a 2.80 kg grinding wheel is in the form of a solid cylinder of radius 0.100 m .what constant torque will bring it from rest to an angular speed of 1200 rev/min in 2.5 s ?

A wire is formed into a circle having a diameter of 15 cm and is placed in a uniform magnetic field of 2 mt. the wire carries a current of 5 a.  The maximum torque on the wire is approximately 1.767 N·m.

To find the maximum torque on the wire, we can use the formula:

Torque (τ) = μ x B

where μ is the magnetic moment and B is the magnetic field.

First, we need to find the area of the circle formed by the wire. The area A can be calculated using the formula:

A = πr²

where r is the radius of the circle, and since the diameter is 15 cm, the radius will be 7.5 cm (15/2). Now, calculate the area:

A = π(7.5²) ≈ 176.71 cm²

Next, we need to calculate the magnetic moment (μ), which is the product of the current (I) and the area (A):

μ = IA = 5 A × 176.71 cm² ≈ 883.55 A·cm²

Now that we have the magnetic moment and the magnetic field (B = 2 mT = 2 x 10^-3 T), we can find the maximum torque:

τ = μ x B

τ = 883.55 A·cm² × 2 × 10^-3 T

τ  ≈ 1.767 N·m

So, approximately 1.767 N·m. is the maximum torque.

For more such questions on torque, click on:

https://brainly.com/question/17512177

#SPJ11

Answer:

Temperature

Explanation:

When are the sun's rays perpendicular to the earth's surface at the equator, The Sun's rays are perpendicular to the Earth's surface on the equator during the March equinox and the September equinox.

These are the two periods of the year when the Sun's rays are directly overhead at the equator, resulting in equal lengths of day and night all across the world during the equinoxes. The June solstice and the December solstice are the other two events. Sun's rays are not perpendicular to the Earth's surface at the equator during these solstices, but instead at the Tropic of Cancer and the Tropic of Capricorn.

A perpendicular ray is one that comes at a 90-degree angle. This happens during the equinox. The term "equinox" comes from the Latin word "aequus," which means "equal," and "nox," which means "night." The vernal equinox is the day when the hours of daylight and nighttime are equal. It occurs on or around March 20 or 21.

The autumnal equinox occurs when the hours of day and night are equal. It occurs on or around September 22 or 23.

For more such questions on sun's rays

brainly.com/question/655489

#SPJ11

The direction of the induced current measured in the ammeter will be in the direction of your thumb, following the right-hand rule.

To determine the direction of the induced current measured in the ammeter when the magnet with the south pole pointing downward is pulled upward completely through the solenoid, follow these steps:

1. Apply Lenz's Law, which states that the induced current will create a magnetic field that opposes the change in the original magnetic field.
2. As the magnet's south pole is pulled upward through the solenoid, the magnetic field inside the solenoid is decreasing.
3. To oppose this decrease, the induced current will create a magnetic field in the same direction as the original magnetic field, meaning the induced magnetic field will have its south pole pointing downward.
4. Use the right-hand rule to determine the direction of the induced current: Curl your fingers in the direction of the magnetic field (south pole pointing downward), and your thumb will point in the direction of the induced current.

Thus, the direction of the induced current will be in the right-hand rule of your thumb.

To know more about the right-hand rule click here:

https://brainly.com/question/27332584

#SPJ11

The mass of the planet is known to be one that would vary according to its density, assuming it has an identical radius to Earth.

When comparing two objects with the same size, their mass will differ if their densities are dissimilar, since density is the measure of mass per unit volume.

Therefore, in the case that the planet's density is equivalent to that of Earth, its mass would parallel Earth's. In the event that the density of the planet surpasses that of Earth, then it would weigh more than Earth due to an increase in its mass. If the density of the planet is lower compared to that of Earth, then its mass would also be lower than that of Earth.

Learn more about Earth from

https://brainly.com/question/15205710

#SPJ1

The new angular speed of the turntable is approximately 2.91 rad/s.

Circular movement of object around central axis or point is called rotation.

Moment of inertia of a solid disk is given by the equation: I = (1/2) * m * r²

I is moment of inertia, m is mass of the disk, and r is radius of the disk.

