855107

#SPJ4

C) Tiny echoes bounce back to the dolphin.

When a dolphin makes a sound, it travels through the water in the form of sound waves. If these sound waves encounter an object, such as a fish or a rock, some of the sound waves will bounce back towards the dolphin in the form of echoes.

What is Sound?

Sound is a type of energy that is produced by the vibration of matter. When an object vibrates, it creates pressure waves that travel through a medium, such as air, water, or solid materials. These waves consist of alternating high and low pressure areas, and are detected by our ears as sound.

This process is known as echolocation, and it is used by dolphins and other animals to navigate, locate prey, and communicate with other members of their species. Dolphins are able to analyze the echoes that bounce back to them to determine the size, shape, and distance of objects in their environment. This ability allows them to hunt and move around in their underwater habitat with great precision, even in conditions of low visibility or darkness.

Learn more about Sound from the given link

https://brainly.com/question/1199084

#SPJ1

Answer:

1.> 374$

2.> in between the age 21 - 64

3.> The data represented above shows the cost of health insurance for each age group where we can clearly see the smooth increase in cost as the age gets bigger.

4.> The graph above shows relation of age with the cost so most likely it will be the same for cars as aging also applies to vechiles.

5.> The graph will follow the same rate of increasement as it goes on and on.

1 - Incident ray

2 - Refracted ray

3 - Angle of incidence

4 - Angle of refraction

Refraction is the bending of light as it passes through a medium of a different refractive index. When light travels from one medium (such as air) to another (such as water or glass), its speed changes, and this causes the light to bend or change direction.

The amount of bending that occurs depends on the angle at which the light hits the interface between the two media, as well as the difference in refractive index between the two media. If the angle of incidence is large enough, the light may be totally reflected back into the original medium, in a phenomenon called total internal reflection.

Learn more about refraction:https://brainly.com/question/14760207

#SPJ1

The distance between two adjacent nodes of the standing wave is approximately 0.0947 m.

The distance between two adjacent nodes of a standing wave on a string can be calculated using the formula:

d = λ/2

where d is the distance between two adjacent nodes, and λ is the wavelength of the wave.

We can calculate the wavelength of the wave using the formula:

v = f λ

where v is the velocity of the wave, f is the frequency of the wave, and λ is the wavelength of the wave.

Substituting the given values, we get:

λ = v/f

λ = 89 m/s / 470 Hz

λ = 0.1894 m

Now, we can calculate the distance between two adjacent nodes as:

d = λ/2

d = 0.1894 m / 2

d = 0.0947 m

Therefore, the distance between two adjacent nodes of the standing wave is approximately 0.0947 m.

For such more question on standing wave:

https://brainly.com/question/2292466

#SPJ11

Answer:

ν = 4.17×10⁻¹⁶ Hz

Explanation:

c = λν

λ is the wavelength, ν is the frequency, c is the speed of light

ν = λ/c

ν = (125×10⁻⁹m) / (3×10⁸ m/s)

ν = 4.17×10⁻¹⁶ Hz

Ultraviolet electromagnetic wave

The frequency of an electromagnetic wave with a wavelength of 125 nm is 2.4 x 10^15 Hz. The type of electromagnetic wave is Ultraviolet.

What is an electromagnetic wave?

An electromagnetic wave is a type of wave that is created by the movement of charged particles in the environment. Electromagnetic waves travel through space or other materials, like air or water, and can have different wavelengths and frequencies. These waves can travel at the speed of light, and they can be used for many different purposes, including communication, navigation, and medical imaging.

What is wavelength?

The wavelength of a wave is the distance between two consecutive crests or troughs of a wave. It is usually measured in meters, but it can also be expressed in other units, like nanometers (nm) or micrometers (μm). The wavelength of a wave determines its frequency, which is the number of cycles per second that the wave completes.

What type of electromagnetic wave is this?

The electromagnetic wave with a wavelength of 125 nm is an Ultraviolet wave. Electromagnetic waves with wavelengths shorter than 400 nm are known as ultraviolet (UV) waves. They are produced by the sun and can be harmful to living organisms in high doses, but they are also used in many applications, such as sterilization, medical treatment, and fluorescent lighting.

To know more about electromagnetic wave click here:

brainly.com/question/29774932

#SPJ11

When a volleyball is held beneath the surface of water, it will have more buoyant force than if it is floating. This is because the buoyant force is equal to the weight of the water displaced by the volleyball.

