A person makes a loud sound and hears the echo of this sound 1.2s later .calculate how far the person is from the object causing the echo assume that the speed of sound is 330m/s calculate the distane

Considering the Law of Universal Gravitation, the mass of the second object is 78090.19 kg.

The Law of Universal Gravitation is a law that states that bodies, by the simple fact of having mass, experience a force of attraction towards other bodies with mass, called gravitational force.

This law establishes that every particle attracts any other particle with a force directly proportional to the product of the masses of both and inversely proportional to the square of the distance that separates them:

[tex]F=G\frac{m1m2}{r^{2} }[/tex]

where m1 and m2 are their masses; r the distance between them and G a universal constant that is called the constant of gravitation.

In this case, you know:

Replacing:

[tex]0.128 N=6.67x10^{-11}\frac{Nm^{2} }{kg^{2} } \frac{1300 kg m2}{(0.23 m)^{2} }[/tex]

Solving:

[tex]0.128 N=1.639x10^{-6}\frac{N}{kg }x m2[/tex]

m2=0.128 N ÷ 1.639×10⁻⁶ [tex]\frac{N}{kg}[/tex]

m2=78090.19 kg

In summary, the mass of the second object is 78090.19 kg.

Learn more:

This question involves the concepts of centripetal force and centripetal acceleration.

a) The centripetal acceleration for the piece of gum stuck to the outside edge of the record will be "6.67 m/s²".

b) The gum will have to overcome "0.033 N" centripetal force to remain stuck to the vinyl.

a)

The centripetal acceleration of the gum can be found using the following formula:

[tex]a_c=\frac{v^2}{r}[/tex]

where,

[tex]a_c[/tex] = centripetal acceleration = ?

v = linear speed of record = 1 m/s

r = radius of the record = [tex]\frac{diameter}{2}=\frac{0.3\ m}{2}=0.15\ m[/tex]

Therefore,

[tex]a_c=\frac{(1\ m/s)^2}{0.15\ m}\\\\a_c = 6.67\ m/s^2[/tex]

b)

Now, the centripetal force can be given as follows:

[tex]F_c=ma_c\\F_c=(0.005\ kg)(6.67\ m/s^2)\\F_c=0.033\ N[/tex]

Learn more about centripetal force here:

brainly.com/question/11324711?referrer=searchResults

The attached picture shows the centripetal force.

The required torque at the axle, is given by the difference between the

moments of the applied forces.

The torque required is 19.62 N·m counterclockwise

Reasons:

The given parameters are;

Mass of the disk, m = 5.0 kg

Location of the axle = Half the radius of the disk

Diameter of the disk, D = 40 cm = 0.4 m

Applied mass, 0.1 m from the axle = 15 kg

Applied mass, 0.3 m from the axle = 10 kg

Required:

Magnitude of torque at the axle that prevent the disk from rotating

Solution:

Torque needed = Clockwise moment - Counterclockwise moment

Clockwise moment = (10 kg × 0.3 m + 5 kg × 0.1 m) × 9.81 m/s² = 34.335 N·m

Counterclockwise moment = 15 kg × 0.1 m  × 9.81 m/s² = 14.715 N·m

τ + Counterclockwise moment = Clockwise moment

τ + 14.715 N·m = 34.335 N·m

Torque required, τ = 34.335 N·m - 14.715 N·m = 19.62 N·m

Torque required, τ = 19.62 N·m counterclockwise

Learn more here:

https://brainly.com/question/19044661

https://brainly.com/question/19247046

The probable question drawing obtained from a similar question online is attached

The number of heaters that can safely be operated in the circuit is 5 heaters.

From the question given above, the following data were obtained:

Power of heater = 300 W

Voltage (V) = 110 V

Current (I) = 15 A

Voltage (V) = 110 V

Current (I) = 15 A

P = IV

P = 15 × 110

Thus, the power that can be drawn from the circuit is 1650 W

Power of heater = 300 W

Power of Circuit = 1650 W

[tex]Number \: of \: heaters \: = \frac{power \: of \: circuit}{power \: of \: heater} \\ \\ = \frac{1650}{300} \\ \\ = 5.5[/tex]

From the calculation made above, the number of heaters that can be operated safely in the circuit is 5 heaters.

Learn more: https://brainly.com/question/14478862

Answer:

France

Explanation:

France is the undisputed champion in the world of skiing.