Initial moment of inertia of the turntable is: I₁ = (1/2) * m * r² = (1/2) * 2.15 kg * (0.16 m)² = 0.055 kg m²

Final moment of inertia of the turntable and the gum is: I₂ = I₁+ m_gum * r_gum²

m_gum is mass of gum and r_gum is distance of gum from rotation axis.

I₂ = 0.055 kg m² + 0.011 kg * (0.11 m)² = 0.066 kg m²

L₁ = I₁ * w₁

w1 is initial angular speed of turntable in radians per second.

w1 = (33.3 rpm) * (2π rad/rev) / (60 s/min) = 3.49 rad/s

Final angular momentum of the system (turntable and gum) is:

L₂ = I₂ * w₂

w₂ is final angular speed of turntable in radians per second.

As angular momentum is conserved : L₁ = L₂

I₂ * w₂ = I₂ * w₂

w₂ = (I₁ / I₂) * w₁ = (0.055  / 0.066 ) * 3.49  = 2.91 rad/s

Therefore, the new angular speed of the turntable is approximately 2.91 rad/s.

To know more about rotation, refer

https://brainly.com/question/28439775

#SPJ1

Note: The question given on the portal is incomplete. Here is the complete question.

Question : A 2.15-kg, 16.0-cm radius, high-end turntable is rotating freely at 33.3 rpm when a naughty child drops 11 g of chewing gum onto it 11.0 cm from the rotation axis. Assuming that the gum sticks where it lands, and that the turntable can be modeled as a solid, uniform disk, what is the new angular speed of the turntable

The dam is 80% efficient at converting the water's potential energy to electrical energy. 6155.84 kg of water must pass through the turbines each second to generate 48.0 MW of electricity.

How many kilograms of water must pass through the turbines each second to generate 48.0 MW of electricity? This is a typical value for a small hydroelectric dam.

Firstly, we need to use the formula; Power = Energy/timeThe power output is given as 48.0 MW. Let's convert this to watts.1 MW = 1,000,000 W48.0 MW = 48,000,000 W

The efficiency of the dam is given as 80%. Therefore, the dam is 80% efficient at converting potential energy to electrical energy.

Let the amount of water that passes through the turbines per second be m kg. The potential energy of water = m * g * h

where m = mass of water,

g = acceleration due to gravity,

and h = height of water from the turbine.

m = (Power * efficiency)/(g * h)

We are given g = 9.8 m/s²,

h = 55 m,

and efficiency = 80%

= 0.8m = (48,000,000 * 0.8)/(9.8 * 55)

= 6155.84 kg

Therefore, 6155.84 kg of water must pass through the turbines each second to generate 48.0 MW of electricity.

For more such questions on electrical energy

brainly.com/question/17754867

#SPJ11

Answer:

when the ball is halfway down the ramp, it will be going at a speed of 7 m/s.

Explanation:

To determine the speed of a 2 kg ball when it is halfway down a 5 m tall ramp, we can use the principles of conservation of energy and kinematics.

At the top of the ramp, the ball has gravitational potential energy given by:

PE = mgh

where m is the mass of the ball (2 kg), g is the acceleration due to gravity (9.8 m/s^2), and h is the height of the ramp (5 m). Plugging in these values, we get:

PE = (2 kg)(9.8 m/s^2)(5 m) = 98 J

As the ball rolls down the ramp, some of this potential energy is converted into kinetic energy, which is given by:

KE = (1/2)mv^2

where v is the velocity of the ball. At any point along the ramp, the total energy (potential plus kinetic) of the ball remains constant. Therefore, we can set the initial potential energy equal to the sum of kinetic and potential energies at any point along the ramp.

When the ball is halfway down the ramp, it has descended a height of 2.5 m. Its potential energy at this point is:

PE = (2 kg)(9.8 m/s^2)(2.5 m) = 49 J

Therefore, its kinetic energy at this point must also be 49 J. Plugging this into our equation for kinetic energy, we get:

49 J = (1/2)(2 kg)v^2

Solving for v, we get:

v = sqrt(98/2) = sqrt(49) = 7 m/s

A telescope consisting of a +3.0-cm objective lens and a +0.60-cm eyepiece is used to view an object that is 20 m from the objective lens. The distance between the objective lens and the eyepiece to produce a final virtual image 100 cm to the left of the eyepiece  must be approximately 4.14 cm.

