The oxidation state of nitrogen changes from 0 to -2. The number of electrons transferred in the reaction are equal to two.
We have a chemical reaction present below, [tex]N_2 + {2 CIO_3}^{-} + H_2O -->{ 2 CIO_4 }^{-} + N_2H_4 \\ [/tex]
We have to determine change in the oxidation state of nitrogen in reaction and total number of electrons transferred in the reaction. Now, first we determine the oxidation state of N in reactants and products side. The oxidation state of Nitrogen, N in reactants is equals to zero. In case of product side, N₂H₄, 2x + 4(1) = 0, where x is oxidation state of N in N₂H₄ ,
=> 2x = -4
=> x = -2
Hence, oxidation state is -2 and total 2 electrons transferred in the above reaction.
For more information about electrons, visit :
https://brainly.com/question/28337734
#SPJ4
Complete question:
[tex]N_2 + {2 CIO_3}^{-} + H_2O -->{ 2 CIO_4 }^{-} + N_2H_4 \\ [/tex], in the above reaction, the oxidation state of nitrogen changes from__ to __.
how many electrons are transferred in the reaction?
a farmer notices that the nitrates (no3) from his fertilizer are disappearing rapidly from his soil. this could be due to:
The farmer noticed that the nitrates (NO3) from his fertilizer are disappearing rapidly from his soil. This could be due to several reasons, including: Leaching, Denitrification, Plant Uptake.
Leaching: This is the process whereby nitrates are washed away from the soil by rainfall or irrigation. When there is heavy rainfall or excessive watering, nitrates can be washed away from the topsoil, leaving the plants without the required nutrients.
Denitrification: This is a process whereby bacteria in the soil break down nitrates into nitrogen gas, which is released into the atmosphere. This process can occur in poorly drained soil, which is waterlogged and lacks sufficient oxygen to support plant growth.
Plant Uptake: Nitrogen is a vital nutrient for plant growth, and plants require it to develop leaves, stems, and roots. When plants absorb the nitrogen from the soil, the nitrates in the soil reduce significantly.In conclusion, several factors could lead to the rapid disappearance of nitrates from the soil. The farmer needs to understand the primary cause of the problem to address it effectively. Leaching, denitrification, and plant uptake are some of the reasons the nitrates could be disappearing rapidly from the soil.
for more such question on fertilizer
https://brainly.com/question/24782241
#SPJ11
What is the Molarity of a 6.3 L dilution of a 0.99Molar solution 3.4 L
Answer:
To solve this problem, we can use the dilution formula: M1V1 = M2V2 Where M1 is the initial molarity, V1 is the initial volume, M2 is the final molarity, and V2 is the final volume. We are given that the initial molarity is 0.99M and the initial volume is 3.4 L. We can use this information to find M2: M1V1 = M2V2 (0.99M)(3.4 L) = M2(6.3 L) M2 = (0.99M)(3.4 L) / (6.3 L) M2 = 0.5357 M Therefore, the molarity of a 6.3 L dilution of a 0.99M solution with an initial volume of
Answer:
0.534 M.
Explanation:
Molarity is a measure of the concentration of a solution, defined as the number of moles of solute per liter of solution. When a solution is diluted by adding more solvent, the number of moles of solute remains the same, but the volume of the solution increases, resulting in lower molarity.
In this case, you have a 3.4 L solution with a molarity of 0.99 M. This means that the number of moles of solute in this solution is 3.4 L * 0.99 mol/L = 3.366 moles.
If you dilute this solution to a final volume of 6.3 L by adding more solvent, the number of moles of solute remains the same (3.366 moles), but the volume has increased to 6.3 L. So the molarity of the diluted solution is 3.366 moles / 6.3 L = 0.534 M.
A 74.28-g sample of Ba(OH) is dissolved in enough water fo make 2.450 liters of solution. How
627871
many mL of this solution must be diluted with water in order to make 1.000 L of 0.100 M Ba(OH)?
565 mL of this solution must be diluted with water in order to make 1.000 L of 0.100 M [tex](Ba(OH) _{2} )[/tex].
Mass of [tex](Ba(OH) _{2} )[/tex] = 72.28 g
Volume of solution = 2.450 L
Molarity of water = 0.1 mole/L
Volume of water = 1000 L
To begin with, we must count the moles of Ba (OH)2 in the original solution:
[tex]n(Ba(OH) _{2} )[/tex] = 171.34g/mol/74.28g
=0.4335mol
0.100 moles of [tex](Ba(OH) _{2} )[/tex] are needed to make 1.000 L of a 0.100M [tex](Ba(OH) _{2} )[/tex] solution.
