a solution made with of a triprotic acid ( , ; ; ) dissolved in of solution, was titrated with . answer the following question about the of the solution, during this titration experiment: what is the ph of the solution when you have added of naoh solution?

The equilibrium constant for the reversible reaction in aqueous medium is 88.

In order to determine the equilibrium constant for the reversible reaction in aqueous medium given that respective concentrations of A, B, C, and D are 0.0117 M, 0.00440 M, 0.00550 M, and 0.00780 M, we can use the equilibrium constant expression:

Kc = [tex][C]^{2} [D]^{3} / [A]^{3} [B]^{3}[/tex]

where [A], [B], [C], and [D] are the molar concentrations of the species involved in the reaction.

Substituting the concentration values into the equilibrium constant expression:

Kc =[tex](0.00550 M)^{2} (0.00780 M)^{3} / (0.0117 M)^{3} (0.00440 M)^{3}[/tex]

Kc = 87.8.

The equilibrium constant for the reversible reaction in aqueous medium is 88 (to the nearest whole number).

To learn more about equilibrium constant; https://brainly.com/question/3159758

#SPJ11

using many methods I gess I am not good at drawing

The basicity of the acid is equal to the number of moles of NaOH that reacted with one mole of acid. Since we know that 0.00025 moles of NaOH reacted with 0.01873 moles of acid.

What is Neutralization?

Neutralization is a chemical reaction that occurs when an acid and a base react with each other to form a salt and water. In this reaction, the hydrogen ions (H+) from the acid combine with the hydroxide ions (OH-) from the base to form water (H2O), and the remaining ions combine to form a salt. The resulting solution will have a pH that is closer to neutral (pH 7) than either the original acid or base.

First, let's calculate the number of moles of NaOH used in the reaction:

10 mL NaOH x (1 L / 1000 mL) x (1/2) x (1 mol NaOH / 20 mL N/2 HCl) = 0.00025 mol NaOH

Since the acid and NaOH react in a 1:1 ratio, this means that there were also 0.00025 moles of acid used in the reaction.

Next, we can use the mass of the acid and its molecular weight to calculate the number of moles of acid:

2.362 g acid x (1 mol acid / 126 g acid) = 0.01873 mol acid

Since the acid and NaOH react in a 1:1 ratio, we know that there were 0.01873 moles of NaOH used in the reaction.

After the reaction, the solution was diluted to a total volume of 250 mL. This means that the concentration of the acid in the diluted solution is:

0.01873 mol / 0.25 L = 0.07492 M

Finally, we can use the information about the neutralization of the diluted solution to calculate the basicity of the acid:

10 mL diluted solution x (1 L / 1000 mL) x (1/10) x (1 mol acid / 1 mol H+) = 0.001 mol acid

This means that the 10 mL of diluted solution contained 0.001 moles of acid. Since the concentration of the diluted solution is 0.07492 M, the volume of the 10 mL of diluted solution contains:

0.001 mol / 0.07492 mol/L = 0.01335 L = 13.35 mL

This means that the 10 mL of diluted solution contains 13.35 mL of the original acid solution. Since the original acid solution was diluted from 50 mL to 250 mL, this means that the 13.35 mL of the original acid solution corresponds to:

13.35 mL x (50 mL / 250 mL) = 2.67 mL of the original acid solution

Therefore, the 2.67 mL of the original acid solution contained 0.001 moles of acid, which corresponds to a concentration of:

0.001 mol / 0.00267 L = 0.3745 M

The basicity of the acid is equal to the number of moles of NaOH that reacted with one mole of acid. Since we know that 0.00025 moles of NaOH reacted with 0.01873 moles of acid, the basicity of the acid is:

0.00025 mol NaOH / 0.01873 mol acid = 0.01336

Therefore, the basicity of the acid is 0.01336.

Learn more about  Neutralization from given link

https://brainly.com/question/23008798

#SPJ1

Answer: The number of atoms in the peptide backbone that are linked together to form one turn of the alpha helix axis is 3.1415.

The α-helix is a secondary structure motif that is found in proteins. The helix is stabilised by hydrogen bonds between the carbonyl oxygen atom of one amino acid residue and the amide hydrogen atom of the amino acid four residues downstream.

