The volume of a material is the total amount of matter that it can contain. The volume of the given coin has been determined to be 5.85 x [tex]10^{-6}[/tex] [tex]m^{3}[/tex]. Since the gold doubloon do not absorb water, then its volume remains constant at the ocean floor.
The volume of the gold doubloon can be determined by;
volume = [tex]\pi r^{2}[/tex] + h
where r is the radius of the coin and h is its thickness.
Such that; diameter = 6.1 cm (61 mm) and h = 2.0 mm
r = [tex]\frac{diameter}{2}[/tex]
= [tex]\frac{61}{2}[/tex]
r = 30.5 mm
Thus,
volume of the coin = [tex]\frac{22}{7}[/tex] x [tex](30.5)^{2}[/tex] x 2
= 5847.2857
Therefore, the volume of the gold doubloon is 5847.3 [tex]mm^{3}[/tex]. This can also be expressed as 5.85 x [tex]10^{-6}[/tex] [tex]m^{3}[/tex].
Since the gold doubloon is not miscible with water, thus its volume at a depth of 770 m at the ocean floor is the same as its initial volume.
Visit: https://brainly.com/question/14232630
A mass vibrates back and forth from the free end of an ideal spring of spring constant 20 N/m with an amplitude of 0.30 m. What is the kinetic energy of this vibrating mass when it is 0.30 m from its equilibrium position?
Hi there!
We can begin by using the work-energy theorem in regards to an oscillating spring system.
Total Mechanical Energy = Kinetic Energy + Potential Energy
For a spring:
[tex]\text{Total ME} = \frac{1}{2}kA^2\\\\\text{KE} = \frac{1}{2}mv^2\\\\PE = \frac{1}{2}kx^2[/tex]
A = amplitude (m)
k = Spring constant (N/m)
x = displacement from equilibrium (m)
m = mass (kg)
We aren't given the mass, so we can solve for kinetic energy by rearranging the equation:
ME = KE + PE
ME - PE = KE
Thus:
[tex]KE = \frac{1}{2}kA^2 - \frac{1}{2}kx^2\\\\[/tex]
Plug in the given values:
[tex]KE = \frac{1}{2}(20)(0.3^2) - \frac{1}{2}(20)(0.3^2) = \boxed{0 \text{ J}}[/tex]
We can also justify this because when the mass is at the amplitude, the acceleration is at its maximum, but its instantaneous velocity is 0 m/s.
Thus, the object would have no kinetic energy since KE = 1/2mv².
A child's toy consists of a spherical object of mass 50 g attached to a spring. One end of the spring is fixed to the side of the baby's crib so that when the baby pulls on the toy and lets go, the object oscillates horizontally with a simple harmonic motion. The amplitude of the oscillation is 6 cm and the maximum velocity achieved by the toy is 3.2 m/s . What is the kinetic energy K of the toy when the spring is compressed 4.7 cm from its equilibrium position?
A)The following is a list of quantities that describe specific properties of the toy. Identify which of these quantities are known in this problem.
Select all that apply.
1. force constant k
2. total energy E
3. mass m
4. maximum velocity vmax
5. amplitude A
6. potential energy U at x
7. kinetic energy K at x
8. position x from equilibrium
B)What is the kinetic energy of the object on the spring when the spring is compressed 4.7 cm from its equilibrium position?
C)What is the potential energy U of the toy when the spring is compressed 4.7 cm from its equilibrium position?
Hi there!
Part A:
The only quantities explicitly given to us are:
3. mass (m)
4. Maximum velocity (vmax)
5. Amplitude (A)
8. Position x from equilibrium
Part B:
To solve, we must begin by calculating the force constant, 'k'.
