A 2.0 kg particle moving along the z-axis experiences the
force shown in (Figure 1). The particle's velocity is
3.0 m/s at x = 0 m.
A) At what point on the x axis does the particle have a turning point?

Explanation:

Fgravity = G*(mass1*mass2)/D².

G is the gravitational constant, which has the same value throughout our universe.

D is the distance between the objects.

so, if you triple one of the masses, what does that do to our equation ?

Fgravitynew = G*(3*mass1*mass2)/D²

due to the commutative property of multiplication

Fgravitynew = 3* G*(mass1*mass2)/D² = 3* Fgravity

so, the right answer is 3×12 = 36 units.

The volume of a material is the total amount of matter that it can contain. The volume of the given coin has been determined to be 5.85 x [tex]10^{-6}[/tex] [tex]m^{3}[/tex]. Since the gold doubloon do not absorb water, then its volume remains constant at the ocean floor.

The volume of the gold doubloon can be determined by;

volume = [tex]\pi r^{2}[/tex] + h

where r is the radius of the coin and h is its thickness.

Such that; diameter = 6.1 cm (61 mm) and h = 2.0 mm

r = [tex]\frac{diameter}{2}[/tex]

 = [tex]\frac{61}{2}[/tex]

r = 30.5 mm

Thus,

volume of the coin = [tex]\frac{22}{7}[/tex] x [tex](30.5)^{2}[/tex] x 2

                               = 5847.2857

Therefore, the volume of the gold doubloon is 5847.3 [tex]mm^{3}[/tex]. This can also be expressed as 5.85 x [tex]10^{-6}[/tex] [tex]m^{3}[/tex].

Since the gold doubloon is  not miscible with water, thus its volume at a depth of 770 m at the ocean floor is the same as its initial volume.

Visit: https://brainly.com/question/14232630

The elevation at the top of the hill is 1,653.85 m.

The given parameters;

The elevation at the top of the hill is calculated as follows;

[tex]P.E = mg\Delta h\\\\P.E = mg(h_2 -h_1)\\\\h_2 -h_1 = \frac{P.E}{mg} \\\\h_2 = \frac{P.E}{mg} + h_1\\\\h_2 = \frac{9.2 \times 10^5 }{72 \times 9.8} \ + \ 350 \ m\\\\h_2 = 1,653.85 \ m[/tex]

Thus, the elevation at the top of the hill is 1,653.85 m.

Learn more here:https://brainly.com/question/24515193

Answer:

The angle of incidence = The angle of reflection

Explanation:

For instance, the formula is <i = <r which means if the surface is smooth then the reflacted anglw will be equal according to the normal (dotted 90°) line.

Upon being reflected backwards the angle of incidence is simply the same, except from the other side

Addition of a proton to germanium  will convert it to arsenic (element 33) having different properties.

The atomic number of an atom is the number of protons in the nucleus of the atom. The atomic number serves as the identity of an atom. If the atomic number is changed by adding or removing protons, the identity of that atom changes.

Hence, when a proton is added to germanium, the  atom would become arsenic (element 33) and have different properties.

Learn more: https://brainly.com/question/14281129

Answer: Its B and D

I had the same question on usatestprep

Answer:

Cement, iron, and steel all work great!

After time t, the position function of the ball is determined as [tex]y(t) = h_0\ +\ v_0t \ - \ \frac{1}{2} gt^2[/tex]

The given parameters;

The position function of the ball after time t, is calculated as follows;

[tex]y(t) = h_0\ +\ v_0t \ - \ \frac{1}{2} gt^2[/tex]

The negative sign of acceleration of due to gravity is because the ball is moving upward against gravity.

Thus, after time t, the position function of the ball is determined as [tex]y(t) = h_0\ +\ v_0t \ - \ \frac{1}{2} gt^2[/tex]

Learn  more here:https://brainly.com/question/12666534

Answer:

c.

Explanation:

If the two plates that meet at a convergent plate boundary both are of oceanic crust, the older, denser plate will subduct beneath the less dense plate. The older plate subducts into a trench, resulting in earthquakes. Melting of mantle material creates volcanoes at the subduction zone.

When two oceanic plates converge, the denser plate will end up sinking below the less dense plate, leading to the formation of an oceanic subduction zone. Old, dense crust tends to be subducted back into the earth. An example of a subduction zone formed from a convergent boundary is the Chile-Peru trench….