As a result, the starting solution's volume that has to be diluted is equal to:
V=2.450L× 0.4335mol/0.100mol
=0.565L
0.565*1000ml
=565mL
Learn more about solution here:
https://brainly.com/question/11691027
#SPJ4
Complete question:
A 74.28-g sample of Ba (OH)2 is dissolved in enough water to make 2.450 liters of solution. How many mL of this solution must be diluted with water in order to make 1.000 L of 0.100 M Ba(OH)2?
Under a pressure of 862 kPa, a gas has a volume of 752 cm^3. The pressure is increased, without changing the temperature, until the volume is 624 cm^3. What is the new pressure?
Boyle's Law states that a gas's pressure and volume are inversely related at a given temperature. Therefore, P1V1 = P2V2. The new pressure is 1037.05 kPa as a result.
What is the pressure of a gas with a 725 ml volume?The pressure of a gas with a volume of 725 mL and a pressure of 0.970 atm is allowed to increase while maintaining a constant temperature.
To determine the new pressure, we can plug in the indicated values:
P1 = 862 kPa, V1 = 752 cm³, V2 = 624 cm³
P1V1 = P2V2
862 kPa x 752 cm³ = P2 x 624 cm³
647024 = 624P2
P2 = 647024/624
P2 = 1037.05 kPa
To know more about Boyle's Law visit:-
https://brainly.com/question/30367133
#SPJ1
if two separate chambers, a and b, have the same volume and contain the same number of moles, but container a is held at a higher temperature than b. container a will have:
If two separate chambers, a and b, have the same volume and contain the same number of moles, but container a is held at a higher temperature than b, container a will have a greater pressure.
Pressure is defined as force per unit area, and it is the perpendicular force exerted by a gas per unit area of the container's surface. The temperature of a gas is directly proportional to the average speed of its particles because they have more kinetic energy when they are warmer. When the temperature of the gas is raised, its particles gain more kinetic energy, and the gas's average velocity rises.Pressure is affected by temperature because the kinetic energy of gas molecules affects how often they collide with one another and with the container walls.
As a result, if two separate chambers, a and b, have the same volume and contain the same number of moles, but container a is held at a higher temperature than b, container a will have a greater pressure.
For more such questions on Pressure
https://brainly.com/question/3328692
#SPJ11
write the net ionic equation for the acid-base hydrolysis equilibrium that is established when ammonium nitrate is dissolved in water. (use h3o instead of h .)
The net ionic equation for the acid-base hydrolysis equilibrium that is established when ammonium nitrate is dissolved in water is given below:Answer: NH4+(aq) + H2O(l) ⇌ H3O+(aq) + NH3(aq) + NO3-(aq).
The ionic equation is a chemical equation in which the electrolytes in aqueous solution are represented by their actual ions rather than their complete formulas. It indicates that ions undergo a chemical reaction to produce a new compound.
The net ionic equation displays the actual chemical reaction taking place in an aqueous solution. It is derived by eliminating spectator ions, which do not play any active role in the chemical reaction.The acid-base hydrolysis equilibrium is as follows:NH4+(aq) + H2O(l) ⇌ NH3(aq) + H3O+(aq).
The ammonium ion hydrolyzes to form ammonium ion and hydronium ions. The nitrate ion is a spectator ion that does not participate in the reaction. Therefore, the net ionic equation is given by:NH4+(aq) + H2O(l) ⇌ H3O+(aq) + NH3(aq).
To know more about ionic equation refer to-
brainly.com/question/29299745#
#SPJ11
a salt bridge . a. is made up of an aqueous ionic compound b. has positive ions that are attracted to the cathode c. has negative ions that are attracted to the anode d. allows the reaction of the galvanic cell to continue e. all of the above
The correct answer is: "e. all of the above." A salt bridge is an essential component of a galvanic cell. It is made up of an aqueous ionic compound that allows the reaction of the galvanic cell to continue.
The salt bridge contains positive ions that are attracted to the cathode and negative ions that are attracted to the anode.
By allowing ions to flow between the two half-cells of the galvanic cell, the salt bridge prevents the buildup of charge that could halt the reaction.
This ensures that the cell can continue to produce electrical energy until the reactants are fully consumed.
To know more about salt bridge, refer here:
https://brainly.com/question/2861410#
#SPJ11
tech a states that overheated catalysts cannot be restored and must be replaced. tech b states that overheated catalysts can be easily restored by driving the vehicle for an extended time under a moderate load. who is correct?
Tech A is correct who says that overheated catalysts cannot be restored and must be replaced.
In chemistry, a catalyst is any substance that speeds up a reaction without consuming itself. Many crucial biochemical reactions are catalysed by enzymes, which are substances that occur naturally.