We can use the following relationship:
[tex]v = \sqrt{\frac{k}{m}(A^2-x^2)[/tex]
We are given the max velocity which occurs at a displacement of 0 m, because the mass is the fastest at the equilibrium point. We can rearrange the equation for k/m:
[tex]\frac{v^2}{(A^2-x^2)} = \frac{k}{m}[/tex]
[tex]\frac{3.2^2}{(0.06^2-0)} = \frac{k}{m} = 2844.44[/tex]
Now, we can find the velocity at 4.7cm (0.047m) using the equation:
[tex]v = \sqrt{(2844.44)(0.06^2-0.047^2)} = 1.989 m/s[/tex]
Plug this value into the equation for kinetic energy:
[tex]KE = \frac{1}{2}mv^2\\\\KE = \frac{1}{2}(0.05)(1.989^2) = \boxed{0.0989 J}[/tex]
Part C:
The potential energy of a spring is given as:
[tex]U = \frac{1}{2}kx^2[/tex]
Find 'k' using the derived quantity above:
[tex]\frac{k}{m} = 2844.44\\\\k = 2844.44m = 142.22 N/m[/tex]
Now, calculate potential energy:
[tex]U = \frac{1}{2}(142.22)(0.047^2) = \boxed{0.157 J}[/tex]
A 2 kg ball is rolling down a hill at a constant speed of 4 m/s. How much kinetic energy does the ball have?
A 2457 kg car moves with initial speed of 18 ms-l. It is stopped in 62 m by its brakes.
What is the force applied by the brakes?
Answer:
Explanation:
The work of the brakes will equal the initial kinetic energy of the car
Fd = ½mv²
F = mv²/2d
F = 2457(18²) / (2(62))
F = 6,419.903...
F = 6.4 kN
Several common barometers are built using a variety of fluids. For which fluid will the column of fluid in the barometer be the highest
Answer:
the one in which the fluid has the lowest density
A stomp rocket takes 3.1 seconds to reach its maximum height.
- What is its initial velocity? (Do not use units. If the answer is negative, please put a
negative sign in front of the answer.)
- What is its maximum height? (Do not use units. If the answer is negative, please put a
negative sign in front of the answer.)
Answer:
Explanation:
Ignoring air resistance the time to rise will equal the time to fall and initial velocity will be the same magnitude as final velocity just before impact.
v = at
v = 9.8(3.1)
v = 30.38
v = 30 m/s
max height can be found knowing the velocity is zero at the top of its flight.
v² = u² + 2as
s = (v² - u²) / 2a
s = (0.00² - 30.38²) / (2(-9.8))
s = 47.089
s = 47 m
A stomp rocket takes 3.1 seconds to reach its maximum height then the initial velocity is given as v = 30 m/s and maximum height is 47.089 m.
What is Velocity?Velocity is defined as rate of change of position with respect to time.
SI unit of velocity is m/sec. Velocity is a vector quantity.
Given that in the question time taken by rocket to reach maximum height is 3.1 sec. Ignoring air resistance the time to rise will equal the time to fall and initial velocity will be the same magnitude as final velocity just before impact.
v = at
v = 9.8(3.1)
v = 30.38
v = 30 m/s
Max height can be found knowing the velocity is zero at the top of its flight.
v² = u² + 2as
s = (v² - u²) / 2a
s = (0.00² - 30.38²) / (2(-9.8))
s = 47.089
s = 47 m
So, the initial velocity is given as v = 30 m/s and maximum height is 47.089 m.
To learn more about Velocity refer to the link:
brainly.com/question/18084516
#SPJ5
How much distance does a car travel with a speed of 2m/s in 15 min?
Explanation:
1 minute is 60 seconds so you multiply 60 * 15 and then multiply that answer * 2
Jack sits in the chair of a Ferris wheel that is rotating at a constant 0.150 rev/srev/s . As Jack passes through the highest point of his circular part, the upward force that the chair exerts on him is equal to one-fourth of his weight.
What is the radius of the circle in which Jack travels? Treat him as a point mass.
Answer:
Explanation:
At the top of the arc, 3/4 of the acceleration of gravity is use to supply the necessary centripetal acceleration.