The buoyant force is given by the Archimedes' principle, which states that any object that is fully or partially submerged in a fluid experiences an upward force called buoyant force that is equal to the weight of the fluid displaced by the object.

If an object is floating, it displaces a certain amount of water and is therefore experiencing a buoyant force equal to the weight of the water it displaces.

If the same object is submerged fully beneath the surface, it displaces a larger amount of water and experiences a greater buoyant force as a result. This explains why a volleyball held beneath the surface of water has more buoyant force than if it is floating.

For more such questions on buoyant force, click on:

https://brainly.com/question/29102598

#SPJ11

During the Scientific Revolution, astronomer and mathematician Nicolaus Copernicus' book "On the Revolutions of the Heavenly Spheres" directly challenged the ideas in the book  "Almagest" by Claudius Ptolemy.

In the scientific revolution, Nicolaus Copernicus' book on the revolutions of the heavenly spheres would have directly challenged the ideas in the previous book which was Ptolemy's Almagest.

Copernicus challenged the geocentric model of the universe, which was the dominant view at the time, and replaced it with the heliocentric model, which stated that the sun, rather than the earth, was the center of the universe.

This directly challenged the ideas put forth in Ptolemy's Almagest, which had been the standard text on astronomy for over a thousand years.

For more such questions on Scientific Revolution, click on:

https://brainly.com/question/16918035

#SPJ11

When a transparency sheet is rubbed with a tissue and the transparency and tissue are then held at rest a short distance apart the two objects exert electric forces on each other because electrons are rubbed off of one and onto the other. The correct option is "the two objects exert electric forces on each other, because electrons are rubbed off of one and onto the other."

When a transparency sheet is rubbed with a tissue, the two objects develop electric charges. The tissue becomes negatively charged as a result of this rubbing because electrons are transferred from the transparency sheet to the tissue.

As a result, the transparency sheet becomes positively charged. These charges create electric forces that cause the two objects to be attracted to one other.

As a result, they exert electric forces on each other. Therefore, the most appropriate answer to the given question is that the two objects exert electric forces on each other because electrons are rubbed off of one and onto the other.

For more such questions on electric force, click on:

https://brainly.com/question/25923373

#SPJ11

A magnetic field increases from 0 to 0.37 t in 1.5 s . 2917  turns of wire are needed in a circular coil 13 cm in diameter to produce an induced emf of 7.5 v

To find the number of turns of wire needed in the circular coil, we'll use Faraday's law of electromagnetic induction:
emf = -N x (ΔB x A) / Δt
Where emf is the induced electromotive force (7.5 V), N is the number of turns of wire, ΔB is the change in magnetic field (0.37 T), A is the area of the circular coil, and Δt is the time taken (1.5 s).
First, let's find the area of the circular coil:
A = π x [tex](d/2)^2[/tex]
A = π x [tex](0.13 \:m / 2)^2[/tex]
A ≈ 0.0132 m²
Now, we'll rearrange Faraday's law equation to solve for N:
N = -emf x Δt / (ΔB x A)
N = -7.5 V x 1.5 s / (0.37 T x 0.0132 m²)
N ≈ -14.25 / 0.004884
N ≈ 2916.57
Since the number of turns of wire must be a whole number, we can round it up to the nearest whole number:
N ≈ 2917 turns

For similar question on turns of wire

https://brainly.com/question/16744082

#SPJ11

To solve problems involving waves, it's important to know the relationships between frequency, wavelength, and speed, which are given by the formulas v = f λ and T = 1/f, where v is the speed of the wave, f is the frequency, λ is the wavelength, and T is the period of oscillation.

The period of the tree is T=1/f= 1/58.0 Hz = 0.0172 s.

The wavelength of the wave is λ = 2 (crest to trough distance) = 2 (3.4 m)  = 6.8 m.

The speed of the sound wave is v = f λ = (285 Hz) (1.5 m) = 427.5 m/s.

The distance to the other side of the canyon is d = (speed of sound) × (time for echo to return) / 2 = (336.0 m/s) × (5.5 s) / 2 = 924 m.

The wavelength of the radio waves emitted by WKLB is λ = c / f = 3 x 10^8 m/s / 97.1 x 10^3 Hz = 3.09 m.

The speed of the water waves is v = λ / T = (7 m) / (3 s) = 2.33 m/s.

The wavelength of the water waves is λ = v T = (2.9 s) (2.33 m/s) = 6.74 m.