The majority of solid catalysts are made of metals, or the oxides, sulphides, and halides of metals, as well as of the semimetallic elements silicon, aluminium, and boron. Solid catalysts are frequently dispersed in materials known as catalyst supports, while gaseous and liquid catalysts are typically used in their pure form or in combination with appropriate carriers or solvents.
Visit here to learn more about the catalyst: https://brainly.com/question/24430084
#SPJ4
Theo watches the Moon every night for four weeks. He notices that
Theo watches the Moon every night for four weeks, he notices that how the Moon's position in the sky changes over time.
What does Theo notice ?Here are some things that Theo might observe or learn about the Moon:
The Moon's phases: By watching the Moon every night for four weeks, Theo would likely observe the changing phases of the Moon as it orbits the Earth. The Moon goes through a complete cycle of phases roughly once a month, which includes the new moon, waxing crescent, first quarter, waxing gibbous, full moon, waning gibbous, third quarter, and waning crescent.
The Moon's position in the sky: Theo might also notice how the Moon's position in the sky changes over time. The Moon rises and sets at different times each night, and its position in the sky also changes depending on its phase and location relative to the horizon.
The Moon's motion: By observing the Moon's position in the sky each night, Theo might notice that the Moon appears to move relative to the stars.
To know more about Moon, refer
https://brainly.com/question/1286359
#SPJ1
. consider a buffer solution that contains a mixture of aqueous hcn and kcn. a. write the net ionic equation for the reaction that occurs when a few drops of hcl are added to the solution. b. write the net ionic equation for the reaction that occurs when a few drops of naoh are added to the solution
The ionic equations are as follows:
[tex]H^{+} (aq) + CN^{-} (aq) < -- > HCN(aq)[/tex]
[tex]CN^{-} (aq) + H2O (l) < = > HCN (aq) + OH^{-} (aq)[/tex]
The buffer solution containing a mixture of aqueous HCN and KCN can be represented as:
[tex]HCN(aq) + CN^{-} (aq) + K^{+} (aq) < --- > HCN(aq) + KCN(aq)[/tex]
a. When a few drops of HCl are added to the buffer solution, the H+ ions from the HCl react with the CN- ions in the buffer solution to form HCN. The net ionic equation for the reaction is:
[tex]H^{+} (aq) + CN^{-} (aq) < -- > HCN(aq)[/tex]
b. When a few drops of NaOH are added to the buffer solution, the OH- ions from the NaOH react with the HCN molecules in the buffer solution to form CN- ions. The net ionic equation for the reaction is:
[tex]CN^{-} (aq) + H2O (l) < = > HCN (aq) + OH^{-} (aq)[/tex]
To know more about ionic equations go through:-
https://brainly.com/question/13879496
#SPJ4
a sample of neon is at 89c and 123 kpa. if the pressure changes to 145 kpa and the volume remains constant, what is the new temperature, in c?
The new temperature of the neon gas is 151.45°C when the pressure changes to 145 kPa and the volume remains constant.
Assuming that the amount of neon gas remains constant, we can use the combined gas law to find the new temperature. The combined gas law states that:
(P1 x V1) / T1 = (P2 x V2) / T2
where P1, V1, and T1 are the initial pressure, volume, and temperature, respectively, and P2, V2, and T2 are the final pressure, volume, and temperature, respectively. We are given P1 = 123 kPa, T1 = 89°C = 362 K, V1 = V2 (since the volume remains constant), and P2 = 145 kPa. Substituting these values into the combined gas law equation gives:
(123 kPa x V) / 362 K = (145 kPa x V) / T2
Simplifying this equation by cross-multiplying and rearranging gives:
T2 = (145 kPa x 362 K) / 123 kPa
T2 = 424.6 K
Finally, we can convert the temperature from Kelvin to Celsius by subtracting 273.15:
T2 = 424.6 K - 273.15
T2 = 151.45°C
To know more about neon, here
brainly.com/question/26929638
#SPJ4
a particular atom has a charge of -3.2 x 10^-19 c. how many electrons has it gained or lost as compared to its neutral state? remember that the charge on each electron is -1.6 x 10^-19 c.
the atom gained 2 electrons to become negatively charged.
The neutral state of an atom is the state in which the atom has an equal number of protons and electrons. Protons are positively charged particles found in the nucleus of an atom, while electrons are negatively charged particles that orbit the nucleus in shells or energy levels.
In a neutral atom, the number of positive charges (protons) is equal to the number of negative charges (electrons), resulting in a net charge of zero. This means that the atom is neither positively nor negatively charged.
Most elements in their natural state are neutral, and they only gain or lose electrons to become ions when they interact with other atoms or molecules.