0.75g = ω²R
R = 0.75g/ω²
R = 0.75(9.81) / (0.15 rev/s)(2π rad/rev)²
R = 8.283006...
R = 8.28 m
Question: A NEO distance from the Sun is 1.18 AU. What is its relative speed compared to Earth (round your answer to 3 decimal places)
Its relative speed compared to Earth is 0.921
The speed of the object v = 2πr/T where r = radius of orbit and T = period of orbit.
Let v = speed of earth, r = radius of earth orbit = 1 AU and T = period of earth orbit.
So, v = 2πr/T
Also, v' = speed of NEO, r' = radius of NEO orbit = distance of NEO from sun = 1.18 AU and T' = period of NEO orbit.
So, v' = 2πr'/T'
v'/v = 2πr'/T' ÷ 2πr/T
v'/v = r'/r × T/T'
From Kepler's law, T² ∝ r³
So, T'²/T² = r'³/r³
(T'/T)² = (r'/r)³
T'/T = √[(r'/r)]³
T/T' = √[(r'/r)]⁻³
So, substituting this into the equation, we have
v'/v = r'/r × T/T'
v'/v = r'/r × √[(r'/r)]⁻³
v'/v = √[(r'/r)]⁻¹
Since r' = 1.18 AU and r = 1 AU, r'/r = 1.18
So, v'/v = √[(r'/r)]⁻¹
v'/v = √[(1.18)]⁻¹
v'/v = [1.0863]⁻¹
v'/v = 0.921
So, its relative speed compared to Earth is 0.921
Learn more about NEO here:
https://brainly.com/question/24157038
(f) As the pions move away from each other, the ratio of the absolute value of electric potential energy to the final total kinetic energy of the two pions changes. At some point, the potential energy becomes negligible compared to the final total kinetic energy . We can consider that the value of the ratio is about 0.01 when , where is the final total kinetic energy of the two pions. What will the distance, , between the pions be when this criterion is satisfie
The distance r between the pions when the criteria are satisfied is 1.45 × 10⁻¹⁶ m
If we consider the potential energy (U) between the pions, then (U) can be expressed as:
[tex]\mathbf{U = \dfrac{kq^2}{r} ---- (1)}[/tex]
Given that at some instance, the potential energy becomes negligible compared to the final K.E.
As such the conservation of the total energy in the system can be given as:
E = U + KAgain, if we consider the ratio of the potential energy to the kinetic energy to be about 0.01, then:
[tex]\mathbf{\dfrac{U}{K}= 0.01} \\ \\ \mathbf{U = 0.01 K----(2)}[/tex]
∴
Equating both equations (1) and (2) together, we have:
[tex]\mathbf{\dfrac{kq^2}{r} = 0.01 K}[/tex]
[tex]\mathbf{\dfrac{kq^2}{r} = 0.01 \Bigg [ m_{o \pi}c^2 \Big [\dfrac{1}{\sqrt{1 - \dfrac{v_{\pi}^2}{c^2} }} \Big ] \Bigg] }[/tex]
[tex]\mathbf{r =\dfrac{kq^2}{ 0.01 \Bigg [ m_{o \pi}c^2 \Big [\dfrac{1}{\sqrt{1 - \dfrac{v_{\pi}^2}{c^2} }} \Big ] \Bigg] }}[/tex]
where:
r = distancek = Columb's constantq = charge on a protonm_o = rest mass of each pion in the previous questionc = velocity of light[tex]\mathbf{v_\pi}[/tex] = calculated velocity of proton in the previous questionReplacing their values in the above equation, the distance (r) between the pions is calculated as:
[tex]\mathbf{r =\dfrac{(9\times 10^9 \ N.m^2/C^2) (1.6022 \times 10^{-19} \ C)^2}{ 0.01 \Bigg [ (2.5 \times 10^{-28\ kg } )\times (3\times 10^8 \ m/s)^2 \Big [\dfrac{1}{\sqrt{1 - \dfrac{(2.97 \times 10^8 \ m/s)^2}{(3 \times 10^8 \ m/s)^2} }} \Big ] \Bigg] }}[/tex]
distance (r) = 1.45 × 10⁻¹⁶ m
Therefore, we can conclude that the distance r between the pions when the criteria are satisfied is 1.45 × 10⁻¹⁶ m
Learn more about electric potential energy here:
https://brainly.com/question/21808222?referrer=searchResults
The oscillation of the 2.0-kg mass on a spring is described by x = 3.0 cos (4.0 t) where x is in centimeters and t is in seconds. What is the force constant k of the spring?