Answer: friction :)

Explanation:

I took the test and got 100%

Answer: An object weights 1000N on the earth's surface. ... Calculate its mass ... strength is 10 N/kg how many newtons does a 30kg object weigh.

Explanation:

Answer:

1.D 2.A 3.A 4.B 5.C 6.A 7.A 8.A

Explanation:

Answer:

Question one is: kinetic energy

Question two is: tin

Question three is: zinc

Question four is: compression stroke

Question five is: second law of thermodynamics

Question six is: Convection

Question seven is: refrigerater

Explanation:

The next page called use vocabulary

the answers:

Question twenty three is: Heat engine

Question twenty four is: Thermodynamics

Question twenty five is: solar collector

Question twenty six is: specific heat capacity

Question twenty seven is: a conductor

Question twenty eight is: it's total energy increasing

Question thrity is: internal combustion engine

Question thrity one is: Exhaust stroke

Question thrity two is: plastic

Question thrity three: I don't know this one sorry!

Question thrity four is: Temperature

Question thrity five is: Heat

Hope his helps!!! <3

Answer:

Having more plants performing photosynthesis could help reduce the amount of carbon dioxide in the atmosphere.

Explanation:

sample answer

The plants can be used in the future to help counteract some human

emissions they absorb carbon dioxide from the air and release oxygen.

It is a process carried out by photosynthetic autotrophic organisms, such as plants, algae and some prokaryotes. These organisms capture sunlight, convert it into chemical energy, which will be used to produce organic compounds, based on water and carbon dioxide.

Trees, like other plants, in the process called photosynthesis, absorb carbon dioxide from the air and release oxygen. They also make the air wetter and cooler. In this way, plants contribute to the good quality of the air we breathe.

See more about phtosynthesis at brainly.com/question/1388366

Answer:

For example, an earthquake of magnitude 5.5 releases about 32 times as much energy as an earthquake measuring 4.5. Another way to look at this is that it takes about 900 magnitude 4.5 earthquakes to equal the energy released in a single 6.5 earthquake.

Explanation:

Answer:

The water would rise because of displacement in the water

Explanation:

Force of air and gravitational force are acting on the ball when launched from the slingshot.

When a ball is launched from a slingshot, during its travel force of air as well as gravitational force are acting on the ball because there is air which moves opposite to the motion of a ball whereas the force of gravity attracts the ball downward.

The force of air slows down the motion of the ball while on the other hand, the force of gravity brings the ball to the ground due to attraction. If these two forces are not present then the ball continues its motion forever so we can conclude that force of air and force of gravity are acting on the ball when launched from the slingshot.

Learn more: https://brainly.com/question/25533186

(a) The normal force on the sleigh is 596.36 N.

(b) The magnitude and direction of acceleration of the sleigh is 3.2 m/s² upwards.

The given parameters;

The normal force on the sleigh is calculated as follows;

[tex]F_n = mg \times cos(\theta)\\\\F_n = 63 \times 9.8 \times cos(15)\\\\F_n = 596.36 \ N[/tex]

The magnitude and direction of acceleration of the sleigh is calculated as follows;

[tex]\Sigma F= ma\\\\F - mgsin(\theta) - F_f = ma\\\\F - mgsin(\theta) - \mu F_n = ma\\\\510\ - \ 63 \times 9.8 \times sin15 \ -\ 0.25\times 596.36 = 63a\\\\201 .11 = 63a\\\\a = \frac{201.11}{63} \\\\a = 3.2 \ m/s^2 \ upwards[/tex]

Learn more here:https://brainly.com/question/19133846

Hi there!

[tex]\boxed{\text{Her angular velocity decreases.}}[/tex]

Recall the conservation of angular momentum:

[tex]L_i = L_f\\\\I_iw_i = I_fw_f[/tex]

When this person extends her arms, her moment of inertia increases.

According to the conservation of angular momentum, if the moment of inertia increases, the angular velocity must DECREASE.

The acceleration of the mass sliding along the horizontal surface is 5.2 m/s².