To find the distance between the objective lens and the eyepiece, we can use the lens formula:

1/f = 1/v - 1/u

where f is the focal length, v is the distance from the lens to the image, and u is the distance from the lens to the object.

For the objective lens:
u = -20 m (distance from the object to the lens)
f = 3.0 cm (focal length)
1/f = 1/v - 1/u
1/(3.0) = 1/v - 1/(-20)
1/(3.0) + 1/(20) = 1/v

Solving  for v:

v = 3.5294 cm (distance from the objective lens to the image)

For the eyepiece:
u = 100 cm (distance from the image to the eyepiece)
f = 0.60 cm (focal length)
1/f = 1/v - 1/u
1/(0.60) = 1/v - 1/(100)

Solving  for v:
v = 0.6129 cm (distance from the eyepiece to the final virtual image)

Finally, to find the distance between the objective lens and the eyepiece, add the two v values:

3.5294 cm (distance from the objective lens to the image) + 0.6129 cm (distance from the eyepiece to the final virtual image) = 4.1423 cm

Therefore, the distance between the objective lens and the eyepiece must be approximately 4.14 cm to produce a final virtual image 100 cm to the left of the eyepiece.

For more such questions on objective lens, click on:

https://brainly.com/question/17054095

#SPJ11

The probable question may be:

A telescope consisting of a +3.0-cm objective lens and a +0.60-cm eyepiece is used to view an object that is 20 m from the objective lens. (a) What must be the distance between the objective lens and eyepiece to produce a final virtual image 100 cm to the left of the eyepiece?

Solenoid would need to carry a current of about 0.157 A to produce a magnetic field with the dipole strength of the given bar magnet.

The dipole moment of the bar magnet is given by:

m = VχB

where V is the volume of the magnet, χ is the magnetic susceptibility, and B is the magnetic field strength.

The volume of the magnet is:

V = (6 mm) (6 mm) (12 mm)

   = 432 mm⁻³ = 4.32 × 10⁻⁷m⁻³

The magnetic susceptibility of the magnet depends on its material and can be found from a table or measured experimentally.

Let's assume it is χ = 0.05 (typical for a permanent magnet).

The magnetic field strength at the center of the magnet can be approximated as:

B = μ0m / (4πr³)

where μ0 is the permeability of free space, m is the dipole moment, and r is the distance from the center of the magnet.

For our magnet, r = 6 mm / 2 = 3 mm = 0.003 m.

Substituting the given values, we get:

B = (4π × 10⁻⁷ T m/A) (0.05 A m²) / (4π (0.003 m)³) ≈ 0.164 T

To produce a magnetic field of this strength with a solenoid, we can use the formula for the magnetic field at the center of a solenoid:

B = μ0nI

where n is the number of turns per unit length and I is the current in the solenoid.

The number of turns per unit length is:

n = N / L

where N is the total number of turns (N = 100) and L is the length of the solenoid (L = 12 mm = 0.012 m).

Substituting the given values and solving for I, we get:

I = B / (μ0n) = B L / (μ0N)

= (0.164 T) (0.012 m) / (4π × 10⁻⁷ T m/A) (100)

≈ 0.157 A

Therefore, the solenoid would need to carry a current of about 0.157 A to produce a magnetic field with the dipole strength of the given bar magnet.

Learn more about solenoid

brainly.com/question/15504705

#SPJ11

When the ends of the solenoid are connected to a lightbulb, The induced emf during the time interval (0.75 seconds) is 0.8533 V.

The induced emf in a solenoid can be calculated using Faraday's law of electromagnetic induction, which states that the induced emf is equal to the negative rate of change of magnetic flux through the solenoid.

The formula for induced emf is:
emf = -N * (ΔΦ / Δt)
where N is the number of turns in the solenoid (320), ΔΦ is the change in magnetic flux, and Δt is the time interval (0.75 seconds).

Magnetic flux (Φ) is given by the formula:
Φ = B * A
where B is the magnetic field and A is the area of the solenoid rings. The initial magnetic flux is zero since the initial magnetic field is zero.

The final magnetic flux is:
Φ_final = 0.50 T * 0.004 m² = 0.002 Wb

So, the change in magnetic flux (ΔΦ) is:
ΔΦ = Φ_final - Φ_initial = 0.002 Wb - 0 Wb = 0.002 Wb

Now, we can calculate the induced emf:
emf = -320 * (0.002 Wb / 0.75 s) = -0.8533 V

Since the negative sign indicates the direction of the induced emf, the magnitude of the induced emf is 0.8533 V.