The force constant k of the spring, if The oscillation of the 2 kg mass of spring is described by x = 3.0 cos (4.0 t) is 32 N / m.
What is force?Force is the influence of either pull or pushes in the body. Basically, gravitation forces, nuclear forces, and friction forces are the types of forces. For e.g. when the wall is hit by a hand then a force is exerted by the hand on the wall as well as the wall also exerts a force on the hand. There are different laws given to Newton to understand force.
Newton is a unit of force used by physicists that is part of the International System (SI). The force required to move a body weighing one kilogram one meter per second is known as a newton.
Given:
The mass of the block, m = 2 kg,
The oscillation of spring, x = 3 cos 4t,
Calculate the omega by comparing the standard equation given below,
[tex]x = A cos \omega t[/tex]
ω = 4
Calculate the spring constant by the formula given below,
[tex]\omega = \sqrt{\frac{k}{m} }[/tex]
4² = k / 2
k = 32 N / m
Therefore, the force constant k of the spring, if The oscillation of the 2 kg mass of spring is described by x = 3.0 cos (4.0 t) is 32 N / m.
To know more about Force:
https://brainly.com/question/13191643
#SPJ2
I need help with this equation. 4 tutors so far on the math side are unable to help me solve the problem.
MCQ
A body of mass 5kg is pushed for distance x with accleration a. Then workdone against static friction is
1.ma*X cosB
2.ma*X sinB
3.zero
4.ma/X
Answer:
ma*XsinB
option 2 is correct
The vertical position of the 100-kg block is adjusted by the screw activated wedge. Calculate the moment which must be applied to the handle of the screw to raise the block. The single thread screw has square threads with a mean diameter of 30 mm and advances 10 mm each complete turn. The coefficient of friction for the screw threads is 0.24, and the coefficient of friction for all the mating surfaces of the block and the wedge is 0.40. Neglect friction at the ball joint A
We have that for the Question "" it can be said that Calculate the moment which must be applied to the handle of the screw to raise the block is
M = 7.30 N.mFrom the question we are told
The vertical position of the 100-kg block is adjusted by the screw activated wedge. Calculate the moment which must be applied to the handle of the screw to raise the block. The single thread screw has square threads with a mean diameter of 30 mm and advances 10 mm each complete turn. The coefficient of friction for the screw threads is 0.24, and the coefficient of friction for all the mating surfaces of the block and the wedge is 0.40. Neglect friction at the ball joint A
Generally the equation for the Block is mathematically given as
[tex]\sum Fy=0[/tex]
[tex]981cos21.80 = R_2cos53.6\\\\R_2=1535N[/tex]
the equation for the Wedge is mathematically given as
[tex]\sum Fx=0\\\\1535cos36.4=Pcos21.8\\\\P=1331N[/tex]
the equation for the Screw is mathematically given as
[tex]\beta = tan^{-1}*\frac{L}{2*\pi*r} \\\\\beta = tan^{-1}*\frac{10}{2*\pi*(15)} \\\\\\beta = 6.06\\\\\theta = tan^{-1}*0.25 \\\\\theta = 14.04\\\\\\Therefore\\\\\theta + \beta = 20.1\\\\[/tex]
Therefore
[tex]M = Pr tan (\theta + \beta)\\\\M = 1331(0.015) tan20.09\\\\M = 7.30 N.m[/tex]
For more information on this visit
https://brainly.com/question/23379286
A 5 kg box is sitting on a rough wooden surface. The coefficient of static friction between the box and surface is 0.6. If the normal force on the box is 50 N, calculate the force of friction which must be overcome to move the box. Round your answer to the nearest whole number.