The given parameters;

The acceleration of the mass is calculated by determining the net force on the mass as shown below;

[tex]\Sigma F_{net} = ma\\\\Wsin\theta - F_k = ma\\\\mg sin\theta - \mu_k F_n = ma\\\\mg sin\theta - \mu_k mg\ cos\theta = ma\\\\g sin\theta - \mu_k g\ cos\theta = a\\\\g(sin\theta - \mu_k \ cos\theta ) = a\\\\9.8(sin\ 45 \ - \ 0.25\times cos \ 45) = a\\\\9.8(0.53) = a\\\\5.2 \ m/s^2 = a[/tex]

Thus, the acceleration of the mass sliding along the horizontal surface is 5.2 m/s².

Learn more here:https://brainly.com/question/16902584

Answer:

If the force is 10N and mass is 5000G, then a=2m/s2

Explanation:

F=10N

m=5000

g=5kg

a=10N/ 5kg

and finally; a= 2m/s2

Answer:

The power rating 100W means the bulb consumes electrical energy of 100 Joule per hour. Joule is the SI unit of energy. 1 Watt-hour is equal to 3600 Joules.

this is my attachment answer hope it's helpful to you

Explanation:

espero que re ayude esta información para tu pregunta

Two vectors can be added together to determine the result (or resultant). ... computing the vector sum of all the individual forces acting upon that object.

i hope u understand

Temperature inversion leads to an increase in temperature as altitude increases.

The term temperature inversion refers to a situation in which a layer of warm air lies over a layer of cool air. This is also referred to as thermal inversion. This occurs when the air below to loose heat rapidly.

One of the effects of temperature inversion is reduction in visibility. So, thermal inversion leads to an increase in temperature as altitude increases.

Learn more: https://brainly.com/question/8646601

Hi there!

We can use the following:

U (Gravitational Potential Energy) = mgh

m = mass of object (kg)

g = acceleration due to gravity OR gravitational field strength

h = height, or displacement (m)

ΔU = Uf - Ui, so:

Uf = 3 × 1.5 × 10 = 45 J

Ui = 3 × 0 × 10 = 0

ΔU = Uf - Ui = 45 - 0 = 45 J

It will be

[tex] {m/s}^{2} [/tex]

I am just explaining with the units only, because you want to know the accurate unit.

[tex] \frac{m/s}{s} \\ = \frac{m}{s} \times \frac{1}{s} \\ = \frac{m}{s \times s} \\ = \frac{m}{ {s}^{2} } \\ = {m/s}^{2} [/tex]

Hope you understood.

Do comment if you have any query.

Explanation:

hope this is right!!!!!!!!!!!!!

1. a. Electron 1 -1

b. Proton 2000 +1

c. Neutron 2000 0

2. a. An uncharged nucleon is neutron. It is a chargeless subatomic particle.

b. The particle with the least mass is electron. The mass of an electron is so small that it is considered to be negligible while calculating the atomic mass of an element.

c. The particle with the same mass as a neutron is proton. However if we see the absolute mass of neutron and proton then it is seen that neutron has a greater mass than proton.

d. The particle with the same amount of charge as an electron is proton. Note that the amount of charge is only same. Electron is negatively charged while proton is positively charged.

e. A particle that is negatively charge is electron. The relative charge of electron is -1.

Hope you could understand.

If you have any query, feel free to ask.

Formulas change from F to degree C : C = ( F - 32 )/1.8

so we have (77-32)/1.8 = 25 oC

ok done. Thank to me :>

Answer: The answer is C. 298 K

Explanation:

Answer:

Explanation:

The electromagnetic force, also called the Lorentz force, acts between charged particles, like negatively charged electrons and positively charged protons. Opposite charges attract one another, while like charges repel. The greater the charge, the greater the force.

Silk,wool, DNA, cellulose and protein

Answer:

Sunspots are places where the strong magnetic fields in the Sun resist the upward motion of bubbling hot gases from underneath

Explanation:

Answer:

2000 and 156300

jade it jawaban nya

The equilibrium temperature of the iron-water mixture will be greater than the initial temperature of the cold water but less than the initial temperature of the hot iron.

According to the principle of conservation of energy, the heat lost by the red-hot iron is equal to heat absorbed by the cold water.

[tex]Q_{I} = Q_{w}\\\\m_IC_I(t_I - T) = m_wC_w (T-t_w)[/tex]

where;

From the equation given above, we can conclude that the equilibrium temperature of the iron-water mixture will be greater than the initial temperature of the cold water but less than the initial temperature of the hot iron.

Learn more here:https://brainly.com/question/14205142