The frequency of the pulses is f = 1/T = 1/0.84 s = 1.19 Hz.

The speed of the wave is v = λ / T = (1.9 cm) / (0.95 s) = 2 cm/s.

The frequency of the sound wave is f = v / λ = 340 m/s / 2.3 x 10^-3 m = 1.48 x 10^5 Hz.

The speed of sound in air at 29.2°C is v = 331 m/s + (0.6 m/s/°C) × (29.2°C) = 349.5 m/s.

The wavelength of the sound wave is λ = v / f = (331 m/s + (0.6 m/s/°C) × (7.9°C)) / (40.7 Hz) = 8.06 m.

Learn more about wavelength here:

https://brainly.com/question/31143857

#SPJ1

The student needs to add 150 units of hot chocolate mix to 100 units of water to make a 60% solution of hot chocolate.

What is Solution?

Solutions can be made of different states of matter such as gases, liquids, and solids. The concentration of the solute in a solution can be expressed in different ways, including mass percentage, mole fraction, and molarity.

Let x be the number of units of hot chocolate mix needed to make a 60% solution.

We know that the final volume of the solution will be 100 + x units.

Since the solution is 60% hot chocolate mix, we can set up the following equation:

x / (100 + x) = 0.6

Multiplying both sides by (100 + x), we get:

x = 0.6 (100 + x)

Distributing the 0.6, we get:

x = 60 + 0.6x

Subtracting 0.6x from both sides, we get:

0.4x = 60

Dividing both sides by 0.4, we get:

x = 150

Learn more about Solution from given link

https://brainly.com/question/25326161

#SPJ1

Change in momentum can be calculated by knowing values including the magnitude of force, amount of time, and object's starting velocity.

With a constant force, we can calculate the change in momentum of an object by knowing the following values:

If we know these numbers, we can apply the following formula to determine the object's change in momentum:

Δp = FΔt

Where Δp is the change in momentum, F is the magnitude of the force, and Δt is the time duration for which the force is applied to the object.

Note that if the object is initially at rest, then the initial momentum of the object is zero, and we can simplify the formula to:

Δp = mv

where m is the mass of the object, and v is the final velocity of the object after the force has been applied for time Δt.

To learn more about momentum, refer to:

https://brainly.com/question/1042017

#SPJ4

1 - Incident ray

2 - Refracted ray

3 - Angle of incidence

4 - Angle of refraction

The bending of light as it travels through a medium with a varied refractive index is known as refraction. The speed of light changes as it moves from one medium, like air, to another, like water or glass. This causes the light to bend or change direction.

The angle at which the light strikes the interface between the two media and the disparity in refractive indices between the two media determine how much bending takes place. Total internal reflection is a phenomena where all of the light is completely reflected back into the original medium if the angle of incidence is large enough.

Learn more about refraction:brainly.com/question/14760207

#SPJ1

The partial pressure of gas x will be lower than gas y after 2.25 hours (2 hours and 15 minutes).Therefore, option C is correct.