The force of friction needed to overcome to move the box is 29.4N
According to Newton's second law;
[tex]\sum F_x = ma_x\\[/tex]
Taking the sum of force along the plane;
[tex]F_m -F_f = ma\\F_m -F_f = 0\\F_m=F_f = \mu R[/tex]
This shows that the moving force is equal to the frictional force
Given that
[tex]\mu = 0.6\\R = mg = 49N[/tex]
Get the frictional force;
Since
[tex]F_f = \mu R\\F_f = 0.6 \times 49\\F_f = 29.4N[/tex]
Hence the force of friction needed to overcome to move the box is 29.4N
Learn more here: https://brainly.com/question/189856
Make one comparison between the moral condition of the world at the time of the Flood with our day. Only One Short explanation.
The moral condition of the world today appears to be worse than it was in the antediluvian era.
The biblical account of the flood records that the world delved into apostasy in the days of Noah so much so that God regretted the fact that he created man. Some of the evils of the antediluvian world include; sodomy, drunkenness, lewdness and several forms of immorality.
We can see that these vices that led to the destruction of the world due to moral bankruptcy in the antediluvian era is still very much prevalent in our world today. The moral condition of the world today appears to be worse than it was in the antediluvian era.
Learn more: https://brainly.com/question/8646601
What do alcohol, drugs, and tobacco all have in common?
All have some medicinal value.
All are harmful to the body.
All are depressants.
All are stimulants.
Answer:
all are harmful to the body
A merry-go-round of radius R, shown in the figure, is rotating at constant angular speed. The friction in its bearings is so small that it can be ignored. A sandbag of mass m is dropped onto the merry-go-round, at a position designated by r. The sandbag does not slip or roll upon contact with the merry-go-round.
The figure shows a top view of a merry-go-round of radius capital R rotating counterclockwise. A sandbag is located on the merry-go-round at a distance lowercase r from the center.
Rank the following different combinations of m and r on the basis of the angular speed of the merry-go-round after the sandbag "sticks" to the merry-go-round.
The angular speed of the merry-go-round reduced more as the sandbag is
placed further from the axis than increasing the mass of the sandbag.
The rank from largest to smallest angular speed is presented as follows;
[m = 10 kg, r = 0.25·R]
[tex]{}[/tex] ⇩
[m = 20 kg, r = 0.25·R]
[tex]{}[/tex] ⇩
[m = 10 kg, r = 0.5·R]
[tex]{}[/tex] ⇩
[m = 10 kg, r = 0.5·R] = [m = 40 kg, r = 0.25·R]
[tex]{}[/tex] ⇩
[m = 10 kg, r = 1.0·R]
Reasons:
The given combination in the question as obtained from a similar question online are;
1: m = 20 kg, r = 0.25·R
2: m = 10 kg, r = 1.0·R
3: m = 10 kg, r = 0.25·R
4: m = 15 kg, r = 0.75·R
5: m = 10 kg, r = 0.5·R
6: m = 40 kg, r = 0.25·R
According to the principle of conservation of angular momentum, we have;
[tex]I_i \cdot \omega _i = I_f \cdot \omega _f[/tex]
The moment of inertia of the merry-go-round, [tex]I_m[/tex] = 0.5·M·R²
Moment of inertia of the sandbag = m·r²
Therefore;
0.5·M·R²·[tex]\omega _i[/tex] = (0.5·M·R² + m·r²)·[tex]\omega _f[/tex]
Given that 0.5·M·R²·[tex]\omega _i[/tex] is constant, as the value of m·r² increases, the value of [tex]\omega _f[/tex] decreases.