If an atom has a charge of -3.2 x [tex]10^{-19} C[/tex], then it has gained 2 electrons compared to its neutral state.
This is because the charge on each electron is -1.6 x [tex]10^{-19} C[/tex], so dividing the overall charge by the charge on each electron gives:
-3.2 x [tex]10^{-19}[/tex] C / (-1.6 x [tex]10^{-19}[/tex] C/electron) = 2 electrons gained
Therefore, the atom gained 2 electrons to become negatively charged.
To know more about atom go through:-
https://brainly.com/question/17545314
#SPJ4
what is the ph of a solution where the ratio of the acidic form of serine to the basic form of serine is 60.0?
The ratio of the acidic form of serine to the basic form of serine can be expressed using the Henderson-Hasselbalch equation:
pH = pKa + log([A-]/[HA])
where pKa is the dissociation constant of serine (which is around 2.2), [A-] is the concentration of the basic form of serine, and [HA] is the concentration of the acidic form of serine.
Assuming that the total concentration of serine is 1.0 (i.e., [A-] + [HA] = 1.0), we can set up the following equation:
60 = [A-]/[HA]
or
[A-] = 60[HA]
Substituting this expression for [A-] into the Henderson-Hasselbalch equation, we get:
pH = 2.2 + log(60[HA]/[HA]) = 2.2 + log(60) = 4.8
Therefore, the pH of the solution where the ratio of the acidic form of serine to the basic form of serine is 60.0 is approximately 4.8.
To know more about Henderson-Hasselbalch equation, visit the link given below:
https://brainly.com/question/13423434
#SPJ4
what is the difference between endothermic and exothermic process in chemistry
Answer:)
In simple terms, the endothermic reactions
absorb energy from the surrounding that is
in the form of heat. On the other hand, an
exothermic reaction releases energy into the
surrounding of the system.
how many liters of 0.100 m hcl would be required to react completely with 5.00 grams of calcium hydroxide?
The balanced chemical equation for the reaction between hydrochloric acid (HCl) and calcium hydroxide (Ca(OH)2) is:
2HCl + Ca(OH)2 → CaCl2 + 2H2O
First, we need to calculate the moles of calcium hydroxide (Ca(OH)2) present in 5.00 grams:
molar mass of Ca(OH)2 = 40.08 + 2(15.99) + 2(1.01) = 74.10 g/mol
moles of Ca(OH)2 = mass / molar mass = 5.00 g / 74.10 g/mol = 0.0674 mol
According to the balanced chemical equation, 2 moles of HCl react with 1 mole of Ca(OH)2. Therefore, the number of moles of HCl required to react completely with 0.0674 mol of Ca(OH)2 is:
moles of HCl = 2 x moles of Ca(OH)2 = 2 x 0.0674 mol = 0.1348 mol
Finally, we can use the molarity (0.100 M) and the number of moles of HCl to calculate the volume of the HCl solution required:
moles = molarity x volume (in liters)
volume (in liters) = moles / molarity = 0.1348 mol / 0.100 mol/L = 1.35 L
Therefore, 1.35 liters of 0.100 M HCl are required to react completely with 5.00 grams of calcium hydroxide.
1.35 liters of 0.100 M [tex]HCl[/tex] would be required to react completely with 5.00 grams of calcium hydroxide.
To determine how many liters of 0.100 M [tex]HCl[/tex]would be required to react completely with 5.00 grams of calcium hydroxide, follow these steps:
1. Write the balanced chemical equation for the reaction:
[tex]2 HCl(aq) + Ca(OH)₂(s) → CaCl₂(aq) + 2 H₂O(l)[/tex]
2. Calculate the moles of calcium hydroxide (Ca(OH)₂):
Molar mass of [tex]Ca(OH)₂ = 40.08 (Ca) + 2 * (16.00 + 1.01) (2 * OH) = 74.10 g/mol[/tex]
Moles of[tex]Ca(OH)₂[/tex] = mass / molar mass =[tex]5.00 g / 74.10 g/mol ≈ 0.0675 mol[/tex]
3. Determine the stoichiometry between[tex]HCl[/tex] and[tex]Ca(OH)₂[/tex] from the balanced equation:
2 moles of [tex]HCl[/tex] react with 1 mole of [tex]Ca(OH)₂[/tex].
4. Calculate the moles of[tex]HCl[/tex] required to react completely with[tex]Ca(OH)₂[/tex]:
Moles of [tex]HCl = 0.0675 mol Ca(OH)₂ * (2 mol HCl / 1 mol Ca(OH)₂) = 0.135 mol HCl[/tex]
5. Determine the volume of 0.100 M[tex]HCl[/tex]needed to provide the required moles of[tex]HCl[/tex]:
Volume = moles of[tex]HCl[/tex] / molarity = 0.135 mol / 0.100 M = 1.35 L
to know more about calcium hydroxide refer here:
https://brainly.com/question/9584549#
#SPJ11
Would water, lead, air or glass allow sound to travel the fastest? Explain why, using scientific terminology
Answer:
water would allow sound to travel the fastest due to its higher density and elasticity compared to air, which makes it a better medium for transmitting sound waves.