The α-helix is a right-handed helix that has approximately 3.6 amino acid residues per turn of the helix, with a helix rise of 0.15 nm and a helix pitch of 0.54 nm. The alpha helix is composed of a sequence of amino acids that form a spiral structure, which is held together by hydrogen bonds.

The main chain atoms of the α-helix make a screw-like pattern, and this helical pattern is produced by the carbonyl group of every nth amino acid that donates a hydrogen bond to the nitrogen atom of the (n+4)th amino acid, resulting in a tightly coiled backbone structure.

This backbone of the α-helix is a repeating pattern of atoms, with a pitch of 5.4 Å along the helix axis.

Learn more about helix axis here:

https://brainly.com/question/14775670#


#SPJ11

NaOH is a strong base and completely dissociates in water. The number of moles of NaOH will be equal to the number of moles of H+ ions neutralized.  Hence, 99 ml of NaOH must be added.

It measures the acidity or basicity of a solution on a scale of 0 to 14. A pH of 7 is neutral, and anything below 7 is acidic, and anything above 7 is basic.

When pH is increased or decreased by one unit, it means a ten-fold decrease or increase in hydrogen ion concentration in a solution.Acid and base are two essential terms to learn here.

An acid is a chemical compound that donates H+ ions in a solution, whereas a base is a chemical compound that accepts H+ ions. These H+ ions determine the acidity of the solution.

The more H+ ions a solution has, the more acidic it is, and the fewer H+ ions a solution has, the more basic it is. A pH of 2 indicates that the solution is highly acidic.

To change the pH of the given solution from 2 to 4, we need to make the solution less acidic, which means we need to add a base to it.

Let the volume of the base we need to add be x ml.The pH of the new solution will be 4. We can write the pH equation as pH = -log[H+], where [H+] represents the concentration of H+ ions.

The concentration of H+ ions in the initial solution is:2 = -log[H+]. Hence, [H+] = 0.01 M.The concentration of H+ ions in the final solution is:4 = -log[H+].

Hence, [H+] = 0.0001 M.We know that[H+] = Acid concentration = Base concentration.Hence, the concentration of NaOH added to the solution will be 0.01 M - 0.0001 M = 0.0099 M.

NaOH is a strong base and completely dissociates in water. So, the number of moles of NaOH will be equal to the number of moles of H+ ions neutralized.

The volume of NaOH needed to achieve this concentration:0.0099 mol/L = n NaOH / V NaOHn NaOH = 0.0099 mol/L x (10 mL + x) = 0.099 molV NaOH = n NaOH / 0.1 mol/L = (0.0099 mol) / (0.1 mol/L) = 0.099 L = 99 ml

Hence, 99 ml of NaOH must be added to 10 ml of a solution of HCl with a pH of 2 to change the pH to 4.

to know more about neutralized refer here:

https://brainly.com/question/27891712#

#SPJ11

We can use the ideal gas law to find out the pressure of the gas.

★ PV = nRT

★P = nRT/V

Where P is the pressure in atm, V is the volume in liters, n is the number of moles, R is the ideal gas constant (0.0821 L atm/mol K), and T is the temperature in Kelvin.

We are given-

On substituting the values -

→ P = ( 6 × 0.0821×366.5)/41.7

→ P = 180.54/41.7

→ P =4.33 atm

→ P = 4.33×101.3 KPa

→P = 438.629 KPa

Henceforth, the pressure of the gas is 438.629 KPa.

It is important to include reactions that contain the substrate but not the enzyme in your kinetic analysis to understand the substrate's effect on the reaction rate, independent of the enzyme.

It is a good idea to include reactions that contain substrate but not enzyme in your kinetic analysis because doing so will provide you with a control sample that will assist you in calculating the rate of reaction in the absence of enzyme. Therefore, the rate of reaction produced by this reaction will provide a benchmark against which the rate of reaction of the test sample containing enzyme can be measured.

Additionally, by including reactions that contain substrate but no enzyme, it is possible to measure the effects of other factors on the reaction rate. These factors may include temperature, pressure, pH, and the presence of inhibitors and activators.

In summary, including reactions that contain substrate but no enzyme in your kinetic analysis will enable you to quantify the effect of enzyme activity on the rate of reaction and understand the impact of other factors on the reaction rate.

Learn more about kinetic analysis at https://brainly.com/question/31106231

#SPJ11

The given statement "at a given temperature and pressure, the volume of a gas is directly proportional to the amount of gas present" is a rephrasing of Avogadro's law.