Yes, the partial pressure of gas x will be lower than gas y after 2.25 hours (2 hours and 15 minutes).[tex]What is the given information in the problem[/tex]?The following information is given in the problem:Two gases x and y are found in the atmosphere in only trace amounts because they decompose quickly.The half-life of x is 0.75 hThe half-life of y is 90 min (1.5 h)The initial partial pressure of x is 3 times greater than yThe total volume of the flask is 5.0 L.[tex]How can we approach the problem?[/tex]We will use the half-life formula and the partial pressure formula to solve the problem.The half-life formula is:t1/2 = 0.693/kHere, k is the first-order rate constant.The partial pressure formula is:P = nRT/VHere,P is the partial pressuren is the number of molesR is the universal gas constantT is the temperatureV is the volume of the flask.Method:First, we will find the first-order rate constant k for both gases using the half-life formula.Then, we will use the partial pressure formula to find the number of moles of both gases x and y in the flask using the given partial pressure and the total volume of the flask.Finally, we will use the first-order rate constant and the number of moles to find the partial pressure of gases x and y at a given time.Let's solve the problem.Steps:1. Find the first-order rate constant k for gas x.t1/2 (x) = 0.75 hUsing the half-life formula,t1/2 = 0.693/kk(x) = 0.693/t1/2 (x)k(x) = 0.693/0.75k(x) = 0.924 h-12. Find the first-order rate constant k for gas y.t1/2 (y) = 90 min = 1.5 hUsing the half-life formula,t1/2 = 0.693/kk(y) = 0.693/t1/2 (y)k(y) = 0.693/1.5k(y) = 0.462 h-13. Find the initial number of moles of gas x in the flask.Partial pressure of x = 3 * Partial pressure of yP(x) = 3 * P(y)P(x) = (3/4) * Total pressure of x and yP(y) = Total pressure of x and yP(x) + P(y) = Total pressure of x and yLet's assume that the total pressure of x and y is P0.P0 = P(x) + P(y)P(x) = (3/4) * P0P(y) = (1/4) * P04. Find the initial number of moles of gas y in the flask.P(y) = n(y)RT/Vn(y) = P(y) * V/RTn(y) = [(1/4) * P0 * 5.0 L] / [(0.0821 L atm K-1 mol-1) * (298 K)]n(y) = 0.062 mol5. Find the initial number of moles of gas x in the flask.P(x) = n(x)RT/Vn(x) = P(x) * V/RTn(x) = [(3/4) * P0 * 5.0 L] / [(0.0821 L atm K-1 mol-1) * (298 K)]n(x) = 0.186 mol6. Find the partial pressure of gas x after 1 hour.P(x, 1 h) = n(x)k(x)tP(x, 1 h) = (0.186 mol) * (0.924 h-1) * (1 h)P(x, 1 h) = 0.171 atm7. Find the partial pressure of gas y after 1 hour.P(y, 1 h) = n(y)k(y)tP(y, 1 h) = (0.062 mol) * (0.462 h-1) * (1 h)P(y, 1 h) = 0.028 atm8. Find the partial pressure of gas x after 2 hours.P(x, 2 h) = n(x)k(x)tP(x, 2 h) = (0.186 mol) * (0.924 h-1) * (2 h)P(x, 2 h) = 0.342 atm9. Find the partial pressure of gas y after 2 hours.P(y, 2 h) = n(y)k(y)tP(y, 2 h) = (0.062 mol) * (0.462 h-1) * (2 h)P(y, 2 h) = 0.049 atm10. Find the partial pressure of gas x after 2.25 hours.P(x, 2.25 h) = n(x)k(x)tP(x, 2.25 h) = (0.186 mol) * (0.924 h-1) * (2.25 h)P(x, 2.25 h) = 0.383 atm11. Find the partial pressure of gas y after 2.25 hours.P(y, 2.25 h) = n(y)k(y)tP(y, 2.25 h) = (0.062 mol) * (0.462 h-1) * (2.25 h)P(y, 2.25 h) = 0.052 atmConclusion:Yes.

Learn more about Two gases here:

https://brainly.com/question/28778069

#SPJ4

The current in the upper loop can be identified as a clockwise current from above (i.e., clockwise)  before the switch is closed. This statement is justified using the Fleming’s right-hand rule.

Fleming's right-hand rule is a method to determine the direction of the force acting on a current-carrying conductor in a magnetic field.

The direction of the force on the conductor is given by the thumb of the right hand, the direction of the current in the conductor is given by the first finger, and the direction of the magnetic field is given by the second finger.

To determine the current direction, we must establish the polarity of the battery, as shown in the image below, and the polarity of the induced electromotive force (emf).

We must ensure that the magnetic field and the induced emf in the coil are both pointing downwards, as shown in the image below. We can now use the Fleming's right-hand rule to determine the direction of the current in the upper loop, which is clockwise from above.

For more such questions on current, click on:

https://brainly.com/question/22971286

#SPJ11

The frequency of the horn is 315.5 Hz.What are automobiles.Automobiles are vehicles that are designed to be driven on roads and have four wheels.

They are commonly known as cars in the United States and Canada. Cars, buses, lorries, and trucks are all types of automobiles that can transport people or cargo from one place to another. What is a beat frequency? When two waves with slightly different frequencies interfere, a beat frequency is produced. The beat frequency is the difference between the two waves' frequencies. It's possible to hear beat frequencies. The difference between two frequencies is the beat frequency. The beat frequency is equal to the absolute value of the difference between the two frequencies. There are two cars, one of which is stationary and the other of which is moving towards the first car at 15 m/s. When the driver at rest hears a beat frequency of 5.5 Hz, both automobiles are fitted with the same single frequency horn. Determine the frequency of the horn. Here's how to go about it: Using the formula, we can determine the frequency of the horn as follows:f1 = (f beat + f2)/2We know that: f beat = 5.5 Hzandf2 = v/(λ + vs)Where: v = 15 m/sλ = wavelength of the sound of the horn at rest, that is, when the car is stationary = speed of sound/frequency = 343/ f2vs = relative velocity of sound with respect to the moving vehicles = (v)/(v + us) where us is the speed of sound .The frequency of the horn is:f1 = (5.5 + v/(λ + vs))/2f1 = (5.5 + 15/(343/ f2 + v/(v + us)))/2f1 = 315.5 H