Explanation: Answer is in explanation
Sound travels fastest in solids, and specifically in materials that are elastic, dense, and have strong intermolecular forces between their particles. Among the options given, glass is a solid, but it is not very elastic or dense, so it is not the best material for sound to travel through quickly. Lead is a dense material, but it is also very heavy and not very elastic, so it is not the best either.
Air is a gas, and gases are not very dense or elastic, so sound travels relatively slowly through them. The speed of sound in air is about 343 meters per second at standard temperature and pressure.
Water is a liquid, but it is much denser and more elastic than air, so sound travels about four times faster in water than in air, at around 1,484 meters per second.
Therefore, among the given options, water would allow sound to travel the fastest due to its higher density and elasticity compared to air, which makes it a better medium for transmitting sound waves.
of the encircled carbonyl groups in the compound below, how many of these groups could undergo reduction with sodium borohydride?
The part 2 in the attached image will undergo reduction with sodium borohydride.
Sodium borohydride (NaBH₄) is a commonly used reducing agent in organic chemistry. It is primarily used to reduce carbonyl groups (aldehydes and ketones) to their corresponding alcohols. Sodium borohydride can also reduce some other functional groups, such as imines and acid chlorides, but its reactivity towards these groups is much lower compared to carbonyls.
In general, the carbonyl groups in a molecule are the most likely functional groups to undergo reduction with sodium borohydride. Other functional groups such as alkenes, alkynes, aromatic rings, and alcohols are generally unreactive towards sodium borohydride.
Therefore, if your compound contains any carbonyl groups (such as aldehydes or ketones), those groups would be the most likely candidates for reduction with sodium borohydride. Part 2 is a carbonyl group, hence it will react.
To know more about Sodium borohydride, here
brainly.com/question/31321350
#SPJ4
if a solution originally 0.532 m in acid ha is found to have a hydronium concentration of 0.112 m at equilibrium, what is the percent ionization of the acid? remember to use correct significant figures in your answer (round your answer to the nearest tenth).
If a solution originally 0.532 m in acid ha is found to have a hydronium concentration of 0.112 m at equilibrium, what is the percent ionization of the acid is 21.1%.
When an atom, molecule, or other material loses or acquires one or more electrons, the process is known as ionization, which produces charged particles known as ions. Chemical reactions, exposure to ionizing radiation, or other physical processes can all result in this process. Ionization is the process by which an acid molecule contributes a proton (H+) to a water molecule, resulting in the formation of a hydronium ion (H3O+).
The percent ionization of an acid can be calculated using the following formula:
% ionization = [H3O+]eq / [HA]initial × 100%
where [H3O+]eq is the hydronium ion concentration at equilibrium and [HA]initial is the initial concentration of the acid.
In this case, the initial concentration of the acid is 0.532 M, and the hydronium ion concentration at equilibrium is 0.112 M.
Therefore,
% ionization = 0.112 / 0.532 × 100%
= 21.1%
Therefore, the percent ionization of the acid is 21.1% (rounded to the nearest tenth).
To learn more about ionization, refer to:
https://brainly.com/question/1445179
#SPJ4
if there is no diethyl ether in the lab, what other solvent can you use as an alternative? select one: methanol ethyl acetate tetrahydrofuran water
While considering a good solvent alternative for diethyl ether, the best one will be ethyl acetate. It can be used for extraction due to its polarity and less toxicity.
Diethyl ether is one of the commonly used solvent in extraction process of non-polar or slightly polar organic compounds. This is because it does not have hydrogen bonding. So here methanol cannot be used as it has extensive hydrogen bonding and non-polar compounds might not dissolve.
Water also cannot be used because of its polar nature. So organic compounds does not dissolve. Tetrahydrofuran can be used as a solvent, but toxicity levels are higher compared to diethyl ether.
So the alternative that can be used is ethyl acetate, which is also widely used solvent in extraction of non-polar compounds. Also it has less toxicity compared to THF.
For more details regarding organic solvents, kindly refer
https://brainly.com/question/28850026
#SPJ4
A scientist wants to perform a reaction in a vacuum chamber to control the experiment as much as possible and to prevent other variables from impacting the reaction. The scientist is trying to determine if the reaction is endothermic or exothermic and measure how much energy is absorbed or given off. Is this a valid approach? Why or why not? In three to five sentences, explain your reasoning.