Avogadro's law is a gas law named after Amedeo Avogadro, an Italian scientist who first presented it in 1811. It states that "equal volumes of all gases, at the same temperature and pressure, have the same number of molecules.

This means that if the amount of gas present is doubled, the volume will also double, provided that the temperature and pressure remain the same.

Therefore, at a given temperature and pressure, the volume of a gas is directly proportional to the amount of gas present. This is a statement of Avogadro's Law.

To know more about Avogadro's law click here:

https://brainly.com/question/3491421

#SPJ11

Metals have a high theoretical strength, but their actual strength is usually lower. This is because metals are made up of individual grains or crystals, which are all slightly misaligned with each other.

During loading, these misalignments create slip planes which concentrate the applied stress, leading to the material yielding (or deforming plastically) before it breaks.

Other causes of the reduced actual strength are stress corrosion cracking, fatigue, and defects like inclusions and grain boundaries.

The actual strength of a metal is affected by the grain size and the volume fraction of grain boundaries, as the grain boundaries are weaker than the grains themselves.

The shape and distribution of the grains also influence the strength, as the misalignments of the grains affect how stress is distributed in the material.

The microstructural features, such as the presence of inclusions, can affect the strength. Finally, the chemical composition and heat treatment of the metal can also have a great effect on the strength.

The actual strength of metals is lower than their theoretical strength due to the misalignments between grains, the presence of grain boundaries, stress corrosion cracking, fatigue, and microstructural features like inclusions.

Heat treatment and chemical composition can also affect the strength of metals.

to know more about metal refer here:

https://brainly.com/question/28650063#

#SPJ11

An ion with a positive charge is called a cation, whereas an ion with a negative charge is called an anion.

An ion with a positive charge is called a cation, whereas an ion with a negative charge is called an anion. Ions are atoms or molecules that have lost or gained one or more electrons, giving them a positive or negative charge. Ions play a crucial role in many chemical reactions and are found in a variety of materials.

Ions are classified as cations and anions based on their charge.

Cations: Cations are ions that have lost one or more electrons and have a positive charge. Sodium ion (Na+) is an example of a cation. Sodium atoms lose one electron, giving them a positive charge.

Anions: Anions are ions that have gained one or more electrons and have a negative charge. Chloride ion (Cl-) is an example of an anion. Chlorine atoms gain an electron, giving them a negative charge.

Thus, an ion with a positive charge is called a cation, whereas an ion with a negative charge is called an anion.

For more such questions on ion , Visit:

https://brainly.com/question/22530066

#SPJ11

The activation energy of the reaction, given that the rate constant has tripled when the temperature rose from 25 °C to 65 °C, is 42.6 kJ/mole.


Activation energy is the minimum energy required for a reaction to take place. It is calculated using the Arrhenius equation, which states that the rate constant, k, is proportional to the exponential of negative activation energy (Ea) divided by the gas constant (R) multiplied by the absolute temperature (T).

As the rate constant has tripled when the temperature increased, the activation energy can be calculated as Ea = -R * (1/T2 - 1/T1).

Plugging in the given temperature values of 25 °C and 65 °C and the gas constant, R, the activation energy is 42.6 kJ/mole.

To know more about rate constant click on below link:

https://brainly.com/question/14977272#

#SPJ11

Robert Boyle helped dispel the ancient Greek theory of the four elements, which stated that all matter was made up of earth, air, fire, and water.  

Boyle's experiments with gases led to the development of the modern concept of an element as a fundamental substance that cannot be broken down into simpler substances.

The tray of ice will weigh the same as the starting tray of water. This is because the mass of the water is conserved during the freezing process. Although the water changes from a liquid to a solid state, the total earth amount of matter remains the same.

Ice melting is a physical change. A physical change is a change that does not result in the formation of a new substance with different chemical properties. When ice melts, it simply changes from a solid to a liquid state, but the chemical composition of the water remains the same.

Intensive properties are properties that do not depend on the amount of matter present. Examples include temperature, density, and color. Extensive properties, on the other hand, depend on the amount of matter present. Examples include mass, volume, and energy. In other words, if you double the amount of matter present, the value of an extensive property will also double, but the value of an intensive property will remain the same.