Learn more about Automobiles are vehicles here:

https://brainly.com/question/26477083

#SPJ4

The diver was 10.425m deep when they came to a stop and the rate of acceleration in the water was [tex]-9.4m/s^2[/tex].

Given the height of springboard from water (h) = 10m

Time after which the diver comes to a stop = 1.5s

Let the depth the diver reached in water = d

The final velocity after he reaches the depth (v) = 0m/s

Lett the speed of diver after free fall until he reaches water = um/s

According to Newtons laws of motion we know that [tex]v^2 - u^2 = 2gh[/tex]where g is the acceleration due to gravity = [tex]9.8m/s^2[/tex] then:

[tex]0^2 - u^2 = 2*(-9.8)*(10)[/tex]

[tex]u^2 = 196 \\u = \sqrt{196} = 14m/s[/tex]

The initial velocity with which the diver reaches water surface = 14m/s

The rate of acceleration in the water can be calculated using the equation:

a = (Vf - Vi) / t where Vf is the final velocity, Vi is the initial velocity, and t is the time it takes for the diver to come to a stop.

[tex]a = (0 - 14)/1.5 = -9.4 m/s^2[/tex]

Then  the distance the diver travelled in water before coming to rest is calculated as below:

[tex]s = ut + 1/2at^2[/tex] then:

[tex]d = 14 * 1.5 - 1/2 * (-9.4) * 1.5 * 1.5[/tex]

d = 21 - 10.575 = 10.425m

Therefore, the depth of the diver when they came to a stop was 10.425m

To learn more about acceleration click here https://brainly.com/question/12550364

#SPJ1

Current flowing through the circuit when the switch is closed will be I = 10V/30 ohms = 1/3 A (0.333 A)

The potential difference across the 20 ohm resistor is equal to the voltage of  battery, 10V. According to Ohm's law,  current flowing through the circuit will be determined by the total resistance in the circuit and the voltage supplied by the battery.

So, the current flowing through the circuit when the switch is closed will be I = 10V/30 ohms = 1/3 A (0.333 A). This same current of 1/3 A will flow through the 20 ohm resistor as well, as there is only one path for the current to flow through the circuit.

To know more about Ohm's law, here

brainly.com/question/12372387

#SPJ4

Through the block of aluminum material, Mattie will most likely find that sound travels the fastest.

The correct answer is block of aluminum.

The speed of sound in a medium refers to the rate at which sound waves propagate through the medium. When you bang a drum, the sound waves produced move through the air until they reach your ears, allowing you to hear the sound.

The speed of sound varies depending on the medium through which it passes. In solids and liquids, sound travels faster than in gases.

Mattie wants to measure the speed of sound through different materials, and she planned to use the table shown to record data. The table below shows the speed of sound through different materials. Material Speed of Sound Block of aluminum 6,000 m/s Balloon filled with air 340 m/s Tank filled with water 1,500 m/s Tank filled with oil 1,200 m/s

Therefore, through the block of aluminum material, Mattie will most likely find that sound travels the fastest.

For more such questions on sound, click on:

https://brainly.com/question/27951129

#SPJ11

The near point of this person's vision is approximately 36.36 cm. So the near point will be option 40 cm.

If we have to find the near point of a person's vision, we need the closest distance at which an object can be brought into focus on the retina.

Here about this case, a nearsighted person has her vision corrected using a 2.75-diopter contact lens. This means that the image is shifted forward and brought into focus on the retina.

The formula for near point of an eye is:

Near point = 1/f

where f is the power of the lens in diopters.

So, the near point of the nearsighted person with the 2.75-diopter contact lens is:

Near point = 1/2.75

Near point = 0.3636 meters = 36.36 cm

Therefore, the near point of the person's vision is approximately 36.36 cm, which is closest to the option 40 cm.

Learn more about near point:

https://brainly.com/question/13095884

#SPJ4