Performing a reaction in a vacuum chamber to control the experiment is a valid approach to prevent external variables from impacting the reaction.
However, it may not be sufficient to determine if the reaction is endothermic or exothermic and measure the amount of energy absorbed or given off. This is because the vacuum chamber only isolates the reaction from the environment, but it does not provide a way to measure the energy changes that occur during the reaction. To measure the energy changes, the scientist should use techniques such as calorimetry, which directly measures the heat absorbed or released by the reaction.
To know more about calorimetry please refer:
https://brainly.com/question/1407669
#SPJ1
an ionic compound is prepared according to the following unbalanced chemical equation. a -g sample of contains molecules. the compound consists of by mass. what are the identities of m and x, and what is the correct name for ? starting with g each of m and , what mass of can be prepared?
Correct name is, M: Al X: Cl. The correct name for MX3 is aluminum trichloride. Starting with 1.00 g each of Al and Cl2, the maximum mass of AlCl3 that can be prepared is 2.41 g.
Use Avogadro's number to convert the number of molecules to moles:
9.26 x 10^20 molecules X × (1 mol X / 6.022 x 10^23 molecules X) = 0.0154 mol X
Since the compound MX3 has three X atoms for every M atom, we know that the number of moles of M in the sample is:
0.0154 mol X / 3 = 0.00513 mol M
Next, we can use the mass percent of X in MX3 to find the mass of X in the compound. If we assume a 100 g sample of MX3, then the mass of X in the sample would be:
60.40 g X / 100 g MX3 × 100 g = 60.40 g X
We can convert this mass to moles using the molar mass of X:
60.40 g X × (1 mol X / 39.95 g X) = 1.51 mol X
Since there are three X atoms in each molecule of MX3, we know that the total number of moles of X in 1.00 g of X2 is:
1.00 g X2 × (1 mol X2 / 31.84 g X2) × 2 mol X / 1 mol X2 = 0.0627 mol X
Similarly, the number of moles of M in 1.00 g of M is:
1.00 g M × (1 mol M / 26.98 g M) = 0.0371 mol M
The limiting reactant in the reaction to form MX3 will be the element that produces the smaller amount of product, which in this case is M. Therefore, the maximum mass of MX3 that can be prepared using 1.00 g of M and 1.00 g of X2 is:
0.0371 mol M × (1 mol MX3 / 1 mol M) × (123.32 g MX3 / 1 mol MX3) = 4.57 g MX3
To know more about compound, here
brainly.com/question/14522285
#SPJ4
--The complete question is, An ionic compound MX3 is prepared according to the following unbalanced chemical equation. M+XMX3 A 0.109-g sample of X, contains 9.26 x 1020 molecules.
The compound MX; consists of 60.40% X by mass. What are the identities of M and X? (Express your answer as a chemical symbol.)
M: X: What is the correct name for MX3?
Starting with 1.00 g each of M and of X2, what mass of MX, can be prepared?--
which of the following occurs when an ionic compound dissolves in a polar solvent such as water? select all that apply: the water molecules chemically react with the ions. the disorder of the ionic salt is decreased. the water molecules attract both the anions and cations in the ionic salt. the ions become solvated by water molecules, which reduces the electrostatic attractions between the ions.
When an ionic compound dissolves in a polar solvent such as water the ions become solvated by water molecules, which reduces the electrostatic attractions between the ions. This statement (d) is correct.
When an ionic compound is dissolved in a polar solvent like water, the ions are dissociated due to the solvation of the ionic compound. As a result, the ions become hydrated and the hydration of ions occurs by the attraction of ions to water molecules.
In general, ionic compounds dissolve in polar solvents such as water, where the water molecules surround the ions of the ionic compound. As a result, the solvation process occurs and the ions become hydrated.
The hydration process reduces the electrostatic attraction between the ions of the ionic compound, resulting in the dissociation of the ions. In summary, when an ionic compound dissolves in a polar solvent such as water, the ions become solvated by water molecules, which reduces the electrostatic attractions between the ions.
Learn more about ionic compounds here:
brainly.com/question/30420333
#SPJ11
The compound nickel(II) sulfate is a strong electrolyte. Write the reaction when solid nickel(II) sulfate is put into water.
Include states of matter.
When solid nickel(II) sulfate (NiSO4) is put into water, it dissociates completely into its constituent ions. The chemical equation for this process can be written as:
NiSO4(s) → Ni2+(aq) + SO42-(aq)
In this equation, (s) represents the solid state, while (aq) represents the aqueous state, which indicates that the ions are dissolved in water.