Answer:

a divergent plate boundary

Answer:

200J

Explanation:

work done = force x distance

                  = 20 x 10

                  = 200J

Answer:

Explanation:

Normal force of the surface on the box will be

N = mg - Fsinθ

Ν = 10(9.8) - 600sin37

N = -263

As normal force cannot be less than zero, the applied force lifts the crate off the surface.

Now it's just a matter of finding the acceleration

In the horizontal direction, the acceleration is

a = F/m

a = (600cos37) / 10

a =  47.9181... m/s²

the crate weight is mg = 10(9.8) = 98 N.

In the vertical direction the acceleration is

a = ((600sin37 - 98) / 10)

a = 26.3089... m/s²

total acceleration is

a = √(47.9181² + 26.3089²)

a = 54.6653... m/s²

s = ½at²

t = √(2s/a)

t = √(2(1.0)/54.6653)

t = 0.19127...

t = 0.19 s

Answer:

A straight wire in a magnetic field experiences a force of 0.022 N when the current in the wire is 1.1 A. The current in the wire is changed ...

1 answer

·

Top answer:

The magnetic force that acts on the wire in the first case can be written as

Explanation:

Randall has an unconscious assumption that attractive people are more competent.

The term assumption can be described as an unspoken premise that underlies the conclusion.

Here,

The capacity to accurately evaluate and draw conclusions about other individuals based on their overall physical appearance, verbal behaviour, and nonverbal attitudes is referred to as social perception.

Given that, for his restaurant, Randall is employing chefs. The first applicant is a dashing man with an average resume and career history. The second candidate is a far less appealing man with an average to slightly above average resume and work experience. Randall chooses to hire the first candidate.

This shows the social perception of Randall and his unconscious assumptions against unattractive people.

Hence,

Randall has an unconscious assumption that attractive people are more competent.

To learn more about assumption, click:

https://brainly.com/question/28586425

#SPJ2

Answer:

4600 Kg/m³

Explanation:

Volume of block=5m³

Mass of block= 920 kg/m³

Density=mass × volume

=920 × 5³

=4600 /m³

The density of ice is 4600 Kg/m³

___________________________________

(Hope this helps can I pls have brainlist (crown)☺️)

Explanation:

Solution:

Here

volume=5

Density=920

Density =Mass/Volume

or,Mass=Density*Volume

or,M=920*5

so,M=4600kg

The applied torque increases the angular speed by the application of an

angular acceleration.

Reasons:

The speed of the flywheel at the axis = 4 rev/s

The torque applied, T = 25 N·m

The time the torque is applied, t = 10 sec

Moment of inertia of the flywheel, I = 1.2 kg·m²

Required:

The speed at the end of the 10 seconds

Solution:

T = I·α

Where;

α = Angular acceleration

[tex]\displaystyle \alpha = \frac{T}{I}[/tex]

Therefore;

[tex]\displaystyle \alpha = \frac{24 \ N\cdot m}{1.2 \ kg \cdot m^2} = \mathbf{20\frac{5}{6} \ s^{-2}}[/tex]

The rotational speed, ω = ω₀ + α·t

Which gives;

[tex]\displaystyle \mathrm{The \ angular \ speed, } \ \omega = \frac{2 \cdot \pi \times 4 \ rad }{s} = \frac{8 \cdot \pi \ rad }{s}[/tex]

ω₀ = 8·π rad/s

Which gives;

[tex]\displaystyle \omega = \mathbf{8 \cdot \pi +2 \frac{5}{6} \times 10} = 233.47[/tex]

The speed of the wheel in revolution per second is therefore;

[tex]\displaystyle Speed \ in \ rev/s = \frac{8 \cdot \pi +2 \frac{5}{6} \times 10}{2\cdot \pi} \approx 37.16[/tex]

The speed after 10 seconds is approximately 37.16 rev/s.

Learn more here:

https://brainly.com/question/14548366

Answer:

d = -33.1 m and Vf = -25.5 m/s

Explanation:

a = -9.8 m

t = 2.6 s

Vᵢ = 0 m/s

d = ?

Vf = ?