For more such questions on solenoid, click on:

https://brainly.com/question/25562052

#SPJ11

The different type of motion are translational motion, rotational motion, oscillatory motion and motion due to gravity.

The following are examples of different types of motion:

a. The motion of a baseball dropped from the roof of a house is an example of free fall motion. The ball accelerates towards the ground due to the force of gravity.

b. The motion of a baseball rolling toward third base is an example of translational motion. The ball moves in a straight line along the ground, with its direction determined by the initial velocity and any external forces acting upon it.

c. The motion of a pinwheel in the wind is an example of rotational motion. The blades of the pinwheel rotate about a central axis, with their motion determined by the direction and strength of the wind.

d. The motion of a door swinging open is an example of oscillatory motion. The door oscillates back and forth around its equilibrium position, with its motion determined by the initial displacement and any external forces acting upon it.

For more such questions on motion , Visit:

https://brainly.com/question/453639

#SPJ11

The complete questions is:

Explain the different types of motion occur in the following cases

a. a baseball dropped from the roof of a house

b. a baseball rolling toward third base

c. a pinwheel in the wind

d. a door swinging open

a) The amplitude of the magnetic field is approximately 3.34 x 10^-7 T.

b) The average magnitude of the Poynting vector is approximately 1.12 × 10^5 W/m^2.

A light wave is traveling in a glass of index 1.5. If the electric field amplitude of the wave is known to be 100 V/m,

The amplitude of the magnetic field is given as `B = E/c`,

where E is the amplitude of the electric field, and c is the speed of light in a vacuum (3 × 108 m/s).

Therefore,`B = E/c = 100/(3 × 108) = 3.34 × 10^-7 T`

The average magnitude of the Poynting vector is given as

`Pave = 1/(2μ0) * E^2 * n * c`, where E is the electric field amplitude, n is the refractive index of the glass, c is the speed of light in a vacuum, and `μ0 = 4π × 10^-7 T.m/A` is the permeability of free space.

Substituting the given values, we have;

`Pave = 1/(2 × 4π × 10^-7) * (100)^2 * 1.5 * 3 × 10^8 = 1.12 × 10^5 W/m^2`

Therefore, the average magnitude of the Poynting vector is `1.12 × 10^5 W/m^2`.

To know more about light waves click here:

https://brainly.com/question/29299168

#SPJ11

You can create a total of 7 different combinations of capacitance using all three capacitors in your circuits.

In the event that you are given three distinct capacitors, C1, C2, and C3, you can make a sum of seven unique mixes of capacitance involving every one of the capacitors in your circuits. To work out the quantity of mixes, you can involve the equation for the all out number of blends of n things taken r at a time, which is nCr = n! /(r! * (n-r)!). For this situation, you need to find the all out number of mixes of the three capacitors taken three all at once, so you can utilize the equation as 3C3 = 3! /(3! * (3-3)!), which streamlines to 1. Subsequently, you can make one blend utilizing every one of the three capacitors. Furthermore, you can make three mixes utilizing two capacitors each, and three blends utilizing just a single capacitor each. This gives a sum of seven distinct mixes of capacitance involving each of the three capacitors in your circuits.

To learn more about combinations of capacitance, refer:

https://brainly.com/question/13151593

#SPJ4

The difference in radius of motion between the alpha particle and the deuteron in the magnetic field region is (2/3) times the radius of the deuteron.

The radius of motion of a charged particle in a magnetic field is given by the formula:

r = (mv)/(Be)

where r is the radius of motion, m is the mass of the particle, v is its velocity, B is the magnetic field strength, and e is the charge of the particle.

For the alpha particle, using its charge and mass values, we get: r_alpha = (4mv)/(2Be)

For the deuteron, we have:

r_deuteron = (2mv)/(Be)

Taking the difference between these two radii, we get:

r_alpha - r_deuteron = (4mv)/(2Be) - (2mv)/(Be)

r_alpha - r_deuteron = (2mv)/(2Be)

r_alpha - r_deuteron = (mv)/(Be)

We can substitute the expression for r_deuteron to get:

r_alpha - r_deuteron = (mv)/(Be) - (2mv)/(2Be)

r_alpha - r_deuteron = (mv)/(2Be)

Thus, the difference in radius of motion between the alpha particle and the deuteron is proportional to the mass of the particle and inversely proportional to the magnetic field strength and the charge of the particle. As the alpha particle has twice the charge and four times the mass of the deuteron, its radius of motion is (2/3) times that of the deuteron.