Learn more about chemical composition here

https://brainly.com/question/678196

#SPJ1

The compound that has a boiling point closest to that of Argon is HF. This is because HF has the strongest intermolecular forces (hydrogen bonding) among the given compounds.

The boiling point of a compound depends on the strength of the intermolecular forces that exist between the molecules. The stronger the intermolecular forces, the higher the boiling point.

The weaker the intermolecular forces, the lower the boiling point. The boiling point of Argon is -186°C. Out of the given compounds, the boiling point of HF is the closest to the boiling point of Argon.

The boiling point of HF is -83.8°C. This is because HF has hydrogen bonding which is the strongest intermolecular force among the given compounds. The other compounds such as Cl2, F2, HCl, and NaF, have weaker intermolecular forces than HF. Therefore, they have a lower boiling point than HF.

Learn more about HF here:

https://brainly.com/question/14581360#


#SPJ11

Answer: To solve this problem, we need to use the Avogadro's number, which represents the number of particles (molecules or atoms) in one mole of a substance. The Avogadro's number is approximately 6.022 x 10²³ particles per mole.

First, we need to calculate the number of moles of CO₂ molecules in 2.5 x 10²⁵ molecules:

n = N/N_A

where:

n = number of moles

N = number of molecules

N_A = Avogadro's number

n = 2.5 x 10²⁵ / 6.022 x 10²³

n = 41.56 mol

Next, we can use the molar mass of CO₂ to convert moles to grams. The molar mass of CO₂ is approximately 44 grams per mole.

m = n x M

where:

m = mass in grams

n = number of moles

M = molar mass

m = 41.56 mol x 44 g/mol

m = 1826.24 g

Therefore, there are approximately 1826.24 grams in 2.5 x 10²⁵ CO₂ molecules.

enjoy!

Explanation:

The pH of the solution that is made by combining 55 ml of 0.040 m hydrofluoric acid with 125 ml of 0.100 m sodium fluoride is equal to 4.71.

Figure out the amount of hydrogen ions (H+) in the solution in order to compute the pH of the solution. This may be accomplished by taking into account the acid-base equilibrium between fluoride ions (F-), the conjugate base of hydrofluoric acid (HF), and the acid.

First, let's find the moles of (HF) and (NaF) in the solution:

Moles of HF = volume (in L) × concentration (in M)

= 0.055 L × 0.040 M

= 0.0022 moles

Moles of NaF = volume (in L) × concentration (in M)

= 0.125 L × 0.100 M

= 0.0125 moles

The common ion concentration of F⁻ in the solution must then be determined. This is as a result of the existence of sodium fluoride and hydrofluoric acid, both of which contain fluoride ions:

Common ion concentration of F⁻ = moles of F⁻ / total volume (in L)

= (0.0022 moles + 0.0125 moles) / (0.055 L + 0.125 L)

= 0.0147 moles / 0.180 L

= 0.0817 M

Next, set up the equilibrium expression for the acid dissociation of (HF):

HF ⇌ H⁺ + F⁻

The hydrofluoric acid dissociation constant, Ka, serves as the equilibrium constant for this process.

Next, it is required to calculate the value of Ka for hydrofluoric acid. The Ka value for HF is 7.2 × 10⁻⁴ at 25°C.

Apply the equation for the acid dissociation constant (Ka):

Ka = [H⁺][F⁻] / [HF]

Set the equation to solve for [H⁺]:

[H+] = Ka × [HF] / [F⁻]

= (7.2 × 10⁻⁴) × (0.0022 M) / (0.0817 M)

= 1.94 × 10⁻⁵ M

The concentration of [H+] in the solution is 1.94 × 10⁻⁵ M.

Finally, find the pH using the formula:

pH = -log10[H⁺]

= -log10(1.94 × 10⁻⁵)

= 4.71

Thus, the pH of the solution is 4.71.

Learn more about pH, here:

https://brainly.com/question/2288405

#SPJ6

Explanation:

25 g   *   (100 - 25 ) C  *  4.184  J / (g C)  = 7845 J

Answer:

The student is calculating how many moles of water are required to fully react with 2.1 moles of aluminum.

Explanation:

2AL + 6H20  > 2AL(OH)3  + 3H2

The ratio 6:2 is the same as the molar ratio of H2O to Al:  (6 moles H2O)/(2 moles Al).  The student is likely calculating how many moles of water is required to fully react with 2.1 moles of Al.  