The values of m·r² for each combination are;
Combination 1: m = 20 kg, r = 0.25·R; m·r² = 1.25·R²
Combination 2: m = 10 kg, r = 1.0·R; m·r² = 10·R²
Combination 3: m = 10 kg, r = 0.25·R; m·r² = 0.625·R²
Combination 4: m = 15 kg, r = 0.75·R; m·r² = 8.4375·R²
Combination 5: m = 10 kg, r = 0.5·R; m·r² = 2.5·R²
Combination 6: m = 40 kg, r = 0.25·R; m·r² = 2.5·R²
Therefore, the rank from largest to smallest angular speed is as follows;
Combination 3 > Combination 1 > Combination 5 = Combination 6 >
Combination 2
Which gives;
[m = 10 kg, r = 0.25·R] > [m = 20 kg, r = 0.25·R] > [m = 10 kg, r = 0.5·R] > [m =
10 kg, r = 0.5·R] = [m = 40 kg, r = 0.25·R] > [m = 10 kg, r = 1.0·R].
Learn more here:
https://brainly.com/question/15188750
The amount of work done in example B is:
Answer:
Explanation:
20 n is an unknown amount
If that is supposed to be 20 N(ewtons)
then W = Fd = 20(15) = 300 J
Answer: it will be 300 newton meters
Explanation:
A 1.1 kg ball drops vertically onto a floor, hitting with a speed of 23 m/s. It rebounds with an initial speed of 5.0 m/s. (a) What impulse acts on the ball during the contact
Hi there!
We know that:
I = Δp = m(vf - vi)
Plug in the given values. Remember to take into account direction ⇒ let the rebound velocity be positive and initial be negative.
I = 1.1(5 - (-23)) = 30.8 Ns
What is a list of all the states of matter?
Answer:
3
Explanation:
state of matter are solid
liquid and
gases
Answer:
3
Explanation:
state of a matter are solid liquid and gas
calculate the surface area of a box whose mass is 200 kg and exerts a pressure of 100 Pascal on the floor.
Answer:
Explanation:
If 2×2 is 4 so 1 kg can be 1 gram if it belive on it self some people change
A 2.0 kg particle moving along the z-axis experiences the
force shown in (Figure 1). The particle's velocity is
3.0 m/s at x = 0 m.
A) At what point on the x axis does the particle have a turning point?
At point x = 0, the particle accelerates. Since there will be change of velocity at that point. The the force of the particle will change from negative sign to positive sign according to the given figure, we can therefore conclude that the particle will have a turning point at point x = 0.
Given that a 2.0 kg particle moving along the z-axis experiences the force shown in a given figure.
Force is the product of mass and acceleration. While acceleration is the rate of change of velocity. Both the force and acceleration are vector quantities. They have both magnitude and direction.
If the particle's velocity is 3.0 m/s at x = 0 m, that mean that the particle experience change of velocity at point x = 0. Since the the force of the particle will change from negative sign to positive sign according to the given figure, we can therefore conclude that the particle will have a turning point at point x = 0.
Learn more here: https://brainly.com/question/20366032
The car on this ramp starts from rest. When released, it
accelerates at a constant rate. It has an initial position of 12 cm
from the top of the ramp, and has an average velocity of 1.20 m/s
for a total of 1.80 s. Which is the correct final position of the car?
Answer:
Explanation:
s 0.12 + 1.20(1.80) = 2.28 m from the top.
At the molecular level, as the kinetic energy increases, what happens to the temperature?
decreases
increases
stays the same
Answer: increases
Explanation:
Temperature is a measure of the average velocity of the molecular particles. The faster they go, the higher the temperature.
A crane is lifting a 500 lb car. If the power of the crane 1.82 hp, find the velocity of the car.