To know more about alpha particle, refer here:

https://brainly.com/question/24276675#

#SPJ11

a) The required speed of the large fish just after it eats the small one is calculated to be 0.846 m/s.

b) The energy dissipated during this meal is calculated to be 2.097 J.

a) Mass of big fish is given as M = 15 kg

Mass of small fish m = 4.5 kg

The initial speed u of small fish is 0.

The initial speed of the big fish is 1.1 m/s.

From principle of conservation of linear momentum,

Total initial momentum = Total final momentum

Both the fish are said to have same final speed

M U + m u = (M + m) V

15 × 1.1 + 4.5 × 0 = (15 + 4.5) V

16.5 = 19.5 V

V = 16.5/19.5 = 0.846 m/s

Hence, the speed of the large fish after the meal is calculated as 0.846 m/s.

b) Let us calculate the mechanical energy dissipated,

Initial K.E = 1/2 M U² + 1/2 m u² = 1/2 × 15 × 1.1² + 1/2 × 4.5 × 0² = 9.075 J

Final K.E = 1/2 M V² + 1/2 m V² =  1/2 × 15 × 0.846² + 1/2 × 4.5 × 0.846² = 6.978 J

The change in kinetic energy is,

K.Efin - K.Eini = 9.075 - 6.978

ΔK.E = 2.097 J

Thus, the energy dissipated in eating this meal is 2.097 J.

The given question is incomplete. The complete question is 'The initial speed of the big fish is 1.1 m/s.'

To know more about speed:

https://brainly.com/question/15297133

#SPJ4

Many physical systems in nature are well-described as a simple harmonic oscillator because they exhibit a restoring force that is directly proportional to the displacement from the equilibrium position.

The simple harmonic oscillator is a model that describes the behavior of many physical systems in nature, including springs, pendulums, and vibrating atoms or molecules. This is because many systems in nature can be modeled as having a restoring force that is proportional to the displacement from an equilibrium position and acts in the opposite direction to the displacement.

This restoring force causes the system to oscillate back and forth around the equilibrium position, and the motion of the system can be described using the principles of harmonic motion. Additionally, the equations that describe simple harmonic motion have simple, elegant solutions, making it a useful and widely applicable model in physics. As a result, the simple harmonic oscillator model is often used to describe and analyze a wide range of physical systems in nature.

To know more about simple harmonic oscillator, here

brainly.com/question/13008541

#SPJ4

The maximum kinetic energy of the new pendulum will be larger than that of the original pendulum because the kinetic energy of a simple harmonic oscillator is proportional to the square of its amplitude and the amplitude of the new pendulum will be the same as that of the original pendulum.

Since the new sphere has a greater density, it will move faster at the bottom of its swing, leading to a larger maximum kinetic energy.

A pendulum is a simple mechanical device that consists of a weight suspended from a pivot point or support, allowing it to swing back and forth under the influence of gravity. The weight is known as the bob and the pivot point as the suspension point. The motion of the pendulum is a classic example of harmonic motion, with a constant period that depends only on the length of the pendulum and the acceleration due to gravity.

Pendulums have been used for many purposes, including timekeeping, scientific experiments, and artistic displays. In clocks, the regular motion of a pendulum is used to regulate the movement of gears and hands, providing an accurate measure of time. Pendulums have also been used to study the properties of gravity, as well as to demonstrate concepts in physics such as energy conservation and resonance.

To learn more about Pendulum visit here:

brainly.com/question/14759840

#SPJ4

This means that the body stops immediately after the force acting on it becomes zero. Therefore, the correct answer is None of them.

What is Velocity?

Velocity is a physical quantity that describes the speed and direction of motion of an object. It is a vector quantity, which means that it has both magnitude and direction.

To calculate the time taken by the body to stop, we need to use the concept of Newton's second law of motion, which states that the acceleration of an object is directly proportional to the force applied to it and inversely proportional to its mass.