The

molarity

of the KOH solution is 0.2709 M.

Molarity is the number of moles of solute per liter of solution.

The molarity of the KOH solution in order to determine how much of it is needed to titrate a sample of 0.2452 M H2SO4.

Molarity (KOH) = (Number of moles of KOH used in titration) ÷ (Volume of KOH used in titration)

The number of moles of KOH used in the

titration

.

Number of moles of KOH = (Molarity of H2SO4) x (Volume of H2SO4)

Number of moles of KOH = 0.2452 M x 20.00 mL = 4.904 x 10-3 moles

Molarity (KOH) = (4.904 x 10-3 moles) ÷ (18.15 mL) = 0.2709 M

Therefore, the molarity of the KOH solution for 0.2452 m h2so4 solution is 0.2709 M.

to know more about

molarity

refer here:

https://brainly.com/question/8732513#

#SPJ11

Boric acid has a hydrogen-bonded layer structure in the solid state is incorrect.

Boric acid, also known as orthoboric acid or H3BO3, has a three-dimensional (3D) structure in the solid state, which is also known as a "network structure".

The main component of the structure is a covalent bond between the boron and oxygen atoms, known as a 2c-2e bond.

This network structure is formed when hydrogen bonds join the oxygen atoms to each other, thus forming a 3D framework.

Borazine (B3N3H6) consists of planar molecules, with three-membered rings of alternating nitrogen and boron atoms that are connected by single bonds.

Borazine has no hydrogen bonds, and all the boron-nitrogen bonds are 2c-2e bonds. Therefore, the statement Boric acid has a hydrogen-bonded layer structure in the solid state is incorrect.

to know more about boric acid refer here:

https://brainly.com/question/14879930#

#SPJ11

The concentration of dpip is 0.02 mmol/L.

To calculate the concentration of dpip, we can use the Beer-Lambert Law, which states that the absorbance (A) of a solution is directly proportional to the concentration (c) of the absorbing species and the path length (l) of the sample cell:

A = εcl

where;

In this case, we are given the absorbance value (A) and the molar extinction coefficient (ε), so we can rearrange the equation to solve for the concentration (c):

c = A / (εl)

Substituting the given values, we get:

c = 0.426 / (21.3/(mm cm) x 1 cm)

c = 0.426 / 21.3

c = 0.02 mmol/L

Learn more about concentration of dip here: https://brainly.com/question/19425369

#SPJ1

Water molecules can exist as solids, liquids, or gases because of the unique properties of hydrogen bonding.

Hydrogen bonds are weak chemical bonds that form between hydrogen atoms of one molecule and oxygen atoms of another molecule. In water, each molecule can form up to four hydrogen bonds with its neighboring molecules, which gives water its unique properties.

When water molecules are in a solid state (ice), they are tightly packed and held together by hydrogen bonds, which results in a rigid, crystalline structure.

In a liquid state, water molecules still have hydrogen bonds, but they are more spaced out and can move around freely, resulting in a fluid state.

In a gaseous state, water molecules are moving rapidly and have weak or no hydrogen bonds, resulting in a state where they can expand and fill any container they are placed in.

Therefore, the ability of water molecules to exist as solids, liquids, or gases is due to the nature of hydrogen bonding and the varying degree of interactions between water molecules in different states.

To know more about hydrogen click here:

brainly.com/question/28937951

#SPJ4

The acetal CH2CH2CH3(OCH3)-C-(H3CC)OCH3 molecule will disassemble into its component parts during hydrolysis. The ether bond (-C-O-) is broken during the reaction, which results in the creation of two alcohols.

Methanol (CH3OH) and 3-methyl-2-butanone are the end products (CH3COC2H5).

The structure of the larger organic product, 3-methyl-2-butanone, is

CH3

|

CH3-C=O

|

CH2-CH2-CH3

where the carbonyl group (-C=O) is attached to the middle carbon of the chain.

Acetals can be converted back into aldehydes or ketones by adding aqueous acid to them. Aldehydes or ketones are commonly referred to as being "deprotected" in this context.

When a salt of a weak acid or weak base (or both) is dissolved in water, hydrolysis of this type frequently takes place. Hydroxide anions and hydronium cations form naturally in water. Furthermore, the salt separates into its component anions and cations.