Now,

d = Vᵢ × t + 0.5 × a × t²

d = (0 m/s) × (2.60 s) + 0.5 × (-9.8 m/s²) × (2.60 s)²

d = -33.1 m (- indicates direction)

Vf = Vᵢ + a × t

Vf = 0 + (-9.8 m/s²) × (2.60 s)

Vf = -25.5 m/s (- indicates direction)

Thus, d = -33.1 m and Vf = -25.5 m/s

-TheUnknownScientist 72

Answer:

In space we feel weightlessness because the earth's gravity has less effect on us. The Earth's gravitational attraction at those altitudes is only about 11% less than it is at the Earth's surface. If you had a ladder that could reach as high as the shuttle's orbit, your weight would be 11% less at the top.

Explanation:

Hope this helps:)

Answer:

Albert Einstein WAS a very well known Theoretical physicist

The USA claims he did not ever get his hands directly on an atomic bomb but in fact, other country textbooks like in Germany say he did.

Explanation:

A fun fact is that he was hired by the United States to make the Atomic bomb. Albert Einstein was a german yet many believed him to be a Smart American, they were wrong.

Answer:

The acceleration of the car is 8.10 m/s²

Explanation:

d = 110 m

t = 5.21 s

vi = 0 m/s

a = ?

d = Vᵢ × t + 0.5 × a × t²

110 m = (0 m/s) × (5.21 s) + 0.5 × (a) × (5.21 s)²

110 m = (13.57 s²) × a

a = (110 m)/(13.57 s²)

a = 8.10 m/s²

Thus, The acceleration of the car is 8.10 m/s²

-TheUnknownScientist 72

Answer:

C number is write i think

Answer:

15[m].

Explanation:

1) the required distance is AD, for more info see the attached picture.

2) [tex]AD=\sqrt{AA_1^2+A_1D^2} =\sqrt{81+144}=15[m].[/tex]

Answer:

how long does it take? we need it to answer ure question

Explanation:

cause we don't know how many feet until we know how long it was falling

If a  stone is dropped from the edge of a roof and hits the ground with a velocity of -150 feet per second, then the height of the roof would have been 1148 feet.

There are three equations of motion given by  Newton

v = u + at

S = ut + 1/2 × a × t²

v² - u² = 2 × a × s

As given in the problem, a penny is dropped from a building that is 95 m tall, the initial velocity of the penny is zero, and the acceleration acting is due to the acceleration due to gravity,

By using the second  equation of the motion for the vertical motion ,

v²  = ( 2 × g ×h )

150²  = 2 × 9.8 × h

h = 22500 / 19.6

  = 1148 feet

Thus, the height of the roof would have been 1148 feet.

To learn more about equations of motion here, refer to the link given below ;

brainly.com/question/5955789

#SPJ2

Answer:

A. 2.7 m/s

Explanation:

Answer:

[tex]\boxed {\boxed {\sf A. \ 2.7 \ m/s}}[/tex]

Explanation:

We want to find how fast a branch is falling after 0.28 seconds.

Essentially, we want to find its final velocity at exactly 0.28 seconds. We will use the following kinematic equation:

[tex]v_f= v_i+at[/tex]

The branch fell from the tree, so it initially started at rest or 0 meters per second. The branch is in free fall, so its acceleration is due to gravity, or 9.8 meters per second squared. It falls for 0.28 seconds.

Substitute the values into the formula.

[tex]v_f= 0 \ m/s + (9.8 \ m/s^2)(0.28 \ s)[/tex]

Multiply the numbers in parentheses.

[tex]v_f= 0 \ m/s +(9.8 \ m/s/s * 0.28 \ s )[/tex]

[tex]v_f= 0 \ m/s +2.744 \ m/s[/tex]

Add.

[tex]v_f= 2.744 \ m/s[/tex]

The original measurement of time has 2 significant figures, so our answer must have the same. For the number we found, that is the tenth place. The 4 in the hundredth place tells us to leave the 7.

[tex]v_f \approx 2.7 \ m/s[/tex]

The branch is moving at a velocity of approximately 2.7 meters per second.

The answer is C) kilogram

The SI unit in the given options is kilogram, the correct option is C.

The most common unit of measurement is the standard unit. These units are standardized, which means that everyone understands an object's size, weight, and other properties.

Standard Units of Measurement have fixed values that cannot be changed.

The International System of Units, abbreviated SI in all languages and sometimes pleonastically as the SI system, is the modern version of the metric system and the world's most widely used measurement system.