The initial force acting on the body is 45 N, and the frictional force opposing its motion is 7.5 N. Therefore, the net force acting on the body is:

Net force = 45 N - 7.5 N = 37.5 N

Using Newton's second law of motion, we can calculate the acceleration of the body:

Acceleration = Net force / Mass = 37.5 N / 80 kg = 0.469 m/[tex]s^{2}[/tex]

Now, to find the time taken by the body to stop, we can use the equation of motion:

v = u + at

where v is the final velocity, u is the initial velocity (which is zero), a is the acceleration, and t is the time taken.

When the force acting on the body becomes zero, the body continues to move with the same velocity until it comes to a stop. Therefore, the final velocity is also zero.

0 = 0 + 0.469 * t

t = 0 / 0.469 = 0 seconds

Learn more about Velocity from given link

https://brainly.com/question/24445340

#SPJ1

The drag force of a boat with a wet surface area of 60ft² and traveling at 7.5mph is approximately 137.72N.

We know that the drag force F varies jointly with the wet surface area A and the square of the speed S. We can express this relationship as F = kAS², where k is a constant of proportionality.

To find k, we can use the given information: A = 50ft², S = 7mph, and F = 98N. Plugging these values into the formula, we get 98 = k(50)(7²). Solving for k, we find that k ≈ 0.04.

Now, we can find the drag force for a boat with a wet surface area of 60ft² and traveling at 7.5mph. Using the formula F = kAS² and the calculated k value, we get F = 0.04(60)(7.5²). Calculating this, we find that the drag force is approximately 137.72N.

To know more about drag force click on below link:

https://brainly.com/question/12774964#

#SPJ11

The magnetic force will act on the charge carrier in a direction perpendicular to both the magnetic field direction and the velocity direction of the charge carrier.

In this scenario, the magnetic field points along the y-axis in a positive direction, and the charge carrier moves along the z-axis in a negative direction. Since the velocity of the charge carrier is in the same direction as the z-axis, the direction of the magnetic force acting on the charge carrier will be perpendicular to both the y-axis and the z-axis.

To determine the direction of the magnetic force, we can use the right-hand rule. If we point the thumb of our right hand in the direction of the velocity of the charge carrier (i.e., along the negative z-axis), and the fingers in the direction of the magnetic field (i.e., along the positive y-axis), then the direction of the magnetic force will be perpendicular to both and will be directed towards the negative x-axis.

Therefore, the magnetic force acting on the charge carrier will be directed towards the negative x-axis.

To know more about magnetic force, refer here:

https://brainly.com/question/3160109#

#SPJ11

The air temperature at the diffuser exit is approximately 79 degC.

We can use the conservation of energy equation to determine the temperature of the air at the diffuser exit, assuming ideal gas behavior. The conservation of energy equation can be written as;

(1/2) × m × v₁² + m × c × T₁ = (1/2) × m × v₂² + m × c × T₂

where m is the mass of the air, v₁ and v₂ are the velocities of the air at the inlet and outlet of the diffuser, respectively, c is the specific heat capacity of air at constant pressure, T₁ is the initial temperature of the air, and T₂ is the temperature of the air at the diffuser exit.

Since the air is slowed down to essentially zero velocity at the diffuser exit, we can assume that v₂ is zero. Thus, the conservation of energy equation becomes;

(1/2) × m × v₁² + m × c × T₁ = m × c × T₂

Simplifying and rearranging the equation, we get;

T₂ = T₁ + (v₁² / (2 × c))

We are given that the initial temperature T₁ is 37 degC and the velocity v₁ is 300 m/s. The specific heat capacity of air at constant pressure, c, is approximately 1005 J/(kg·K), and the molar mass of air, Mair, is approximately 28.97 g/mol.

Converting the velocity to SI units (m/s) and the temperature to Kelvin, we get;

T₁ = 37 + 273 = 310 K

v₁ = 300 m/s

Put these values into equation for T₂, we have;

T₂ = 310 + (300² / (2 × 1005)) = 352 K

Converting the temperature back to degrees Celsius, we get;

T₂ = 352 - 273

= 79 degC

To know more about conservation of energy here

https://brainly.com/question/2137260

#SPJ4

The pencil will be magnified by a factor of 2.665.