Because they can withstand numerous oxidizing and reducing agents as well as base hydrolysis, acetals are utilized as protective groups for carbonyl groups when synthesizing organic compounds.

learn more about hydrolysis of the acetal here

https://brainly.com/question/9652379

#SPJ1

Answer:

Sublimation, the dry ice changes to a gas, solid to gas is sublimation

It appears that you are attempting to identify the various elements of each of these tests shown in the scenarios for this topic.

For more information on variables kindly visit to

https://brainly.com/question/17344045

#SPJ1

There are 1.49 × 10²³ formula units of potassium nitrate in a 25 g sample.

One formula unit is defined as the simplest formula of a substance, which indicates the relative amounts of the elements in the molecule. As a result, the number of formula units in a sample can be calculated by dividing the sample's mass by the substance's molar mass.

The molecular formula of potassium nitrate is KNO3. It contains one potassium atom (K), one nitrogen atom (N), and three oxygen atoms (O). The atomic masses of the elements can be used to calculate the molar mass of the compound.

One potassium atom has a molar mass of 39.1 g/mol, one nitrogen atom has a molar mass of 14.0 g/mol, and three oxygen atoms have a combined molar mass of 48.0 g/mol.

The molar mass of KNO3 = (1 × 39.1 g/mol) + (1 × 14.0 g/mol) + (3 × 16.0 g/mol) = 101.1 g/mol.

Now, on dividing the sample's mass (25 g) by the molar mass of potassium nitrate (101.1 g/mol), a value of 0.247 mol is obtained. The Avogadro constant can be used to convert moles into formula units. The Avogadro constant, 6.022 × 10²³ formula units per mole, represents the number of formula units in one mole of a substance.

The number of formula units = (0.247 mol) × (6.022 × 10²³ formula units/mol) = 1.49 × 10²³ formula units.

Therefore, there are 1.49 × 10²³ formula units of potassium nitrate in a 25 g sample.

Learn more about potassium nitrate: https://brainly.com/question/28884348

#SPJ11

Splicing, polyadenylation, and glycosylation are the post-transcriptional modifications that are likely involved in the IAV life cycle. Therefore, the correct option is C. I and III only.

Splicing is the process by which introns are removed from the pre-mRNA transcript, while exons are joined together. Polyadenylation involves adding a poly(A) tail to the 3' end of the pre-mRNA transcript.

Glycosylation is the process by which sugar molecules are added to proteins or lipids, making them more stable and resistant to degradation.

Influenza A virus (IAV) relies on post-transcriptional modifications for the synthesis of viral proteins, which are essential for the virus's replication and survival.

To know more about Splicing, refer here:

https://brainly.com/question/22238085#

#SPJ11

The addition of a catalyst from the list below will not alter the reaction rate of an equilibrium chemical system.

The chemical equilibrium is unaffected by a catalyst. That just quickens a response. In actuality, a catalyst quickens both the forward and backward reaction. As we increase the pressure, the response changes in a way to offset that effect, so changing the pressure has no influence on the equilibrium constant.

The equilibrium position of a reversible reaction can be impacted by variations in concentration, temperature, and pressure. Chemical reactions are equilibrium reactions.

To know more about reaction rate visit:-

https://brainly.com/question/30546888

#SPJ1

From the given reactions, another quantity that is equal to ΔH degree reaction is 1. enthalpy of combustion, 2. 4x bond energy of carbon-hydrogen bond, 3. enthalpy of formation and 4. -4x bond energy of CH bond.

Hence, the correct option is A.

Enthalpy of a reaction is defined as the total sum of the heat of the system in the reaction and the product of the pressure and volume of the system. In the first reaction, the enthalpy of combustion of methane in the presence of oxygen is calculated, which gives the change in heat during burning.

In the second reaction, bond breaking will give the heat change as 4x bond energy of the carbon and hydrogen bond is endothermic.

In the third reaction, the enthalpy of formation of methane will give the change in the enthalpy.

In the fourth reaction, the difference between the bond energies of the reactants and the products that are -4x bond energy of carbon and hydrogen will result in enthalpy change.

Hence, the bond of combustion and formation can be a component along with enthalpy.

Hence, the correct option is A.

To know more about enthalpy here

https://brainly.com/question/14017717

#SPJ4