The SI is a coherent system of units of measurement that begins with seven base units: the second (symbol s, the unit of time), the metre (m, length), the kilogram (kg, mass), the ampere (A, electric current), and so on.

Thus, the correct option is C.

For more details regarding SI units, visit:

https://brainly.com/question/12750330

#SPJ2

The magnitude of the total initial velocity of the rocket is determined as 9.82 m/s.

The magnitude of the total initial velocity of the rocket is calculated as follows;

V = D/T

where;

V = (54)/(5.5)

V = 9.82 m/s

Thus, the magnitude of the total initial velocity of the rocket is determined as 9.82 m/s.

Learn more about velocity here: https://brainly.com/question/4931057

#SPJ2

Answer:

two of the same instrument playing notes at slightly different frequencies

Explanation:

The correct answer is two of the same instrument playing notes at slightly different frequencies.

Frequency is the number of occurrences of a periodic event per unit of time. In the context of sound waves, frequency refers to the number of complete cycles of a sound wave that occur in one second and is measured in units of Hertz (Hz).

In this question,

A beat frequency occurs when two sound waves with slightly different frequencies interfere with each other, resulting in a periodic variation in the amplitude of the resulting wave. The beat frequency is equal to the difference in frequency between the two original sound waves.

When two of the same instrument play notes at slightly different frequencies, the sound waves produced by each instrument will have slightly different frequencies due to differences in tuning or other factors. When the two sound waves interfere with each other, they will produce a beat frequency equal to the difference between their frequencies. This beat frequency will be audible as a periodic variation in the loudness or intensity of the sound.

In the other statements, There will not be any beat frequency because the sound waves being produced have either the same frequency or very different frequencies, which do not interfere with each other in a way that produces beats.

Therefore, The statement two of the same instrument playing notes at slightly different frequencies is correct.

To learn more about the Doppler effect click:

https://brainly.com/question/3795295

#SPJ3

The characteristics of the expression of the simple harmonic motion allows to find the results for the expression of the mass- block system are:

     A) The constant Ces: C = xinit

     B) The ocsntna S is: S = 0

     C) The equation of the system is: x = xinit cos wt

     D) If the reference system is at some extreme, the equation is:

              [tex]L - x_{init} = x_{init} \ cos \ wt[/tex]  

The simple harmonic movement is an oscillatory movement where the restoring force is proportional to the displacement, the general equation that describes this movement is indicated.

          x = C cos wt + S sin wt

Where x is the displacement C and S are constants. W the angular velocity and t the time.

A) The initial position of the body occurs when the time is zero, t = 0

We substitute.

           x = C cos 0 + S sin 0

           [tex]x_{init}[/tex] = C

B) The velocity of the particle is defined.

          [tex]v= \frac{dx}{dt} \\ v= C w \ sin \ wt - Sw \ cos \ wt[/tex]  

The initial velocity occurred for time zero t = 0

          v = - S w

It indicates that the initial velocity is zero, since the angular velocity must be different from zero, it implies that the constant is valid.

          S = 0

C) The equation for the block remains.

           x (t) = [tex]x_{init} \ cos \ wt[/tex]  

D) In ​​some cases it is measured with respect to another reference system, the most common are:

In these cases, the change that must be made is

          x =  [tex]L - x_{min}[/tex] t

we substitute

          [tex]L - x_{init} = x_{init} \ cos \ wt[/tex]  

          L = [tex]x_{init}[/tex]  (1 + cos wt)

In conclusion, using the characteristics of the expression of the simple harmonic motion we can find the results for the expression of the mass- block system are:

    A) The constant Ces: C = xinit

     B) The ocsntna S is: S = 0

     C) The equation of the system is: x = xinit cos wt

     D) If the reference system is at some extreme, the equation is:

              [tex]L - x_{init} = x_{init} \ cos \ wt[/tex]  

Learn more about simple harmonic motion here:  brainly.com/question/17315536

The acceleration of the SRB and main engine during the first 2.0 minutes of flight is 52.16 m/s².

The given parameters;

The acceleration of the SRB and main engine is calculated as follows;

[tex]a = \frac{\Delta v}{\Delta t } \\\\a = \frac{7600 - 1341}{2 \times 60 s} \\\\a = 52.16 \ m/s^2[/tex]

Thus, the acceleration of the SRB and main engine during the first 2.0 minutes of flight is 52.16 m/s².

Learn more here:https://brainly.com/question/17067013