To find the image distance for a concave mirror with a focal length of 0.32m when a pencil is placed 0.2m in front of it, we can use the mirror equation:

1/f = 1/di + 1/do

where:

f = focal length of the mirror = -0.32m (negative because it's a concave mirror)

di = image distance (unknown)

do = object distance = -0.2m (negative because the object is placed in front of the mirror)

Plugging in the values:

1/-0.32 = 1/di + 1/-0.2

Simplifying:

-3.125 = 1/di - 5

1/di = -3.125 + 5

1/di = 1.875

di = 1/1.875

di = 0.533m

Therefore, the image distance is 0.533m.

To find the magnification, we can use the formula:

magnification (m) = - di / do

Plugging in the values:

m = -0.533m / -0.2m

Simplifying:

m = 2.665.

Learn more about concave mirror here:

https://brainly.com/question/3359672

#SPJ1

To solve this problem, we need to use the principle of conservation of angular momentum. Since there are no external torques acting on the system, the total angular momentum of the system is conserved.

(a) The net torque on the system about the axle of the pulley is equal to the torque due to the force of gravity on the counterweight minus the torque due to the tension in the string.

The torque due to the force of gravity is given by τ_gravity = m g R, where m is the mass of the counterweight, g is the acceleration due to gravity, and R is the radius of the pulley.

The torque due to the tension in the string is given by τ_tension = T R, where T is the tension in the string. The direction of the net torque is counterclockwise, since the torque due to the force of gravity and the torque due to the tension are in opposite directions.

Therefore, the net torque on the system about the axle of the pulley is:

τ_net = τ_gravity - τ_tension = m g R - T R

(b) The total angular momentum of the system about the axle of the pulley is given by L = I ω, where I is the moment of inertia of the pulley and ω is the angular speed of the pulley. The moment of inertia of a solid cylinder of radius R and mass M is given by I = (1/2) M R^2.

Therefore, the magnitude of the total angular momentum of the system about the axle of the pulley is:

L = (1/2) M R^2 ω = (1/2) M R v

(c) Using the formula T = dL/dt, we can find the torque required to produce the change in angular momentum dL/dt, which is equal to I a, where a is the acceleration of the counterweight. Since there are no external torques acting on the system, the torque due to the tension in the string is equal in magnitude and opposite in direction to the torque due to the force of gravity on the counterweight. Therefore, we have:

T = m g

Substituting T = m g and dL/dt = I a into the formula T = dL/dt, we get:

m g = I a

Substituting I = (1/2) M R^2 and L = (1/2) M R v into the expression for dL/dt, we get:

m g = (1/2) M R (d/dt)(v^2)

Taking the derivative of v^2 with respect to time t, we get:

(d/dt)(v^2) = 2 v (d/dt)(v) = 2 a R

Substituting this expression into the equation for the torque, we get:

m g = M R a

Solving for a, we get:

a = (m g)/(M R)

Substituting the given values, we get:

a = (0.60 kg) * (9.81 m/s^2)/(2.5 kg * 0.10 m) ≈ 23.5 m/s^2

Therefore, the magnitude of the acceleration of the counterweight is approximately 23.5 m/s^2.

To learn more about angular momentum here:

https://brainly.com/question/29897173

#SPJ11

The maximum speed attained by the rod as it falls is 0.181 m/s.

To calculate this, we first need to find the terminal velocity of the rod in the oil. We can use the equation:

Terminal velocity (v) = (2 * weight) / (drag coefficient * fluid density * cross-sectional area * tube diameter)

1. Convert the rod's mass (150 g) to weight (W) using the equation W = mg, where m = 0.15 kg and g = 9.81 m/s². W = 0.15 * 9.81 = 1.4715 N.

2. Determine the cross-sectional area (A) of the rod using the equation A = π(d²) / 4, where d = 0.009 m (0.900 cm converted to meters). A = π(0.009²) / 4 = 6.362 x 10⁻⁵ m².

3. Find the SAE 10 motor oil density (ρ) which is approximately 870 kg/m³ and its drag coefficient (C_d) is about 0.47.

4. Plug the values into the terminal velocity equation: v = (2 * 1.4715) / (0.47 * 870 * 6.362 x 10⁻⁵ * 0.01) = 0.181 m/s.