Nickel(II) sulfate is a soluble salt that dissociates readily in water, meaning that it is a strong electrolyte. This property allows it to conduct electricity when dissolved in water and is often used in various industrial and laboratory applications, including electroplating, catalysts, and batteries.
To know more about strong electrolyte, visit:
https://brainly.com/question/29771118
#SPJ1
if the coefficients in the redox reaction are doubled, how will the given quantities be affected for a voltaic cell under nonstandard conditions?
When the coefficients in the redox reaction are doubled, the given quantities will be affected for a voltaic cell under nonstandard conditions in the following ways.
Explanation:
An increase in the coefficients of a balanced redox reaction increases the number of moles of the reacting species. Thus, an increase in the coefficients of a redox reaction would result in an increase in the cell potential.
Furthermore, the reaction quotient Q would become smaller due to an increase in the concentrations of products and a decrease in the concentrations of reactants. This shift toward the products would make the reaction more spontaneous.The increase in coefficients would result in an increase in the molar quantities of each species, resulting in a change in the Q value. The standard EMF of the cell is unaffected since it is based solely on standard conditions. The value of ΔG, which is directly related to the potential difference in a galvanic cell, changes as the value of Q changes.
for more such question on coefficients :
https://brainly.com/question/18667947
#SPJ11
PLEASE HELP!!
Consider the equations below
H2>2H
The rest of the questions on the image
The total equation is C2H4 + C2H5 + H2 → C2H5 + C2H6 when these equations are combined together.
How are two chemical equations added?By placing all of the reactants on the left side of the equation and all of the products on the right side, you can integrate numerous reactions into a single equation. Chemical species that are present on both sides of the equation will be eliminated without change if the overall equation is simplified.
What are some instances of chemical reactions involving addition?Only chemical compounds with numerous bonds—such as molecules with carbon-carbon double bonds (alkenes), carbon-carbon triple bonds (alkynes), or molecules with carbonyl (C=O) groups—can conduct addition reactions. Consider the formula CH2=CH2 + Cl2 CH2Cl → CH2Cl.
To learn more about chemical equation visit:
brainly.com/question/30087623
#SPJ1
calculate the maximum mass of the sodium soap that can be prepared from 195 g of glyceryl trimyristate.
We must ascertain the molar mass of glyceryl trimyristate and the stoichiometric ratio of the reactants and products in the saponification reaction in order to calculate the maximum mass of sodium soap that may be produced from 195 g of glyceryl trimyristate.
The saponification of glyceryl trimyristate with sodium hydroxide (NaOH) produces three molecules of sodium soap and one molecule of glycerol:
Glyceryl trimyristate + 3 NaOH → 3 sodium soap + glycerol
The molar mass of glyceryl trimyristate is calculated as:
3 (myristic acid molar mass) + (glycerol molar mass) = 3 (228.39 g/mol) + 92.09 g/mol = 913.26 g/mol
The stoichiometric ratio of the reactants and products is 1:3, which means that for every one mole of glyceryl trimyristate, three moles of sodium soap are produced.
To calculate the maximum mass of sodium soap that can be prepared, we need to convert the given mass of glyceryl trimyristate to moles using its molar mass and then use the stoichiometric ratio to determine the maximum mass of sodium soap that can be produced:
Number of moles of glyceryl trimyristate = 195 g / 913.26 g/mol = 0.214 moles
Number of moles of sodium soap produced = 3 × 0.214 moles = 0.642 moles
Mass of sodium soap produced = number of moles × molar mass of sodium soap = 0.642 moles × 278.38 g/mol = 178.46 g
Therefore the correct answer is the maximum mass of the sodium soap that can be prepared from 195 g of glyceryl trimyristate is 178.46 g.
For more questions on: trimyristate
https://brainly.com/question/14673025
#SPJ11
which of the following gives the definition of ion-dipole attraction? select the correct answer below: ion-dipole attraction is attraction between an ion and the polar bond(s) in a nonpolar molecule. ion-dipole attraction is a physical process accompanying the dissolution of an ionic compound in which the compound's constituent ions are solvated and dispersed throughout the solution. ion-dipole attraction is the scattering of visible light by a solution. ion-dipole attraction is the electrostatic attraction between an ion and a polar molecule.
Ion-dipole attraction is the electrostatic attraction between an ion and a polar molecule. The correct answer is d.
Ion-dipole attraction is an intermolecular force that arises from the electrostatic attraction between an ion and a polar molecule. The ion is attracted to the partial charges on the polar molecule due to the separation of positive and negative charges within the molecule. This attraction is important in a variety of chemical processes, including dissolution of ionic compounds in solvents, such as water, where the solvent molecules surround and solvate the ions.