Answer:
Explanation:
550 ft•lb/s / hp•(1.82 hp) / 500 lb = 2.00 ft/s
A boat is using echo-sounding equipment to measure the depth of the water underneath it, as illustrated in the first diagram.
The equipment in the boat sends a short pulse of sound downwards and detects the echo after a time interval of 0.80s. i Describe how an echo is caused. ii The speed of sound in water is 1500 m/s. Calculate the distance travelled (in metres) by the sound in 0.80 s.
Answer:
Explanation:
Echo is caused by sound energy reflecting off of "hard" surfaces. It could be as simple as a change in density of the material the sound is traveling through.
In 0.8 s, the sound has traveled 0.8(1500) = 1200 m.
That means the object that reflected the sound is 600 m below the boat. The sound took 0.4 s to reach the object and another 0.4 s to return the echo.
EXAM ENDS IN 30 MINS
PLSSS HELPPP ILL MAKE U BRAINLIEST
Explanation:
F = Icurrent×length×Bfieldstrength×sin(angle field to wire)
in our case
Icurrent = 10 A
length = 0.02km = 20 meters
B = 10^-6 T
angle = 30 degrees.
F = (20 A)(20m)(10^-6 T)×sin(30) = 400× 10^‐6 ×0.5 N =
= 200 × 10^-6 = 2 × 10^‐4 N
A thin piece of semiconducting silicon will be used to fabricate an electrical device. This layer is 0.10 cm thick and cut into a strip 0.50 cm wide by 1.50 cm long. Electrical contacts are placed at opposite ends of its length. The intrinsic carrier concentration of the silicon at room temperature (300K) is 1.0x1010/cm3 and the bandgap energy is 1.12 eV.
Required:
a. If the application of 1.0 volt to the contacts results in a current of 0.019 amps, what is the resistivity in (ohm-cm) of the material?
b. If the material's conductivity is due to doping with aluminum to a level of [Al]= 1x10^17 atoms/cm^3, what is the resulting conductivity "type" and what is the mobility of these "majority" carriers in this material (assuming that the aluminum is fully ionized - i.e. all Al atoms donated electrons).
We have that for the Question "a)what is the resistivity in (ohm-cm) of the material? b) what is the resulting conductivity "type" and what is the mobility of these "majority" carriers in this material"
Answer:
Resistivity = [tex]1.754 ohm-cm[/tex]Conductivity = [tex]6.25*10^{25} cm^3/V-s[/tex]
From the question we are told
This layer is 0.10 cm thick and cut into a strip 0.50 cm wide by 1.50 cm long. The intrinsic carrier concentration of the silicon at room temperature (300K) is 1.0x1010/cm3 and the bandgap energy is 1.12 eV.
A) Resistivity is given as,
[tex]p = \frac{RA}{l}[/tex]
where,
[tex]R = \frac{V}{I}[/tex]
Therefore,
[tex]p = \frac{VA}{Il}\\\\p = \frac{1*(0.1*0.5)}{0.019*1.5}\\\\p = 1.754 ohm-cm[/tex]
B) Conductivity is given as,
[tex]U = \frac{\rho}{pe}\\\\U = \frac{10^{17}}{10^{10}*1.6*10^{-19}}\\\\U = 6.25*10^{25} cm^3/V-s[/tex]
For more information on this visit
https://brainly.com/question/23379286
Just before it strikes the ground, what is the watermelon's kinetic energy?
Answer:
Answer: At its lowest point, the kinetic energy of a watermelon just as it touches the ground is zero if it does not touch anything on its way down.
Explanation:
This is because that upon having been dropped from a height, an object no longer has any kinetic energy at all. Kinetic energy transforms to gravitational potential energy during the fall and there's nothing left over for kinetic once you stop accelerating anymore. Fortunately, things don't stay still until they land very often! For example, if a person catches the fruit with his hands after some air resistance slows him down - making him more similar in speed to the lag of the trajectory - then he'll be able to share some of his saved up gravitational potential with that watermelon and do some