To know more about terminal velocity click on below link:

https://brainly.com/question/2654450#

#SPJ11

To calculate the velocity of the car in m/s, we first need to convert the initial velocity from km/h to m/s.

90 km/h = (90 x 1000) / 3600 m/s = 25 m/s (rounded to the nearest whole number)

Next, we can use the formula for velocity:

v = u + at

where v is the final velocity, u is the initial velocity, a is the acceleration, and t is the time taken. Since the car comes to a stop, the final velocity is zero. The acceleration can be calculated using the formula:

a = (v-u)/t = (0 - 25)/1.5 = -16.67 m/s²

Substituting the values into the first formula, we get:

0 = 25 + (-16.67) x t

Solving for t, we get:

t = 1.5 seconds

Therefore, the velocity of the car in m/s is zero, since it comes to a complete stop.

To know more about  initial velocity, visit:

https://brainly.com/question/9365999

#SPJ1

The force of interaction between a current and a magnetic field is known as the Lorentz force, and it is directly proportional to the angle between the two.

So, when the angle between the current and the magnetic field increases, the force acting between them also increases. This is because the Lorentz force is perpendicular to both the current and the magnetic field, and its magnitude is proportional to the product of the current and the magnetic field strength.

When the angle between the current and the magnetic field increases, the product of the current and the magnetic field strength also increases, leading to a greater force of interaction. On the other hand, when the angle between the two decreases, the force of interaction also decreases.

know more about Lorentz force here

https://brainly.com/question/15552911#

#SPJ11

The transition from energy level 4 to energy level 2 contributes to an absorption spectrum, while the transitions from energy level 3 to energy level 1 and from energy level 2 to energy level 1 contribute to an emission spectrum.

An energy level diagram for an atom shows the different energy levels that electrons can occupy in the atom. It stands for the force needed to transfer an electron from one energy level to another.

The frequency and wavelength of a photon are inversely proportional to each other, meaning that as one increases, the other decreases. A photon's energy is directly inversely correlated with its wavelength and directly correlated with its frequency.

Higher frequency photons have more energy than lower frequency photons, and shorter wavelength photons have more energy than longer wavelength photons.

To know more about atom,visit:

https://brainly.com/question/30898688

#SPJ1

Electrons in subshells closer to the nucleus will feel the greatest effective nuclear charge.

This is because electrons further from the nucleus are partially shielded by the inner electrons and experience a weaker net positive charge. Among electrons in the same principal energy level, the subshell with the highest azimuthal quantum number (l) will feel the greatest effective nuclear charge, because the higher l value corresponds to more angular nodes in the electron probability distribution and hence less shielding by inner electrons.

Therefore, electrons in subshells with a high azimuthal quantum number and low principal quantum number will feel the greatest effective nuclear charge. For example, electrons in the 2p subshell will feel a greater effective nuclear charge than electrons in the 2s subshell.

To know more about electrons, here

brainly.com/question/13752984

#SPJ4

The masses of the two objects are 2.92 kg and 2.16 kg, respectively. They attract each other with a gravitational force of magnitude 1.01 10-8 N when the distance between then in 19.7 cm.

Given that: F = 1.01 × 10^-8 N, r = 19.7 cm = 0.197 m, and m1 + m2 = 5.08 kg. Therefore, using the formula for gravitational force: F = Gm1m2 / r²

Where,

F is the force of gravitational attraction between the two objects,

m1 and m2 are the masses of the two objects,

G is the universal gravitational constant (6.674 × 10^-11 Nm^2/kg^2), and

r is the distance between the centers of the objects.

The mass of each object can be found by solving for m1 or m2 from the above equation. So, rearranging the above equation, we get:

m1 = Fr² / Gm2

Substituting the given values, we get:

m1 = (1.01 × 10^-8 N) × (0.197 m)² / (6.674 × 10^-11 Nm^2/kg^2) × (5.08 kg - m1).

On simplifying, we get:

m1 = 2.92 kg

Therefore, the mass of the other object (m2) can be found as follows:

m2 = 5.08 kg - m1 = 5.08 kg - 2.92 kg = 2.16 kg.

Therefore, the masses of the two objects are 2.92 kg and 2.16 kg, respectively found using gravitational force formula.

Know more about gravitational force here:

https://brainly.com/question/12528243

#SPJ11