Ion-dipole interactions also play a significant role in many biological processes, such as protein folding and enzyme catalysis, as well as in industrial processes, such as separating ions in solution through methods like ion-exchange chromatography. Hence, the correct answer is d.
To know more about ion-dipole interaction, here
brainly.com/question/29658665
#SPJ4
which does not describe radon-222? group of answer choices its effects can be reduced by increasing ventilation. it exists in the igneous rock granite all around the world. it binds with hemoglobin in the blood and can lead to death. it seeps into homes through cracks in the foundation or soil. it is a radioactive gas that occurs from the natural decay of uranium
The statement that does not describe radon-222 is It binds with hemoglobin in the blood and can lead to death.
Radon-222 is a radioactive gas that occurs from the natural decay of uranium. It exists in igneous rock granite all around the world and can seep into homes through cracks in the foundation or soil. Its effects can be reduced by increasing ventilation in the affected areas.
This statement is inaccurate because radon does not bind with hemoglobin in the blood. Instead, radon gas decays into radioactive particles that can be inhaled and damage lung tissue, increasing the risk of lung cancer.
Know more about Radon-222 here :
brainly.com/question/30876043
#SPJ11
how many atoms is in Ni(C2H3O2)4
Answer:
there are 37 atoms
Explanation:
The formula for nickel(II) acetate tetrahydrate is Ni(C2H3O2)4. To calculate the number of atoms in the formula, we need to count the number of atoms of each element and then multiply each by the number of times it appears in the formula.
Ni: There is 1 Ni atom in the formula.
C: There are 8 C atoms (4 from each C2H3O2) in the formula.
H: There are 12 H atoms (3 from each C2H3O2) in the formula.
O: There are 16 O atoms (4 from each C2H3O2) in the formula.
Therefore, the total number of atoms in the formula is 1 + 8 + 12 + 16 = 37.
So there are 37 atoms in Ni(C2H3O2)4.
kingsley then adds 47.17 ml of naoh to 250.00 ml of the hcooh solution. the neutralization reaction resulted in 0.09 moles of hcooh and 0.026 moles of hcoo- left in solution. determine the ph of the resulting solution.
The pH of the resulting solution is approximately 2.46.
To determine the pH of the resulting solution after Kingsley adds 47.17 mL of NaOH to 250.00 mL of the HCOOH solution, and the neutralization reaction results in 0.09 moles of HCOOH and 0.026 moles of HCOO- left in solution, follow these steps:
1. Calculate the concentrations of HCOOH and HCOO- in the solution by dividing their moles by the total volume of the solution (in liters). The total volume is the sum of the initial HCOOH solution (250 mL) and the added NaOH (47.17 mL), which equals 297.17 mL or 0.29717 L.
- [HCOOH] = 0.09 moles / 0.29717 L = 0.303 M
- [HCOO-] = 0.026 moles / 0.29717 L = 0.087 M
2. Use the Henderson-Hasselbalch equation to calculate the pH:
- pH = pKa + log ([HCOO-] / [HCOOH])
- The pKa value for HCOOH (formic acid) is approximately 3.75.
- pH = 3.75 + log (0.087 / 0.303) = 3.75 - 1.29 = 2.46
You can learn more about neutralization reactions at: brainly.com/question/28970253
#SPJ11
we get x = 0.000882 MTherefore, the pH of the solution will be:`pH = -log[H+]``pH = -log(0.000882) = 3.055`Therefore, the pH of the resulting solution is 3.055.
Determine the pH of the resulting solution?
To determine the pH of the resulting solution, first, we need to calculate the concentration of HCOO- and HCOOH using the number of moles and volume of the solution given. Then, we can use the dissociation constant of HCOOH to calculate the concentration of H+ ions and thus the pH of the solution. Let's solve it step by step.Volume of HCOOH solution = 250.00 mlVolume of NaOH solution = 47.17 mlNumber of moles of HCOOH = 0.09 molesNumber of moles of HCOO- = 0.026 molesLet's calculate the molar concentration of HCOOH and HCOO-.
Molar concentration of HCOOH= 0.09 mol/0.250 L = 0.36 MMolar concentration of HCOO-= 0.026 mol/0.250 L = 0.104 M Now, let's calculate the concentration of H+ ions using the dissociation constant of HCOOH.`HCOOH ⇌ H+ + HCOO-``Ka = [H+][HCOO-]/[HCOOH]`Let x be the concentration of H+ ions. Then, the concentration of HCOO- ions will be x and the concentration of HCOOH ions will be 0.36 - x. Now, substituting the values in the above equation, we get:`1.8 × 10 ⁻⁴ = x(0.104)/(0.36 - x)`Solving the above equation.
Learn more about Determine the pH of the resulting solution?
brainly.com/question/30737303
#SPJ11